Within the framework of resistive MHD, implementing the C7 equilibrium atmosphere model and a 3D potential magnetic field realistic configuration, we simulate the formation of a plasm jet with the morphology, upward velocity up to 130 km/s and timescale formation between 60 and 90 s after beginning of simulation, similar to those expected for Type II spicules. Initial results of this simulation were published in Paper (e.g., Gonz\'alez-Avil\'es et al. 2018) and present paper is devoted to the analysis of transverse displacements and rotational type motion of the jet. Our results suggest that 3D magnetic reconnection may be responsible for the formation of the jet in Paper (Gonz\'alez-Avil\'es et al. 2018). In this paper, by calculating times series of the velocity components $v_x$ and $v_y$ in different points near to the jet for various heights we find transverse oscillations in agreement with spicule observations. We also obtain a time-distance plot of the temperature in a cross-cut at the plane $x=$0.1 Mm and find significant transverse displacements of the jet. By analyzing temperature isosurfaces of $10^{4}$ K with the distribution of $v_x$, we find that if the line-of-sight (LOS) is approximately perpendicular to the jet axis then there is both motion towards and away from the observer across the width of the jet. This red-blue shift pattern of the jet is caused by rotational motion, initially clockwise and anti-clockwise afterwards, which could be interpreted as torsional motion. From a nearly vertical perspective of the jet the LOS velocity component shows a central blue-shift region surrounded by red-shifted plasma.

Taking the 32 storm sudden commencements (SSCs) listed by ISGI during 2002 as a starting point, we performed a multi-criterion analysis based on observations (propagation time, velocity comparisons, sense of the magnetic field rotation, radio waves) to associate them with solar sources. We identified their effects in the interplanetary medium, and looked at the response of the terrestrial ionized and neutral environment. We find that 28 SSCs can be related to 44 coronal mass ejections (CMEs), 15 with a unique CME and 13 with a series of multiple CMEs, among which 19 involved halo CMEs; 12 of the 19 fastest CMEs with speeds greater than 1000 km/s are halo CMEs. The probability for an SSC to occur is 75% if the CME is a halo CME. The complex interactions between two CMEs and the modification of their trajectories have been examined using joint white-light and multiple-wavelength radio observations. The solar-wind structures at L1 after the shocks leading the 32 SSCs are 12 magnetic clouds (MCs), 6 interplanetary CMEs (ICMEs) without an MC structure, 4 miscellaneous structures, which cannot unambiguously be classified as ICMEs, 5 corotating or stream interaction regions (CIRs/SIRs), and 4 isolated shock events; note than one CIR caused two SSCs. The 11 MCs listed in 3 or more MC catalogs covering the year 2002 are associated with SSCs. For the 3 most intense geomagnetic storms related to MCs, we note 2 sudden increases of the Dst, at the arrival of the sheath and the arrival of the MC itself. The most geoeffective events are MCs, since 92% of them trigger moderate or intense storms, followed by ICMEs (33%). At best, CIRs/SIRs only cause weak storms. We show that these geoeffective events (ICMEs or MCs) trigger or reinforce terrestrial radiowave activity in the magnetosphere, an enhanced convection in the ionosphere, and a stronger response in the thermosphere.

Using simulated data-driven three-dimensional resistive MHD simulations of the solar atmosphere, we show that magnetic reconnection can be responsible of the formation of jets with characteristic of Type II spicules. For this, we numerically model the photosphere-corona region using the C7 equilibrium atmosphere model. The initial magnetic configuration is a 3D potential magnetic field, extrapolated up to the solar corona region from a dynamic realistic simulation of solar photospheric magnetoconvection model which is mimicking quiet-Sun. In this case we consider a uniform and constant value of the magnetic resistivity of $12.56 ~\Omega~{\rm m}$. We have found that formation of the jets depends on the Lorentz force, which helps to accelerate the plasma upwards. Analyzing various properties of the jet dynamics, we found that the jet structure shows Doppler shift near to regions with high vorticity. The morphology, upward velocity, covering a range up to 100 $\rm km$ $\rm s^{-1}$, and life-time of the estructure, bigger than 100 ${\rm s}$, are similar to those expected for Type II spicules.

