Accurate atomic data is an essential ingredient for the calculation of reliable non-local thermodynamic equilibrium (NLTE) model atmospheres that are mandatory for the spectral analysis of hot stars. We aim to search for and identify for the first time spectral lines of copper (atomic number Z = 29) and indium (Z = 49) in hot white dwarf (WD) stars and to subsequently determine their photospheric abundances. Oscillator strengths of Cu IV - VII were calculated to include radiative and collisional bound-bound transitions of Cu in our NLTE model-atmosphere calculations. Oscillator strengths of In IV - VI were compiled from the literature. We newly identified 1 Cu IV, 51 Cu V, 2 Cu VI, and 5 In Vlines in the ultraviolet (UV) spectrum of DO-type WD RE 0503-289. We determined the photospheric abundances of 9.3 X 10**-5 (mass fraction, 132 times solar) and 3.0 X 10**-5 (56 600 times solar), respectively; we also found Cu overabundances in the DA-type WD G191-B2B (6.3 X 10**-6, 9 times solar). All identified Cu IV - VI lines in the UV spectrum of RE 0503-289 were simultaneously well reproduced with our newly calculated oscillator strengths. With the detection of Cu and In in RE 0503-289, the total number of trans-iron elements (Z > 28) in this extraordinary WD reaches an unprecedented number of 18.

Aims. In the context of black-hole accretion disks, we aim to compute the plasma-environment effects on the atomic parameters used to model the decay of K-vacancy states in moderately charged iron ions, namely Fe ix - Fe xvi. Methods. We used the fully relativistic multiconfiguration Dirac-Fock (MCDF) method approximating the plasma electron-nucleus and electron-electron screenings with a time-averaged Debye-Huckel potential. Results. We report modified ionization potentials, K-threshold energies, wavelengths, radiative emission rates, and Auger widths for plasmas characterized by electron temperatures and densities in the ranges $10^5$ - $10^7$ K and $10^{18}$ - $10^{22}$ cm$^{-3}$. Conclusions. This study confirms that the high-resolution X-ray spectrometers onboard the future XRISM and ATHENA space missions will be capable of detecting the lowering of the K edges of these ions due to the extreme plasma conditions occurring in accretion disks around compact objects.

We have identified 484 lines of the trans-iron elements (TIEs) Zn, Ga, Ge, Se, Br, Kr, Sr, Zr, Mo, In, Te, I, Xe, and Ba, for the first time in the ultraviolet spectrum of a DAO-type WD, namely BD$-22{^\circ}3467$, surrounded by the ionized nebula Abell 35. Our TIE abundance determination shows extremely high overabundances of up to five dex -- a similar effect is already known from hot, H-deficient (DO-type) white dwarfs. In contrast to these where a pulse-driven convection zone has enriched the photosphere with TIEs during a final thermal pulse and radiative levitation has established the extreme TIE overabundances, {here the extreme TIE overabundances are exclusively driven by radiative levitation on the initial stellar metallicity. The very low mass ($0.533^{+0.040}_{-0.025}\,M_\odot$) of BD$-22{^\circ}3467$ implies that a third dredge-up with enrichment of s-process elements in the photosphere did not occur in the AGB precursor.

This is the final report of a three-paper series on the K-shell photoabsorption and photoionization of trace elements, namely F, Na, P, Cl, K, Sc, Ti, V, Cr, Mn, Co, Cu and Zn. K lines and edges from such elements are observed in the X-ray spectra of supernova remnants, galaxy clusters and accreting black holes and neutron stars, their diagnostic potential being limited by poor atomic data. We are completing the previously reported radiative datasets with new photoabsorption and photoionization cross sections for isoelectronic sequences with electron number $19\leq N\leq 26$. We are also giving attention to the access, integrity and usability of the whole resulting atomic database. Target representations are obtained with the atomic structure code AUTOSTRUCTURE. Where possible, cross sections for ground-configuration states are computed with the Breit--Pauli $R$-matrix method (BPRM) in either intermediate or $LS$ coupling including damping (radiative and Auger) effects; otherwise and more generally, they are generated in the isolated-resonance approximation with AUTOSTRUCTURE. Cross sections were computed with BPRM only for the K ($N=19$) and Ca ($N=20$) isoelectronic sequences, the latter in $LS$ coupling. For the rest of the sequences ($21\leq N \leq 26$), AUTOSTRUCTURE was run in $LS$-coupling mode taking into account damping effects. Comparisons between these two methods for K-like Zn XII and Ca-like Zn XI show that, to ensure reasonable accuracy, the $LS$ calculations must be performed taking into account the non-fine-structure relativistic corrections.

In most accreting black-hole systems the copious X-rays commonly observed from the inner-most regions are accompanied by a reflection spectrum. The latter is the signature of energetic photons reprocessed by the optically thick material of an accretion disk. Given their abundance and fluorescence yield, the iron K-shell lines are the most prominent features in the X-ray reflected spectrum. Their line profiles can be grossly broadened and skewed by Doppler effects and gravitational redshift. Consequently, modeling the reflection spectrum provides one of the best methods to measure, among other physical quantities, the black-hole spin. At present the accuracy of the spin estimates is called into question because the data fits require very high iron abundances: typically several times the solar value. Concurrently no plausible physical explanation has been proffered for these black-hole systems to be so iron rich. The most likely explanation for the supersolar iron abundances is model shortfall at very high densities ($>10^{18}$ cm$^{-3}$) due to atomic data shortcomings in this regime. We review the current observational evidence for the iron supersolar abundance in many black-hole systems, and show the effects of high density in state-of-the-art reflection models. We also briefly discuss our current efforts to produce new atomic data for high-density plasmas, which are required to refine the photoionization models.

