The Baryon acoustic oscillations from Integrated Neutral Gas Observations (BINGO) telescope is a 40-m~class radio telescope under construction that has been designed to measure the large-angular-scale intensity of HI emission at 980--1260 MHz and hence to constrain dark energy parameters. A large focal plane array comprising of 1.7-metre diameter, 4.3-metre length corrugated feed horns is required in order to optimally illuminate the telescope. Additionally, very clean beams with low sidelobes across a broad frequency range are required, in order to facilitate the separation of the faint HI emission from bright Galactic foreground emission. Using novel construction methods, a full-sized prototype horn has been assembled. It has an average insertion loss of around 0.15 dB across the band, with a return loss around -25 dB. The main beam is Gaussian with the first sidelobe at around $-25 dB. A septum polariser to separate the signal into the two hands of circular polarization has also been designed, built and tested.

With the advent of the nanosat/cubesat revolution, new opportunities have appeared to develop and launch small ($\sim$\ts 1000 cm$^3$), low-cost ($\sim$\ts US\$ 1M) experiments in space in very short timeframes ($\sim$ 2\ts years). In the field of high-energy astrophysics, in particular, it is a considerable challenge to design instruments with compelling science and competitive capabilities that can fit in very small satellite buses such as a cubesat platform, and operate them with very limited resources. Here we describe a hard X-ray (30--200\ts keV) experiment, LECX ("Localizador de Explos\~oes C\'osmicas de Raios X" -- Locator of X-Ray Cosmic Explosions), that is capable of detecting and localizing within a few degrees events like Gamma-Ray Bursts and other explosive phenomena in a 2U-cubesat platform, at a rate of $\sim${\bf 5 events year$^{-1}$.} In the current gravitational wave era of astronomy, a constellation or swarm of small spacecraft carrying instruments such as LECX can be a very cost-effective way to search for electromagnetic counterparts of gravitational wave events produced by the coalescence of compact objects.

This paper presents a new Tunable Filter Instrument for the SOAR telescope. The Brazilian Tunable Filter Imager (BTFI) is a versatile, new technology, tunable optical imager to be used in seeing-limited mode and at higher spatial fidelity using the SAM Ground-Layer Adaptive Optics facility at the SOAR telescope. The instrument opens important new science capabilities for the SOAR community, from studies of the centers of nearby galaxies and the insterstellar medium to statistical cosmological investigations. The BTFI takes advantage of three new technologies. The imaging Bragg Tunable Filter concept utilizes Volume Phase Holographic Gratings in a double-pass configuration, as a tunable filter, while a new Fabry-Perot (FP) concept involves technologies which allow a single FP etalon to act over a large range of interference orders and spectral resolutions. Both technologies will be in the same instrument. Spectral resolutions spanning the range between 25 and 30,000 can be achieved through the use of iBTF at low resolution and scanning FPs beyond R ~2,000. The third new technologies in BTFI is the use of EMCCDs for rapid and cyclically wavelength scanning thus mitigating the damaging effect of atmospheric variability through data acquisition. An additional important feature of the instrument is that it has two optical channels which allow for the simultaneous recording of the narrow-band, filtered image with the remaining (complementary) broad-band light. This avoids the uncertainties inherent in tunable filter imaging using a single detector. The system was designed to supply tunable filter imaging with a field-of-view of 3 arcmin on a side, sampled at 0.12" for direct Nasmyth seeing-limited area spectroscopy and for SAM's visitor instrument port for GLAO-fed area spectroscopy. The instrument has seen first light, as a SOAR visitor instrument. It is now in comissioning phase.