Based on observations from the EUV Imaging Spectrometer (EIS) on board Hinode, the existence of a broad distribution of blue and red Dopplershift in active region loops has been revealed; the distribution of Dopplershifts depends on the peak temperature of formation of the observed spectral lines. To reproduce those observations, we use a nanoflare heating model for multi-stranded coronal loops (Sarkar and Walsh 2008, 2009) and a set of spectral lines covering a broad range of temperature (from 0.25 MK to 5.6 MK). We first show that red- and blueshifts are ubiquitous in all wavelength ranges; redshifts/downflows dominating cool spectral lines (from O V to Si VII) and blueshifts/upflows dominating the hot lines (from Fe XV to Ca XVII). These Dopplershifts are indicative of plasma condensation and evaporation. By computing the average Dopplershift, we derive a new temperature diagnostic for coronal loops: the temperature at which the average Dopplershift vanishes estimates the mean temperature of the plasma along the coronal loop and at the footpoints. To compare closely with observations, we model dense and sparse Hinode/EIS rasters at the instrument resolution. The temperature diagnostic provides the same temperature estimates as the model whatever the type of raster or the viewing angle. To conclude, we have developed a robust temperature diagnostic to measure the plasma temperature of a coronal loop using a broad range of spectral lines.

The signatures of energy release and energy transport for a kink-unstable coronal flux rope are investigated via forward modelling. Synthetic intensity and Doppler maps are generated from a 3D numerical simulation. The CHIANTI database is used to compute intensities for three Hinode/EIS emission lines that cover the thermal range of the loop. The intensities and Doppler velocities at simulation resolution are spatially degraded to the Hinode/EIS pixel size (1\arcsec), convolved using a Gaussian point-spread function (3\arcsec), and exposed for a characteristic time of 50 seconds. The synthetic images generated for rasters (moving slit) and sit-and-stare (stationary slit) are analysed to find the signatures of the twisted flux and the associated instability. We find that there are several qualities of a kink-unstable coronal flux rope that can be detected observationally using Hinode/EIS, namely the growth of the loop radius, the increase in intensity towards the radial edge of the loop, and the Doppler velocity following an internal twisted magnetic field line. However, EIS cannot resolve the small, transient features present in the simulation, such as sites of small-scale reconnection (e.g. nanoflares)

Determining the mechanisms responsible for the heating of the coronal plasma and maintaining and accelerating the solar wind are long standing goals in solar physics. There is a clear need to constrain the energy, mass and momentum flux through the solar corona and advance our knowledge of the physical process contributing to these fluxes. Furthermore, the accurate forecasting of Space Weather conditions at the near-Earth environment and, more generally, the plasma conditions of the solar wind throughout the heliosphere, require detailed knowledge of these fluxes in the near-Sun corona. Here we present a short case for a space-based imaging-spectrometer coronagraph, which will have the ability to provide synoptic information on the coronal environment and provide strict constraints on the mass, energy, and momentum flux through the corona. The instrument would ideally achieve cadences of $\sim10$~s, spatial resolution of 1" and observe the corona out to 2~$R_{\sun}$. Such an instrument will enable significant progress in our understanding of MHD waves throughout complex plasmas, as well as potentially providing routine data products to aid Space Weather forecasting.

We study the propagation of a fast magnetoacoustic wave in a 3D magnetic field created from two magnetic dipoles. The magnetic topology contains an X-line. We aim to contribute to the overall understanding of MHD wave propagation within inhomogeneous media, specifically around X-lines. We investigate the linearised, 3D MHD equations under the assumptions of ideal and cold plasma. We utilise the WKB approximation and Charpit's method during our investigation. It is found that the behaviour of the fast magnetoacoustic wave is entirely dictated by the local, inhomogeneous, equilibrium Alfv\'en speed profile. All parts of the wave experience refraction during propagation, where the magnitude of the refraction effect depends on the location of an individual wave element within the inhomogeneous magnetic field. The X-line, along which the Alfv\'en speed is identically zero, acts as a focus for the refraction effect. There are two main types of wave behaviour: part of the wave is either trapped by the X-line or escapes the system, and there exists a critical starting region around the X-line that divides these two types of behaviour. For the set-up investigated, it is found that $15.5\%$ of the fast wave energy is trapped by the X-line. We conclude that linear, $\beta=0$ fast magnetoacoustic waves can accumulate along X-lines and thus these will be specific locations of fast wave energy deposition and thus preferential heating. The work here highlights the importance of understanding the magnetic topology of a system. We also demonstrate how the 3D WKB technique described in this paper can be applied to other magnetic configurations.