The present debate on the reliability of astrophysical opacities has reached a new climax with the recent measurements of Fe opacities on the Z-machine at the Sandia National Laboratory \citep{Bailey2015}. To understand the differences between theoretical results, on the one hand, and experiments on the other, as well as the differences among the various theoretical results, detailed comparisons are needed. Many ingredients are involved in the calculation of opacities; deconstructing the whole process and comparing the differences at each step are necessary to quantify their importance and impact on the final results. We present here such a comparison using the two main approaches to calculate the required atomic data, the $R$-Matrix and distorted-wave methods, as well as sets of configurations and coupling schemes to quantify the effects on the opacities for the $Fe\ XVII$ and $Ni\ XIV$ ions.

The lifetimes of 17 even-parity levels (3d5s, 3d4d, 3d6s, and 4p$^2$) in the region 57743-77837 cm$^{-1}$ of singly ionised scandium (\ion{Sc}{ii}) were measured by two-step time-resolved laser induced fluorescence spectroscopy. Oscillator strengths of 57 lines from these highly excited upper levels were derived using a hollow cathode discharge lamp and a Fourier transform spectrometer. In addition, Hartree--Fock calculations where both the main relativistic and core-polarisation effects were taken into account were carried out for both low- and high-excitation levels. There is a good agreement for most of the lines between our calculated branching fractions and the measurements of Lawler and Dakin (1989) in the region 9000-45000 cm$^{-1}$ for low excitation levels and with our measurements for high excitation levels in the region 23500-63100 cm$^{-1}$. This, in turn, allowed us to combine the calculated branching fractions with the available experimental lifetimes to determine semi-empirical oscillator strengths for a set of 380 E1 transitions in \ion{Sc}{ii}. These oscillator strengths include the weak lines that were used previously to derive the solar abundance of scandium. The solar abundance of scandium is now estimated to $\log~\epsilon_\odot = 3.04\pm0.13$ using these semi-empirical oscillator strengths to shift the values determined by Scott et al. (2015). The new estimated abundance value is in agreement with the meteoritic value ($\log~\epsilon_{\text{met}}=3.05\pm0.02$) of Lodders et al. (2009).

To analyze spectra of hot stars, advanced non-local thermodynamic equilibrium (NLTE) model-atmosphere techniques are mandatory. Reliable atomic data is for the calculation of such model atmospheres. We aim to calculate new Sr IV - VII oscillator strengths to identify for the first time Sr spectral lines in hot white dwarf (WD) stars and to determine the photospheric Sr abundances. o measure the abundances of Se, Te, and I in hot WDs, we aim to compute new Se V, Te VI, and I VI oscillator strengths. To consider radiative and collisional bound-bound transitions of Se V, Sr IV - VII, Te VI, and I VI in our NLTE atmosphere models, we calculated oscillator strengths for these ions. We newly identified four Se V, 23 Sr V, 1 Te VI, and three I VI lines in the ultraviolet (UV) spectrum of RE0503-289. We measured a photospheric Sr abundance of 6.5 +3.8/-2.4 x 10**-4 (mass fraction, 9500 - 23800 times solar). We determined the abundances of Se (1.6 +0.9/-0.6 x 10**-3, 8000 - 20000), Te (2.5 +1.5/-0.9 x 10**-4, 11000 - 28000), and I (1.4 +0.8/-0.5 x 10**-5, 2700 - 6700). No Se, Sr, Te, and I line was found in the UV spectra of G191-B2B and we could determine only upper abundance limits of approximately 100 times solar. All identified Se V, Sr V, Te VI, and I VI lines in the UV spectrum of RE0503-289 were simultaneously well reproduced with our newly calculated oscillator strengths.

We are concerned with improving the diagnostic potential of the K lines and edges of elements with low cosmic abundances that are observed in the X-ray spectra of supernova remnants, galaxy clusters and accreting black holes and neutron stars. Since accurate photoabsorption and photoionization cross sections are needed in their spectral models, they have been computed for isoelectronic sequences with electron number $12\leq N\leq 18$ using a multi-channel method. Target representations are obtained with the atomic structure code AUTOSTRUCTURE, and ground-state cross sections are computed with the Breit--Pauli $R$-matrix method (BPRM) in intermediate coupling, including damping (radiative and Auger) effects. The contributions from channels associated with the 2s-hole $[2{\rm s}]\mu$ target configurations and those containing 3d orbitals are studied in the Mg and Ar isoelectronic sequences. Cross sections for the latter ions are also calculated in the isolated-resonance approximation as implemented in AUTOSTRUCTURE and compared with BPRM to test their accuracy. It is confirmed that the collisional channels associated with the $[2{\rm s}]\mu$ target configurations must be taken into account owing to significant increases in the monotonic background cross section between the L and K edges. Target configurations with 3d orbitals give rise to fairly conspicuous unresolved transition arrays in the L-edge region, but to a much lesser extent in the K-edge which is our main concern; therefore, they have been neglected throughout owing to their computationally intractable channel inventory, thus allowing the computation of cross sections for all the ions with $12\leq N\leq 18$ in intermediate coupling with BPRM. We find that the isolated-resonance approximations performs satisfactorily.

