Asteroseismology is a powerful tool for probing the internal structures of stars by using their natural pulsation frequencies. It relies on identifying sequences of pulsation modes that can be compared with theoretical models, which has been done successfully for many classes of pulsators, including low-mass solar-type stars, red giants, high-mass stars and white dwarfs. However, a large group of pulsating stars of intermediate mass--the so-called delta Scuti stars--have rich pulsation spectra for which systematic mode identification has not hitherto been possible. This arises because only a seemingly random subset of possible modes are excited, and because rapid rotation tends to spoil the regular patterns. Here we report the detection of remarkably regular sequences of high-frequency pulsation modes in 60 intermediate-mass main-sequence stars, allowing definitive mode identification. Some of these stars have space motions that indicate they are members of known associations of young stars, and modelling of their pulsation spectra confirms that these stars are indeed young.

Fast rotation is responsible for important changes in the structure and evolution of stars. Optical long baseline interferometry now permits the study of its effects on the stellar surface, mainly gravity darkening and flattening. We aim to determine the fundamental parameters of the fast-rotating star Altair, in particular its evolutionary stage, mass, and differential rotation, using state-of-the-art stellar interior and atmosphere models together with interferometric, spectroscopic, and asteroseismic observations. We use ESTER 2D stellar models to produce the relevant surface parameters needed to create intensity maps from atmosphere models. Interferometric and spectroscopic observables are computed from these intensity maps and several stellar parameters are then adjusted using the MCMC algorithm Emcee. We determined Altair's equatorial radius to be 2.008 +/- 0.006 Rsun, the position angle 301.1 +/- 0.3 degrees, the inclination 50.7 +/- 1.2 degrees, and the equatorial angular velocity 0.74 +/- 0.01 times the Keplerian angular velocity. This angular velocity leads to a flattening of 0.220 +/- 0.003. We also deduce from the spectroscopically derived vsini ~ 243 km/s, a true equatorial velocity of ~314 km/s corresponding to a rotation period of 7h46m (~3 c/d). The data also impose a strong correlation between mass, metallicity, hydrogen abundance, and core evolution. Thanks to asteroseismic data, we constrain the mass of Altair to 1.86 +/- 0.03 Msun and further deduce its metallicity Z = 0.019 and its core hydrogen mass fraction Xc = 0.71, assuming an initial solar hydrogen mass fraction X = 0.739. These values suggest that Altair is ~100 Myrs old. Finally, the 2D ESTER model also gives the internal differential rotation of Altair, showing that its core rotates approximately 50% faster than the envelope, while the surface differential rotation does not exceed 6%.

When modelling stars with masses larger than 1.2Msun with no observed chemical peculiarity, atomic diffusion is often neglected because, on its own, it causes unrealistic surface abundances compared with those observed. The reality is that atomic diffusion is in competition with other transport processes. The purpose of this study is to quantify the opposite or conjugated effects of atomic diffusion and rotationally induced mixing in stellar models of low mass stars. Our second goal is to estimate the impact of neglecting both rotational mixing and atomic diffusion in stellar parameter inferences for stars with masses larger than 1.3Msun. Using the AIMS code, we infer the masses and ages of a set of representative artificial stars for which models were computed with the CESTAM evolution code, taking into account rotationally induced mixing and atomic diffusion, including radiative accelerations. We show that for masses lower than 1.3Msun, rotation dominates the transport of chemical elements, and strongly reduces the effect of atomic diffusion, with net surface abundance modifications similar to solar ones. At larger mass, atomic diffusion and rotation are competing equally. Above 1.44Msun, atomic diffusion dominates in stellar models with initial rotation smaller than 80km.s-1 producing a chemical peculiarity which is not observed in Kepler-legacy stars. This indicates that a transport process of chemical elements is missing. Importantly, neglecting rotation and atomic diffusion (including radiative accelerations) in the models, when inferring the parameters of F-type stars, may lead to errors of 5%, 2.5% and 25% respectively for stellar masses, radii and ages. Atomic diffusion (including radiative accelerations) and rotational mixing should be taken into account in stellar models in order to determine accurate stellar parameters.

We present the first asteroseismic results for $\delta$ Scuti and $\gamma$ Doradus stars observed in Sectors 1 and 2 of the TESS mission. We utilise the 2-min cadence TESS data for a sample of 117 stars to classify their behaviour regarding variability and place them in the Hertzsprung-Russell diagram using Gaia DR2 data. Included within our sample are the eponymous members of two pulsator classes, $\gamma$ Doradus and SX Phoenicis. Our sample of pulsating intermediate-mass stars observed by TESS also allows us to confront theoretical models of pulsation driving in the classical instability strip for the first time and show that mixing processes in the outer envelope play an important role. We derive an empirical estimate of 74% for the relative amplitude suppression factor as a result of the redder TESS passband compared to the Kepler mission using a pulsating eclipsing binary system. Furthermore, our sample contains many high-frequency pulsators, allowing us to probe the frequency variability of hot young $\delta$ Scuti stars, which were lacking in the Kepler mission data set, and identify promising targets for future asteroseismic modelling. The TESS data also allow us to refine the stellar parameters of SX Phoenicis, which is believed to be a blue straggler.

Exoplanet properties crucially depend on their host stars' parameters. In case the exoplanet host star shows pulsations, asteroseismology can be used for an improved description of the stellar parameters. We aim to revisit the pulsational properties of beta Pic and identify its pulsation modes from normalised amplitudes in five different passbands. We also investigate the potential presence of a magnetic field. We conduct a frequency analysis using three seasons of BRITE-Constellation observations in the BRITE blue and red filters, the ~620-day long bRing light curve and the nearly 8-year long SMEI photometric time series. We calculate normalised amplitudes using all passbands including previously published values obtained from ASTEP observations. We investigate the magnetic properties of beta Pic using spectropolarimetric observations conducted with the HARPSpol instrument. Using 2D rotating models, we fit the normalised amplitudes and frequencies through Monte Carlo Markov Chains. We identify 15 pulsation frequencies in the range from 34 to 55c/d, where two display clear amplitude variability. We use the normalised amplitudes in up to five passbands to identify the modes as three l = 1, six l = 2 and six l = 3 modes. beta Pic is shown to be non-magnetic with an upper limit of the possible undetected dipolar field of 300G. Multiple fits to the frequencies and normalised amplitudes are obtained including one with a near equator-on inclination for beta Pic, which corresponds to our expectations based on the orbital inclination of beta Pic b and the orientation of the circumstellar disk. This solution leads to a rotation rate of 27% of the Keplerian break-up velocity, a radius of 1.497+-0.025Rsun, and a mass of 1.797+-0.035Msun. The ~2% errors in radius and mass do not account for uncertainties in the models and a potentially erroneous mode-identification.

The preparation of science objectives of the ESA's PLATO space mission will require the implementation of hare-and-hound exercises relying on the massive generation of representative simulated light-curves. We developed a light-curve simulator named the PLATO Solar-like Light-curve Simulator (PSLS) in order to generate light-curves representative of typical PLATO targets, i.e. showing simultaneously solar-like oscillations, stellar granulation, and magnetic activity. At the same time, PSLS also aims at mimicking in a realistic way the random noise and the systematic errors representative of the PLATO multi-telescope concept. To quantify the instrumental systematic errors, we performed a series of simulations at pixel level that include various relevant sources of perturbations expected for PLATO. From the simulated pixels, we extract the photometry as planned on-board. The simulated light-curves are then corrected for instrumental effects using the instrument Point Spread Functions reconstructed on the basis of a microscanning technique that will be operated during the in-flight calibration phases. These corrected light-curves are then fitted by a parametric model, which we incorporated in PSLS. We show that the instrumental systematic errors dominate the signal only at frequencies below 20muHz and are found to mainly depend on stellar magnitude and on the detector charge transfer inefficiency. To illustrate how realistic our simulator is, we compared its predictions with observations made by Kepler on three typical targets and found a good qualitative agreement with the observations. PSLS reproduces the main properties of expected PLATO light-curves. Its speed of execution and its inclusion of relevant stellar signals as well as sources of noises representative of the PLATO cameras make it an indispensable tool for the scientific preparation of the PLATO mission.