The acoustic resonator is an important model for explaining the three-minute oscillations in the chromosphere above sunspot umbrae. The steep temperature gradients at the photosphere and transition region provide the cavity for the acoustic resonator, which allows waves to be both partially transmitted and partially reflected. In this paper, a new method of estimating the size and temperature profile of the chromospheric cavity above a sunspot umbra is developed. The magnetic field above umbrae is modelled numerically in 1.5D with slow magnetoacoustic wave trains travelling along magnetic fieldlines. Resonances are driven by applying the random noise of three different colours---white, pink and brown---as small velocity perturbations to the upper convection zone. Energy escapes the resonating cavity and generates wave trains moving into the corona. Line of sight (LOS) integration is also performed to determine the observable spectra through SDO/AIA. The numerical results show that the gradient of the coronal spectra is directly correlated with the chromosperic temperature configuration. As the chromospheric cavity size increases, the spectral gradient becomes shallower. When LOS integrations is performed, the resulting spectra demonstrate a broadband of excited frequencies that is correlated with the chromospheric cavity size. The broadband of excited frequencies becomes narrower as the chromospheric cavity size increases. These two results provide a potentially useful diagnostic for the chromospheric temperature profile by considering coronal velocity oscillations.

The electron plasma frequency $\omega_{pe}$ and electron gyrofrequency $\Omega_e$ are two parameters that allow us to describe the properties of a plasma and to constrain the physical phenomena at play, for instance, whether a maser instability develops. In this paper, we aim to show that the maser instability can exist in the solar corona. We perform an in-depth analysis of the $\omega_{pe}$/$\Omega_e$ ratio for simple theoretical and complex solar magnetic field configurations. Using the combination of force-free models for the magnetic field and hydrostatic models for the plasma properties, we determine the ratio of the plasma frequency to the gyrofrequency for electrons. For the sake of comparison, we compute the ratio for bipolar magnetic fields containing a twisted flux bundle, and for four different observed active regions. We also study how $\omega_{pe}$/$\Omega_e$ is affected by the potential and non-linear force-free field models. We demonstrate that the ratio of the plasma frequency to the gyrofrequency for electrons can be estimated by this novel method combining magnetic field extrapolation techniques and hydrodynamic models. Even if statistically not significant, values of $\omega_{pe}$/$\Omega_e$ $\leq$ 1 are present in all examples, and are located in the low corona near to photosphere below one pressure scale-height and/or in the vicinity of twisted flux bundles. The values of $\omega_{pe}$/$\Omega_e$ are lower for non-linear force-free fields than potential fields, thus increasing the possibility of maser instability in the corona. From this new approach for estimating $\omega_{pe}$/$\Omega_e$, we conclude that the electron maser instability can exist in the solar corona above active regions. The importance of the maser instability in coronal active regions depends on the complexity and topology of the magnetic field configurations.

Observing the Sun at high time and spatial scales is a step towards understanding the finest and fundamental scales of heating events in the solar corona. The Hi-C instrument has provided the highest spatial and temporal resolution images of the solar corona in the EUV wavelength range to date. Hi-C observed an active region on 11 July 2012, which exhibits several interesting features in the EUV line at 193\AA: one of them is the existence of short, small brightenings ``sparkling" at the edge of the active region; we call these EUV Bright Dots (EBDs). Individual EBDs have a characteristic duration of 25s with a characteristic length of 680 km. These brightenings are not fully resolved by the SDO/AIA instrument at the same wavelength, however, they can be identified with respect to the Hi-C location of the EBDs. In addition, EBDs are seen in other chromospheric/coronal channels of SDO/AIA suggesting a temperature between 0.5 and 1.5 MK. Based on their frequency in the Hi-C time series, we define four different categories of EBDs: single peak, double peak, long duration, and bursty EBDs. Based on a potential field extrapolation from an SDO/HMI magnetogram, the EBDs appear at the footpoints of large-scale trans-equatorial coronal loops. The Hi-C observations provide the first evidence of small-scale EUV heating events at the base of these coronal loops, which have a free magnetic energy of the order of 10$^{26}$ erg.