This work reports new experimental radiative lifetimes and calculated oscillator strengths for transitions from 3d8 4d levels of astrophysical interest in singly ionized nickel. Radiative lifetimes of seven high-lying levels of even parity in Ni II (98400 -100600 cm-1) have been measured using the time-resolved laser-induced fluorescence method. Two-step photon excitation of ions produced by laser ablation has been utilized to populate the levels. Theoretical calculations of the radiative lifetimes of the measured levels and transition probabilities from these levels are reported. The calculations have been performed using a pseudo-relativistic Hartree-Fock method, taking into account core polarization effects. A new set of transition probabilities and oscillator strengths has been deduced for 477 Ni II transitions of astrophysical interest in the spectral range 194 - 520 nm depopulating even parity 3d8 4d levels. The new calculated gf-values are, on the average, about 20 % higher than a previous calculation by Kurucz (http://kurucz.harvard.edu) and yield lifetimes within 5 % of the experimental values.

For the spectral analysis of high-resolution and high-signal-to-noise spectra of hot stars, state-of-the-art non-local thermodynamic equilibrium (NLTE) model atmospheres are mandatory. These are strongly dependent on the reliability of the atomic data that is used for their calculation. To search for Zr and Xe lines in the ultraviolet (UV) spectra of G191-B2B and RE0503-289, new Zr IV-VII, Xe IV-V, and Xe VIII oscillator strengths were calculated. This allows for the first time, determination of the Zr abundance in white dwarf (WD) stars and improvement of the Xe abundance determinations. We calculated Zr IV-VII, Xe IV-V, and Xe VIII oscillator strengths to consider radiative and collisional bound-bound transitions of Zr and Xe in our NLTE stellar-atmosphere models for the analysis of their lines exhibited in UV observations of the hot WDs G191-B2B and RE0503-289. We identified one new Zr IV, 14 new Zr V, and ten new Zr VI lines in the spectrum of RE0503-289. Zr was detected for the first time in a WD. We measured a Zr abundance of -3.5 +/- 0.2 (logarithmic mass fraction, approx. 11 500 times solar). We dentified five new Xe VI lines and determined a Xe abundance of -3.9 +/- 0.2 (approx. 7500 times solar). We determined a preliminary photospheric Al abundance of -4.3 +/- 0.2 (solar) in RE0503-289. In the spectra of G191-B2B, no Zr line was identified. The strongest Zr IV line (1598.948 A) in our model gave an upper limit of -5.6 +/- 0.3 which is about 100 times solar. No Xe line was identified in the UV spectrum of G191-B2B and we confirmed the previously determined upper limit of -6.8 +/- 0.3 (ten times solar). Precise measurements and calculations of atomic data are a prerequisite for advanced NLTE stellar-atmosphere modeling. Observed Zr IV - VI and Xe VI - VII line profiles in the UV spectrum of RE0503-289 were simultaneously well reproduced.

In the line-of-sight toward the DO-type white dwarf RX J0503.9-2854, the density of the interstellar medium (ISM) is very low, and thus the contamination of the stellar spectrum almost negligible. This allows us to identify many metal lines in a wide wavelength range from the extreme ultraviolet to the near infrared. In previous spectral analyses, many metal lines in the ultraviolet spectrum of RX J0503.9-2854 have been identified. A complete line list of observed and identified lines is presented here. We compared synthetic spectra that had been calculated from model atmospheres in non-local thermodynamical equilibrium, with observations. In total, we identified 1272 lines (279 of them were newly assigned) in the wavelength range from the extreme ultraviolet to the near infrared. 287 lines remain unidentified. A close inspection of the EUV shows that still no good fit to the observed shape of the stellar continuum flux can be achieved although He, C, N, O, Al, Si, P, S, Ca, Sc, Ti, V, Cr, Mn, Fe, Cr, Ni Zn, Ga, Ge, As, Kr, Zr, Mo, Sn, Xe, and Ba are included in the stellar atmosphere models. There are two possible reasons for the deviation between observed and synthetic flux in the EUV. Opacities from hitherto unconsidered elements in the model-atmosphere calculation may be missing and/or the effective temperature is slightly lower than previously determined.

This work reports new experimental radiative lifetimes and calculated oscillator strengths for transitions of astrophysical interest in singly ionized cobalt. More precisely, nineteen radiative lifetimes in Co+ have been measured with the time-resolved laser-induced fluorescence technique using one- and two-step excitations. Out of these, seven belonging to the high lying 3d$^7$($^4$F)4d configuration in the energy range 90697 - 93738 cm$^{-1}$ are new, and the other twelve from th3d$^7$($^4$F)F)4p configuration with energies between 45972 and 49328 cm$^{-1}$1 are compared with previous measurements. In addition, a relativistic Hartree-Fock model including core-polarization effects has been employed to compute transition rates. Supported by the good agreement between theory and experiment for the lifetimes, new reliable transition probabilities and oscillator strengths have been deduced for 5080 Co II transitions in the spectral range 114 - 8744 nm.

