Normalized to: Ramon, P.
[1]
oai:arXiv.org:1508.06555 [pdf] - 1267007
NectarCAM : a camera for the medium size telescopes of the Cherenkov
Telescope Array
Glicenstein, J-F.;
Abril, O.;
Barrio, J-A.;
Blanch~Bigas, O.;
Bolmont, J.;
Bouyjou, F.;
Brun, P.;
Chabanne, E.;
Champion, C.;
Colonges, S.;
Corona, P.;
Delagnes, E.;
Delgado, C.;
Ginzov, C. Diaz;
Durand, D.;
Ernenwein, J-P.;
Fegan, S.;
Ferreira, O.;
Fesquet, M.;
Fiasson, A.;
Fontaine, G.;
Fouque, N.;
Gascon, D.;
Giebels, B.;
Henault, F.;
Hermel, R.;
Hoffmann, D.;
Horan, D.;
Houles, J.;
Jean, P.;
Jocou, L.;
Karkar, S.;
Knoedlseder, J.;
Kossakowski, R.;
Lamanna, G.;
LeFlour, T.;
Lenain, J-P.;
Leveque, A.;
Louis, F.;
Martinez, G.;
Moudden, Y.;
Moulin, E.;
Nayman, P.;
Nunio, F.;
Olive, J-F.;
Panazol, J-L.;
Pavy, S.;
Petrucci, P-O.;
Pierre, E.;
Prast, J.;
Punch, M.;
Ramon, P.;
Rateau, S.;
Ravel, T.;
Rosier-Lees, S.;
Sanuy, A.;
Shayduk, M.;
Sizun, P-Y.;
Sulanke, K-H.;
Tavernet, J-P.;
Tejedor~Alvarez, L-A.;
Toussenel, F.;
Vasileiadis, G.;
Voisin, V.;
Waegebert, V.;
Wischnewski, R.
Submitted: 2015-08-26
NectarCAM is a camera proposed for the medium-sized telescopes of the
Cherenkov Telescope Array (CTA) covering the central energy range of ~100 GeV
to ~30 TeV. It has a modular design and is based on the NECTAr chip, at the
heart of which is a GHz sampling Switched Capacitor Array and a 12-bit Analog
to Digital converter. The camera will be equipped with 265 7-photomultiplier
modules, covering a field of view of 8 degrees. Each module includes the
photomultiplier bases, high voltage supply, pre-amplifier, trigger, readout and
Ethernet transceiver. The recorded events last between a few nanoseconds and
tens of nanoseconds. The camera trigger will be flexible so as to minimize the
read-out dead-time of the NECTAr chips. NectarCAM is designed to sustain a data
rate of more than 4 kHz with less than 5\% dead time. The camera concept, the
design and tests of the various subcomponents and results of thermal and
electrical prototypes are presented. The design includes the mechanical
structure, cooling of the electronics, read-out, clock distribution, slow
control, data-acquisition, triggering, monitoring and services.
[2]
oai:arXiv.org:1408.6526 [pdf] - 864022
The Large Observatory For x-ray Timing
Feroci, M.;
Herder, J. W. den;
Bozzo, E.;
Barret, D.;
Brandt, S.;
Hernanz, M.;
van der Klis, M.;
Pohl, M.;
Santangelo, A.;
Stella, L.;
Watts, A.;
Wilms, J.;
Zane, S.;
Ahangarianabhari, M.;
Albertus, C.;
Alford, M.;
Alpar, A.;
Altamirano, D.;
Alvarez, L.;
Amati, L.;
Amoros, C.;
Andersson, N.;
Antonelli, A.;
Argan, A.;
Artigue, R.;
Artigues, B.;
Atteia, J. -L.;
Azzarello, P.;
Bakala, P.;
Baldazzi, G.;
Balman, S.;
Barbera, M.;
van Baren, C.;
Bhattacharyya, S.;
Baykal, A.;
Belloni, T.;
Bernardini, F.;
Bertuccio, G.;
Bianchi, S.;
Bianchini, A.;
Binko, P.;
Blay, P.;
Bocchino, F.;
Bodin, P.;
Bombaci, I.;
Bidaud, J. -M. Bonnet;
Boutloukos, S.;
Bradley, L.;
Braga, J.;
Brown, E.;
Bucciantini, N.;
Burderi, L.;
Burgay, M.;
Bursa, M.;
Budtz-Jørgensen, C.;
Cackett, E.;
Cadoux, F. R.;
Cais, P.;
Caliandro, G. A.;
Campana, R.;
