We confirm the planetary nature of TOI-1728b using a combination of ground-based photometry, near-infrared Doppler velocimetry and spectroscopy with the Habitable-zone Planet Finder.TOI-1728 is an old, inactive M0 star with \teff{} $= 3980^{+31}_{-32}$ K, which hosts a transiting super Neptune at an orbital period of $\sim$ 3.49 days. Joint fitting of the radial velocities and TESS and ground-based transits yields a planetary radius of $5.05_{-0.17}^{+0.16}$ R$_{\oplus}$, mass $26.78_{-5.13}^{+5.43}$ M$_{\oplus}$ and eccentricity $0.057_{-0.039}^{+0.054}$. We estimate the stellar properties, and perform a search for He 10830 \AA absorption during the transit of this planet and claim a null detection with an upper limit of 1.1$\%$ with 90\% confidence. A deeper level of He 10830 \AA ~ absorption has been detected in the planet atmosphere of GJ 3470b, a comparable gaseous planet. TOI-1728b is the largest super Neptune -- the intermediate subclass of planets between Neptune and the more massive gas-giant planets -- discovered around an M dwarf. With its relatively large mass and radius, TOI-1728 represents a valuable datapoint in the M-dwarf exoplanet mass-radius diagram, bridging the gap between the lighter Neptune-sized planets and the heavier Jovian planets known to orbit M-dwarfs. With a low bulk density of $1.14_{-0.24}^{+0.26}$ g/cm$^3$, and orbiting a bright host star (J $\sim 9.6$, V $\sim 12.4$), TOI-1728b is also a promising candidate for transmission spectroscopy both from the ground and from space, which can be used to constrain planet formation and evolutionary models.

We report on the validation of two planets orbiting the nearby (36pc) M2 dwarf TOI-1266 observed by the TESS mission. The inner planet is sub-Neptune-sized ($R=2.46 \pm 0.08 R_\oplus$) with an orbital period of 10.9 days. The outer planet has a radius of $1.67_{-0.11}^{+0.09} R_\oplus$ and resides in the exoplanet Radius Valley---the transition region between rocky and gaseous planets. With an orbital period of 18.8 days, the outer planet receives an insolation flux of 2.4 times that of Earth, similar to the insolation of Venus. Using precision near-infrared radial velocities with the Habitable-zone Planet Finder Spectrograph, we place upper mass limits of $15.9 M_\oplus$ and $6.4 M_\oplus$ at 95% confidence for the inner and outer planet, respectively. A more precise mass constraint of planet c, achievable with current RV instruments given the host star brightness (V=12.9, J=9.7), will yield further insights into the dominant processes sculpting the exoplanet Radius Valley.

Young, rapidly-rotating M dwarfs exhibit prominent starspots, which create quasiperiodic signals in their photometric and Doppler spectroscopic measurements. The periodic Doppler signals can mimic radial velocity (RV) changes expected from orbiting exoplanets. Exoplanets can be distinguished from activity-induced false positives by the chromaticity and long-term incoherence of starspot signals, but these qualities are poorly constrained for fully-convective M stars. Coherent photometric starspot signals on M dwarfs may persist for hundreds of rotations, and the wavelength dependence of starspot RV signals may not be consistent between stars due to differences in their magnetic fields and active regions. We obtained precise multi-wavelength RVs of four rapidly-rotating M dwarfs (AD Leo, G 227-22, GJ 1245B, GJ 3959) using the near-infrared (NIR) Habitable-zone Planet Finder, and the optical Keck/HIRES spectrometer. Our RVs are complemented by photometry from Kepler, TESS, and the Las Cumbres Observatory (LCO) network of telescopes. We found that all four stars exhibit large spot-induced Doppler signals at their rotation periods, and investigated the longevity and optical-to-NIR chromaticity for these signals. The phase curves remain coherent much longer than is typical for Sunlike stars. Their chromaticity varies, and one star (GJ 3959) exhibits optical and NIR RV modulation consistent in both phase and amplitude. In general, though, we find that the NIR amplitudes are lower than their optical counterparts. We conclude that starspot modulation for rapidly-rotating M stars frequently remains coherent for hundreds of stellar rotations, and gives rise to Doppler signals that, due to this coherence, may be mistaken for exoplanets.

Understanding the dynamics and kinematics of out-flowing atmospheres of hot and warm exoplanets is crucial to understanding the origins and evolutionary history of the exoplanets near the evaporation desert. Recently, ground based measurements of the meta-stable Helium atom's resonant absorption at 10830 \AA~has become a powerful probe of the base environment which is driving the outflow of exoplanet atmospheres. We report evidence for the He I 10830 \AA~in absorption (equivalent width $\sim$ $0.012 \pm 0.002$ \AA) in the exosphere of a warm Neptune orbiting the M-dwarf GJ 3470, during three transits using the Habitable Zone Planet Finder (HPF) near infrared spectrograph. This marks the first reported evidence for He I 10830 \AA\, atmospheric absorption for a planet orbiting an M-dwarf. Our detected absorption is broad and its blueshifted wing extends to -36 km/sec, the largest reported in the literature to date. We modelled the state of Helium atoms in the exosphere of GJ3470b based on assumptions on the UV and X-ray flux of GJ 3470, and found our measurement of flux-weighted column density of meta-stable state Helium $(N_{He^2_3S} = 2.4 \times 10^{10} \mathrm{cm^{-2}})$, derived from our transit observations, to be consistent with model, within its uncertainties. The methodology developed here will be useful to study and constrain the atmospheric outflow models of other exoplanets like GJ 3470b which are near the edge of the evaporation desert.