We report the first identification of forbidden line components from an element heavier than helium in the spectrum of astrophysical plasmas. As yet, these components were identified only in laboratory plasmas and not in astrophysical objects. Forbidden components are well known for neutral helium lines in hot stars, particularly in helium-rich post-AGB stars and white dwarfs. We discovered that two hitherto unidentified lines in the ultraviolet spectra of hot hydrogen-deficient (pre-) white dwarfs can be identified as forbidden line components of triply ionized carbon (C IV). The forbidden components (3p-4f and 3d-4d) appear in the blue and red wings of the strong, Stark broadened 3p-4d and 3d-4f lines at 1108 Angstroem and 1169 Angstroem, respectively. They are visible over a wide effective temperature range (60,000-200,000 K) in helium-rich (DO) white dwarfs and PG1159 stars that have strongly oversolar carbon abundances.

For the spectral analysis of high-resolution and high-signal-to-noise (S/N) spectra of hot stars, state-of-the-art non-local thermodynamic equilibrium (NLTE) model atmospheres are mandatory. These are strongly dependent on the reliability of the atomic data that is used for their calculation. New of Kr IV - VII oscillator strengths for a large number of lines allow to construct more detailed model atoms for our NLTE model-atmosphere calculations. This enables us to search for additional Kr lines in observed spectra and to improve Kr abundance determinations. We calculated Kr IV - VII oscillator strengths to consider radiative and collisional bound-bound transitions in detail in our NLTE stellar-atmosphere models for the analysis of Kr lines exhibited in high-resolution and high-S/N ultraviolet (UV) observations of the hot white dwarf RE 0503-289. We reanalyzed the effective temperature and surface gravity and determined Teff = 70 000 +/- 2000 K and log (g / cm/s**2) = 7.5 +/- 0.1. We newly identified ten Kr V lines and one Kr VI line in the spectrum of RE 0503-289. We measured a Kr abundance of -3.3 +/- 0.3 (logarithmic mass fraction). We discovered that the interstellar absorption toward RE 0503-289 has a multi-velocity structure within a radial-velocity interval of -40 km/s < vrad < +18 km/s. Reliable measurements and calculations of atomic data are a prerequisite for state-of-the-art NLTE stellar-atmosphere modeling. Observed Kr V - VII line profiles in the UV spectrum of the white dwarf RE 0503-289 were simultaneously well reproduced with our newly calculated oscillator strengths.

For the spectral analysis of high-resolution and high-signal-to-noise (S/N) spectra of hot stars, state-of-the-art non-local thermodynamic equilibrium (NLTE) model atmospheres are mandatory. These are strongly dependent on the reliability of the atomic data that is used for their calculation. To identify molybdenum lines in the ultraviolet (UV) spectra of the DA-type white dwarf G191-B2B and the DO-type white dwarf RE0503-289 and to determine their photospheric Mo abundances, newly calculated Mo IV - VII oscillator strengths are used. We identified twelve Mo V and nine Mo VI lines in the UV spectrum of RE0503-289 and measured a photospheric Mo abundance of 1.2 - 3.0 x 10**-4 (mass fraction, 22500 - 56400 times the solar abundance). In addition, from the As V and Sn IV resonance lines, we measured mass fractions of arsenic (0.5 - 1.3 x 10**-5, about 300 - 1200 times solar) and tin (1.3 - 3.2 x 10**-4, about 14300 35200 times solar). For G191-B2B, upper limits were determined for the abundances of Mo (5.3 x 10**-7, 100 times solar) and, in addition, for Kr (1.1 x 10**-6, 10 times solar) and Xe (1.7 x 10**-7, 10 times solar). The arsenic abundance was determined (2.3 - 5.9 x 10**-7, about 21 - 53 times solar). A new, registered German Astrophysical Virtual Observatory (GAVO) service, TOSS, has been constructed to provide weighted oscillator strengths and transition probabilities. Reliable measurements and calculations of atomic data are a prerequisite for stellar-atmosphere modeling. Observed Mo V - VI line profiles in the UV spectrum of the white dwarf RE0503-289 were well reproduced with our newly calculated oscillator strengths. For the first time, this allowed to determine the photospheric Mo abundance in a white dwarf.

We present extensive calculations of radiative transition rates and electron impact collision strengths for Fe II. The data sets involve 52 levels from the $3d\,^7$, $3d\,^64s$, and $3d\,^54s^2$ configurations. Computations of $A$-values are carried out with a combination of state-of-the-art multiconfiguration approaches, namely the relativistic Hartree--Fock, Thomas--Fermi--Dirac potential, and Dirac--Fock methods; while the $R$-matrix plus intermediate coupling frame transformation, Breit--Pauli $R$-matrix and Dirac $R$-matrix packages are used to obtain collision strengths. We examine the advantages and shortcomings of each of these methods, and estimate rate uncertainties from the resulting data dispersion. We proceed to construct excitation balance spectral models, and compare the predictions from each data set with observed spectra from various astronomical objects. We are thus able to establish benchmarks in the spectral modeling of [Fe II] emission in the IR and optical regions as well as in the UV Fe II absorption spectra. Finally, we provide diagnostic line ratios and line emissivities for emission spectroscopy as well as column densities for absorption spectroscopy. All atomic data and models are available online and through the AtomPy atomic data curation environment.