The solar atmosphere being magnetic in nature, the understanding of the structure and evolution of the magnetic field in different regions of the solar atmosphere has been an important task over the past decades. This task has been made complicated by the difficulties to measure the magnetic field in the corona, while it is currently known with a good accuracy in the photosphere and/or chromosphere. Thus, to determine the coronal magnetic field, a mathematical method has been developed based on the observed magnetic field. This is the so-called magnetic field extrapolation technique. This technique relies on two crucial points: (i) the physical assumption leading to the system of differential equations to be solved, (ii) the choice and quality of the associated boundary conditions. In this review, I summarise the physical assumptions currently in use and the findings at different scales in the solar atmosphere. I concentrate the discussion on the extrapolation techniques applied to solar magnetic data and the comparison with observations in a broad range of wavelengths (from hard X-rays to radio emission).

Plasma flows within prominences/filaments have been observed for many years and hold valuable clues concerning the mass and energy balance within these structures. Previous observations of these flows primarily come from H-alpha and cool EUV lines (e.g., 304A) where estimates of the size of the prominence threads has been limited by the resolution of the available instrumentation. Evidence of `counter-steaming' flows has previously been inferred from these cool plasma observations but now, for the first time, these flows have been directly imaged along fundamental filament threads within the million degree corona (at 193A). In this work we present observations of an active region filament observed with Hi-C that exhibits anti-parallel flows along adjacent filament threads. Complementary data from SDO/AIA and HMI are presented. The ultra-high spatial and temporal resolution of Hi-C allow the anti-parallel flow velocities to be measured (70-80 km/s) and gives an indication of the resolvable thickness of the individual strands (0.8'' +/- 0.1''). The temperature distribution of the plasma flows was estimated to be log T(K) = 5.45 +/- 0.10 using EM loci analysis. We find that SDO/AIA cannot clearly observe these anti-parallel flows nor measure their velocity or thread width due to its larger pixel size. We suggest that anti-parallel/counter-streaming flows are likely commonplace within all filaments and are currently not observed in EUV due to current instrument spatial resolution.

The interaction between emerging active regions and the pre-existing coronal magnetic field is important to understand better the mechanisms of storage and release of magnetic energy from the convection zone to the high corona. We are aiming at describing the first steps of the emergence of an active region within a pre-existing quiet-Sun corona in terms of the thermal and magnetic structure. We use unprecedented spatial, temporal and spectral coverage from the Atmospheric Imager Assembly (AIA) and from the Helioseismic and Magnetic Imager (HMI) on board the Solar Dynamics Observatory (SDO). Starting on 30 May 2010 at 17:00 UT and for 8 hours, we follow the emergence of the active region AR11076 within a quiet-Sun region. Using several SDO/AIA filters covering temperatures from 50000K to 10 MK, we show that the emerging process is characterised by a thermal shield at the interface between the emerging flux and pre-existing quiet-Sun corona. The active region 11076 can be considered as a peculiar example of emerging active region as (i) the polarities emerge in a photospheric quiet-Sun region near a supergranular-like distribution, (ii) the polarities forming the bipolar emerging structure do not rotate with respect to each other indicating a small amount of twist in the emerging flux bundle. There is a thermal shield formed at the interface between the emerging active region and the pre-existing quiet-Sun region. The thermal shielding structure deduced from all SDO/AIA channels exhibits a strong asymmetry between the two polarities of the active region suggesting that the heating mechanism for one polarity is more likely to be magnetic reconnection, whilst it is due to increasing magnetic pressure for the opposite polarity.