We validate the discovery of a 2 Earth radii sub-Neptune-size planet around the nearby high proper motion M2.5-dwarf G 9-40 (EPIC 212048748), using high-precision near-infrared (NIR) radial velocity (RV) observations with the Habitable-zone Planet Finder (HPF), precision diffuser-assisted ground-based photometry with a custom narrow-band photometric filter, and adaptive optics imaging. At a distance of $d=27.9\mathrm{pc}$, G 9-40b is the second closest transiting planet discovered by K2 to date. The planet's large transit depth ($\sim$3500ppm), combined with the proximity and brightness of the host star at NIR wavelengths (J=10, K=9.2) makes G 9-40b one of the most favorable sub-Neptune-sized planet orbiting an M-dwarf for transmission spectroscopy with JWST, ARIEL, and the upcoming Extremely Large Telescopes. The star is relatively inactive with a rotation period of $\sim$29 days determined from the K2 photometry. To estimate spectroscopic stellar parameters, we describe our implementation of an empirical spectral matching algorithm using the high-resolution NIR HPF spectra. Using this algorithm, we obtain an effective temperature of $T_{\mathrm{eff}}=3404\pm73$K, and metallicity of $\mathrm{[Fe/H]}=-0.08\pm0.13$. Our RVs, when coupled with the orbital parameters derived from the transit photometry, exclude planet masses above $11.7 M_\oplus$ with 99.7% confidence assuming a circular orbit. From its radius, we predict a mass of $M=5.0^{+3.8}_{-1.9} M_\oplus$ and an RV semi-amplitude of $K=4.1^{+3.1}_{-1.6}\mathrm{m\:s^{-1}}$, making its mass measurable with current RV facilities. We urge further RV follow-up observations to precisely measure its mass, to enable precise transmission spectroscopic measurements in the future.

Teledyne's H2RG detector images suffer from cross-hatch like patterns which arises from sub-pixel quantum efficiency (QE) variation. In this paper we present our measurements of this sub-pixel QE variation in the Habitable-Zone Planet Finder's H2RG detector. We present a simple model to estimate the impact of sub-pixel QE variations on the radial velocity, and how a first order correction can be implemented to correct for the artifact in the spectrum. We also present how the HPF's future upgraded laser frequency comb will enable us to implement this correction.

Two key areas of emphasis in contemporary experimental exoplanet science are the detailed characterization of transiting terrestrial planets, and the search for Earth analog planets to be targeted by future imaging missions. Both of these pursuits are dependent on an order-of-magnitude improvement in the measurement of stellar radial velocities (RV), setting a requirement on single-measurement instrumental uncertainty of order 10 cm/s. Achieving such extraordinary precision on a high-resolution spectrometer requires thermo-mechanically stabilizing the instrument to unprecedented levels. Here, we describe the Environment Control System (ECS) of the NEID Spectrometer, which will be commissioned on the 3.5 m WIYN Telescope at Kitt Peak National Observatory in 2019, and has a performance specification of on-sky RV precision < 50 cm/s. Because NEID's optical table and mounts are made from aluminum, which has a high coefficient of thermal expansion, sub-milliKelvin temperature control is especially critical. NEID inherits its ECS from that of the Habitable-zone Planet Finder (HPF), but with modifications for improved performance and operation near room temperature. Our full-system stability test shows the NEID system exceeds the already impressive performance of HPF, maintaining vacuum pressures below $10^{-6}$ Torr and an RMS temperature stability better than 0.4 mK over 30 days. Our ECS design is fully open-source; the design of our temperature-controlled vacuum chamber has already been made public, and here we release the electrical schematics for our custom Temperature Monitoring and Control (TMC) system.

The discovery and characterization of exoplanets around nearby stars is driven by profound scientific questions about the uniqueness of Earth and our Solar System, and the conditions under which life could exist elsewhere in our Galaxy. Doppler spectroscopy, or the radial velocity (RV) technique, has been used extensively to identify hundreds of exoplanets, but with notable challenges in detecting terrestrial mass planets orbiting within habitable zones. We describe infrared RV spectroscopy at the 10 m Hobby-Eberly telescope that leverages a 30 GHz electro-optic laser frequency comb with nanophotonic supercontinuum to calibrate the Habitable Zone Planet Finder spectrograph. Demonstrated instrument precision <10 cm/s and stellar RVs approaching 1 m/s open the path to discovery and confirmation of habitable zone planets around M-dwarfs, the most ubiquitous type of stars in our Galaxy.

The Habitable-zone Planet Finder (HPF) is a highly stabilized fiber fed precision radial velocity (RV) spectrograph working in the Near Infrared (NIR): 810 - 1280 nm . In this paper we present an overview of the preparation of the optical fibers for HPF. The entire fiber train from the telescope focus down to the cryostat is detailed. We also discuss the fiber polishing, splicing and its integration into the instrument using a fused silica puck. HPF was designed to be able to operate in two modes, High Resolution (HR- the only mode mode currently commissioned) and High Efficiency (HE). We discuss these fiber heads and the procedure we adopted to attach the slit on to the HR fibers.

Insufficient instrument thermo-mechanical stability is one of the many roadblocks for achieving 10cm/s Doppler radial velocity (RV) precision, the precision needed to detect Earth-twins orbiting Solar-type stars. Highly temperature and pressure stabilized spectrographs allow us to better calibrate out instrumental drifts, thereby helping in distinguishing instrumental noise from astrophysical stellar signals. We present the design and performance of the Environmental Control System (ECS) for the Habitable-zone Planet Finder (HPF), a high-resolution (R=50,000) fiber-fed near infrared (NIR) spectrograph for the 10m Hobby Eberly Telescope at McDonald Observatory. HPF will operate at 180K, driven by the choice of an H2RG NIR detector array with a 1.7micron cutoff. This ECS has demonstrated 0.6mK RMS stability over 15 days at both 180K and 300K, and maintained high quality vacuum (<$10^{-7}$Torr) over months, during long-term stability tests conducted without a planned passive thermal enclosure surrounding the vacuum chamber. This control scheme is versatile and can be applied as a blueprint to stabilize future NIR and optical high precision Doppler instruments over a wide temperature range from ~77K to elevated room temperatures. A similar ECS is being implemented to stabilize NEID, the NASA/NSF NN-EXPLORE spectrograph for the 3.5m WIYN telescope at Kitt Peak, operating at 300K. A full SolidWorks 3D-CAD model and a comprehensive parts list of the HPF ECS are included with this manuscript to facilitate the adaptation of this versatile environmental control scheme in the broader astronomical community.