For the spectral analysis of spectra of hot stars with a high resolution and high signal-to-noise ratio (S/N), advanced non-local thermodynamic equilibrium (NLTE) model atmospheres are mandatory. These are strongly dependent on the reliability of the atomic data that are used for their calculation. Reliable Xe VI oscillator strengths are used to identify Xe lines in the ultraviolet spectrum of the DO-type white dwarf RE0503-289 and to determine its photospheric Xe abundance. We publish newly calculated oscillator strengths that are based on a recently measured Xe VI laboratory line spectrum. These strengths were used to consider their radiative and collisional bound-bound transitions in detail in our NLTE stellar-atmosphere models to analyze Xe VI lines exhibited in high-resolution and high S/N UV observations of RE0503-289. We identify three hitherto unknown Xe VI lines in the ultraviolet spectrum of RE0503-289 and confirm the previously measured photospheric Xe abundance of this white dwarf (log Xe = -4.2 +/- 0.6). Reliable measurements and calculations of atomic data are prerequisite for stellar-atmosphere modeling. Observed Xe VI line profiles in the ultraviolet spectrum of the white dwarf RE0503-289 were well reproduced with the newly calculated Xe VI oscillator strengths.

For the spectral analysis of high-resolution and high-signal-to-noise (S/N) spectra of hot stars, advanced non-local thermodynamic equilibrium (NLTE) model atmospheres are mandatory. These atmospheres are strongly dependent on the reliability of the atomic data that are used to calculate them. Reliable Ga IV - VI oscillator strengths are used to identify Ga lines in the spectra of the DA-type white dwarf G191-B2B and the DO-type white dwarf RE0503-289 and to determine their photospheric Ga abundances. We newly calculated Ga IV - VI oscillator strengths to consider their radiative and collisional bound-bound transitions in detail in our NLTE stellar-atmosphere models for analyzing of Ga lines exhibited in high-resolution and high-S/N UV observations of G191-B2B and RE0503-289. We unambiguously detected 20 isolated and 6 blended (with lines of other species) Ga V lines in the Far Ultraviolet Spectroscopic Explorer (FUSE) spectrum of RE0503-289. The identification of Ga IV and Ga VI lines is uncertain because they are weak and partly blended by other lines. The determined Ga abundance is 3.5 +/- 0.5 x 10**-5 (mass fraction, about 625 times solar). The Ga IV / GA V ionization equilibrium, which is a very sensitive indicator for the effective temperature, is well reproduced in RE0503-289. We identified the strongest Ga IV lines (1258.801, 1338.129 A) in the HST/STIS (Hubble Space Telescope / Space Telescope Imaging Spectrograph) spectrum of G191-B2B and measured a Ga abundance of 2.0 +/- 0.5 x 10**-6 (about 22 times solar). Reliable measurements and calculations of atomic data are a prerequisite for stellar-atmosphere modeling. Observed Ga IV - V line profiles in two white dwarf (G191-B2B and RE0503-289) ultraviolet spectra were well reproduced with our newly calculated oscillator strengths. For the first time, this allowed us to determine the photospheric Ga abundance in white dwarfs.

For the spectral analysis of high-resolution and high-signal-to-noise (S/N) spectra of hot stars, state-of-the-art non-local thermodynamic equilibrium (NLTE) model atmospheres are mandatory. These are strongly dependent on the reliability of the atomic data that is used for their calculation. Reliable Ba V - VII oscillator strengths are used to identify Ba lines in the spectra of the DA-type white dwarf G191-B2B and the DO-type white dwarf RE0503-289 and to determine their photospheric Ba abundances. We newly calculated Ba V - VII oscillator strengths to consider their radiative and collisional bound-bound transitions in detail in our NLTE stellar-atmosphere models for the analysis of Ba lines exhibited in high-resolution and high-S/N UV observations of G191-B2B and RE0503-289. For the first time, we identified highly ionized Ba in the spectra of hot white dwarfs. We detected Ba VI and Ba VII lines in the Far Ultraviolet Spectroscopic Explorer (FUSE) spectrum of RE0503-289. The Ba VI / Ba VII ionization equilibrium is well reproduced with the previously determined effective temperature of 70000 K and surface gravity of $\log g = 7.5$. The Ba abundance is $3.5 \pm 0.5 \times 10^{-4}$ (mass fraction, about 23000 times the solar value). In the FUSE spectrum of G191-B2B, we identified the strongest Ba VII line (at 993.41 \AA) only, and determined a Ba abundance of $4.0 \pm 0.5 \times 10^{-6}$ (about 265 times solar). Reliable measurements and calculations of atomic data are a pre-requisite for stellar-atmosphere modeling. Observed Ba VI - VII line profiles in two white dwarfs' (G191-B2B and RE0503-289) far-ultraviolet spectra were well reproduced with our newly calculated oscillator strengths. This allowed to determine the photospheric Ba abundance of these two stars precisely.