The Solar Dynamics Observatory (SDO) was launched in February 2010 and is now providing an unprecedented view of the solar activity at high spatial resolution and high cadence covering a broad range of temperature layers of the atmosphere. We aim at defining the structure of a polar crown cavity and describing its evolution during the erupting process. We use high cadence time series of SDO/AIA observations at 304\AA (50000 K) and 171\AA (0.6 MK) to determine the structure of the polar crown cavity and its associated plasma as well as the evolution of the cavity during the different phases of the eruption. We report on the observations recorded on 13 June 2010 located on the North-West limb. We observe coronal plasma shaped by magnetic field lines with a negative curvature (U-shape) sitting at the bottom of a cavity. The cavity is located just above the polar crown filament material. We thus observe the inner part of the cavity above the filament as depicted in the classical three part Coronal Mass Ejection (CME) model composed of a filament, a cavity and a CME front. The filament (in this case a polar crown filament) is part of the cavity and makes a continuous structuring from the filament to the CME front depicted by concentric ellipses (in a 2D cartoon). We propose to define a polar crown cavity as a density depletion sitting above denser polar crown filament plasma drained down the cavity due to gravity. As part of the polar crown filament, plasma at different temperatures (ranging from 50000K to 0.6 MK) is observed at the same location on the cavity dips and sustained by a competition between the gravity and the curvature of magnetic field lines. The eruption of the polar crown cavity as a solid body can be decomposed into two phases: a slow rise at a speed of 0.6 km/s, and an acceleration phase at a mean speed of 25 km/s.

[..] The change in the magnetic configuration due to the increase/decrease of electric current for different force-free models (potential, linear and nonlinear force-free fields) has never been studied in detail before. Here we focus especially on the evolution of the free magnetic energy, the location of the excess of energy, and the distribution of electric currents in the corona. For this purpose, we use an idealised active region characterised by four main polarities and a satellite polarity allowing us to specify a complex topology and sheared arcades to the coronal magnetic field but no twisted flux bundles. We investigate the changes in the geometry and connectivity of field lines, the magnetic energy and current density content as well as the evolution of null points. Increasing the photospheric current density in the magnetic configuration does not dramatically change the energy-storage processes within the active region even if the magnetic topology is slightly modified. We conclude that for reasonable values of the photospheric current density (the force-free parameter alpha < 0.25 Mm-1), the magnetic configurations studied do change but not dramatically: i) the original null point stays nearly at the same location, ii) the field-line geometry and connectivity are slightly modified, iii) even if the free magnetic energy is significantly increased, the energy storage happens at the same location. This extensive study of different force-free models for a simple magnetic configuration shows that some topological elements of an observed active region, such as null points, can be reproduced with confidence only by considering the potential-field approximation. This study is a preliminary work aiming at understanding the effects of electric currents generated by characteristic photospheric motions on the structure and evolution of the coronal magnetic field.

In this review, I focus on the structure and evolution of the coronal magnetic fields modelled from observations. The development of instruments measuring the photospheric and chromospheric magnetic fields with a high spatial and time resolutions allows us to improve the modeling of the coronal fields based on extrapolation and evolution techniques. In particular, I detail the advance modelling of quiet-Sun areas, active regions and full-disc evolution. I discuss the structure of coronal magnetic features such as filaments, sigmoids and coronal loops as well as their time evolution and instability. The complexity of the coronal field and the origin of open flux are also investigated in these different areas. Finally I discuss the future improvements in terms of instruments and models required to understand better the coronal field.

Nonlinear force-free solutions for the magnetic field in the solar corona constructed using photospheric vector magnetic field boundary data suffer from a basic problem: the observed boundary data are inconsistent with the nonlinear force-free model. Specifically, there are two possible choices of boundary conditions on vertical current provided by the data, and the two choices lead to different force-free solutions. A novel solution to this problem is described. Bayesian probability is used to modify the boundary values on current density, using field-line connectivity information from the two force-free solutions and taking into account uncertainties, so that the boundary data are more consistent with the two nonlinear force-free solutions. This procedure may be iterated until a set of self-consistent boundary data (the solutions for the two choices of boundary conditions are the same) is achieved. The approach is demonstrated to work in application to Hinode/SOT observations of NOAA active region 10953.

The origin and evolution of the magnetic helicity in the solar corona are not well understood. For instance, the magnetic helicity of an active region is often about $10^{42}$ Mx$^2$ ($10^{26}$ Wb$^{2}$), but the observed processes whereby it is thought to be injected into the corona do not yet provide an accurate estimate of the resulting magnetic helicity budget or time evolution. The variation in magnetic helicity is important for understanding the physics of flares, coronal mass ejections, and their associated magnetic clouds. To shed light on this topic, we investigate here the changes in magnetic helicity due to electric currents in the corona for a single twisted flux tube that may model characteristic coronal structures such as active region filaments, sigmoids, or coronal loops. For a bipolar photospheric magnetic field and several distributions of current, we extrapolated the coronal field as a nonlinear force-free field. We then computed the relative magnetic helicity, as well as the self and mutual helicities. Starting from a magnetic configuration with a moderate amount of current, the amount of magnetic helicity can increase by 2 orders of magnitude when the maximum current strength is increased by a factor of 2. The high sensitivity of magnetic helicity to the current density can partially explain discrepancies between measured values on the photosphere, in the corona, and in magnetic clouds. Our conclusion is that the magnetic helicity strongly depends on both the strength of the current density and also on its distribution. Only improved measurements of current density at the photospheric level will advance our knowledge of the magnetic helicity content in the solar atmosphere.