A new generation of dedicated Doppler spectrographs will attempt to detect low-mass exoplanets around mid-late M stars at near infrared (NIR) wavelengths, where those stars are brightest and have the most Doppler information content. A central requirement for the success of these instruments is to properly measure the component of radial velocity (RV) variability contributed by stellar magnetic activity and to account for it in exoplanet models of RV data. The wavelength coverage for many of these new instruments will not include the Ca II H&K or H-alpha lines, the most frequently used absorption-line tracers of magnetic activity. Thus, it is necessary to define and characterize NIR activity indicators for mid-late M stars in order to provide simultaneous activity metrics for NIR RV data. We have used the high-cadence UVES observations of the M5.5 dwarf Proxima Centauri from Fuhrmeister et al. (2011) to compare the activity sensitivity of 8 NIR atomic lines to that of H-alpha. We find that equivalent width-type measurements of the NIR K I doublet and the Ca II NIR triplet are excellent proxies for the canonical optical tracers. The Ca II triplet will be acquired by most of the new and upcoming NIR Doppler spectrographs, offering a common, reliable indicator of activity.

We describe a detailed radial velocity error budget for the NASA-NSF Extreme Precision Doppler Spectrometer instrument concept NEID (NN-explore Exoplanet Investigations with Doppler spectroscopy). Such an instrument performance budget is a necessity for both identifying the variety of noise sources currently limiting Doppler measurements, and estimating the achievable performance of next generation exoplanet hunting Doppler spectrometers. For these instruments, no single source of instrumental error is expected to set the overall measurement floor. Rather, the overall instrumental measurement precision is set by the contribution of many individual error sources. We use a combination of numerical simulations, educated estimates based on published materials, extrapolations of physical models, results from laboratory measurements of spectroscopic subsystems, and informed upper limits for a variety of error sources to identify likely sources of systematic error and construct our global instrument performance error budget. While natively focused on the performance of the NEID instrument, this modular performance budget is immediately adaptable to a number of current and future instruments. Such an approach is an important step in charting a path towards improving Doppler measurement precisions to the levels necessary for discovering Earth-like planets.

An earlier study of the Kepler Mission noise properties on time scales of primary relevance to detection of exoplanet transits found that higher than expected noise followed to a large extent from the stars, rather than instrument or data analysis performance. The earlier study over the first six quarters of Kepler data is extended to the full four years ultimately comprising the mission. Efforts to improve the pipeline data analysis have been successful in reducing noise levels modestly as evidenced by smaller values derived from the current data products. The new analyses of noise properties on transit time scales show significant changes in the component attributed to instrument and data analysis, with essentially no change in the inferred stellar noise. We also extend the analyses to time scales of several days, instead of several hours to better sample stellar noise that follows from magnetic activity. On the longer time scale there is a shift in stellar noise for solar-type stars to smaller values in comparison to solar values.

We present the design and test results of a compact optical fiber double-scrambler for high-resolution Doppler radial velocity instruments. This device consists of a single optic: a high-index $n$$\sim$2 ball lens that exchanges the near and far fields between two fibers. When used in conjunction with octagonal fibers, this device yields very high scrambling gains and greatly desensitizes the fiber output from any input illumination variations, thereby stabilizing the instrument profile of the spectrograph and improving the Doppler measurement precision. The system is also highly insensitive to input pupil variations, isolating the spectrograph from telescope illumination variations and seeing changes. By selecting the appropriate glass and lens diameter the highest efficiency is achieved when the fibers are practically in contact with the lens surface, greatly simplifying the alignment process when compared to classical double-scrambler systems. This prototype double-scrambler has demonstrated significant performance gains over previous systems, achieving scrambling gains in excess of 10,000 with a throughput of $\sim$87% using uncoated Polymicro octagonal fibers. Adding a circular fiber to the fiber train further increases the scrambling gain to $>$20,000, limited by laboratory measurement error. While this fiber system is designed for the Habitable-zone Planet Finder spectrograph, it is more generally applicable to other instruments in the visible and near-infrared. Given the simplicity and low cost, this fiber scrambler could also easily be multiplexed for large multi-object instruments.

Using solar spectral irradiance measurements from the SORCE spacecraft and the F/F' technique, we have estimated the radial velocity (RV) scatter induced on the Sun by stellar activity as a function of wavelength. Our goal was to evaluate the potential advantages of using new near-infrared (NIR) spectrographs to search for low-mass planets around bright F, G, and K stars by beating down activity effects. Unlike M dwarfs, which have higher fluxes and therefore greater RV information content in the NIR, solar-type stars are brightest at visible wavelengths, and, based solely on information content, are better suited to traditional optical RV surveys. However, we find that the F/F' estimated RV noise induced by stellar activity is diminished by up to a factor of 4 in the NIR versus the visible. Observations with the upcoming future generation of NIR instruments can be a valuable addition to the search for low-mass planets around bright FGK stars in reducing the amount of stellar noise affecting RV measurements.

We present the design concept of the wavelength calibration system for the Habitable-zone Planet Finder instrument (HPF), a precision radial velocity (RV) spectrograph designed to detect terrestrial-mass planets around M-dwarfs. HPF is a stabilized, fiber-fed, R$\sim$50,000 spectrograph operating in the near-infrared (NIR) z/Y/J bands from 0.84 to 1.3 microns. For HPF to achieve 1 m s$^{-1}$ or better measurement precision, a unique calibration system, stable to several times better precision, will be needed to accurately remove instrumental effects at an unprecedented level in the NIR. The primary wavelength calibration source is a laser frequency comb (LFC), currently in development at NIST Boulder, discussed separately in these proceedings. The LFC will be supplemented by a stabilized single-mode fiber Fabry-Perot interferometer reference source and Uranium-Neon lamp. The HPF calibration system will combine several other new technologies developed by the Penn State Optical-Infrared instrumentation group to improve RV measurement precision including a dynamic optical coupling system that significantly reduces modal noise effects. Each component has been thoroughly tested in the laboratory and has demonstrated significant performance gains over previous NIR calibration systems.