A key aspect in the determination of stellar properties is the comparison of observational constraints with predictions from stellar models. Asteroseismic Inference on a Massive Scale (AIMS) is an open source code that uses Bayesian statistics and a Markov Chain Monte Carlo approach to find a representative set of models that reproduce a given set of classical and asteroseismic constraints. These models are obtained by interpolation on a pre-calculated grid, thereby increasing computational efficiency. We test the accuracy of the different operational modes within AIMS for grids of stellar models computed with the Li\`ege stellar evolution code (main sequence and red giants) and compare the results to those from another asteroseismic analysis pipeline, PARAM. Moreover, using artificial inputs generated from models within the grid (assuming the models to be correct), we focus on the impact on the precision of the code when considering different combinations of observational constraints (individual mode frequencies, period spacings, parallaxes, photospheric constraints,...). Our tests show the absolute limitations of precision on parameter inferences using synthetic data with AIMS, and the consistency of the code with expected parameter uncertainty distributions. Interpolation testing highlights the significance of the underlying physics to the analysis performance of AIMS and provides caution as to the upper limits in parameter step size. All tests demonstrate the flexibility and capability of AIMS as an analysis tool and its potential to perform accurate ensemble analysis with current and future asteroseismic data yields.

Using asteroseismic data from the Kepler satellite, we explore the systematic uncertainties arising from changes in the input physics used when constructing evolution models of solar-type stars. We assess the impact of including atomic diffusion and of varying the metallicity mixture on the determination of global stellar parameters (i.e., radius, mass, and age). We find significant systematic uncertainties on global stellar parameters when diffusion is included in stellar grids. Furthermore, we find the systematic uncertainties on the global stellar parameters to be comparable to the statistical uncertainties when a different metallicity mixture is employed in stellar grids.

Oscillation modes in fast-rotating stars can be split into several subclasses, each with their own properties. To date, seismology of these stars cannot rely on regular pattern analysis and scaling relations. However, recently there has been the promising discovery of large separations observed in spectra of fast-rotating $\delta$ Scuti stars: they were attributed to the island-mode subclass, and linked to the stellar mean density through a scaling law. In this work, we investigate the relevance of this scaling relation by computing models of fast-rotating stars and their oscillation spectra. In order to sort the thousands of oscillation modes thus obtained, we train a convolutional neural network isolating the island modes with 96\% accuracy. Arguing that the observed large separation is systematically smaller than the asymptotic one, we retrieve the observational $\Delta\nu - \overline{\rho}$ scaling law. This relation will be used to drive forward modelling efforts, and is a first step towards mode identification and inversions for fast-rotating stars.

Since the CoRoT and Kepler missions, the availability of high quality seismic spectra for red giants has made them the standard clocks and rulers for Galactic Archeology. With the expected excellent data from the TESS and PLATO missions, red giants will again play a key role in Galactic studies and stellar physics, thanks to the precise masses and radii determined by asteroseismology. The determination of these quantities is often based on so-called scaling laws, which have been used extensively for main-sequence stars. We show how the SOLA inversion technique can provide robust determinations of the mean density of red giants within 1 per cent of the real value, using only radial oscillations. Combined with radii determinations from Gaia of around 2 per cent precision, this approach provides robust, less model-dependent masses with an error lower than 10 per cent. It will improve age determinations, helping to accurately dissect the Galactic structure and history. We present results on artificial data of standard models, models including an extended atmosphere from averaged 3D simulations and non-adiabatic frequency calculations to test surface effects, and on eclipsing binaries. We show that the inversions provide very robust mean density estimates, using at best seismic information. However, we also show that a distinction between red-giant branch and red-clump stars is required to determine a reliable estimate of the mean density. The stability of the inversion enables an implementation in automated pipelines, making it suitable for large samples of stars.

Asteroseismic forward modelling techniques are being used to determine fundamental properties (e.g. mass, radius, and age) of solar-type stars. The need to take into account all possible sources of error is of paramount importance towards a robust determination of stellar properties. We present a study of 34 solar-type stars for which high signal-to-noise asteroseismic data is available from multi-year Kepler photometry. We explore the internal systematics on the stellar properties, that is, associated with the uncertainty in the input physics used to construct the stellar models. In particular, we explore the systematics arising from: (i) the inclusion of the diffusion of helium and heavy elements; and (ii) the uncertainty in solar metallicity mixture. We also assess the systematics arising from (iii) different surface correction methods used in optimisation/fitting procedures. The systematics arising from comparing results of models with and without diffusion are found to be 0.5%, 0.8%, 2.1%, and 16% in mean density, radius, mass, and age, respectively. The internal systematics in age are significantly larger than the statistical uncertainties. We find the internal systematics resulting from the uncertainty in solar metallicity mixture to be 0.7% in mean density, 0.5% in radius, 1.4% in mass, and 6.7% in age. The surface correction method by Sonoi et al. and Ball & Gizon's two-term correction produce the lowest internal systematics among the different correction methods, namely, ~1%, ~1%, ~2%, and ~8% in mean density, radius, mass, and age, respectively. Stellar masses obtained using the surface correction methods by Kjeldsen et al. and Ball & Gizon's one-term correction are systematically higher than those obtained using frequency ratios.

Apart from recent progress in Gamma Dor stars, identifying modes in rapidly rotating stars is a formidable challenge due to the lack of simple, easily identifiable frequency patterns. As a result, it is necessary to look to observational methods for identifying modes. Two popular techniques are spectroscopic mode identification based on line profile variations (LPVs) and photometric mode identification based on amplitude ratios and phase differences between multiple photometric bands. In this respect, the BRITE constellation is particularly interesting as it provides space-based multi-colour photometry. The present contribution describes the latest developments in obtaining theoretical predictions for amplitude ratios and phase differences for pulsation modes in rapidly rotating stars. These developments are based on full 2D non-adiabatic pulsation calculations, using models from the ESTER code, the only code to treat in a self-consistent way the thermal equilibrium of rapidly rotating stars. These predictions are then specifically applied to the BRITE photometric bands to explore the prospects of identifying modes based on BRITE observations.

Early-type stars generally tend to be fast rotators. In these stars, mode identification is very challenging as the effects of rotation are not well known. We consider here the example of $\alpha$ Ophiuchi, for which dozens of oscillation frequencies have been measured. We model the star using the two-dimensional structure code ESTER, and we compute both adiabatic and non-adiabatic oscillations using the TOP code. Both calculations yield very complex spectra, and we used various diagnostic tools to try and identify the observed pulsations. While we have not reached a satisfactory mode-to-mode identification, this paper presents promising early results.

Context. Convective regions in stellar models are always associated with uncertainties, for example due to extra-mixing or the possible inaccurate position of the transition from convective to radiative transport of energy. These have a strong impact on stellar models and their fundamental parameters. The most promising method to reduce these uncertainties is to use asteroseismology to derive diagnostics probing the structural characteristics of these regions. Aims. We wish to use custom-made integrated quantities to improve the capabilities of seismology to probe convective regions in stellar interiors. We hope to increase the number of indicators obtained with structural seismic inversions to provide additional constraints on stellar models and the fundamental parameters determined from theoretical modeling. Methods. First, we present new kernels associated with a proxy of the entropy in stellar interiors. We then show how these kernels can be used to build custom-made integrated quantities probing convective regions inside stellar models. We present two indicators suited to probe convective cores and envelopes, respectively, and test them on artificial data. Results. We show that it is possible to probe both convective cores and envelopes using appropriate indicators obtained with structural inversion techniques. These indicators provide direct constraints on a proxy of the entropy of the stellar plasma, sensitive to the characteristics of convective regions. These constraints can then be used to improve the modeling of solar-like stars by providing an additional degree of selection of models obtained from classical forward modeling approaches. We also show that in order to obtain very accurate indicators, we need l = 3 modes for the envelope but that the core-conditions indicator is more flexible in terms of the seismic data required for its use.

The goal of AIMS (Asteroseismic Inference on a Massive Scale) is to estimate stellar parameters and credible intervals/error bars in a Bayesian manner from a set of asteroseismic frequency data and so-called classical constraints. To achieve reliable parameter estimates and computational efficiency, it searches through a grid of pre-computed models using an MCMC algorithm -- interpolation within the grid of models is performed by first tessellating the grid using a Delaunay triangulation and then doing a linear barycentric interpolation on matching simplexes. Inputs for the modelling consist of individual frequencies from peak-bagging, which can be complemented with classical spectroscopic constraints. AIMS is mostly written in Python with a modular structure to facilitate contributions from the community. Only a few computationally intensive parts have been rewritten in Fortran in order to speed up calculations.

Stellar seismic inversions have proved to be a powerful technique for probing the internal structure of stars, and paving the way for a better understanding of the underlying physics by revealing some of the shortcomings in current stellar models. In this lecture, we provide an introduction to this topic by explaining kernel-based inversion techniques. Specifically, we explain how various kernels are obtained from the pulsation equations, and describe inversion techniques such as the Regularised Least-Squares (RLS) and Optimally Localised Averages (OLA) methods.