For the spectral analysis of high-resolution and high-signal-to-noise spectra of hot stars, state-of-the-art non-local thermodynamic equilibrium (NLTE) model-atmospheres are mandatory. These are strongly dependent on the reliability of the atomic data that is used for their calculation. In a recent analysis of the ultraviolet (UV) spectrum of the DA-type white dwarf G191-B2B, 21 Zn IV lines were newly identified. Because of the lack of Zn IV data, transition probabilities of the isoelectronic Ge VI were adapted for a first, coarse determination of the photospheric Zn abundance. We performed new calculations of Zn IV and Zn V oscillator strengths to consider their radiative and collisional bound-bound transitions in detail in our NLTE stellar-atmosphere models for the analysis of the Zn IV - V spectrum exhibited in high-resolution and high-S/N UV observations of G191-B2B and RE0503-289. In the UV spectrum of G191-B2B, we identify 31 Zn IV and 16 Zn V lines. Most of these are identified for the first time in any star. We can reproduce well almost all of them at log Zn = -5.52 +/- 0.2 (mass fraction, about 1.7 times solar). In particular, the Zn IV / Zn V ionization equilibrium, which is a very sensitive indicator for the effective temperature, is well reproduced with the previously determined Teff = 60000 +/- 2000 and log g = 7.60 +/- 0.05. In the spectrum of RE0503-289, we identified 128 Zn V lines for the first time and determined log Zn = -3.57 +/- 0.2 (155 times solar). Reliable measurements and calculations of atomic data are a pre-requisite for stellar-atmosphere modeling. Observed Zn IV and Zn V line profiles in two white dwarf (G191-B2B and RE0503-289) ultraviolet spectra were well reproduced with our newly calculated oscillator strengths. This allowed us to determine the photospheric Zn abundance of these two stars precisely.

Several years ago, M. Asplund and coauthors (2004) proposed a revision of the Solar composition. The use of this new prescription for Solar abundances in standard stellar models generated a strong disagreement between the predictions and the observations of Solar observables. Many claimed that the Standard Solar Model (SSM) was faulty, and more specifically the opacities used in such models. As a result, activities around the stellar opacities were boosted. New experiments (J. Bailey at Sandia on Z-Pinch, The OPAC consortium at LULI200) to measure directly absorbtion coefficients have been realized or are underway. Several theoretical groups (CEA-OPAS, Los Alamos Nat. Lab., CEA-SCORCG, The Opacity Project - The Iron Project (IPOPv2)) have started new sets of calculations using different approaches and codes. While the new results seem to confirm the good quality of the opacities used in SSM, it remains important to improve and complement the data currently available. We present recent results in the case of the photoionization cross sections for Ni XIV (Ni13+ ) from IPOPv2 and possible implications on stellar modelling.

We present detailed analyses of oxygen K absorption in the interstellar medium (ISM) using four high-resolution Chandra spectra towards the X-ray low-mass binary XTE J1817-330. The 11-25 A broadband is described with a simple absorption model that takes into account the pileup effect and results in an estimate of the hydrogen column density. The oxygen K-edge region (21-25 A) is fitted with the physical warmabs model, which is based on a photoionization model grid generated with the xstar code with the most up-to-date atomic database. This approach allows a benchmark of the atomic data which involves wavelength shifts of both the K lines and photoionization cross sections in order to fit the observed spectra accurately. As a result we obtain: a column density of N(H)=1.38+/-0.01\times 10^21 cm^-2; ionization parameter of log(xi)=-2.70+/-0.023; oxygen abundance of A(O)= 0.689^{+0.015}_{-0.010}; and ionization fractions of OI/O = 0.911, OII/O = 0.077, and OIII/O = 0.012 that are in good agreement with previous studies. Since the oxygen abundance in warmabs is given relative to the solar standard of Grevesse et al. (1998), a rescaling with the revision by Asplund et al. (2009) yields A(O)=0.952^{+0.020}_{-0.013}, a value close to solar that reinforces the new standard. We identify several atomic absorption lines Kalpha, Kbeta, and Kgamma in OI and OII; and Kalpha in OIII, OVI, and OVII - last two probably residing in the neighborhood of the source rather than in the ISM. This is the first firm detection of oxygen K resonances with principal quantum numbers n>2 associated to ISM cold absorption.

We present a method for computing uncertainties in spectral models, i.e. level populations, line emissivities, and emission line ratios, based upon the propagation of uncertainties originating from atomic data. We provide analytic expressions, in the form of linear sets of algebraic equations, for the coupled uncertainties among all levels. These equations can be solved efficiently for any set of physical conditions and uncertainties in the atomic data. We illustrate our method applied to spectral models of O III and Fe II and discuss the impact of the uncertainties on atomic systems under different physical conditions. As to intrinsic uncertainties in theoretical atomic data, we propose that these uncertainties can be estimated from the dispersion in the results from various independent calculations. This technique provides excellent results for the uncertainties in A-values of forbidden transitions in [Fe II].

State-of-the-art spectral analysis of hot stars by means of non-LTE model-atmosphere techniques has arrived at a high level of sophistication. The analysis of high-resolution and high-S/N spectra, however, is strongly restricted by the lack of reliable atomic data for highly ionized species from intermediate-mass metals to trans-iron elements. Especially data for the latter has only been sparsely calculated. Many of their lines are identified in spectra of extremely hot, hydrogen-deficient post-AGB stars. A reliable determination of their abundances establishes crucial constraints for AGB nucleosynthesis simulations and, thus, for stellar evolutionary theory. In a previous analysis of the UV spectrum of RE 0503-289, spectral lines of highly ionized Ga, Ge, As, Se, Kr, Mo, Sn, Te, I, and Xe were identified. Individual abundance determinations are hampered by the lack of reliable oscillator strengths. Most of these identified lines stem from Ge V. In addition, we identified Ge VI lines for the first time. We calculated Ge V and Ge VI oscillator strengths to consider their radiative and collisional bound-bound transitions in detail in our non-LTE stellar-atmosphere models for the analysis of the Ge IV - VI spectrum exhibited in high-resolution and high-S/N UV spectra of RE 0503-289. We identify four Ge IV, 37 Ge V, and seven Ge VI lines. Most of these are identified for the first time in any star. We reproduce almost all Ge IV, Ge VI, and Ge VI lines in the observed spectrum of RE 0503-289 (Teff = 70 kK, log g = 7.5) at log Ge = -3.8 +/- 0.3 (mass fraction, about 650 times solar). Reliable measurements and calculations of atomic data are a prerequisite for stellar-atmosphere modeling. Our oscillator-strength calculations have allowed, for the first time, Ge V and Ge VI lines to be successfully reproduced in a white dwarf's spectrum and to determine its photospheric Ge abundance.