We discuss the ongoing development of single-mode fiber Fabry-Perot (FFP) Interferometers as precise astro-photonic calibration sources for high precision radial velocity (RV) spectrographs. FFPs are simple, inexpensive, monolithic units that can yield a stable and repeatable output spectrum. An FFP is a unique alternative to a traditional etalon, as the interferometric cavity is made of single-mode fiber rather than an air-gap spacer. This design allows for excellent collimation, high spectral finesse, rigid mechanical stability, insensitivity to vibrations, and no need for vacuum operation. The device we have tested is a commercially available product from Micron Optics. Our development path is targeted towards a calibration source for the Habitable-Zone Planet Finder (HPF), a near-infrared spectrograph designed to detect terrestrial-mass planets around low-mass stars, but this reference could also be used in many existing and planned fiber-fed spectrographs as we illustrate using the Apache Point Observatory Galactic Evolution Experiment (APOGEE) instrument. With precise temperature control of the fiber etalon, we achieve a thermal stability of 100 $\mu$K and associated velocity uncertainty of 22 cm s$^{-1}$. We achieve a precision of $\approx$2 m s$^{-1}$ in a single APOGEE fiber over 12 hours using this new photonic reference after removal of systematic correlations. This high precision (close to the expected photon-limited floor) is a testament to both the excellent intrinsic wavelength stability of the fiber interferometer and the stability of the APOGEE instrument design. Overall instrument velocity precision is 80 cm s$^{-1}$ over 12 hours when averaged over all 300 APOGEE fibers and after removal of known trends and pressure correlations, implying the fiber etalon is intrinsically stable to significantly higher precision.

Modal noise in optical fibers imposes limits on the signal to noise and velocity precision achievable with the next generation of astronomical spectrographs. This is an increasingly pressing problem for precision radial velocity (RV) spectrographs in the near-infrared (NIR) and optical that require both high stability of the observed line profiles and high signal to noise. Many of these spectrographs plan to use highly coherent emission line calibration sources like laser frequency combs and Fabry-Perot etalons to achieve precision sufficient to detect terrestrial mass planets. These high precision calibration sources often use single mode fibers or highly coherent sources. Coupling light from single mode fibers to multi-mode fibers leads to only a very low number of modes being excited, thereby exacerbating the modal noise measured by the spectrograph. We present a commercial off-the-shelf (COTS) solution that significantly mitigates modal noise at all optical and NIR wavelengths, and which can be applied to spectrograph calibration systems. Our solution uses an integrating sphere in conjunction with a diffuser that is moved rapidly using electrostrictive polymers, and is generally superior to most tested forms of mechanical fiber agitation. We demonstrate a high level of modal noise reduction with a narrow bandwidth 1550 nm laser. Our relatively inexpensive solution immediately enables spectrographs to take advantage of the innate precision of bright state-of-the art calibration sources by removing a major source of systematic noise.

The CM Draconis system comprises two eclipsing mid-M dwarfs of nearly equal mass in a 1.27-day orbit. This well-studied eclipsing binary has often been used for benchmark tests of stellar models, since its components are amongst the lowest mass stars with well-measured masses and radii (~ 1% relative precision). However, as with many other low-mass stars, non-magnetic models have been unable to match the observed radii and effective temperatures for CM Dra at the 5-10% level. To date, the uncertain metallicity of the system has complicated comparison of theoretical isochrones with observations. In this Letter, we use data from the SpeX instrument on the NASA Infrared Telescope Facility (IRTF) to measure the metallicity of the system during primary and secondary eclipses, as well as out of eclipse, based on an empirical metallicity calibration in the H and K near-infrared (NIR) bands. We derive a [Fe/H] = -0.30 +- 0.12 that is consistent across all orbital phases. The determination of [Fe/H] for this system constrains a key dimension of parameter space when attempting to reconcile model isochrone predictions and observations.

Radial velocity (RV) surveys supported by high precision wavelength references (notably ThAr lamps and I2 cells) have successfully identified hundreds of exoplanets; however, as the search for exoplanets moves to cooler, lower mass stars, the optimum wave band for observation for these objects moves into the near infrared (NIR) and new wavelength standards are required. To address this need we are following up our successful deployment of an H band(1.45-1.7{\mu}m) laser frequency comb based wavelength reference with a comb working in the Y and J bands (0.98-1.3{\mu}m). This comb will be optimized for use with a 50,000 resolution NIR spectrograph such as the Penn State Habitable Zone Planet Finder. We present design and performance details of the current Y+J band comb.

Modal noise in fibers has been shown to limit the signal-to-noise ratio achievable in fiber-coupled, high-resolution spectrographs if it is not mitigated via modal scrambling techniques. Modal noise become significantly more important as the wavelength increases and presents a risk to the new generation of near-infrared precision radial spectrographs under construction or being proposed to search for planets around cool M-dwarf stars, which emit most of their light in the NIR. We present experimental results of tests at Penn State University characterizing modal noise in the far visible out to 1.5 microns and the degree of modal scrambling we obtained using mechanical scramblers. These efforts are part of a risk mitigation effort for the Habitable Zone Planet Finder spectrograph currently under development at Penn State University.

We present the ongoing development of a commercially available Micron Optics fiber-Fabry Perot Interferometer as a precise, stable, easy to use, and economic spectrograph reference with the goal of achieving <1 m/s long term stability. Fiber Fabry-Perot interferometers (FFP) create interference patterns by combining light traversing different delay paths. The interference creates a rich spectrum of narrow emission lines, ideal for use as a precise Doppler reference. This fully photonic reference could easily be installed in existing NIR spectrographs, turning high resolution fiber-fed spectrographs into precise Doppler velocimeters. First light results on the Sloan Digital Sky Survey III (SDSS-III) Apache Point Observatory Galactic Evolution Experiment (APOGEE) spectrograph and several tests of major support instruments are also presented. These instruments include a SuperK Photonics fiber supercontinuum laser source and precise temperature controller. A high resolution spectrum obtained using the NIST 2-m Fourier transform spectrometer (FTS) is also presented. We find our current temperature control precision of the FFP to be 0.15 mK, corresponding to a theoretical velocity stability of 35 cm/s due to temperature variations of the interferometer cavity.