One of the greatest challenges in interpreting the pulsations of rapidly rotating stars is mode identification, i.e. correctly matching theoretical modes to observed pulsation frequencies. Indeed, the latest observations as well as current theoretical results show the complexity of pulsation spectra in such stars, and the lack of easily recognisable patterns. In the present contribution, the latest results on non-adiabatic effects in such pulsations are described, and we show how these come into play when identifying modes. These calculations fully take into account the effects of rapid rotation, including centrifugal distortion, and are based on models from the ESTER project, currently the only rapidly rotating models in which the energy conservation equation is satisfied, a prerequisite for calculating non-adiabatic effects. Non-adiabatic effects determine which modes are excited and play a key role in the near-surface pulsation-induced temperature variations which intervene in multi-colour amplitude ratios and phase differences, as well as line profile variations.

The solar metallicity issue is a long-lasting problem of astrophysics, impacting multi- ple fields and still subject to debate and uncertainties. While spectroscopy has mostly been used to determine the solar heavy elements abundance, helioseismologists at- tempted providing a seismic determination of the metallicity in the solar convective enveloppe. However, the puzzle remains since two independent groups prodived two radically different values for this crucial astrophysical parameter. We aim at provid- ing an independent seismic measurement of the solar metallicity in the convective enveloppe. Our main goal is to help provide new information to break the current stalemate amongst seismic determinations of the solar heavy element abundance. We start by presenting the kernels, the inversion technique and the target function of the inversion we have developed. We then test our approach in multiple hare-and-hounds exercises to assess its reliability and accuracy. We then apply our technique to solar data using calibrated solar models and determine an interval of seismic measurements for the solar metallicity. We show that our inversion can indeed be used to estimate the solar metallicity thanks to our hare-and-hounds exercises. However, we also show that further dependencies in the physical ingredients of solar models lead to a low accuracy. Nevertheless, using various physical ingredients for our solar models, we determine metallicity values between 0.008 and 0.014.

Modelling the base of the solar convective envelope is a tedious problem. Since the first rotation inversions, solar modellers are confronted with the fact that a region of very limited extent has an enormous physical impact on the Sun. Indeed, it is the transition region from differential to solid body rotation, the tachocline, which furthermore is influenced by turbulence and is also supposed to be the seat of the solar magnetic dynamo. Moreover, solar models show significant disagreement with the sound speed profile in this region. In this paper, we show how helioseismology can provide further constraints on this region by carrying out an inversion of the Ledoux discriminant. We compare these inversions for Standard Solar Models built using various opacity tables and chemical abundances and discuss the origins of the discrepancies between Solar Models and the Sun.

The work reported here demonstrates that it is possible to accurately determine surface gravities of $\delta$ Sct stars using the frequency content from high precision photometry and a measurement of the parallax. Using a sample of 10 eclipsing binary systems with a $\delta$ Sct component and the unique $\delta$ Sct star discovered with a transiting planet, WASP-33, we were able to refine the $\Delta\nu-\bar\rho$ relation. Using this relation and parallaxes, we obtained independent values for the masses and radii, allowing us to calculate the surface gravities without any constraints from spectroscopic or binary analysis. A remarkably good agreement was found between our results and those published, extracted from the analysis of the radial velocities and light curves of the systems. This reinforces the potential of $\Delta\nu$ as a valuable observable for $\delta$ Sct stars and settles the degeneracy problem for the $\log g$ determination through spectroscopy.

The Sun is the most constrained and well-studied of all stars. As a consequence, the physical ingredients entering solar models are used as a reference to study all other stars observed in the Universe. However, our understanding of the solar structure is still imperfect, as illustrated by the current debate on the heavy element abundances in the Sun. We wish to provide additional information on the solar structure by carrying out structural inversions of a new physical quantity, a proxy of the entropy of the solar plasma which properties are very sensitive to the temperature gradient below the convective zone. We use new structural kernels to carry out direct inversions of an entropy proxy of the solar plasma and compare the solar structure to various standard solar models built using various opacity tables and chemical abundances. We also link our results to classical tests commonly found in the literature. Our analysis allows us to probe more efficiently the uncertain regions of the solar models, just below the convective zone, paving the way for new in-depth analyses of the Sun taking into account additional physical uncertainties of solar models beyond the specific question of chemical abundances.

The Juno spacecraft has measured Jupiter's low-order, even gravitational moments, $J_2$--$J_8$, to an unprecedented precision, providing important constraints on the density profile and core mass of the planet. Here we report on a selection of interior models based on ab initio computer simulations of hydrogen-helium mixtures. We demonstrate that a dilute core, expanded to a significant fraction of the planet's radius, is helpful in reconciling the calculated $J_n$ with Juno's observations. Although model predictions are strongly affected by the chosen equation of state, the prediction of an enrichment of $Z$ in the deep, metallic envelope over that in the shallow, molecular envelope holds. We estimate Jupiter's core to contain an 7--25 Earth mass of heavy elements. We discuss the current difficulties in reconciling measured $J_n$ with the equations of state, and with theory for formation and evolution of the planet.

Inspired by the so appealing example of red giants, where going from a handful of stars to thousands revealed the structure of the eigenspectrum, we inspected a large homogeneous set of around 1860 {\delta} Scuti stars observed with CoRoT. This unique data set reveals a common regular pattern which appears to be in agreement with island modes featured by theoretical non-perturbative treatments of fast rotation. The comparison of these data with models and linear stability calculations suggests that spectra can be fruitfully characterized to first order by a few parameters which might play the role of seismic indices for {\delta} Scuti stars, as {\Delta \nu} and {\nu_{max}} do for red giants. The existence of this pattern offers an observational support for guiding further theoretical works on fast rotation. It also provides a framework for further investigation of the observational material collected by CoRoT and Kepler. Finally, it sketches out the perspective of using {\delta} Scuti stars pulsations for ensemble asteroseismology.

In the past few years, the CoRoT and Kepler missions have carried out what is now called the space photometry revolution. This revolution is still ongoing thanks to K2 and will be continued by the Tess and Plato2.0 missions. However, the photometry revolution must also be followed by progress in stellar modelling, in order to lead to more precise and accurate determinations of fundamental stellar parameters such as masses, radii and ages. In this context, the long-lasting problems related to mixing processes in stellar interior is the main obstacle to further improvements of stellar modelling. In this contribution, we will apply structural asteroseismic inversion techniques to targets from the Kepler Legacy sample and analyse how these can help us constrain the fundamental parameters and mixing processes in these stars. Our approach is based on previous studies using the SOLA inversion technique to determine integrated quantities such as the mean density, the acoustic radius, and core conditions indicators, and has already been successfully applied to the 16Cyg binary system. We will show how this technique can be applied to the Kepler Legacy sample and how new indicators can help us to further constrain the chemical composition profiles of stars as well as provide stringent constraints on stellar ages.

Thanks to the space-based photometry missions CoRoT and Kepler, we now benefit from a wealth of seismic data for stars other than the sun. In the future, K2, Tess and Plato will provide further observations. The quality of this data may allow kernel-based linear structural inversion techniques to be used for stars other than the sun. To understand the limitations of this approach, we analyse the validity of the linear assumption used in these inversion techniques. We inspect various structural pairs and see how they are affected by structural changes. We show that uncertainties in radius strongly affect structural pairs of nondimensional variables, and that various other effects might come into play. Amongst these, the importance of micro-physics give the most striking example of how uncertainties in stellar models impact the verification of the linear relations. We also point out that including seismic constraints in the forward modelling fit helps with satisfying the linear relations.

Context: Mode identification has remained a major obstacle in the interpretation of pulsation spectra in rapidly rotating stars. Aims: We would like to test mode identification methods and seismic diagnostics in rapidly rotating stars, using oscillation spectra based on new theoretical predictions. Methods: We investigate the auto-correlation function and Fourier transform of theoretically calculated frequency spectra, in which modes are selected according to their visibilities. Given the difficulties in predicting intrinsic mode amplitudes, we experimented with various ad-hoc prescriptions for setting these, including using random values. Furthermore, we analyse the ratios between mode amplitudes observed in different photometric bands. Results: When non-random intrinsic mode amplitudes are used, our results show that it is possible to extract the large frequency separation or half its value, and sometimes twice the rotation rate, from the auto-correlation function. The Fourier transforms are mostly sensitive to the large frequency separation or half its value. When the intrinsic mode amplitudes include random factors, the results are far less favourable. We also find that amplitude ratios provide a good way of grouping together modes with similar characteristics. By analysing the frequencies of these groups, it is possible to constrain mode identification as well as determine the large frequency separation and the rotation rate.