Nonlinear force-free field (NLFFF) models are thought to be viable tools for investigating the structure, dynamics and evolution of the coronae of solar active regions. In a series of NLFFF modeling studies, we have found that NLFFF models are successful in application to analytic test cases, and relatively successful when applied to numerically constructed Sun-like test cases, but they are less successful in application to real solar data. Different NLFFF models have been found to have markedly different field line configurations and to provide widely varying estimates of the magnetic free energy in the coronal volume, when applied to solar data. NLFFF models require consistent, force-free vector magnetic boundary data. However, vector magnetogram observations sampling the photosphere, which is dynamic and contains significant Lorentz and buoyancy forces, do not satisfy this requirement, thus creating several major problems for force-free coronal modeling efforts. In this article, we discuss NLFFF modeling of NOAA Active Region 10953 using Hinode/SOT-SP, Hinode/XRT, STEREO/SECCHI-EUVI, and SOHO/MDI observations, and in the process illustrate the three such issues we judge to be critical to the success of NLFFF modeling: (1) vector magnetic field data covering larger areas are needed so that more electric currents associated with the full active regions of interest are measured, (2) the modeling algorithms need a way to accommodate the various uncertainties in the boundary data, and (3) a more realistic physical model is needed to approximate the photosphere-to-corona interface in order to better transform the forced photospheric magnetograms into adequate approximations of nearly force-free fields at the base of the corona. We make recommendations for future modeling efforts to overcome these as yet unsolved problems.

Estimating Alfven speeds is of interest in modelling the solar corona, studying the coronal heating problem and understanding the initiation and propagation of coronal mass ejections (CMEs). We assume here that the corona is in a magnetohydrostatic equilibrium and that, because of the low plasma beta, one may decouple the magnetic forces from pressure and gravity. The magnetic field is then described by a force-free field for which we perform a statistical study of the magnetic field strength with height for four different active regions. The plasma along each field line is assumed to be in a hydrostatic equilibrium. As a first approximation, the coronal plasma is assumed to be isothermal with a constant or varying gravity with height. We study a bipolar magnetic field with a ring distribution of currents, and apply this method to four active regions associated with different eruptive events. By studying the global properties of the magnetic field strength above active regions, we conclude that (i) most of the magnetic flux is localized within 50 Mm of the photosphere, (ii) most of the energy is stored in the corona below 150 Mm, (iii) most of the magnetic field strength decays with height for a nonlinear force-free field slower than for a potential field. The Alfven speed values in an isothermal atmosphere can vary by two orders of magnitude (up to 100000 km/s). The global properties of the Alfven speed are sensitive to the nature of the magnetic configuration. For an active region with highly twisted flux tubes, the Alfven speed is significantly increased at the typical height of the twisted flux bundles; in flaring regions, the average Alfven speeds are above 5000 km/s and depart strongly from potential field values.

The POLAR Investigation of the Sun (POLARIS) mission uses a combination of a gravity assist and solar sail propulsion to place a spacecraft in a 0.48 AU circular orbit around the Sun with an inclination of 75 degrees with respect to solar equator. This challenging orbit is made possible by the challenging development of solar sail propulsion. This first extended view of the high-latitude regions of the Sun will enable crucial observations not possible from the ecliptic viewpoint or from Solar Orbiter. While Solar Orbiter would give the first glimpse of the high latitude magnetic field and flows to probe the solar dynamo, it does not have sufficient viewing of the polar regions to achieve POLARIS' primary objective : determining the relation between the magnetism and dynamics of the Sun's polar regions and the solar cycle.