We present the scientific motivation and conceptual design for the recently funded Habitable-zone Planet Finder (HPF), a stabilized fiber-fed near-infrared (NIR) spectrograph for the 10 meter class Hobby-Eberly Telescope (HET) that will be capable of discovering low mass planets around M dwarfs. The HPF will cover the NIR Y & J bands to enable precise radial velocities to be obtained on mid M dwarfs, and enable the detection of low mass planets around these stars. The conceptual design is comprised of a cryostat cooled to 200K, a dual fiber-feed with a science and calibration fiber, a gold coated mosaic echelle grating, and a Teledyne Hawaii-2RG (H2RG) NIR detector with a 1.7$\mu$m cutoff. A uranium-neon hollow-cathode lamp is the baseline wavelength calibration source, and we are actively testing laser frequency combs to enable even higher radial velocity precision. We will present the overall instrument system design and integration with the HET, and discuss major system challenges, key choices, and ongoing research and development projects to mitigate risk. We also discuss the ongoing process of target selection for the HPF survey.

We have used high-resolution spectroscopy to observe the Kepler-16 eclipsing binary as a double-lined system, and measure precise radial velocities for both stellar components. These velocities yield a dynamical mass-ratio of q=0.2994+-0.0031. When combined with the inclination, i=90.3401+0.0016-0.0019 deg, measured from the Kepler photometric data by Doyle et al. 2011, we derive dynamical masses for the Kepler-16 components of M_A=0.654+-0.017 M_sun and M_B=0.1959+-0.0031 M_sun, a precision of 2.5% and 1.5% respectively. Our results confirm at the ~2% level the mass-ratio derived by Doyle et al. with their photometric-dynamical model, q=0.2937+-0.0006. These are among the most precise spectroscopic dynamical masses ever measured for low-mass stars, and provide an important direct test of the results from the photometric-dynamical modeling technique.

We describe and characterize a 25 GHz laser frequency comb based on a cavity-filtered erbium fiber mode-locked laser. The comb provides a uniform array of optical frequencies spanning 1450 nm to 1700 nm, and is stabilized by use of a global positioning system referenced atomic clock. This comb was deployed at the 9.2 m Hobby-Eberly telescope at the McDonald Observatory where it was used as a radial velocity calibration source for the fiber-fed Pathfinder near-infrared spectrograph. Stellar targets were observed in three echelle orders over four nights, and radial velocity precision of \sim10 m/s (\sim6 MHz) was achieved from the comb-calibrated spectra.

We present an empirical near-infrared (NIR) spectroscopic method for estimating M dwarf metallicities, based on features in the H-band, as well as an implementation of a similar published method in the K-band. We obtained R~2000 NIR spectra of a sample of M dwarfs using the NASA IRTF-SpeX spectrograph, including 22 M dwarf metallicity calibration targets that have FGK companions with known metallicities. The H-band and K-band calibrations provide equivalent fits to the metallicities of these binaries, with an accuracy of +/- 0.12 dex. We derive the first empirically calibrated spectroscopic metallicity estimate for the giant planet-hosting M dwarf GJ 317, confirming its super-solar metallicity. Combining this result with observations of eight other M dwarf planet hosts, we find that M dwarfs with giant planets are preferentially metal-rich compared to those that host less massive planets. Our H-band calibration relies on strongly metallicity-dependent features in the H-band, which will be useful in compositional studies using mid to high resolution NIR M dwarf spectra, such as those produced by multiplexed surveys like SDSS-III APOGEE. These results will also be immediately useful for ongoing spectroscopic surveys of M dwarfs.

We present a high-resolution (R ~ 50 000) atlas of a uranium-neon (U/Ne) hollow-cathode spectrum in the H-band (1454 nm to 1638 nm) for the calibration of near-infrared spectrographs. We obtained this U/Ne spectrum simultaneously with a laser-frequency comb spectrum, which we used to provide a first-order calibration to the U/Ne spectrum. We then calibrated the U/Ne spectrum using the recently-published uranium line list of Redman et al. (2011), which is derived from high-resolution Fourier transform spectrometer measurements. These two independent calibrations allowed us to easily identify emission lines in the hollow cathode lamp that do not correspond to known (classified) lines of either uranium or neon, and to compare the achievable precision of each source. Our frequency comb precision was limited by modal noise and detector effects, while the U/Ne precision was limited primarily by the signal-to-noise ratio (S/N) of the observed emission lines and our ability to model blended lines. The standard deviation in the dispersion solution residuals from the S/N-limited U/Ne hollow cathode lamp were 50% larger than the standard deviation of the dispersion solution residuals from the modal-noise-limited laser frequency comb. We advocate the use of U/Ne lamps for precision calibration of near-infrared spectrographs, and this H-band atlas makes these lamps significantly easier to use for wavelength calibration.

We provide new measurements of wavenumbers and line identifications of 10 100 UI and UII near-infrared (NIR) emission lines between 2500 cm-1 and 12 000 cm-1 (4000 nm to 850 nm) using archival FTS spectra from the National Solar Observatory (NSO). This line list includes isolated uranium lines in the Y, J, H, K, and L bands (0.9 {\mu}m to 1.1 {\mu}m, 1.2 {\mu}m to 1.35 {\mu}m, 1.5 {\mu}m to 1.65 {\mu}m, 2.0 {\mu}m to 2.4 {\mu}m, and 3.0 {\mu}m to 4.0 {\mu}m, respectively), and provides six times as many calibration lines as thorium in the NIR spectral range. The line lists we provide enable inexpensive, commercially-available uranium hollow-cathode lamps to be used for high-precision wavelength calibration of existing and future high-resolution NIR spectrographs.

The Penn State Pathfinder is a prototype warm fiber-fed Echelle spectrograph with a Hawaii-1 NIR detector that has already demonstrated 7-10 m/s radial velocity precision on integrated sunlight. The Pathfinder testbed was initially setup for the Gemini PRVS design study to enable a systematic exploration of the challenges of achieving high radial velocity precision in the near-infrared, as well as to test possible solutions to these calibration challenges. The current version of the Pathfinder has an R3 echelle grating, and delivers a resolution of R~50,000 in the Y, J or H bands of the spectrum. We will discuss the on sky-performance of the Pathfinder during an engineering test run at the Hobby Eberly Telescope as well the results of velocity observations of M dwarfs. We will also discuss the unique calibration techniques we have explored, like Uranium-Neon hollow cathode lamps, notch filter, and modal noise mitigation to enable high precision radial velocity observation in the NIR. The Pathfinder is a prototype testbed precursor of a cooled high-resolution NIR spectrograph capable of high radial velocity precision and of finding low mass planets around mid-late M dwarfs.