We use asteroseismic data from the Kepler satellite to determine fundamental stellar properties of the 66 main-sequence targets observed for at least one full year by the mission. We distributed tens of individual oscillation frequencies extracted from the time series of each star among seven modelling teams who applied different methods to determine radii, masses, and ages for all stars in the sample. Comparisons among the different results reveal a good level of agreement in all stellar properties, which is remarkable considering the variety of codes, input physics and analysis methods employed by the different teams. Average uncertainties are of the order of $\sim$2\% in radius, $\sim$4\% in mass, and $\sim$10\% in age, making this the best-characterised sample of main-sequence stars available to date. Our predicted initial abundances and mixing-length parameters are checked against inferences from chemical enrichment laws $\Delta Y / \Delta Z$ and predictions from 3D atmospheric simulations. We test the accuracy of the determined stellar properties by comparing them to the Sun, angular diameter measurements, Gaia parallaxes, and binary evolution, finding excellent agreement in all cases and further confirming the robustness of asteroseismically-determined physical parameters of stars when individual frequencies of oscillation are available. Baptised as the Kepler dwarfs LEGACY sample, these stars are the solar-like oscillators with the best asteroseismic properties available for at least another decade. All data used in this analysis and the resulting stellar parameters are made publicly available for the community.

The detection and analysis of oscillations in binary star systems is critical in understanding stellar structure and evolution. This is partly because such systems have the same initial chemical composition and age. Solar-like oscillations have been detected by Kepler in both components of the asteroseismic binary HD 176465. We present an independent modelling of each star in this binary system. Stellar models generated using MESA (Modules for Experiments in Stellar Astrophysics) were fitted to both the observed individual frequencies and complementary spectroscopic parameters. The individual theoretical oscillation frequencies for the corresponding stellar models were obtained using GYRE as the pulsation code. A Bayesian approach was applied to find the probability distribution functions of the stellar parameters using AIMS (Asteroseismic Inference on a Massive Scale) as the optimisation code. The ages of HD 176465 A and HD 176465 B were found to be 2.81 $\pm$ 0.48 Gyr and 2.52 $\pm$ 0.80 Gyr, respectively. These results are in agreement when compared to previous studies carried out using other asteroseismic modelling techniques and gyrochronology.

Thanks to space-based photometry missions CoRoT and Kepler, we benefit from a wealth of seismic data for stars other than the sun. In the future, K2, Tess, and Plato will complement this data and provide observations in addition to those already at hand. The availability of this data leads to questions on how it is feasible to extend linear structural inversion techniques to stars other than the sun. Linked to this problem is the question of the validity of the linear assumption. In this study, we analyse its limitations with respect to changes of structural variables.We wish to provide a more extended theoretical background to structural linear inversions by doing a study of the validity of the linear assumption for various structural variables. First, we recall the origins of the linear assumption for structural stellar inversions and explain its importance for asteroseismic studies. We recall the impact of unknown structural quantities such as the mass and the radius of the star on structural inversion results. We explain how kernels for new structural variables can be derived using two methods, one suited to asteroseismic targets, the other to helioseismic targets. For this second method, we present a new structural pair, namely the (A, Y) structural kernels. The kernels are tested in various numerical experiments that enable us to evaluate the weaknesses of different pairs and the domains of validity of their respective linear regime. The numerical tests we carry out allow us to disentangle the impact of various uncertainties in stellar models on the verification of the linear integral relations. We show the importance of metallicity, the equation of state, extra-mixing, and inaccuracies in the microphysics. We discuss the limitations of the method of conjugated functions due to the lack of extremely precise determinations of masses or radii in the asteroseismology.

The 16Cyg binary system hosts the solar-like Kepler targets with the most stringent observational constraints. Moreover, this system is particularly interesting since both stars are very similar in mass but the A component is orbited by a red dwarf, whereas the B component is orbited by a Jovian planet and thus could have formed a more complex planetary system. In our previous study, we showed that seismic inversions of integrated quantities could be used to constrain microscopic diffusion in the A component. In this study, we analyse the B component in the light of a more regularised inversion. We wish to analyse independently the B component of the 16Cyg binary system using the inversion of an indicator dedicated to analyse core conditions, denoted tu. Using this independent determination, we wish to analyse any differences between both stars due to the potential influence of planetary formation on stellar structure and/or their respective evolution. First, we recall the observational constraints for 16CygB and the method we used to generate reference stellar models. The inversion results were then used to analyse the differences between the A and B components. The tu indicator for 16CygB shows a disagreement with models including microscopic diffusion and sharing the chemical composition previously derived for 16CygA. Small changes in chemical composition are insufficient to solve the problem but that extra mixing can account for the differences seen between both stars. We use a parametric approach to analyse the impact of extra mixing in the form of turbulent diffusion on the behaviour of the tu values. We conclude on the necessity of further investigations using models with a physically motivated implementation of extra mixing including additional constraints to further improve the accuracy with which the fundamental parameters of this system are determined.

Context: Detailed oscillation spectra comprising individual frequencies for numerous solar-type stars and red giants are or will become available. These data can lead to a precise characterisation of stars. Aims: Our goal is to test and compare different methods for obtaining stellar properties from oscillation frequencies and spectroscopic constraints, in order to evaluate their accuracy and the reliability of the error bars. Methods: In the context of the SpaceInn network, we carried out a hare-and-hounds exercise in which one group produced "observed" oscillation spectra for 10 artificial solar-type stars, and various groups characterised these stars using either forward modelling or acoustic glitch signatures. Results: Results based on the forward modelling approach were accurate to 1.5 % (radius), 3.9 % (mass), 23 % (age), 1.5 % (surface gravity), and 1.8 % (mean density). For the two 1 Msun stellar targets, the accuracy on the age is better than 10 % thereby satisfying PLATO 2.0 requirements. The average accuracies for the acoustic radii of the base of the convection zone, the He II ionisation, and the Gamma_1 peak were 17 %, 2.4 %, and 1.9 %, respectively. Glitch fitting analysis seemed to be affected by aliasing problems for some of the targets. Conclusions: Forward modelling is the most accurate approach, but needs to be complemented by model-independent results from, e.g., glitch analysis. Furthermore, global optimisation algorithms provide more robust error bars.

Delta Scuti ($\delta$ Sct) stars are intermediate-mass pulsators, whose intrinsic oscillations have been studied for decades. However, modelling their pulsations remains a real theoretical challenge, thereby even hampering the precise determination of global stellar parameters. In this work, we used space photometry observations of eclipsing binaries with a $\delta$ Sct component to obtain reliable physical parameters and oscillation frequencies. Using that information, we derived an observational scaling relation between the stellar mean density and a frequency pattern in the oscillation spectrum. This pattern is analogous to the solar-like large separation but in the low order regime. We also show that this relation is independent of the rotation rate. These findings open the possibility of accurately characterizing this type of pulsator and validate the frequency pattern as a new observable for $\delta$ Sct stars.

Constraining mixing processes and chemical composition is a central problem in stellar physics as their impact on stellar age determinations leads to biases in our studies of stellar evolution, galactic history and exoplanetary systems. In two previous papers, we showed how seismic inversion techniques could offer strong constraints on such processes by pointing out weaknesses in theoretical models. We now apply our technique to the solar analogues 16CygA and 16CygB, being amongst the best targets in the Kepler field to test the diagnostic potential of seismic inversions. The combination of various seismic indicators helps to provide more constrained and accurate fundamendal parameters for these stars. We use the latest seismic, spectroscopic and interferometric observational constraints in the litterature for this system to determine reference models independently for both stars. We carry out seismic inversions of the acoustic radius, the mean density and a core conditions indicator. We note that a degeneracy exists for the reference models. Namely, changing the diffusion coefficient or the chemical composition within the observational values leads to 5% changes in mass, 3% changes in radius and up to 8% changes in age. We use acoustic radius and mean density inversions to improve our reference models then carry out inversions for a core conditions indicator. Thanks to its sensitivity to microscopic diffusion and chemical composition mismatches, we are able to reduce the mass dispersion to 2%, namely [0.96, 1.0] M_sun, the radius dispersion to 1%, namely [1.188, 1.200] R_sun and the age dispersion to 3%, namely [7.0, 7.4] Gy, for 16CygA. For 16CygB, we can check the consistency of the models but not reduce independently the age dispersion. Nonetheless, assuming consistency with the age of 16CygA helps to further constrain its mass and radius.