Campana, S.;
Capitanio, F.;
Casares, J.;
Casella, P.;
Castro-Tirado, A. J.;
Cavazzuti, E.;
Cerda-Duran, P.;
Chakrabarty, D.;
Château, F.;
Chenevez, J.;
Coker, J.;
Cole, R.;
Collura, A.;
Cornelisse, R.;
Courvoisier, T.;
Cros, A.;
Cumming, A.;
Cusumano, G.;
D'Aì, A.;
D'Elia, V.;
Del Monte, E.;
De Luca, A.;
De Martino, D.;
Dercksen, J. P. C.;
De Pasquale, M.;
De Rosa, A.;
Del Santo, M.;
Di Cosimo, S.;
Diebold, S.;
Di Salvo, T.;
Donnarumma, I.;
Drago, A.;
Durant, M.;
Emmanoulopoulos, D.;
Erkut, M. H.;
Esposito, P.;
Evangelista, Y.;
Fabian, A.;
Falanga, M.;
Favre, Y.;
Feldman, C.;
Ferrari, V.;
Ferrigno, C.;
Finger, M.;
Finger, M. H.;
Fraser, G. W.;
Frericks, M.;
Fuschino, F.;
Gabler, M.;
Galloway, D. K.;
Sanchez, J. L. Galvez;
Garcia-Berro, E.;
Gendre, B.;
Gezari, S.;
Giles, A. B.;
Gilfanov, M.;
Giommi, P.;
Giovannini, G.;
Giroletti, M.;
Gogus, E.;
Goldwurm, A.;
Goluchová, K.;
Götz, D.;
Gouiffes, C.;
Grassi, M.;
Groot, P.;
Gschwender, M.;
Gualtieri, L.;
Guidorzi, C.;
Guy, L.;
Haas, D.;
Haensel, P.;
Hailey, M.;
Hansen, F.;
Hartmann, D. H.;
Haswell, C. A.;
Hebeler, K.;
Heger, A.;
Hermsen, W.;
Homan, J.;
Hornstrup, A.;
Hudec, R.;
Huovelin, J.;
Ingram, A.;
Zand, J. J. M. in't;
Israel, G.;
Iwasawa, K.;
Izzo, L.;
Jacobs, H. M.;
Jetter, F.;
Johannsen, T.;
Jacobs, H. M.;
Jonker, P.;
Josè, J.;
Kaaret, P.;
Kanbach, G.;
Karas, V.;
Karelin, D.;
Kataria, D.;
Keek, L.;
Kennedy, T.;
Klochkov, D.;
Kluzniak, W.;
Kokkotas, K.;
Korpela, S.;
Kouveliotou, C.;
Kreykenbohm, I.;
Kuiper, L. M.;
Kuvvetli, I.;
Labanti, C.;
Lai, D.;
Lamb, F. K.;
Laubert, P. P.;
Lebrun, F.;
Lin, D.;
Linder, D.;
Lodato, G.;
Longo, F.;
Lund, N.;
Maccarone, T. J.;
Macera, D.;
Maestre, S.;
Mahmoodifar, S.;
Maier, D.;
Malcovati, P.;
Mandel, I.;
Mangano, V.;
Manousakis, A.;
Marisaldi, M.;
Markowitz, A.;
Martindale, A.;
Matt, G.;
McHardy, I. M.;
Melatos, A.;
Mendez, M.;
Mereghetti, S.;
Michalska, M.;
Migliari, S.;
Mignani, R.;
Miller, M. C.;
Miller, J. M.;
Mineo, T.;
Miniutti, G.;
Morsink, S.;
Motch, C.;
Motta, S.;
Mouchet, M.;
Mouret, G.;
Mulačová, J.;
Muleri, F.;
Muñoz-Darias, T.;
Negueruela, I.;
Neilsen, J.;
Norton, A. J.;
Nowak, M.;
O'Brien, P.;
Olsen, P. E. H.;
Orienti, M.;
Orio, M.;
Orlandini, M.;
Orleanski, P.;
Osborne, J. P.;
Osten, R.;
Ozel, F.;
Pacciani, L.;
Paolillo, M.;
Papitto, A.;
Paredes, J. M.;
Patruno, A.;
Paul, B.;
Perinati, E.;
Pellizzoni, A.;
Penacchioni, A. V.;
Perez, M. A.;
Petracek, V.;
Pittori, C.;
Pons, J.;
Portell, J.;
Possenti, A.;
Poutanen, J.;
Prakash, M.;
Provost, P. Le;
Psaltis, D.;
Rambaud, D.;
Ramon, P.;
Ramsay, G.;
Rapisarda, M.;
Rachevski, A.;
Rashevskaya, I.;
Ray, P. S.;
Rea, N.;
Reddy, S.;
Reig, P.;
Aranda, M. Reina;
Remillard, R.;
Reynolds, C.;
Rezzolla, L.;
Ribo, M.;
de la Rie, R.;
Riggio, A.;
Rios, A.;
Gil, P. Rodríguez-;
Rodriguez, J.;
Rohlfs, R.;
Romano, P.;
Rossi, E. M. R.;
Rozanska, A.;
Rousseau, A.;
Ryde, F.;
Sabau-Graziati, L.;
Sala, G.;
Salvaterra, R.;
Sanna, A.;
Sandberg, J.;
Scaringi, S.;
Schanne, S.;
Schee, J.;
Schmid, C.;
Shore, S.;
Schneider, R.;
Schwenk, A.;
Schwope, A. D.;
Seyler, J. -Y.;
Shearer, A.;
Smith, A.;
Smith, D. M.;
Smith, P. J.;
Sochora, V.;