To understand the physics of solar flares, including the local reorganisation of the magnetic field and the acceleration of energetic particles, we have first to estimate the free magnetic energy available for such phenomena, which can be converted into kinetic and thermal energy. The free magnetic energy is the excess energy of a magnetic configuration compared to the minimum-energy state, which is a linear force-free field if the magnetic helicity of the configuration is conserved. We investigate the values of the free magnetic energy estimated from either the excess energy in extrapolated fields or the magnetic virial theorem. For four different active regions, we have reconstructed the nonlinear force-free field and the linear force-free field corresponding to the minimum-energy state. The free magnetic energies are then computed. From the energy budget and the observed magnetic activity in the active region, we conclude that the free energy above the minimum-energy state gives a better estimate and more insights into the flare process than the free energy above the potential field state.

With the recent launch of the Hinode satellite our view of the nature and evolution of quiet-Sun regions has been improved. In light of the new high resolution observations, we revisit the study of the quiet Sun's topological nature. Topology is a tool to explain the complexity of the magnetic field, the occurrence of reconnection processes, and the heating of the corona. This Letter aims to give new insights to these different topics. Using a high-resolution Hinode/SOT observation of the line-of-sight magnetic field on the photosphere, we calculate the three dimensional magnetic field in the region above assuming a potential field. From the 3D field, we determine the existence of null points in the magnetic configuration. From this model of a continuous field, we find that the distribution of null points with height is significantly different from that reported in previous studies. In particular, the null points are mainly located above the bottom boundary layer in the photosphere (54%) and in the chromosphere (44%) with only a few null points in the corona (2%). The density of null points (expressed as the ratio of the number of null points to the number of photospheric magnetic fragments) in the solar atmosphere is estimated to be between 3% and 8% depending on the method used to identify the number of magnetic fragments in the observed photosphere. This study reveals that the heating of the corona by magnetic reconnection at coronal null points is unlikely. Our findings do not rule out the heating of the corona at other topological features. We also report the topological complexity of the chromosphere as strongly suggested by recent observations from Hinode/SOT.

Solar flares and coronal mass ejections are associated with rapid changes in field connectivity and powered by the partial dissipation of electrical currents in the solar atmosphere. A critical unanswered question is whether the currents involved are induced by the motion of pre-existing atmospheric magnetic flux subject to surface plasma flows, or whether these currents are associated with the emergence of flux from within the solar convective zone. We address this problem by applying state-of-the-art nonlinear force-free field (NLFFF) modeling to the highest resolution and quality vector-magnetographic data observed by the recently launched Hinode satellite on NOAA Active Region 10930 around the time of a powerful X3.4 flare. We compute 14 NLFFF models with 4 different codes and a variety of boundary conditions. We find that the model fields differ markedly in geometry, energy content, and force-freeness. We discuss the relative merits of these models in a general critique of present abilities to model the coronal magnetic field based on surface vector field measurements. For our application in particular, we find a fair agreement of the best-fit model field with the observed coronal configuration, and argue (1) that strong electrical currents emerge together with magnetic flux preceding the flare, (2) that these currents are carried in an ensemble of thin strands, (3) that the global pattern of these currents and of field lines are compatible with a large-scale twisted flux rope topology, and (4) that the ~10^32 erg change in energy associated with the coronal electrical currents suffices to power the flare and its associated coronal mass ejection.

With the development of new instrumentation providing measurements of solar photospheric vector magnetic fields, we need to develop our understanding of the effects of current density on coronal magnetic field configurations. The object is to understand the diverse and complex nature of coronal magnetic fields in active regions using a nonlinear force-free model. From the observed photospheric magnetic field we derive the photospheric current density for two active regions: one is a decaying active region with strong currents (AR8151), and the other is a newly emerged active region with weak currents (AR8210). We compare the three-dimensional structure of the magnetic fields for both active region when they are assumed to be either potential or nonlinear force-free. The latter is computed using a Grad-Rubin vector-potential-like numerical scheme. A quantitative comparison is performed in terms of the geometry, the connectivity of field lines, the magnetic energy and the magnetic helicity content. For the old decaying active region the connectivity and geometry of the nonlinear force-free model include strong twist and strong shear and are very different from the potential model. The twisted flux bundles store magnetic energy and magnetic helicity high in the corona (about 50 Mm). The newly emerged active region has a complex topology and the departure from a potential field is small, but the excess magnetic energy is stored in the low corona and is enough to trigger powerful flares.