Determining accurate and precise stellar ages is a major problem in astrophysics. These determinations are either obtained through empirical relations or model-dependent approaches. Currently, seismic modelling is one of the best ways of providing accurate ages. However, current methods are affected by simplifying assumptions concerning mixing processes. In this context, providing new structural indicators which are less model-dependent and more sensitive to such processes is crucial. We build a new indicator for core conditions on the main sequence, which should be more sensitive to structural differences and applicable to older stars than the indicator t presented in a previous paper. We also wish to analyse the importance of the number and type of modes for the inversion, as well as the impact of various constraints and levels of accuracy in the forward modelling process that is used to obtain reference models for the inversion. First, we present a method to obtain new structural kernels and use them to build an indicator of central conditions in stars and test it for various effects including atomic diffusion, various initial helium abundances and metallicities, following the seismic inversion method presented in our previous paper. We then study its accuracy for 7 different pulsation spectra including those of 16CygA and 16CygB and analyse its dependence on the reference model by using different constraints and levels of accuracy for its selection We observe that the inversion of the new indicator using the SOLA method provides a good diagnostic for additional mixing processes in central regions of stars. Its sensitivity allows us to test for diffusive processes and chemical composition mismatch. We also observe that octupole modes can improve the accuracy of the results, as well as modes of low radial order.

Large-scale analyses of stellar samples comprised of cool, solar-like oscillators now commonly utilize the so-called asteroseismic scaling relations to estimate fundamental stellar properties. In this paper we present a test of the scaling relation for the global asteroseismic parameter $\nu_{\rm max}$, the frequency at which a solar-like oscillator presents its strongest observed pulsation amplitude. The classic relation assumes that this characteristic frequency scales with a particular combination of surface gravity and effective temperature that also describes the dependence of the cut-off frequency for acoustic waves in an isothermal atmosphere, i.e., $\nu_{\rm max} \propto gT_{\rm eff}^{-1/2}$. We test how well the oscillations of cool main-sequence and sub-giant stars adhere to this relation, using a sample of asteroseismic targets observed by the NASA \emph{Kepler} Mission. Our results, which come from a grid-based analysis, rule out departures from the classic $gT_{\rm eff}^{-1/2}$ scaling dependence at the level of $\simeq 1.5\,\rm per cent$ over the full $\simeq 1560\,\rm K$ range in $T_{\rm eff}$ that we tested. There is some uncertainty over the absolute calibration of the scaling. However, any variation with $T_{\rm eff}$ is evidently small, with limits similar to those above.

Context: A number of pulsating stars with rotational splittings have been observed thanks to the CoRoT and Kepler missions. This is particularly true of evolved (sub-giant and giant) stars, and has led various groups to investigate their rotation profiles via different methods. Aims: We would like to set up some criteria which will help us to know whether a decreasing rotation profile, or one which satisfies Rayleigh's stability criterion, is compatible with a set of observed rotational splittings for a given reference model. Methods: We derive inequalities on the rotational splittings using a reformulated version of the equation which relates the splittings to the rotation profile and kernels. Results: These inequalities are tested out on some simple examples. The first examples show how they are able to reveal when a rotation profile is increasing somewhere or inconsistent with Rayleigh's criterion in a main sequence star, depending on the profile and the $\ell$ values of the splittings. The next example illustrates how a slight mismatch between an observed evolved star and a reference model can lead to erroneous conclusions about the rotation profile. We also show how frequency differences between the star and the model, which should normally reveal this mismatch, can be masked by frequency corrections for near-surface effects.

Massive and intermediate mass stars play a crucial role in astrophysics. Indeed, massive stars are the main producers of heavy elements, explode in supernovae at the end of their short lifetimes, and may be the progenitors of gamma ray bursts. Intermediate mass stars, although not destined to explode in supernovae, display similar phenomena, are much more numerous, and have some of the richest pulsation spectra. A key to understanding these stars is understanding the effects of rapid rotation on their structure and evolution. These effects include centrifugal deformation and gravity darkening which can be observed immediately, and long terms effects such as rotational mixing due to shear turbulence, which prolong stellar lifetime, modify chemical yields, and impact the stellar remnant at the end of their lifetime. In order to understand these effects, a number of models have been and are being developed over the past few years. These models lead to increasingly sophisticated predictions which need to be tested through observations. A particularly promising source of constraints is seismic observations as these may potentially lead to detailed information on their internal structure. However, before extracting such information, a number of theoretical and observational hurdles need to be overcome, not least of which is mode identification. The present proceedings describe recent progress in modelling these stars and show how an improved understanding of their pulsations, namely frequency patterns, mode visibilities, line profile variations, and mode excitation, may help with deciphering seismic observations.

Context. Determining stellar characteristics such as the radius, the mass or the age is crucial when studying stellar evolution, exoplanetary systems or characterising stellar populations in the Galaxy. Asteroseismology is the golden path to accurately obtain these characteristics. In this context, a key question is how to make these methods less model-dependant. Aims. Building on the work of Reese et al. (2012), we wish to extend the SOLA inversion technique to new stellar global characteristics in addition to the mean density. The goal is to provide a general framework in which to estimate these characteristics as accurately as possible in low mass main sequence stars. Methods. First, we describe our framework and discuss the reliability of the inversion technique and the possible sources of error.We then apply this methodology to the acoustic radius, an age indicator based on the sound speed derivative and the mean density and compare it to estimates based on the average large and small frequency separations. These inversions are carried out for several test cases which include: various metallicities, different mixing-lengths, non-adiabatic effects and turbulent pressure. Results. We observe that the SOLA method yields accurate results in all test cases whereas results based on the large and small frequency separations are less accurate and more sensitive to surface effects and structural differences in the models. If we include the surface corrections of Kjeldsen et al. (2008), we obtain results of comparable accuracy for the mean density. Overall, the mean density and acoustic radius inversions are more robust than the inversions for the age indicator. Moreover, the current approach is limited to relatively young stars with radiative cores. Increasing the number of observed frequencies improves the reliability and accuracy of the method.

A recent photometric survey in the NGC~3766 cluster led to the detection of stars presenting an unexpected variability. They lie in a region of the Hertzsprung-Russell (HR) diagram where no pulsation are theoretically expected, in between the $\delta$ Scuti and slowly pulsating B (SPB) star instability domains. Their variability periods, between $\sim$0.1--0.7~d, are outside the expected domains of these well-known pulsators. The NCG~3766 cluster is known to host fast rotating stars. Rotation can significantly affect the pulsation properties of stars and alter their apparent luminosity through gravity darkening. Therefore we inspect if the new variable stars could correspond to fast rotating SPB stars. We carry out instability and visibility analysis of SPB pulsation modes within the frame of the traditional approximation. The effects of gravity darkening on typical SPB models are next studied. We find that at the red border of the SPB instability strip, prograde sectoral (PS) modes are preferentially excited, with periods shifted in the 0.2--0.5~d range due to the Coriolis effect. These modes are best seen when the star is seen equator-on. For such inclinations, low-mass SPB models can appear fainter due to gravity darkening and as if they were located between the $\delta$~Scuti and SPB instability strips.

The recent variability survey of the NGC 3766 cluster revealed a considerable number of periodic variable stars in a region of the H-R diagram where no pulsation is expected. This region lies between the instability strips of the delta Scuti and SPB stars. Moreover the periods of the new phenomenon, P~0.1-0.7 d, do not allow to associate it a priori to either of these two types of pulsations. Stars in the NGC 3766 cluster are known as fast rotators with rotational velocities typically larger than half of their critical velocity. Rotation can affect both the geometrical properties and period domain of pulsations. It also alters the apparent stellar luminosity through gravity darkening, effect seldom taken considered in theoretical studies of the rotation-pulsation interaction. We explore if both of these effects are able to deliver a consistent interpretation for the observed properties of the "new variables" in NGC 3766: explaining their presence outside the known instability strips and their variability periods. We carry out an instability analysis of SPB models within the framework of the Traditional Approximation of Rotation and study the visibility of modes according to the angle of view and rotation. We also check how gravity darkening affects the effective temperature and luminosity of stellar models for different angles of view and rotation velocities. At the red (cold) border of the instability strip, prograde sectoral modes are preferentially excited and their visibilities are maximum when seen equator-on. Furthermore low-mass SPB models seen equator-on can appear in the gap between non-rotating SPB and delta Scuti stars due to gravity darkening. In that case, periods of these most visible modes are shifted to the 0.2-0.5 d range due to the effects of the Coriolis force. We hence suggest that the new variable stars observed in NGC 3766 are actually fast rotating SPB pulsators.