Soffitta, P.;
Soleri, P.;
Spencer, A.;
Stappers, B.;
Steiner, A. W.;
Stergioulas, N.;
Stratta, G.;
Strohmayer, T. E.;
Stuchlik, Z.;
Suchy, S.;
Sulemainov, V.;
Takahashi, T.;
Tamburini, F.;
Tauris, T.;
Tenzer, C.;
Tolos, L.;
Tombesi, F.;
Tomsick, J.;
Torok, G.;
Torrejon, J. M.;
Torres, D. F.;
Tramacere, A.;
Trois, A.;
Turolla, R.;
Turriziani, S.;
Uter, P.;
Uttley, P.;
Vacchi, A.;
Varniere, P.;
Vaughan, S.;
Vercellone, S.;
Vrba, V.;
Walton, D.;
Watanabe, S.;
Wawrzaszek, R.;
Webb, N.;
Weinberg, N.;
Wende, H.;
Wheatley, P.;
Wijers, R.;
Wijnands, R.;
Wille, M.;
Wilson-Hodge, C. A.;
Winter, B.;
Wood, K.;
Zampa, G.;
Zampa, N.;
Zampieri, L.;
Zdunik, L.;
Zdziarski, A.;
Zhang, B.;
Zwart, F.;
Ayre, M.;
Boenke, T.;
van Damme, C. Corral;
Kuulkers, E.;
Lumb, D.
Submitted: 2014-08-27, last modified: 2014-08-29
The Large Observatory For x-ray Timing (LOFT) was studied within ESA M3
Cosmic Vision framework and participated in the final down-selection for a
launch slot in 2022-2024. Thanks to the unprecedented combination of effective
area and spectral resolution of its main instrument, LOFT will study the
behaviour of matter under extreme conditions, such as the strong gravitational
field in the innermost regions of accretion flows close to black holes and
neutron stars, and the supra-nuclear densities in the interior of neutron
stars. The science payload is based on a Large Area Detector (LAD, 10 m 2
effective area, 2-30 keV, 240 eV spectral resolution, 1 deg collimated field of
view) and a WideField Monitor (WFM, 2-50 keV, 4 steradian field of view, 1
arcmin source location accuracy, 300 eV spectral resolution). The WFM is
equipped with an on-board system for bright events (e.g. GRB) localization. The
trigger time and position of these events are broadcast to the ground within 30
s from discovery. In this paper we present the status of the mission at the end
of its Phase A study.
[3]
oai:arXiv.org:1406.7759 [pdf] - 1215301
The X-/Gamma-ray camera ECLAIRs for the Gammay-ray burst mission SVOM
Godet, O.;
Nasser, G.;
Atteia, J. -L.;
Cordier, B.;
Mandrou, P.;
Barret, D.;
Triou, H.;
Pons, R.;
Amoros, C.;
Bordon, S.;
Gevin, O.;
Gonzalez, F.;
Götz, D.;
Gros, A.;
Houret, B.;
Lachaud, C.;
Lacombe, K.;
Marty, W.;
Mercier, K.;
Rambaud, D.;
Ramon, P.;
Rouaix, G.;
Schanne, S.;
Waegebaert, V
Submitted: 2014-06-30
We present ECLAIRs, the Gamma-ray burst (GRB) trigger camera to fly on-board
the Chinese-French mission SVOM. ECLAIRs is a wide-field ($\sim 2$\,sr) coded
mask camera with a mask transparency of 40\% and a 1024 $\mathrm{cm}^2$
detection plane coupled to a data processing unit, so-called UGTS, which is in
charge of locating GRBs in near real time thanks to image and rate triggers. We
present the instrument science requirements and how the design of ECLAIRs has
been optimized to increase its sensitivity to high-redshift GRBs and
low-luminosity GRBs in the local Universe, by having a low-energy threshold of
4 keV. The total spectral coverage ranges from 4 to 150 keV. ECLAIRs is
expected to detect $\sim 200$ GRBs of all types during the nominal 3 year
mission lifetime.
