Normalized to: Prentice, A.
[1]
oai:arXiv.org:1901.02850 [pdf] - 1817171
Ultima Thule: a Prediction for the Origin, Bulk Chemical Composition,
and Physical Structure, submitted prior to the New Horizons Spacecraft 100
Pixel LORRI Data Return
Submitted: 2019-01-09, last modified: 2019-01-18
The 2019 January 01 flypast of Ultima Thule by the New Horizons spacecraft
has provided the author with a new opportunity to test his gas ring model of
planetary origin (Prentice, 1978, Moon Planets 19 341). The model proposes that
Ultima Thule condensed from the first gas ring shed by the gravitationally
contracting protosolar cloud. I use the fully quantified gas ring model to
compute the thermal properties of the gas ring in which Ultima condensed and
thence to predict the initial bulk chemical composition of the condensate. It
is predicted that all KBOs initially contained large stores of CO2 ice and CH4
ices. These make up fractions 0.2210 and 0.0513 of the condensate mass,
respectively. Water ice makes up a mass fraction 0.1845, nearly-dry rock has
fraction 0.5269 and graphite has 0.0163. Next, I compute the thermal evolution
of Ultima, taking into account the radiogenic heat released by the decay of
26Al. Stellar occultation data suggest that Ultima Thule may consist of 2 lobes
of radius about 10 km and 7.5 km. The thermal evolution model shows that within
0.2 Myr, the peak internal temperatures are sufficient for a fraction ~0.7 of
the CH4 ice in the larger lobe to melt and for a fraction ~0.4 of the CO2 ice
to sublime. For the smaller lobe, these fractions are less. Liquid CH4 quickly
migrates upwards to the surface and refreezes to form a thick outer shell of
CH4 ice. The sublimation of CO2 takes place after the melting of CH4. The
possibility now exists for rising CO2 vapour to become trapped beneath the CH4
shell. This may lead to explosive eruptions of the outer shell and destruction
of the primordial surface of Ultima and loss of the CO2. If 60% of CO2 is lost,
the lobe radii each shrinks by ~5%. Even so, the intensity of 26Al radiogenic
heating may not be sufficient to render the surface of Ultima Thule globally
smooth, unless the lobe sizes are of order ~15 km.
[2]
oai:arXiv.org:astro-ph/0602512 [pdf] - 80088
Titan at the time of the Cassini spacecraft first flyby: a prediction
for its origin, bulk chemical composition and internal physical structure
Submitted: 2006-02-23
I report the results of a new set of calculations for the gravitational
contraction of the proto-solar cloud to quantify the idea that Titan may be a
captured moon of Saturn (Prentice 1981, 1984). It is proposed that Titan
initially condensed as a secondary embryo in the same proto-solar gas ring from
which the central solid core and gaseous envelope of Saturn were acquired. At
the orbit of Saturn, the bulk chemical constituents of the condensate are rock
(mass fraction 0.494), water ice (0.474), and graphite (0.032). The mean
density is 1523 kg/m^3. Structural models for a frozen Titan yield a mean
density of 2095 kg/m^3 (chemically homogeneous case) and 1904 kg/m^3 (fully
differentiated 2-zone case). The agreement to one percent of the latter value
with the observed mean density suggests that Titan is indeed a fully
differentiated satellite. The value of C/MR^2 for this model is 0.316. It is
predicted that Titan has no internal ocean or induced magnetic field but it may
possess a small native dipole field of magnitude 2 x 10^11 Tesla m^3 due to
thermoremanent magnetization fed by the ancient magnetic field of Saturn.
Capture of Titan was achieved by gas drag at the edge of the proto-Saturnian
envelope at a time when that cloud had a radius close to the present orbital
size of Titan. Collisional drag was also probably an important agent in
securing the capture of Titan. Perhaps Hyperion is the shattered remnant of a
pre-existing native moon of Saturn that was destroyed on the arrival of Titan.
Titan should thus have much the same appearance as Triton, being nearly smooth,
crater-free and streaked with elemental carbon (Prentice 2004a).
[3]
oai:arXiv.org:astro-ph/0512115 [pdf] - 78315
Saturn's Icy Moon Rhea: a Prediction for Bulk Chemical Composition and
Physical Structure at the Time of the Cassini Spacecraft First Flyby
Submitted: 2005-12-05
I report a model for the formation of Saturn's family of mid-sized icy moons
to coincide with the first flypast of Rhea by the Cassini Orbiter spacecraft on
26 November 2005. It is proposed that these moons had condensed from a
concentric family of orbiting gas rings that were cast off some 4600 Myr ago by
the contracting proto-Saturnian cloud. Numerical and structural models for Rhea
are constructed on the basis of a computed bulk chemical mix of hydrated rock
(mass fraction 0.385), H2O ice (0.395), and NH3 ice (0.220). The large
proportion of NH3 in the ice mass inhibits the formation of the dense
crystalline phase II of H2O ice at the satellite's centre. This may explain the
absence of compressional features on the surface. The favoured model of Rhea
has a chemically uniform interior and is very cold. The satellite is nearly
isodense and the predicted value of the axial moment-of-inertia factor is
C/MR^2 = 0.399 +/- 0.004. NH3 is unstable at Saturn's distance from the Sun,
except near the polar regions of the satellite. Perhaps the Cassini Orbiter
will discover indirect evidence for NH3 through the sublimative escape of this
ice from the outer layers, especially near the equatorial zones. Wasting of NH3
would weaken the residual soil, so making the edges of craters soft and prone
to landslides. It will be exciting to learn what Cassini discovers.