A 3-day international workshop on atmospheric monitoring and calibration for high-energy astroparticle detectors, with a view towards next-generation facilities. The atmosphere is an integral component of many high-energy astroparticle detectors. Imaging atmospheric Cherenkov telescopes and cosmic-ray extensive air shower detectors are the two instruments driving the rapidly evolving fields of very-high- and ultra-high-energy astrophysics. In these instruments, the atmosphere is used as a giant calorimeter where cosmic rays and gamma rays deposit their energy and initiate EASs; it is also the medium through which the resulting Cherenkov light propagates. Uncertainties in real-time atmospheric conditions and in the fixed atmospheric models typically dominate all other systematic errors. With the improved sensitivity of upgraded IACTs such as H.E.S.S.-II and MAGIC-II and future facilities like the Cherenkov Telescope Array (CTA) and JEM-EUSO, statistical uncertainties are expected to be significantly reduced, leaving the atmosphere as the limiting factor in the determination of astroparticle spectra. Varying weather conditions necessitate the development of suitable atmospheric monitoring to be integrated in the overall instrument calibration, including Monte Carlo simulations. With expertise distributed across multiple collaborations and scientific domains, an interdisciplinary workshop is being convened to advance progress on this critical and timely topic.

At CEILAP (CITEDEF-CONICET), a multiangle LIDAR is under development to monitor aerosol extinction coefficients in the frame of the CTA (Cherenkov Telescope Array) Project. This is an initiative to build the next generation of ground-based instruments to collect very high energy gamma-ray radiation (>10 GeV). The atmospheric conditions are very important for CTA observations, and LIDARs play an important role in the measurement of the aerosol optical depth at any direction. The LIDAR being developed at CEILAP was conceived to operate in harsh environmental conditions during the shifts, and these working conditions may produce misalignments. To minimize these effects, the telescopes comprising the reception unit are controlled by a self-alignment system. This paper describes the self-alignment method and hardware automation.

This paper discusses the multi-wavelength scanning Raman lidar being built at Lidar Division, CEILAP (CITEDEF-CONICET) in the frame of the Argentinean Cherenkov Telescope Array (CTA) collaboration to measure the spectral characteristics of the atmospheric aerosol extinction profiles to provide better transmission calculations at the future CTA site. This lidar emits short laser pulses of 7-9 ns at 355, 532 and 1064 nm at 50 Hz with nominal energy of 125 mJ at 1064 nm. This wavelengths are also used to retrieve the atmospheric (air, aerosol and clouds) backscattered radiation in the UV, VIS and IR ranges. Raman capabilities were added in the UV and VIS wavelengths to retrieve the spectral characteristics of the aerosol extinction and the water vapor profile. Due to the expected low aerosol optical depth of the future site, the short observation period as well as the extension of the observation, an enhanced collection area is required. This system uses six 40 cm f/2.5 newtonian telescopes to avoid dealing with bigger mirror deformation, aberration issues and higher costs that imply the use of a single mirror with the same collection surface. In addition, dismounting of single mirrors for replacement or recoating will affect slightly the performance but not the operation. The additional alignment procedure has been solved by an automatic mirror alignment to follow the line of sight of the observation during the acquisition period. The system was designed to operate in hard environmental conditions, as it is completely exposed to the outside weather conditions, when its shelter is fully opened to provide 360{\deg} observations.