Thanks to their large angular dimension and brightness, red giants and supergiants are privileged targets for optical long-baseline interferometers. Sixteen red giants and supergiants have been observed with the VLTI/AMBER facility over a two-years period, at medium spectral resolution (R=1500) in the K band. The limb-darkened angular diameters are derived from fits of stellar atmospheric models on the visibility and the triple product data. The angular diameters do not show any significant temporal variation, except for one target: TX Psc, which shows a variation of 4% using visibility data. For the eight targets previously measured by Long-Baseline Interferometry (LBI) in the same spectral range, the difference between our diameters and the literature values is less than 5%, except for TX Psc, which shows a difference of 11%. For the 8 other targets, the present angular diameters are the first measured from LBI. Angular diameters are then used to determine several fundamental stellar parameters, and to locate these targets in the Hertzsprung-Russell Diagram (HRD). Except for the enigmatic Tc-poor low-mass carbon star W Ori, the location of Tc-rich stars in the HRD matches remarkably well the thermally-pulsating AGB, as it is predicted by the stellar-evolution models. For pulsating stars with periods available, we compute the pulsation constant and locate the stars along the various sequences in the Period -- Luminosity diagram. We confirm the increase in mass along the pulsation sequences, as predicted by the theory, except for W Ori which, despite being less massive, appears to have a longer period than T Cet along the first-overtone sequence.

Extracting stellar fundamental parameters from SPectro-Interferometric (SPI) data requires reliable estimates of observables and with robust uncertainties (visibility, triple product, phase closure). A number of fine calibration procedures is necessary throughout the reduction process. Testing departures from centro-symmetry of brightness distributions is a useful complement. Developing a set of automatic routines, called SPIDAST (made available to the community) to reduce, calibrate and interpret raw data sets of instantaneous spectro-interferograms at the spectral channel level, we complement (and in some respects improve) the ones contained in the amdlib Data Reduction Software. Our new software SPIDAST is designed to work in an automatic mode, free from subjective choices, while being versatile enough to suit various processing strategies. SPIDAST performs the following automated operations: weighting of non-aberrant SPI data (visibility, triple product), fine spectral calibration (sub-pixel level), accurate and robust determinations of stellar diameters for calibrator sources (and their uncertainties as well), correction for the degradations of the interferometer response in visibility and triple product, calculation of the Centro-Symmetry Parameter (CSP) from the calibrated triple product, fit of parametric chromatic models on SPI observables, to extract model parameters. SPIDAST is currently applied to the scientific study of 18 cool giant and supergiant stars, observed with the VLTI/AMBER facility at medium resolution in the K band. Because part of their calibrators have no diameter in the current catalogs, SPIDAST provides new determinations of the angular diameters of all calibrators. Comparison of SPIDAST final calibrated observables with amdlib determinations shows good agreement, under good and poor seeing conditions.

Context. It has been shown that convection in red supergiant stars gives rise to large granules causing surface inhomogeneities together with shock waves in the photosphere. The resulting motion of the photocenter (on time scales ranging from months to years) could possibly have adverse effects on the parallax determination with Gaia. Aims. We explore the impact of the granulation on the photocentric and photometric variability. We quantify these effects in order to better characterize the error possibly altering the parallax. Methods. We use 3D radiative-hydrodynamics simulations of convection with CO5BOLD and the post-processing radiative transfer code OPTIM3D to compute intensity maps and spectra in the Gaia G band [325-1030 nm]. Results. We provide astrometric and photometric predictions from 3D simulations of RSGs that are used to evaluate the degradation of the astrometric parameters of evolved stars derived by Gaia. We show from RHD simulations that a supergiant like Betelgeuse exhibits a photocentric noise characterised by a standard deviation of the order of 0.1 AU. The number of bright giant and supergiant stars whose Gaia parallaxes will be altered by the photocentric noise ranges from a few tens to several thousandths. The degradation of the astrometric fit due to the presence of this photocentric noise will be noticeable up to about 5 kpc for the brightest supergiants. Moreover, parallaxes of supergiants are affected by a error of the order of a few percents. We show that the photocentric noise, as predicted by the 3D simulation, does account for a substantial part of the supplementary 'cosmic noise' that affects Hipparcos measurements of Betelgeuse and Antares.

Over 300 extrasolar planets (exoplanets) have been detected orbiting nearby stars. We now hope to conduct a census of all planets around nearby stars and to characterize their atmospheres and surfaces with spectroscopy. Rocky planets within their star's habitable zones have the highest priority, as these have the potential to harbor life. Our science goal is to find and characterize all nearby exoplanets; this requires that we measure the mass, orbit, and spectroscopic signature of each one at visible and infrared wavelengths. The techniques for doing this are at hand today. Within the decade we could answer long-standing questions about the evolution and nature of other planetary systems, and we could search for clues as to whether life exists elsewhere in our galactic neighborhood.

