Started its regular, daily operational phase in 2011 and installed in 2009 by the occasion of the Symp264 in the XXVII IAU GA at Rio de Janeiro, the results so far obtained show that the Heliometer of the Observatorio Nacional fulfilled its planed performance of single measurement to the level of few tens of milli-arcsecond, freely pivoting around the heliolatitudes without systematic deviations or error enhancement. We present and discuss the astrometric additions required on ground based astronomic programs. We also discuss instrumental and observations terms, namely the constancy of the basic heliometric angle, against which the measurements are made, and the independence to meteorological and pointing conditions.

Measuring the solar diameter at all position angles gives the complete figure of the Sun. Their asphericities have implications in classical physics and general relativity, and the behavior of the optical systems used in the direct measurements is to be known accurately. A solar filter is a plane-parallel glass with given absorption, and here we study the departures from the parallelism of the faces of a crystal slab 5 mm thick, because of static deformations. These deformations are rescaled to the filter's dimensions. Related to the Solar Disk Sextant experiment and to the Reflecting Heliometer of Rio de Janeiro a simplified model of the influences of the inclination between the external and the internal surfaces of a glass solar filter, is discussed.

Monitoring the micro-variations of the solar diameter helps to better understand local and secular trends of solar activity and Earth climate. The instant measurements with the Reflecting Heliometer of Observatorio Nacional in Rio de Janeiro have minimized optical and thermal distortion, statistically reducing air turbulence effects down to 0.01 arcsec. Contrarily to satellites RHRJ has unlimited lifetime, and it bridges and extends the measures made with drift-scan timings across altitude circles with 0.1 arcsec rms with Astrolabes. The Astrolabe in Rio operated from 1998 to 2009 to measure the solar diameter and the detected variations have statistical significance.

Out of the three quantities that characterize the state of an isolated gaseous body: pressure, temperature and volume the radius is the only one directly measurable for the Sun, what is specially true in the optical window and for ground base measurements. The Heliometer of Observatorio Nacional, in Rio de Janeiro, measures the distance between two opposite limbs of the Sun in the same field of view, through the reflection on a 10 cm parabolic mirror split on its half and forming an appropriate angle. This configuration is free from optical aberrations and focal variations along the measurement direction. The mirrors are made on CCZ vitro-ceramic and the telescope structure is of carbon steel, resulting that there is no flexion or temperature deformation. The instrument is compact, and can perform hundreds of measurements per duty day, around all heliolatitudes. It attains an accuracy on the solar radius of 0.01 arcsec, becoming the ideal instrument to monitor from the ground the solar diameter, and to bridge satellites and astrolabes historical series of data. We discuss the first years of regular observation, with emphasis on the instrumental calibrations and on the statistic study of the derived time series, attitude series, and solar geometry series. On basis of these series we obtain how well the Heliometer and Solar Astrolabe results are matched.

The data of 2012 transit of Venus are compared with the ones of 2004. The thickness of the atmosphere of Venus, its aureole and the effect of oblateness and other asphericities in the figure of the Sun are taken into consideration, as well as the black drop effect. A new extrapolation method for the contact times is presented. The next Mercury transit in 2016 will be fully visible from Europe, and the data will be gathered in view of this new method of analysis, to obtain the solar diameter.