The Habitable Zone Planet Finder (HZPF) is a proposed instrument for the 10m class Hobby Eberly telescope that will be capable of discovering low mass planets around M dwarfs. HZPF will be fiber-fed, provide a spectral resolution R~ 50,000 and cover the wavelength range 0.9-1.65{\mu}m, the Y, J and H NIR bands where most of the flux is emitted by mid-late type M stars, and where most of the radial velocity information is concentrated. Enclosed in a chilled vacuum vessel with active temperature control, fiber scrambling and mechanical agitation, HZPF is designed to achieve a radial velocity precision < 3m/s, with a desire to obtain <1m/s for the brightest targets. This instrument will enable a study of the properties of low mass planets around M dwarfs; discover planets in the habitable zones around these stars, as well serve as an essential radial velocity confirmation tool for astrometric and transit detections around late M dwarfs. Radial velocity observation in the near-infrared (NIR) will also enable a search for close in planets around young active stars, complementing the search space enabled by upcoming high-contrast imaging instruments like GPI, SPHERE and PALM3K. Tests with a prototype Pathfinder instrument have already demonstrated the ability to recover radial velocities at 7-10 m/s precision from integrated sunlight and ~15-20 m/s precision on stellar observations at the HET. These tests have also demonstrated the ability to work in the NIR Y and J bands with an un-cooled instrument. We will also discuss lessons learned about calibration and performance from our tests and how they impact the overall design of the HZPF.

We present spectroscopic rotation velocities (v sin i) for 56 M dwarf stars using high resolution HET HRS red spectroscopy. In addition we have also determined photometric effective temperatures, masses and metallicities ([Fe/H]) for some stars observed here and in the literature where we could acquire accurate parallax measurements and relevant photometry. We have increased the number of known v sin is for mid M stars by around 80% and can confirm a weakly increasing rotation velocity with decreasing effective temperature. Our sample of v sin is peak at low velocities (~3 km/s). We find a change in the rotational velocity distribution between early M and late M stars, which is likely due to the changing field topology between partially and fully convective stars. There is also a possible further change in the rotational distribution towards the late M dwarfs where dust begins to play a role in the stellar atmospheres. We also link v sin i to age and show how it can be used to provide mid-M star age limits. When all literature velocities for M dwarfs are added to our sample there are 198 with v sin i less than or equal to 10 km/s and 124 in the mid-to-late M star regime (M3.0-M9.5) where measuring precision optical radial-velocities is difficult. In addition we also search the spectra for any significant Halpha emission or absorption. 43% were found to exhibit such emission and could represent young, active objects with high levels of radial-velocity noise. The tables presented here will aid any future M star planet search target selection to extract stars that will exhibit low radial-velocity jitter.

We have designed and tested an in-plane echelle spectrograph configured to investigate precision radial velocities from ground-based near-infrared observations. The spectrograph operates across the spectral range of 0.9-1.7 mm at a spectral resolution of R = 50,000, and uses a liquid nitrogen-cooled HAWAII 1K detector. Repeated measurements of the Earth's rotation via integrated Sunlight with two different instrument arrangements in the near infrared Y band have produced radial velocities with ~10 m/s RMS over a period of several hours. The most recent instrument configuration has achieved an unbinned RMS of 7 m/s and suggests that infrared radial velocity precisions may be able to approach those achieved at optical wavelengths.

We report the discovery of a substellar-mass companion to the K0-giant HD 17092 with the Hobby-Eberly Telescope. In the absence of any correlation of the observed 360-day periodicity with the standard indicators of stellar activity, the observed radial velocity variations are most plausibly explained in terms of a Keplerian motion of a planetary-mass body around the star. With the estimated stellar mass of 2.3Msun, the minimum mass of the planet is 4.6MJ. The planet's orbit is characterized by a mild eccentricity of e=0.17 and a semi-major axis of 1.3 AU. This is the tenth published detection of a planetary companion around a red giant star. Such discoveries add to our understanding of planet formation around intermediate-mass stars and they provide dynamical information on the evolution of planetary systems around post-main sequence stars.

We report the detection of the first extrasolar planet, ET-1 (HD 102195b), using the Exoplanet Tracker (ET), a new generation Doppler instrument. The planet orbits HD 102195, a young star with solar metallicity that may be part of the local association. The planet imparts radial velocity variability to the star with a semiamplitude of $63.4\pm2.0$ m s$^{-1}$ and a period of 4.11 days. The planetary minimum mass ($m \sin i$) is $0.488\pm0.015$ $M_J$.

We describe the design and construction of a formatted fiber field-unit, SparsePak, and characterize its optical and astrometric performance. This array is optimized for spectroscopy of low-surface brightness, extended sources in the visible and near-infrared. SparsePak contains 82, 4.7" fibers subtending an area of 72"x71" in the telescope focal plane, and feeds the WIYN Bench spectrograph. Together, these instruments are capable of achieving spectral resolutions of lambda/dlambda ~ 20000 and an area--solid-angle product of ~140 arcsec^2 m^2 per fiber. Laboratory measurements of SparsePak lead to several important conclusions on the design of fiber termination and cable curvature to minimize focal ratio degradation. SparsePak itself has throughput >80% redwards of 5200 A, and 90-92% in the red. Fed at f/6.3, the cable delivers an output 90% encircled energy at nearly f/5.2. This has implications for performance gains if the WIYN Bench Spectrograph had a faster collimator. Our approach to integral-field spectroscopy yields an instrument which is simple and inexpensive to build, yet yields the highest area--solid-angle product per spectrum of any system in existence. An Appendix details the fabrication process in sufficient detail for others to repeat. SparsePak was funded by the National Science Foundation and the University of Wisconsin-Madison Graduate School, and is now publicly available on the WIYN Telescope through the National Optical Astronomical Observatories.

