Normalized to: Rateau, S.
[1]
oai:arXiv.org:1509.04138 [pdf] - 1938130
Cooling Tests of the NectarCAM camera for the Cherenkov Telescope Array
Moulin, E.;
Diaz, C.;
Durand, D.;
Feirreira, O.;
Fesquet, M.;
Giebels, B.;
Glicenstein, J. -F.;
Loiseau, D.;
Louis, F.;
Nunio, F.;
Rateau, S.
Submitted: 2015-09-14, last modified: 2015-09-15
The NectarCAM is a camera proposed for the medium-sized telescopes in the
framework of the Cherenkov Telescope Array (CTA), the next-generation
observatory for very-high-energy gamma-ray astronomy. The cameras are designed
to operate in an open environment and their mechanics must provide protection
for all their components under the conditions defined for the CTA observatory.
In order to operate in a stable environment and ensure the best physics
performance, each NectarCAM will be enclosed in a slightly overpressurized,
nearly air-tight, camera body, to prevent dust and water from entering. The
total power dissipation will be ~7.7 kW for a 1855-pixel camera. The largest
fraction is dissipated by the readout electronics in the modules. We present
the design and implementation of the cooling system together with the test
bench results obtained on the NectarCAM thermal demonstrator.
[3]
oai:arXiv.org:1508.06555 [pdf] - 1267007
NectarCAM : a camera for the medium size telescopes of the Cherenkov
Telescope Array
Glicenstein, J-F.;
Abril, O.;
Barrio, J-A.;
Blanch~Bigas, O.;
Bolmont, J.;
Bouyjou, F.;
Brun, P.;
Chabanne, E.;
Champion, C.;
Colonges, S.;
Corona, P.;
Delagnes, E.;
Delgado, C.;
Ginzov, C. Diaz;
Durand, D.;
Ernenwein, J-P.;
Fegan, S.;
Ferreira, O.;
Fesquet, M.;
Fiasson, A.;
Fontaine, G.;
Fouque, N.;
Gascon, D.;
Giebels, B.;
Henault, F.;
Hermel, R.;
Hoffmann, D.;
Horan, D.;
Houles, J.;
Jean, P.;
Jocou, L.;
Karkar, S.;
Knoedlseder, J.;
Kossakowski, R.;
Lamanna, G.;
LeFlour, T.;
Lenain, J-P.;
Leveque, A.;
Louis, F.;
Martinez, G.;
Moudden, Y.;
Moulin, E.;
Nayman, P.;
Nunio, F.;
Olive, J-F.;
Panazol, J-L.;
Pavy, S.;
Petrucci, P-O.;
Pierre, E.;
Prast, J.;
Punch, M.;
Ramon, P.;
Rateau, S.;
Ravel, T.;
Rosier-Lees, S.;
Sanuy, A.;
Shayduk, M.;
Sizun, P-Y.;
Sulanke, K-H.;
Tavernet, J-P.;
Tejedor~Alvarez, L-A.;
Toussenel, F.;
Vasileiadis, G.;
Voisin, V.;
Waegebert, V.;
Wischnewski, R.
Submitted: 2015-08-26
NectarCAM is a camera proposed for the medium-sized telescopes of the
Cherenkov Telescope Array (CTA) covering the central energy range of ~100 GeV
to ~30 TeV. It has a modular design and is based on the NECTAr chip, at the
heart of which is a GHz sampling Switched Capacitor Array and a 12-bit Analog
to Digital converter. The camera will be equipped with 265 7-photomultiplier
modules, covering a field of view of 8 degrees. Each module includes the
photomultiplier bases, high voltage supply, pre-amplifier, trigger, readout and
Ethernet transceiver. The recorded events last between a few nanoseconds and
tens of nanoseconds. The camera trigger will be flexible so as to minimize the
read-out dead-time of the NECTAr chips. NectarCAM is designed to sustain a data
rate of more than 4 kHz with less than 5\% dead time. The camera concept, the
design and tests of the various subcomponents and results of thermal and
electrical prototypes are presented. The design includes the mechanical
structure, cooling of the electronics, read-out, clock distribution, slow
control, data-acquisition, triggering, monitoring and services.