To reach a 4 keV low-energy threshold, the ECLAIRs detection plane is paved
with 6400 $4\times 4~\mathrm{mm}^2$ and 1 mm-thick Schottky CdTe detectors. The
detectors are grouped by 32, in 8x4 matrices read by a low-noise ASIC, forming
elementary modules called XRDPIX. In this paper, we also present our current
efforts to investigate the performance of these modules with their front-end
electronics when illuminated by charged particles and/or photons using
radioactive sources. All measurements are made in different instrument
configurations in vacuum and with a nominal in-flight detector temperature of
$-20^\circ$C. This work will enable us to choose the in-flight configuration
that will make the best compromise between the science performance and the
in-flight operability of ECLAIRs. We will show some highlights of this work.
[5]
oai:arXiv.org:1307.4545 [pdf] - 1941894
The NectarCAM camera project
Glicenstein, J-F.;
Barcelo, M.;
Barrio, J-A.;
Blanch, O.;
Boix, J.;
Bolmont, J.;
Boutonnet, C.;
Cazaux, S.;
Chabanne, E.;
Champion, C.;
Chateau, F.;
Colonges, S.;
Corona, P.;
Couturier, S.;
Courty, B.;
Delagnes, E.;
Delgado, C.;
Ernenwein, J-P.;
Fegan, S.;
Ferreira, O.;
Fesquet, M.;
Fontaine, G.;
Fouque, N.;
Henault, F.;
Gascón, D.;
Herranz, D.;
Hermel, R.;
Hoffmann, D.;
Houles, J.;
Karkar, S.;
Khelifi, B.;
Knödlseder, J.;
Martinez, G.;
Lacombe, K.;
Lamanna, G.;
LeFlour, T.;
Lopez-Coto, R.;
Louis, F.;
Mathieu, A.;
Moulin, E.;
Nayman, P.;
Nunio, F.;
Olive, J-F.;
Panazol, J-L.;
Petrucci, P-O.;
Punch, M.;
Prast, J.;
Ramon, P.;
Riallot, M.;
Ribó, M.;
Rosier-Lees, S.;
Sanuy, A.;
Siero, J.;
Tavernet, J-P.;
Tejedor, L. A.;
Toussenel, F.;
Vasileiadis, G.;
Voisin, V.;
Waegebert, V.;
Zurbach, C.
Submitted: 2013-07-17
In the framework of the next generation of Cherenkov telescopes, the
Cherenkov Telescope Array (CTA), NectarCAM is a camera designed for the medium
size telescopes covering the central energy range of 100 GeV to 30 TeV.
NectarCAM will be finely pixelated (~ 1800 pixels for a 8 degree field of view,
FoV) in order to image atmospheric Cherenkov showers by measuring the charge
deposited within a few nanoseconds time-window. It will have additional
features like the capacity to record the full waveform with GHz sampling for
every pixel and to measure event times with nanosecond accuracy. An array of a
few tens of medium size telescopes, equipped with NectarCAMs, will achieve up
to a factor of ten improvement in sensitivity over existing instruments in the
energy range of 100 GeV to 10 TeV. The camera is made of roughly 250
independent read-out modules, each composed of seven photo-multipliers, with
their associated high voltage base and control, a read-out board and a
multi-service backplane board. The read-out boards use NECTAr (New Electronics
for the Cherenkov Telescope Array) ASICs which have the dual functionality of
analogue memories and Analogue to Digital Converter (ADC). The camera trigger
to be used will be flexible so as to minimize the read-out dead-time of the
NECTAr chips. We present the camera concept and the design and tests of the
various subcomponents. The design includes the mechanical parts, the cooling of
the electronics, the readout, the data acquisition, the trigger, the monitoring
and services.