We present R-matrix calculations of photoabsorption and photoionization cross sections across the K edge of the Li-like to Ca-like ions stages of Ni. Level-resolved, Breit-Pauli calculations were performed for the Li-like to Na-like stages. Term-resolved calculations, which include the mass-velocity and Darwin relativistic corrections, were performed for the Mg-like to Ca-like ion stages. This data set is extended up to Fe-like Ni using the distorted wave approximation as implemented by AUTOSTRUCTURE. The R-matrix calculations include the effects of radiative and Auger dampings by means of an optical potential. The damping processes affect the absorption resonances converging to the K thresholds causing them to display symmetric profiles of constant width that smear the otherwise sharp edge at the K-shell photoionization threshold. These data are important for the modeling of features found in photoionized plasmas.

We investigate the absorption structure of the oxygen in the interstellar medium by analyzing {\it XMM}-Newton observations of the low mass X-ray binary Sco X-1. We use simple models based on the O {\sc i} atomic cross section from different sources to fit the data and evaluate the impact of the atomic data in the interpretation of astrophysical observations. We show that relatively small differences in the atomic calculations can yield spurious results. We also show that the most complete and accurate set of atomic cross sections successfully reproduce the observed data in the $21-24.5$ {\AA} wavelength region of the spectrum. Our fits indicate that the absorption is mainly due to neutral gas with an ionization parameter of $\xi=10^{-4}$ erg cm s$^{-1}$, and an oxygen column density of $N_{\mathrm{O}}\approx 8-10\times 10^{17}$ cm$^{-2}$. Our models are able to reproduce both the K edge and the K$\alpha$ absorption line from O {\sc i}, which are the two main features in this region. We find no conclusive evidence for absorption by other than atomic oxygen.

We present $R$-matrix calculations of photoabsorption and photoionization cross sections across the K-edge of Mg, Si, S, Ar, and Ca ions with more than 10 electrons. The calculations include the effects of radiative and Auger damping by means of an optical potential. The wave functions are constructed from single-electron orbital bases obtained using a Thomas--Fermi--Dirac statistical model potential. Configuration interaction is considered among all states up to $n=3$. The damping processes affect the resonances converging to the K-thresholds causing them to display symmetric profiles of constant width that smear the otherwise sharp edge at the photoionization threshold. These data are important for modeling of features found in photoionized plasmas.

We present new atomic data (radiative transitions rates and collision strengths) from large scale calculations and a non-LTE spectral model for Fe III. This model is in very good agreement with observed astronomical emission spectra, in contrast with previous models that yield large discrepancies with observations. The present atomic computations employ a combination of atomic physics methods, e.g. relativistic Hatree-Fock, the Thomas-Fermi-Dirac potential, and Dirac-Fock computation of A-values and R-matrix with intermediate coupling frame transformation and Dirac R-matrix. We study the advantages and shortcomings of each method. It is found that the Dirac R-matrix collision strengths yield excellent agreement with observations, much improved over previously available models. By contrast, the transformation of LS-coupling R-matrix fails to yield accurate effective collision strengths at around 10^4 K, despite using very large configuration expansions, due to the limited treatment of spin-orbit effects in the near threshold resonances of the collision strengths. The present work demonstrates that accurate atomic data for low ionization iron-peak species is now within reach.

HD 65949 is a late B star with exceptionally strong Hg II at 3984[A], but it is not a typical HgMn star. The Re II spectrum is of extraordinary strength. Abundances, or upper limits are derived here for 58 elements based on a model with Teff = 13100K, and log(g) = 4.0. Even-Z elements through nickel show minor deviations from solar abundances. Anomalies among the odd-Z elements through copper are mostly small. Beyond the iron peak, a huge scatter is found. The abundance pattern of the heaviest elements resembles the N=126 r-process peak of solar material, though not in detail. We find a significant correlation of the abundance excesses with second ionization potentials for elements with Z > 30. This indicates the relevance of photospheric or near-photospheric processes. We explore a model with mass accretion of exotic material followed by the more commonly accepted differentiation by diffusion. That model leads to a number of predictions which challenge future work. Likely primary and secondary masses are near 3.3 and 1.6 M(solar), with a separation of ca. 0.25 AU. New atomic structure calculations are presented in two appendices.