The achromatic phase shifter (APS) is a component of the Bracewell nulling interferometer studied in preparation for future space missions (viz. Darwin/TPF-I) focusing on spectroscopic study of Earth-like exo-planets. Several possible designs of such an optical subsystem exist. Four approaches were selected for further study. Thales Alenia Space developed a dielectric prism APS. A focus crossing APS prototype was developed by the OCA, Nice, France. A field reversal APS prototype was prepared by the MPIA in Heidelberg, Germany. Centre Spatial de Li\`ege develops a concept based on Fresnel's rhombs. This paper presents a progress report on the current work aiming at evaluating these prototypes on the SYNAPSE test bench at the Institut d'Astrophysique Spatiale in Orsay, France.

The discovery of extra-solar planets is one of the greatest achievements of modern astronomy. The detection of planets with a wide range of masses demonstrates that extra-solar planets of low mass exist. In this paper we describe a mission, called Darwin, whose primary goal is the search for, and characterization of, terrestrial extrasolar planets and the search for life. Accomplishing the mission objectives will require collaborative science across disciplines including astrophysics, planetary sciences, chemistry and microbiology. Darwin is designed to detect and perform spectroscopic analysis of rocky planets similar to the Earth at mid-infrared wavelengths (6 - 20 micron), where an advantageous contrast ratio between star and planet occurs. The baseline mission lasts 5 years and consists of approximately 200 individual target stars. Among these, 25 to 50 planetary systems can be studied spectroscopically, searching for gases such as CO2, H2O, CH4 and O3. Many of the key technologies required for the construction of Darwin have already been demonstrated and the remainder are estimated to be mature in the near future. Darwin is a mission that will ignite intense interest in both the research community and the wider public.

We report on the Achromatic Interfero Coronagraph, a focal imaging device which aims at rejecting the energy contribution of a point-like source set on-axis, so as to make detectable its angularly-close environment (applicable to stellar environment: circumstellar matter, faint companions, planetary systems, but also conceivably to Active Galatic Nucleii and multiple asteroids). With AIC, starlight rejection is based on destructive interference, which allows exploration of the star's neighbouring at angular resolution better than the diffraction limit of the hosting telescope. Thanks to the focus crossing property of light, rejection is achromatic thus yielding a large spectral bandwidth of work. Descriptions and comments are given regarding the principle, the device itself, the constraints and limitations, and the theoretical performance. Results are presented which demonstrate the close-sensing capability and which show images of a companion obtained in laboratory and 'on the sky' as well. A short pictorial description of alternative AIC concepts, CIAXE and Open-Air CIAXE, currently under study, is given.

On-axis achromatic interfero-coronagraph. We present a new type of stellar interfero-coronagraph, the "CIAXE", which is a variant of the "AIC", the Achromatic Interfero-Coronagraph [3,4]. The CIAXE is characterized by a very simple, compact and fully coaxial optical combination. Indeed, contrarily to the classical AIC which has a Michelson interferometer structure, the CIAXE delivers its output beam on the same axis as the input beam. This will ease its insertion in the focal instrumentation of existing telescopes or next generation ones. Such a device could be a step forward in the field of instrumental search for exoplanets. ----- Dans le but deparvenir \`a l'imagerie \`a haute dynamique d'objets comme les exoplan\`etes, nous pr\'esentons ici un nouveau concept de coronographe stellaire interf\'erentiel, le "CIAXE". Il est d\'eriv\'e du "CIA", le Coronographe Interf\'erentiel Achromatique. Le CIAXE se distingue de son pr\'ed\'ecesseur par une combinaison optique originale, simplifi\'ee, tr\`es compacte et totalement coaxiale. En effet, \`a la diff\'erence du CIA classique qui est d\'eriv\'e de l'interf\'erom\`etre de Michelson, le CIAXE d\'elivre son faisceau de sortie sur le m\^eme axe que le faisceau d'entr\'ee, ce qui facilitera grandement son insertion au sein de l'instrumentation focale d'un t\'elescope. Un tel dispositif pourrait constituer une avanc\'ee en mati\`ere d'instrumentation focale pour la recherche d'exoplan\`etes.

In this work, we present the first AMBER observations, of the Wolf-Rayet and O (WR+O) star binary system y2 Velorum. The AMBER instrument was used with the telescopes UT2, UT3, and UT4 on baselines ranging from 46m to 85m. It delivered spectrally dispersed visibilities, as well as differential and closure phases, with a resolution R = 1500 in the spectral band 1.95-2.17 micron. We interpret these data in the context of a binary system with unresolved components, neglecting in a first approximation the wind-wind collision zone flux contribution. We show that the AMBER observables result primarily from the contribution of the individual components of the WR+O binary system. We discuss several interpretations of the residuals, and speculate on the detection of an additional continuum component, originating from the free-free emission associated with the wind-wind collision zone (WWCZ), and contributing at most to the observed K-band flux at the 5% level. The expected absolute separation and position angle at the time of observations were 5.1±0.9mas and 66±15° respectively. However, we infer a separation of 3.62+0.11-0.30 mas and a position angle of 73+9-11°. Our analysis thus implies that the binary system lies at a distance of 368+38-13 pc, in agreement with recent spectrophotometric estimates, but significantly larger than the Hipparcos value of 258+41-31 pc.