High resolution echelle spectra of PW And (HD~1405) have been taken during eight observing runs from 1999 to 2002. The detailed analysis of the spectra allow us to determine its spectral type (K2V), mean heliocentric radial velocity (V_hel = -11.15 km/s) rotational velocity (vsin{i} = 22.6 km/s), and equivalent width of the lithium line 6707.8 AA (EW(LiI) = 273 mAA). The kinematic (Galactic Velocity (U, V, W)) confirms its membership of the Local Association moving group, in agreement with the age (30 to 80 Myrs) inferred from the color magnitude diagram and the lithium equivalent width. Photospheric activity (presence of cool spots that disturb the profiles of the photospheric lines) has been detected as changes in the the bisectors of the cross correlation function (CCF) resulting of cross-correlate the spectra of PW And with the spectrum of a non active star of similar spectral type. These variations of the CCF bisectors are related to the variations in the measured radial velocities and are modulated with a period similar to the photometric period of the star. At the same time, chromospheric activity has been analyzed, using the spectral subtraction technique and simultaneous spectroscopic observations of the H_alpha, H_beta, NaI D_1 and D_2$, HeI D_3, MgI b triplet, CaII H&K, and CaII infrared triplet lines. A flare was observed during the last observing run of 2001, showing an enhancement in the observed chromospheric lines. A less powerful flare was observed on 2002 August 23. The variations of the chromospheric activity indicators seem to be related to the photospheric activity. A correlation between radial velocity, changes in the CCF bisectors and equivalent width of different chromospheric lines is observed with a different behaviour between epochs 1999, 2001 and 2002.

Low dispersion optical spectra have been obtained with the Hobby-Eberly Telescope of 22 very red objects found in early imaging data from the Sloan Digital Sky Survey. The objects are assigned spectral types on the 2MASS system (Kirkpatrick et al. 1999) and are found to range from late M to late L. The red- and near-infrared colors from SDSS and 2MASS correlate closely with each other, and most of the colors are closely related to spectral type in this range; the exception is the (i^* - z^*) color, which appears to be independent of spectral type between about M7 and L4. The spectra suggest that this independence is due to the disappearance of the TiO and VO absorption in the i-band for later spectral types; to the presence of strong Na I and K I absorption in the i-band; and to the gradual disappearance of the 8400 Angstrom absorption of TiO and FeH in the z-band.

We present results from a 221.9 ks Chandra exposure of the HDF-N and its vicinity, concentrating on the 8.6' X 8.7' area covered by the Caltech Faint Field Galaxy Redshift Survey (the `Caltech area'). The minimum detectable fluxes in the 0.5-2 keV and 2-8 keV bands are 1.3e-16 cgs and 6.5e-16 cgs, respectively and a total of 82 sources are detected. More than 80% of the extragalactic X-ray background in the 2-8 keV band is resolved. Redshifts are available for 96% of the sources with R<23; the redshift range is 0.1-3.5 with most sources having z < 1.5. Eight of the X-ray sources are located in the HDF-N itself, including two not previously reported. A population of X-ray faint, optically bright, nearby galaxies emerges at soft-band fluxes of ~< 3e-16 cgs. We set the tightest constraints to date on the X-ray emission properties of microJy radio sources, mid-infrared sources detected by ISO, and very red (R-K_s > 5.0) objects. Where both the infrared and the X-ray coverage are deepest, 75% of the X-ray sources are detected by ISO; the high X-ray to infrared matching rate bodes well for future sensitive infrared observations of faint X-ray sources. Four of the 33 very red objects that have been identified in the Caltech area by Hogg et al. (2000) are detected in X-rays; these four are among our hardest Chandra sources, and we argue that they contain moderately luminous obscured AGN. Overall, however, the small Chandra detection fraction suggests a relatively small AGN content in the optically selected very red object population. (Abridged)

We report the discovery of 27 quasars with redshifts between 3.58 and 4.49. The objects were identified as high-redshift candidates based on their colors in Sloan Digital Sky Survey commissioning data. The redshifts were confirmed with low resolution spectra obtained at the Hobby-Eberly Telescope. The quasars' $i^*$ magnitudes range from 18.55 to 20.97. Nearly 60% of the quasar candidates observed are confirmed spectroscopically as quasars. Two of the objects are Broad Absorption Line quasars, and several other quasars appear to have narrow associated absorption features.

We present results from a study of 2-8 keV X-ray sources detected by the Advanced CCD Imaging Spectrometer (ACIS) instrument on the Chandra X-ray Observatory in the field of the z=0.516 cluster CRSS J0030.5+2618. In our 63.5 arcmin^2 search area, we detect 10 sources with 2-8 keV fluxes down to approximately 4x10^{-15} erg cm^{-2} s$^{-1}; our lowest flux sources are approximately 10 times fainter than those previously available for study in this band. Our derived source density is about an order of magnitude larger than previous source counts above 2 keV, although this density may be enhanced somewhat due to the presence of the cluster. We detail our methods for source detection and characterization, and we show that the resulting source list and parameters are robust. We have used the Marcario Low Resolution Spectrograph on the Hobby-Eberly Telescope to obtain optical spectra for several of our sources; combining these spectra with archival data we find that the sources appear to be active galaxies, often with narrow permitted lines, red optical continua or hard X-ray spectra. Four of the X-ray sources are undetected to R=21.7; if they reside in L* galaxies they must have z > 0.55-0.75 and hard X-ray luminosities of L_{2-8} > 4x10^{42} erg s^{-1}. We detect all but one of our 2-8 keV sources in the 0.2-2 keV band as well. This result extends to significantly lower fluxes the constraints on any large, completely new population of X-ray sources that appears above 2-3 keV.