PLATO 2.0 has recently been selected for ESA's M3 launch opportunity (2022/24). Providing accurate key planet parameters (radius, mass, density and age) in statistical numbers, it addresses fundamental questions such as: How do planetary systems form and evolve? Are there other systems with planets like ours, including potentially habitable planets? The PLATO 2.0 instrument consists of 34 small aperture telescopes (32 with 25 sec readout cadence and 2 with 2.5 sec candence) providing a wide field-of-view (2232 deg2) and a large photometric magnitude range (4-16 mag). It focusses on bright (4-11 mag) stars in wide fields to detect and characterize planets down to Earth-size by photometric transits, whose masses can then be determined by ground-based radial-velocity follow-up measurements. Asteroseismology will be performed for these bright stars to obtain highly accurate stellar parameters, including masses and ages. The combination of bright targets and asteroseismology results in high accuracy for the bulk planet parameters: 2%, 4-10% and 10% for planet radii, masses and ages, respectively. The planned baseline observing strategy includes two long pointings (2-3 years) to detect and bulk characterize planets reaching into the habitable zone (HZ) of solar-like stars and an additional step-and-stare phase to cover in total about 50% of the sky. PLATO 2.0 will observe up to 1,000,000 stars and detect and characterize hundreds of small planets, and thousands of planets in the Neptune to gas giant regime out to the HZ. It will therefore provide the first large-scale catalogue of bulk characterized planets with accurate radii, masses, mean densities and ages. This catalogue will include terrestrial planets at intermediate orbital distances, where surface temperatures are moderate. Coverage of this parameter range with statistical numbers of bulk characterized planets is unique to PLATO 2.0.

Context : We still do not know which mechanisms are responsible for the transport of angular momentum inside stars. The recent detection of mixed modes that contain the signature of rotation in the spectra of Kepler subgiants and red giants gives us the opportunity to make progress on this issue. Aims: Our aim is to probe the radial dependance of the rotation profiles for a sample of Kepler targets. For this purpose, subgiants and early red giants are particularly interesting targets because their rotational splittings are more sensitive to the rotation outside the deeper core than is the case for their more evolved counterparts. Methods: We first extract the rotational splittings and frequencies of the modes for six young Kepler red giants. We then perform a seismic modeling of these stars using the evolutionary codes CESAM2k and ASTEC. By using the observed splittings and the rotational kernels of the optimal models, we perform inversions of the internal rotation profiles of the six stars. Results: We obtain estimates of the mean rotation rate in the core and in the convective envelope of these stars. We show that the rotation contrast between the core and the envelope increases during the subgiant branch. Our results also suggest that the core of subgiants spins up with time, contrary to the RGB stars whose core has been shown to spin down. For two of the stars, we show that a discontinuous rotation profile with a deep discontinuity reproduces the observed splittings significantly better than a smooth rotation profile. Interestingly, the depths that are found most probable for the discontinuities roughly coincide with the location of the H-burning shell, which separates the layers that contract from those that expand. These results will bring observational constraints to the scenarios of angular momentum transport in stars.

The continuous high-precision photometric observations provided by the CoRoT and Kepler space missions have allowed us to better understand the structure and dynamics of red giants using asteroseismic techniques. A small fraction of these stars shows dipole modes with unexpectedly low amplitudes. The reduction in amplitude is more pronounced for stars with higher frequency of maximum power. In this work we want to characterize KIC 8561221 in order to confirm that it is currently the least evolved star among this peculiar subset and to discuss several hypotheses that could help explain the reduction of the dipole mode amplitudes. We used Kepler short- and long-cadence data combined with spectroscopic observations to infer the stellar structure and dynamics of KIC 8561221. We then discussed different scenarios that could contribute to the reduction of the dipole amplitudes such as a fast rotating interior or the effect of a magnetic field on the properties of the modes. We also performed a detailed study of the inertia and damping of the modes. We have been able to characterize 37 oscillations modes, in particular, a few dipole modes above nu_max that exhibit nearly normal amplitudes. We have inferred a surface rotation period of around 91 days and uncovered the existence of a variation in the surface magnetic activity during the last 4 years. As expected, the internal regions of the star probed by the l = 2 and 3 modes spin 4 to 8 times faster than the surface. With our grid of standard models we are able to properly fit the observed frequencies. Our model calculation of mode inertia and damping give no explanation for the depressed dipole modes. A fast rotating core is also ruled out as a possible explanation. Finally, we do not have any observational evidence of the presence of a strong deep magnetic field inside the star.

Recent observations of rapidly rotating stars have revealed the presence of regular patterns in their pulsation spectra. This has raised the question as to their physical origin, and in particular, whether they can be explained by an asymptotic frequency formula for low-degree acoustic modes, as recently discovered through numerical calculations and theoretical considerations. In this context, a key question is whether compositional/density gradients can adversely affect such patterns to the point of hindering their identification. To answer this question, we calculate frequency spectra using two-dimensional ESTER stellar models. These models use a multi-domain spectral approach, allowing us to easily insert a compositional discontinuity while retaining a high numerical accuracy. We analyse the effects of such discontinuities on both the frequencies and eigenfunctions of pulsation modes in the asymptotic regime. We find that although there is more scatter around the asymptotic frequency formula, the semi-large frequency separation can still be clearly identified in a spectrum of low-degree acoustic modes.

Many early-type stars have been measured with high angular velocities. In such stars, mode identification is difficult as the effects of fast and differential rotation are not well known. Using fundamental parameters measured by interferometry, the ESTER structure code and the TOP oscillation code, we investigate the oscillation spectrum of Rasalhague (alpha Ophiuchi), for which observations by the MOST satellite found 57 oscillations frequencies. Results do not show a clear identification of the modes and highlight the difficulties of asteroseismology for such stars with a very complex oscillation spectrum.

Classical Cepheids form one of the foundations of modern cosmology and the extragalactic distance scale, however, cosmic microwave background observations measure cosmological parameters and indirectly the Hubble Constant, H0, to unparalleled precision. The coming decade will provide opportunities to measure H0 to 2% uncertainty thanks to the GAIA satellite, JWST, ELTs and other telescopes using Cepheids and other standard candles. In this work, we discuss the upcoming role for variable stars and asteroseismology in calibrating the distance scale and measuring H0 and what problems exist in understanding these stars that will feedback on these measurements.

Context: Calculating stellar pulsations requires a sufficient accuracy to match the quality of the observations. Many current pulsation codes apply a second order finite-difference scheme, combined with Richardson extrapolation to reach fourth order accuracy on eigenfunctions. Although this is a simple and robust approach, a number of drawbacks exist thus making fourth order schemes desirable. A robust and simple finite-difference scheme, which can easily be implemented in either 1D or 2D stellar pulsation codes is therefore required. Aims: One of the difficulties in setting up higher order finite-difference schemes for stellar pulsations is the so-called mesh-drift instability. Current ways of dealing with this defect include introducing artificial viscosity or applying a staggered grids approach. However these remedies are not well-suited to eigenvalue problems, especially those involving non-dissipative systems, because they unduly change the spectrum of the operator, introduce supplementary free parameters, or lead to complications when applying boundary conditions. Methods: We propose here a new method, inspired from the staggered grids strategy, which removes this instability while bypassing the above difficulties. Furthermore, this approach lends itself to superconvergence, a process in which the accuracy of the finite differences is boosted by one order. Results: This new approach is shown to be accurate, flexible with respect to the underlying grid, and able to remove mesh-drift.

We present and discuss results of a recently developped two dimensional non-perturbative method to compute accurate adiabatic oscillation modes of rapidly rotating stars . The 2D calculations fully take into account the centrifugal distorsion of the star while the non-perturbative method includes the full influence of the Coriolis acceleration. These characteristics allows us to compute oscillation modes of rapid rotators - from high order p-modes in $\delta$Scuti stars, to low order p- and g-modes in $\beta$ Cephei or Be stars.

Context: Mode identification is a crucial step to comparing observed frequencies with theoretical ones, but has proven to be difficult in rapidly rotating stars. Aims: To further constrain mode identification, we aim to accurately calculate mode visibilities and amplitude ratios in rapid rotators. Methods: We derive the relevant equations for calculating mode visibilities in different photometric bands while fully taking into account the geometric distortion from both the centrifugal deformation and the pulsation modes, the variations in effective gravity, and an approximate treatment of the temperature variations. These equations are then applied to 2D oscillation modes, calculated using the TOP code, in fully distorted 2D models based on the SCF method. The specific intensities come from a grid of Kurucz atmospheres, thereby taking into account limb and gravity darkening. Results: We obtain mode visibilities and amplitude ratios for 2 M_{\odot} models rotating at 0 to 80 % of the critical rotation rate. These calculations confirm previous results, such as the increased visibility of chaotic modes, the simpler frequency spectra of pole-on stars, or the dependence of amplitude ratios on inclination and azimuthal order. In addition, the geometric shape of the star reduces the contrast between pole-on and equator-on visibilities of island modes. We also show that modes with similar (ell, |m|) values frequently have similar amplitude ratios, even in the most rapidly rotating models.