Aims. This work reports radiative transition rates and electron impact excitation collision strengths for levels of the 3s23p, 3s3p2, 3s24s, and 3s23d configurations of Siii. Methods. The radiative data were computed using the Thomas-Fermi-Dirac-Amaldi central potential, but with the modifications introduced by Bautista (2008) that account for the effects of electron-electron interactions. We also introduce new schemes for the optimization of the variational parameters of the potential. Additional calculations were carried out with the Relativistic Hartree-Fock and the multiconfiguration Dirac-Fock methods. Collision strengths in LS-coupling were calculated in the close coupling approximation with the R-matrix method. Then, fine structure collision strengths were obtained by means of the intermediate-coupling frame transformation (ICFT) method which accounts for spin-orbit coupling effects. Results. We present extensive comparisons between the results of different approximations and with the most recent calculations and experiment available in the literature. From these comparisons we derive a recommended set of gf- values and radiative transition rates with their corresponding estimated uncertainties. We also study the effects of different approximations in the representation of the target ion on the electron-impact collision strengths. Our most accurate set of collision strengths were integrated over a Maxwellian distribution of electron energies and the resulting effective collision strengths are given for a wide range of temperatures. Our results present significant differences from recent calculations with the B-spline non-orthogonal R-matrix method. We discuss the sources of the differences.

Reliable atomic data have been computed for the spectral modeling of the nitrogen K lines, which may lead to useful astrophysical diagnostics. Data sets comprise valence and K-vacancy level energies, wavelengths, Einstein $A$-coefficients, radiative and Auger widths and K-edge photoionization cross sections. An important issue is the lack of measurements which are usually employed to fine-tune calculations so as to attain spectroscopic accuracy. In order to estimate data quality, several atomic structure codes are used and extensive comparisons with previous theoretical data have been carried out. In the calculation of K photoabsorption with the Breit--Pauli $R$-matrix method, both radiation and Auger damping, which cause the smearing of the K edge, are taken into account. This work is part of a wider project to compute atomic data in the X-ray regime to be included in the database of the popular {\sc xstar} modeling code.

The spectrum from the black hole X-ray transient GRO J1655-40. obtained using the $Chandra$ High Energy Transmission Grating (HETG) in 2005 is notable as a laboratory for the study of warm absorbers, and for the presence of many lines from odd-$Z$ elements between Na and Co (and Ti and Cr) not previously observed in X-rays. We present synthetic spectral models which can be used to constrain these element abundances and other parameters describing the outflow from the warm absorber in this object. We present results of fitting to the spectrum using various tools and techniques, including automated line fitting, phenomenological models, and photoionization modeling. We show that the behavior of the curves of growth of lines from H-like and Li-like ions indicate that the lines are either saturated or affected by filling-in from scattered or a partially covered continuum source. We confirm the conclusion of previous work by \cite{Mill06} and \cite{Mill08} which shows that the ionization conditions are not consistent with wind driving due to thermal expansion. The spectrum provides the opportunity to measure abundances for several elements not typically observable in the X-ray band. These show a pattern of enhancement for iron peak elements, and solar or sub-solar values for elements lighter than calcium. Models show that this is consistent with enrichment by a core-collapse supernova. We discuss the implications these values for the evolutionary history of this system.

Radiative and Auger decay data have been calculated for modelling the K lines in ions of the nickel isonuclear sequence, from Ni$^+$ up to Ni$^{27+}$. Level energies, transition wavelengths, radiative transition probabilities, and radiative and Auger widths have been determined using Cowan's Hartree--Fock with Relativistic corrections (HFR) method. Auger widths for the third-row ions (Ni$^+$--Ni$^{10+}$) have been computed using single-configuration average (SCA) compact formulae. Results are compared with data sets computed with the AUTOSTRUCTURE and MCDF atomic structure codes and with available experimental and theoretical values, mainly in highly ionized ions and in the solid state.

The HFR and AUTOSTRUCTURE atomic structure codes are used to compute complete data sets of level energies, wavelengths, A-values, and radiative and Auger widths for K-vacancy states of the Ne, Mg, Si, S, Ar, and Ca isonuclear sequences. Ions with electron number N>9 are treated for the first time. Detailed comparisons with previous measurements and theoretical data for ions with N<=9 are carried out in order to estimate reliable accuracy ratings.

The lines of lithium at 6708 A, and 6103 A, are analyzed in high resolution spectra of some sharp-lined and slowly rotating roAp stars. Three spectral synthesis codes - STARSP, ZEEMAN2 and SYNTHM were used. New lines of the rare earth elements from the DREAM database, and lines calculated on the basis of the NIST energy levels were included. Magnetic splitting and other line broadening processes were taken into account. Enhanced abundances of lithium in the atmospheres of the stars studied are obtained for both the lithium lines. High estimates of 6Li/7Li ratio (0.2 -- 0.5) for the studied star can be explained by Galactic Cosmic Ray (GCR) production through the spallation reactions and the preservation of the original $^6$Li and $^7$Li by the strong magnetic fields.

We carried out a detailed analysis of spectra of the unique roAp star HD 101065 (Przybylski's star) near the resonance doublet Li I 6708 A, using a most complete line list including all possible transitions between REE levels of NIST database. Our model calculations were performed under two assumptions: blend of Li and REE lines, and blend of REE lines only. They prove that Li lines are present in the range 6707.72-6708.02 AA, and that the resulting Li abundance is 3.1 dex (in the scale log N(H) = 12.0, while the isotopic ratio 6Li/7Li is near to 0.3.

In this letter we present an alternative identification for the line detected in the spectra of s-process enriched low-mass post-AGB stars around 6708A and which was interpreted in the literature as due to Li. Newly released line lists of lanthanide species reveal, however, the likely identification of the line to be due to a CeII transition. We argue that this identification is consistent with the Ce abundance of all the objects discussed in the literature and conclude that in none of the low-mass s-process enriched post-AGB stars there is indication for Li-production.