This paper describes spectra of quasar candidates acquired during the commissioning phase of the Low-Resolution Spectrograph of the Hobby-Eberly Telescope. The objects were identified as possible quasars from multicolor image data from the Sloan Digital Sky Survey. The ten sources had typical r' magnitudes of 19-20, except for one extremely red object with r' of approximately 23. The data, obtained with exposure times between 10 and 25 minutes, reveal that the spectra of four candidates are essentially featureless and are not quasars, five are quasars with redshifts between 2.92 and 4.15 (including one Broad Absorption Line quasar), and the red source is a very late M

We present a library of Penn State Fiber Optic Echelle (FOE) observations of a sample of field stars with spectral types F to M and luminosity classes V to I. The spectral coverage is from 3800 AA to 10000 AA with nominal a resolving power 12000. These spectra include many of the spectral lines most widely used as optical and near-infrared indicators of chromospheric activity such as the Balmer lines (H_alpha, H_beta), Ca II H & K, Mg I b triplet, Na I D_{1} and D_{2}, He I D_{3}, and Ca II IRT lines. There are also a large number of photospheric lines, which can also be affected by chromospheric activity, and temperature sensitive photospheric features such as TiO bands. The spectra have been compiled with the goal of providing a set of standards observed at medium resolution. We have extensively used such data for the study of active chromosphere stars by applying a spectral subtraction technique. However, the data set presented here can also be utilized in a wide variety of ways ranging from radial velocity templates to study of variable stars and stellar population synthesis. This library can also be used for spectral classification purposes and determination of atmospheric parameters (T_eff, log{g}, [Fe/H]). A digital version of all the fully reduced spectra is available via ftp and the World Wide Web (WWW) in FITS format.

We report the possible detection of a Li I 6708 AA line enhancement during an unusual long-duration optical flare in the recently discovered, X-ray/EUV selected, chromospherically active binary 2RE J0743+224. The Li I equivalent width (EW) variations follow the temporal evolution of the flare and large changes are observed in the intensity of the line. The maximum Li I enhancement occurs just after the maximum chromospheric emission observed in the flare. A significant increase of the 6Li/7Li isotopic ratio is also detected. No significant simultaneous variations are detected in other photospheric lines. Neither line blends nor starspots seem to be the primary cause of the observed Li I line variation. From all this we suggest that this Li I enhancement is produced by spallation reactions during the flare.

We have started a high resolution optical observation program dedicated to the study of chromospheric activity in weak-lined T Tauri stars (WTTS) recently discovered by the ROSAT All-Sky Survey (RASS). It is our purpose to quantify the phenomenology of the chromospheric activity of each star determining stellar surface fluxes in the more important chromospheric activity indicators (Ca II H & K, H_beta, H_alpha, Ca II IRT) as well as obtain the Li I abundance, a better determination of the stellar parameters, spectral type, and possible binarity. A large number of WTTS have been discovered by the RASS in and around differen star formation clouds.Whether these stars are really WTTS, or post-TTS, or even young main sequence stars is a matter of ongoing debate. However, we have centered our study only on objects for which very recent studies, of Li I abundance (greater than Pleiads of the same spectral type) or radio properties, clearly confirmed their pre-main sequence (PMS) nature. In this contribution we present preliminary results of our January 1998 high resolution echelle spectroscopic observations at the 2.1m telescope of the McDonald Observatory. We have analysed, using the spectral subtraction technique, the H_alpha and Ca II IRT lines of six WTTS (RXJ0312.8-0414NW, SE; RXJ0333.1+1036; RXJ0348.5+0832; RXJ0512.0+1020; RXJ0444.9+2717) located in and around the Taurus-Auriga molecular clouds. A broad and variable double-picked H_alpha emission is observed in RXJ0444.9+2717. Emission above the continuum in H_alpha and Ca II IRT lines is detected in RXJ0333.1+1036 and a filling-in of these lines is present in the rest of the stars. Our spectral type and Li I EW deterninations confirm the PMS nature of these objects.

2RE J0743+224 (BD +23 1799) is a chromospherically active star selected by X-rays and EUV emission detected in the Einstein Slew Survey and ROSAT Wide Field Camara (WFC) all sky survey, and classified as single-lined spectroscopic binary by (Jeffries et al. 1995). We present here high resolution echelle spectroscopic observations of this binary, obtained during a 10 night run 12-21 January 1998 using the 2.1m telescope at McDonald Observatory. These observations reveal it is a double-lined spectroscopic binary. A dramatic increase in the chromospheric emissions (H_alpha and Ca II IRT lines) is detected during the observations. Several arguments favor the interpretation of this behavior as an unusual long-duration flare. First the temporal evolution of the event is similar to the observed in other solar and stellar flares, with an initial impulsive phase characterized by a strong increase in the chromospheric lines (the H_alpha EW change in a factor of 5 in only one day) and thereafter, the line emission decreased gradually over several days. Second, a broad component in the H_alpha line profile is observed just at the beginning of the event. Third, the detection of the He I D_{3} in emission and a filled-in He I 6678 A. We detect a Li I 6708 A line enhancement which is clearly related with the temporal evolution of the flare. The maximum Li I enhancement occurs just after the maximum chromospheric emission observed in the flare. We suggest that this Li I is produced by spallation reactions in the flare. This is the first time that such LiI enhancement associate with a stellar flare is reported, and probably the long-duration of this flare is a key factor for this detection.

We report the detection of a long-duration optical flare in the recenltly discovered, X-ray selected, chromospherically binary 2RE J0743+224. The high resolution echelle spectroscopic observations taken in 12-21th January 1998 exhibit a dramatic increase in the chromospheric emissions (H_alpha and CaII IRT lines) that we interpret as a flare based on: the temporal evolution of the event, the broad component observed in the H_alpha line profile, the detection of the HeI D_3 in emission and a filled-in HeI 6678 A. During these obsevations we detect a LiI 6708 A line enhancement which is clearly related with the temporal evolution of the flare. The maximum LiI enhancement occurs just after the maximum chromospheric emission observed in the flare. A significant increase of the 6Li/7Li isotopic ratio is also detected. From all this we suggest that this LiI enhancement is produced by spallation reactions during the flare. This is the first time that such LiI enhancement associate with a stellar flare is reported, and probably the long-duration of this flare is a key factor for this detection. A large fraction of the stellar surface seems to be covered by starspots during the event, as we deduce for the analysis of the TiO 7055 A band. Thus taking into account that LiI line is very temperature sensitive, we can not discard that the LiI variations are related the presence of starspots. However, the correlation with the temporal evolution of the flare, lack of detection of changes in the other photospheric absorption lines, and the large changes observed in the core of the LiI, as predict the models, argue in favour of the hypothesis that the LiI is produced during the flare.