Very high precision seismic space missions such as CoRoT and Kepler provide the means of testing the modeling of transport processes in stellar interiors. For some stars, such as solar-like and red giant stars, a rotational splitting is measured. However, in order to fully exploit these splittings and constrain the rotation profile, one needs to be able to calculate them accurately. For some other stars, such as $\delta$ Scuti and Be stars, for instance, the observed pulsation spectra are modified by rotation to such an extent that a perturbative treatment of the effects of rotation is no longer valid. We present here a new two-dimensional non-perturbative code, called ACOR (\textit{Adiabatic Code of Oscillation including Rotation}) which allows us to compute adiabatic non-radial pulsations of rotating stars, without making any assumptions on the sphericity of the star, the fluid properties (i.e. baroclinicity) or the rotation profile. The 2D non-perturbative calculations fully take into account the centrifugal distortion of the star and include the full influence of the Coriolis acceleration. The numerical method is based on a spectral approach for the angular part of the modes, and a fourth-order finite differences approach for the radial part. We test and evaluate the accuracy of the calculations by comparing them with those coming from TOP (\textit{Two-dimensional Oscillation Program}) for the same polytropic models. We illustrate the effects of rapid rotation on stellar pulsations through the phenomenon of avoided crossings. As shown by the comparison with TOP for simple models, the code is stable, and gives accurate results up to near-critical rotation rates.

We used extensive ground-based multisite and archival spectroscopy to derive observational constraints for a seismic modelling of the magnetic beta Cep star V2052 Ophiuchi. The line-profile variability is dominated by a radial mode (f_1=7.14846 d^{-1}) and by rotational modulation (P_rot=3.638833 d). Two non-radial low-amplitude modes (f_2=7.75603 d^{-1} and f_3=6.82308 d^{-1}) are also detected. The four periodicities that we found are the same as the ones discovered from a companion multisite photometric campaign (Handler et al. 2012) and known in the literature. Using the photometric constraints on the degrees l of the pulsation modes, we show that both f_2 and f_3 are prograde modes with (l,m)=(4,2) or (4,3). These results allowed us to deduce ranges for the mass (M \in [8.2,9.6] M_o) and central hydrogen abundance (X_c \in [0.25,0.32]) of V2052 Oph, to identify the radial orders n_1=1, n_2=-3 and n_3=-2, and to derive an equatorial rotation velocity v_eq \in [71,75] km s^{-1}. The model parameters are in full agreement with the effective temperature and surface gravity deduced from spectroscopy. Only models with no or mild core overshooting (alpha_ov \in [0,0.15] local pressure scale heights) can account for the observed properties. Such a low overshooting is opposite to our previous modelling results for the non-magnetic beta Cep star theta Oph having very similar parameters, except for a slower surface rotation rate. We discuss whether this result can be explained by the presence of a magnetic field in V2052 Oph that inhibits mixing in its interior.

Rotation is expected to have an important influence on the structure and the evolution of stars. However, the mechanisms of angular momentum transport in stars remain theoretically uncertain and very complex to take into account in stellar models. To achieve a better understanding of these processes, we desperately need observational constraints on the internal rotation of stars, which until very recently were restricted to the Sun. In this paper, we report the detection of mixed modes - i.e. modes that behave both as g modes in the core and as p modes in the envelope - in the spectrum of the early red giant KIC7341231, which was observed during one year with the Kepler spacecraft. By performing an analysis of the oscillation spectrum of the star, we show that its non-radial modes are clearly split by stellar rotation and we are able to determine precisely the rotational splittings of 18 modes. We then find a stellar model that reproduces very well the observed atmospheric and seismic properties of the star. We use this model to perform inversions of the internal rotation profile of the star, which enables us to show that the core of the star is rotating at least five times faster than the envelope. This will shed new light on the processes of transport of angular momentum in stars. In particular, this result can be used to place constraints on the angular momentum coupling between the core and the envelope of early red giants, which could help us discriminate between the theories that have been proposed over the last decades.

We present an asymptotic theory that describes regular frequency spacings of pressure modes in rapidly rotating stars. We use an asymptotic method based on an approximate solution of the pressure wave equation constructed from a stable periodic solution of the ray limit. The approximate solution has a Gaussian envelope around the stable ray, and its quantization yields the frequency spectrum. We construct semi-analytical formulas for regular frequency spacings and mode spatial distributions of a subclass of pressure modes in rapidly rotating stars. The results of these formulas are in good agreement with numerical data for oscillations in polytropic stellar models. The regular frequency spacings depend explicitly on internal properties of the star, and their computation for different rotation rates gives new insights on the evolution of mode frequencies with rotation.

Determining the mass of stars is crucial both to improving stellar evolution theory and to characterising exoplanetary systems. Asteroseismology offers a promising way to estimate stellar mean density. When combined with accurate radii determinations, such as is expected from GAIA, this yields accurate stellar masses. The main difficulty is finding the best way to extract the mean density from a set of observed frequencies. We seek to establish a new method for estimating stellar mean density, which combines the simplicity of a scaling law while providing the accuracy of an inversion technique. We provide a framework in which to construct and evaluate kernel-based linear inversions which yield directly the mean density of a star. We then describe three different inversion techniques (SOLA and two scaling laws) and apply them to the sun, several test cases and three stars. The SOLA approach and the scaling law based on the surface correcting technique described by Kjeldsen et al. (2008) yield comparable results which can reach an accuracy of 0.5 % and are better than scaling the large frequency separation. The reason for this is that the averaging kernels from the two first methods are comparable in quality and are better than what is obtained with the large frequency separation. It is also shown that scaling the large frequency separation is more sensitive to near-surface effects, but is much less affected by an incorrect mode identification. As a result, one can identify pulsation modes by looking for an l and n assignment which provides the best agreement between the results from the large frequency separation and those from one of the two other methods. Non-linear effects are also discussed as is the effects of mixed modes. In particular, it is shown that mixed modes bring little improvement as a result of their poorly adapted kernels.

We present complete 2D computations of g modes in distorted polytropic models of stars performed with the Two-dimensional Oscillation Program (TOP). We computed low-degree modes (l=1 modes with radial order n=-1...-14, and l=2,3 modes with n=-1...-5 and -16...-20) of a nonrotating model and followed them by slowly increasing the rotation rate up to 70 % of the Keplerian break-up velocity. We use these computations to determine the domain of validity of perturbative methods up to the 3rd order. We study the evolution of the regularities of the spectrum and show quantitative agreement with the traditional approximation for not too large values of the ratio of the rotation rate to the pulsation frequency. We also show the appearance of new types of modes, called "rosette" modes due to their spatial structure. Thanks to the ray theory for gravito-inertial waves that we developed, we can associate these modes with stable periodic rays.

Despite more and more observational data, stellar acoustic oscillation modes are not well understood as soon as rotation cannot be treated perturbatively. In a way similar to semiclassical theory in quantum physics, we use acoustic ray dynamics to build an asymptotic theory for the subset of regular modes which are the easiest to observe and identify. Comparisons with 2D numerical simulations of oscillations in polytropic stars show that both the frequency and amplitude distributions of these modes can accurately be described by an asymptotic theory for almost all rotation rates. The spectra are mainly characterized by two quantum numbers; their extraction from observed spectra should enable one to obtain information about stellar interiors.

Pulsation frequencies of acoustic modes are calculated for realistic rotating stellar models using both a perturbative and a two-dimensional approach. A comparison between the two yields validity domains which are similar to those previously obtained in Reese, Lignieres and Rieutord (2006) for polytropic models. One can also construct validity domains based on polynomial fits to the frequencies from the two-dimensional approach, and these also turn out to be similar, thus further confirming the agreement between the perturbative and two-dimensional approach at low rotation rates. Furthermore, as was previously shown in Espinosa, Perez Hernandez and Roca Cortes (2004), adjacent frequencies in multiplets come close together, thus forming pairs. This phenomena, exclusive to two-dimensional calculations, is shown to be an unlikely explanation of the close frequency pairs observed in delta Scuti stars. A systematic search for all close frequency pairs in the calculated spectrum is also carried out. The number of close frequency pairs is shown to agree with what is expected based on a Poisson distribution, but does not match the number or distribution of close pairs in stars like FG Vir. Furthermore, a lack of close frequency pairs appears at low rotation rates, where frequency multiplets do not overlap. Delta Scuti stars currently reported as having close frequency pairs do not fall in this interval.

