Normalized to: Rafalski, J.
[1]
oai:arXiv.org:1709.04244 [pdf] - 1620692
Control Software for the SST-1M Small-Size Telescope prototype for the
Cherenkov Telescope Array
Sliusar, V.;
Walter, R.;
Alispach, C.;
Samarai, I. Al;
Bilnik, W.;
Błocki, J.;
Bogacz, L.;
Bulik, T.;
Cadoux, F.;
Coco, V.;
della Volpe, D.;
Favre, Y.;
Frankowski, A.;
Grudzińska, M.;
Heller, M.;
Jamrozy, M.;
Janiak, M.;
Kasperek, J.;
Lalik, K.;
Lyard, E.;
Mach, E.;
Mandat, D.;
Michałowski, J.;
Moderski, R.;
Montaruli, T.;
Neronov, A.;
Niemiec, J.;
Ekoume, T. R. S. Njoh;
Ostrowski, M.;
Paśko, P.;
Pech, M.;
Rajda, P.;
Rafalski, J.;
Schovanek, P.;
Seweryn, K.;
Skowron, K.;
Stawarz, Ł.;
Stodulska, M.;
Stodulski, M.;
Pujadas, I. Troyano;
Wiȩcek, M.;
Zagdański, A.;
Ziȩtara, K.
Submitted: 2017-09-13, last modified: 2017-09-14
The SST-1M is a 4-m Davies--Cotton atmospheric Cherenkov telescope optimized
to provide gamma-ray sensitivity above a few TeV. The SST-1M is proposed as
part of the Small-Size Telescope array for the Cherenkov Telescope Array (CTA),
the first prototype has already been deployed. The SST-1M control software of
all subsystems (active mirror control, drive system, safety system,
photo-detection plane, DigiCam, CCD cameras) and the whole telescope itself
(master controller) uses the standard software design proposed for all CTA
telescopes based on the ALMA Common Software (ACS) developed to control the
Atacama Large Millimeter Array (ALMA). Each subsystem is represented by a
separate ACS component, which handles the communication to and the operation of
the subsystem. Interfacing with the actual hardware is performed via the OPC UA
communication protocol, supported either natively by dedicated industrial
standard servers (PLCs) or separate service applications developed to wrap
lower level protocols (e.g. CAN bus, camera slow control) into OPC UA. Early
operations of the telescope without the camera were already carried out. The
camera is fully assembled and is capable to perform data acquisition using
artificial light source.
[2]
oai:arXiv.org:1709.03914 [pdf] - 1620686
Performance of a small size telescope (SST-1M) camera for gamma-ray
astronomy with the Cherenkov Telescope Array
Samarai, I. Al;
Alispach, C.;
Cadoux, F.;
Coco, V.;
della Volpe, D.;
Favre, Y.;
Heller, M.;
Montaruli, T.;
Nagai, A.;
Ekoume, T. R. S. Njoh;
Pujadas, I. Troyano;
Lyard, E.;
Neronov, A.;
Walter, R.;
Sliusar, V.;
Mach, E.;
Michałowski, J.;
Niemiec, J.;
Rafalski, J.;
Skowron, K.;
Stodulska, M.;
Stodulski, M.;
Bulik, T.;
Grudzińska, M.;
Jamrozy, M.;
Ostrowski, M.;
Stawarz, Ł.;
Zagdański, A.;
Ziȩtara, K.;
Paśko, P.;
Seweryn, K.;
Borkowski, J.;
Moderski, R.;
Kasperek, J.;
Rajda, P.;
Mandat, D.;
Pech, M.;
Schovanek, P.;
Travnicek, P.
Submitted: 2017-09-12
The foreseen implementations of the Small Size Telescopes (SST) in CTA will
provide unique insights into the highest energy gamma rays offering fundamental
means to discover and under- stand the sources populating the Galaxy and our
local neighborhood. Aiming at such a goal, the SST-1M is one of the three
different implementations that are being prototyped and tested for CTA. SST-1M
is a Davies-Cotton single mirror telescope equipped with a unique camera
technology based on SiPMs with demonstrated advantages over classical
photomultipliers in terms of duty-cycle. In this contribution, we describe the
telescope components, the camera, and the trigger and readout system. The
results of the commissioning of the camera using a dedicated test setup are
then presented. The performances of the camera first prototype in terms of
expected trigger rates and trigger efficiencies for different night-sky
background conditions are presented, and the camera response is compared to
end-to-end simulations.
[3]
oai:arXiv.org:1709.03920 [pdf] - 1620687
Development of a strategy for calibrating the novel SiPM camera of the
SST-1M telescope proposed for the Cherenkov Telescope Array
Samarai, I. Al;
Alispach, C.;
Cadoux, F.;
Coco, V.;
della Volpe, D.;
Favre, Y.;
Heller, M.;
Montaruli, T.;
Nagai, A.;
Ekoume, T. R. S. Njoh;
Pujadas, I. Troyano;
Lyard, E.;
Neronov, A.;
Walter, R.;
Sliusar, V.;
Mach, E.;
Michałowski, J.;
Niemiec, J.;
Rafalski, J.;
Skowron, K.;
Stodulska, M.;
Stodulski, M.;
Bulik, T.;
Grudzińska, M.;
Jamrozy, M.;
Ostrowski, M.;
Stawarz, Ł.;
Zagdański, A.;
Ziȩtara, K.;
Paśko, P.;
Seweryn, K.;
Borkowski, J.;
Moderski, R.;
Kasperek, J.;
Rajda, P.;
Mandat, D.;
Pech, M.;
Schovanek, P.;
Travnicek, P.
Submitted: 2017-09-12
CTA will comprise a sub-array of up to 70 small size telescopes (SSTs) at the
southern array. The SST-1M project, a 4 m-diameter Davies Cotton telescope with
9 degrees FoV and a 1296 pixels SiPM camera, is designed to meet the
requirements of the next generation ground based gamma-ray observatory CTA in
the energy range above 3 TeV. Silicon photomultipliers (SiPM) cameras of
gamma-ray telescopes can achieve good performance even during high night sky
background conditions. Defining a fully automated calibration strategy of SiPM
cameras is of great importance for large scale production validation and online
calibration. The SST-1M sub-consortium developed a software compatible with CTA
pipeline software (CTApipe). The calibration of the SST-1M camera is based on
the Camera Test Setup (CTS), a set of LED boards mounted in front of the
camera. The CTS LEDs are operated in pulsed or continuous mode to emulate
signal and night sky background respectively. Continuous and pulsed light data
analysis allows us to extract single pixel calibration parameters to be used
during CTA operation.