This work aims at determining the impact of slow to moderate rotation on the regular patterns often present in solar-like oscillation spectra. We focus on the well-known asteroseismic diagnostic echelle diagrams, examining how rotation may modify the estimates of the large and small spacings, as well as the identification of modes. We illustrate the work with a real case: the solar-like star $\eta$ Bootis. The modeling takes into account rotation effects on the equilibrium models through an effective gravity and on the oscillation frequencies through both perturbative and non-perturbative calculations. We compare the results of both type of calculations in the context of the regular spacings (like the small spacings and the scaled small spacings) and echelle diagrams. We show that for echelle diagrams the perturbative approach remains valid for rotational velocities up to 40-50 km/s. We show that for the rotational velocities measured in solar-like stars, theoretical oscillation frequencies must be corrected up to the second-order in terms of rotation rate, including near degeneracy effects. For rotational velocities of about 16 km/S and higher, diagnostics on large spacings and on modal identification through echelle diagrams can be significantly altered by the presence of the $m\neq0$ components of the rotationally split modes. We found these effects to be detectable in the observed frequency range. Analysis of the effects of rotation on small spacings and scaled small spacings reveals that these can be of the order of, or even larger than surface effects, typically turbulence, microscopic diffusion, etc. Furthermore, we show that scaled spacings are significantly affected by stellar distortion even for small stellar rotational velocities (from 10-15 km/s) and therefore some care must be taken when using them as indicators for probing deep stellar interiors.

CoRoT and Kepler missions are now providing high-quality asteroseismic data for a large number of stars. Among intermediate-mass and massive stars, fast rotators are common objects. Taking the rotation effects into account is needed to correctly understand, identify, and interpret the observed oscillation frequencies of these stars. A classical approach is to consider the rotation as a perturbation. In this paper, we focus on gravity modes, such as those occurring in gamma Doradus, slowly pulsating B (SPB), or Be stars. We aim to define the suitability of perturbative methods. With the two-dimensional oscillation program (TOP), we performed complete computations of gravity modes -including the Coriolis force, the centrifugal distortion, and compressible effects- in 2-D distorted polytropic models of stars. We started with the modes l=1, n=1-14, and l=2-3, n=1-5,16-20 of a nonrotating star, and followed these modes by increasing the rotation rate up to 70% of the break-up rotation rate. We then derived perturbative coefficients and determined the domains of validity of the perturbative methods. Second-order perturbative methods are suited to computing low-order, low-degree mode frequencies up to rotation speeds ~100 km/s for typical gamma Dor stars or ~150 km/s for B stars. The domains of validity can be extended by a few tens of km/s thanks to the third-order terms. For higher order modes, the domains of validity are noticeably reduced. Moreover, perturbative methods are inefficient for modes with frequencies lower than the Coriolis frequency 2Omega. We interpret this failure as a consequence of a modification in the shape of the resonant cavity that is not taken into account in the perturbative approach.

Using the Two-dimensional Oscillation Program (TOP), we have explored the effects of rapid rotation on gravity modes in polytropic stars. Coriolis force, centrifugal distortion as well as compressible effects have been taken into account. Thanks to our complete calculation, we have first studied the validity domain of perturbative methods and started to explore properties of these modes. We focus on l=1 in this analysis.

Context: Recent calculations of pulsation modes in rapidly rotating polytropic models and models based on the Self-Consistent Field method (MacGregor et al. 2007) have shown that the frequency spectrum of low degree pulsation modes can be described by an empirical formula similar to Tassoul's asymptotic formula (Tassoul 1980), provided that the underlying rotation profile is not too differential (Lignieres & Georgeot 2008, Reese et al. 2009). Aims: Given the simplicity of this asymptotic formula, we investigate whether it can provide a means by which to identify pulsation modes in rapidly rotating stars. Methods: We develop a new mode identification scheme which consists in scanning a multidimensional parameter space for the formula coefficients which yield the best-fitting asymptotic spectra. This mode identification scheme is then tested on artificial spectra based on the asymptotic formula, on random frequencies and on spectra based on full numerical eigenmode calculations for which the mode identification is known beforehand. We also investigate the effects of adding random frequencies to mimic the effects of chaotic modes which are also expected to show up in such stars (Lignieres & Georgeot 2008).

Context: New observational means such as the space missions CoRoT and Kepler and ground-based networks are and will be collecting stellar pulsation data with unprecedented accuracy. A significant fraction of the stars in which pulsations are observed are rotating rapidly. Aims: Our aim is to characterise pulsation modes in rapidly rotating stellar models so as to be able to interpret asteroseismic data from such stars. Methods: The pulsation code developed in Ligni\`eres et al. (2006) and Reese et al. (2006) is applied to stellar models based on the self-consistent field (SCF) method (Jackson et al. 2004, 2005, MacGregor et al. 2007). Results: Pulsation modes in SCF models follow a similar behaviour to those in uniformly rotating polytropic models, provided that the rotation profile is not too differential. Pulsation modes fall into different categories, the three main ones being island, chaotic, and whispering gallery modes, which are rotating counterparts to modes with low, medium, and high l-|m| values, respectively. The frequencies of the island modes follow an asymptotic pattern quite similar to what was found for polytropic models. Extending this asymptotic formula to higher azimuthal orders reveals more subtle behaviour as a function of m and provides a first estimate of the average advection of pulsation modes by rotation. Further calculations based on a variational principle confirm this estimate and provide rotation kernels that could be used in inversion methods. When the rotation profile becomes highly differential, it becomes more and more difficult to find island and whispering gallery modes at low azimuthal orders. At high azimuthal orders, whispering gallery modes, and in some cases island modes, reappear.

Context: Rapid rotation modifies the structure of the frequency spectrum of pulsating stars, thus making mode identification difficult. Aims: We look for new forms of organisation for the frequency spectrum that can provide a basis for mode identification at high rotation rates. Methods: Acoustic modes in uniformly rotating polytropic models of stars are computed using a numerical code that fully takes the effects of rotation (centrifugal distortion and Coriolis acceleration) into account. All low-degree modes, l=0 to 3, with radial orders n=1-10 and 21-25 for N=3 polytropic models and n=1-10 for N=1.5 polytropic models are followed from a zero rotation rate up to 59 % of the break-up velocity. Results: We find an empirical formula that gives a good description of the high-frequency range of the computed acoustic spectrum for high rotation rates. Differences between this formula and complete eigenmode calculations are shown to be substantially smaller than those obtained with a third order perturbative method valid at low rotation rates.

Context: With the launch of space missions devoted to asteroseismology (like COROT), the scientific community will soon have accurate measurements of pulsation frequencies in many rapidly rotating stars. Aims: The present work focuses on the effects of rotation on pulsations of rapidly rotating stars when both the Coriolis and centrifugal accelerations require a non-perturbative treatment. Method: We develop a 2-dimensional spectral numerical approach which allows us to compute acoustic modes in centrifugally distorted polytropes including the full influence of the Coriolis force. This method is validated through comparisons with previous studies, and the results are shown to be highly accurate. Results: In the frequency range considered and with COROT's accuracy, we establish a domain of validity for perturbative methods, thus showing the need for complete calculations beyond v.sin i = 50 km/s for a R = 2.3 R_\odot, M = 1.9 M_\odot polytropic star. Furthermore, it is shown that the main differences between complete and perturbative calculations come essentially from the centrifugal distortion.

A new non-perturbative method to compute accurate oscillation modes in rapidly rotating stars is presented. In this paper, the effect of the centrifugal force is fully taken into account while the Coriolis force is neglected. This assumption is valid when the time scale of the oscillation is much shorter than the inverse of the rotation rate and is expected to be suitable for high radial order p-modes of $\delta$ Scuti stars. Axisymmetric p-modes have been computed in uniformly rotating polytropic models of stars. In the frequency and rotation range considered, we found that as rotation increases (i) the asymptotic structure of the non-rotating frequency spectrum is first destroyed then replaced by a new form of organization (ii) the mode amplitude tends to concentrate near the equator (iii) differences with perturbative methods become significant as soon as the rotation rate exceeds about fifteen percent of the Keplerian limit. The implications for the seismology of rapidly rotating stars are then discussed.

We carry out numerical and mathematical investigations of shear Alfven waves inside of a spherical shell filled with an incompressible conducting fluid, and bathed in a strong dipolar magnetic field. We focus on axisymmetric toroidal and non-axisymmetric modes, in continuation of a previous work by Rincon & Rieutord (2003, A&A, 398, 663). Analytical expressions are obtained for toroidal eigenmodes and their corresponding frequencies at low diffusivities. These oscillations behave like magnetic shear layers, in which the magnetic poles play a key role, and hence become singular when diffusivities vanish. It is also demonstrated that non-axisymmetric modes are split into two categories, namely poloidal or toroidal types, following similar asymptotic behaviours as their axisymmetric counterparts when the diffusivities become arbitrarily small.