Accurate masses and radii for normal stars derived from observations of detached eclipsing binary stars are of fundamental importance for testing stellar models and may be useful for calibrating free parameters in these model if the masses and radii are sufficiently precise and accurate. We aim to measure precise masses and radii for the stars in the bright eclipsing binary AI Phe, and to quantify the level of systematic error in these estimates. We use several different methods to model the TESS light curve of AI Phe combined with spectroscopic orbits from multiple sources to estimate precisely the stellar masses and radii together with robust error estimates. We find that the agreement between different methods for the light curve analysis is very good but some methods underestimate the errors on the model parameters. The semi-amplitudes of the spectroscopic orbits derived from spectra obtained with modern echelle spectrographs are consistent to within 0.1%. The masses of the stars in AI Phe are $M_1 = 1.1938 \pm 0.0008 M_{\odot}$ and $M_2 = 1.2438 \pm 0.0008M_{\odot}$, and the radii are $R_1 = 1.8050 \pm 0.0022 R_{\odot}$ and $R_2 = 2.9332 \pm 0.0023 R_{\odot}$. We conclude that it is possible to measure accurate masses and radii for stars in bright eclipsing binary stars to a precision of 0.2% or better using photometry from TESS and spectroscopy obtained with modern echelle spectrographs. We provide recommendations for publishing masses and radii of eclipsing binary stars at this level of precision.

The Kepler mission has provided a treasure trove of eclipsing binaries (EBs), observed at extremely high photometric precision, nearly continuously for several years. We are carrying out a survey of ~100 of these EBs to derive dynamical masses and radii with precisions of 3% or better. We use multiplexed near-infrared H band spectroscopy from the SDSS-III and -IV APOGEE instrument and optical spectroscopy from the HET High-Resolution Spectrograph to derive double-lined spectroscopic orbits and dynamical mass-ratios for the EB sample. This information is combined with Kepler photometry to derive orbital inclination, dynamical masses of the components, radii and temperatures. These measurements are directly applicable for benchmarking stellar models that are integrating the next generation of improvements, such as the magnetic suppression of convection efficiency, updated opacity tables, and fine-tuned equations of state. We selected our EB sample to include systems with low-mass ($M \lt 0.8 \; M_{\odot}$) primary or secondary components, many expected to populate the relatively sparse parameter space below $0.5 \; M_{\odot}$. In this paper, we describe our EB sample and the analysis techniques we are utilizing, and present masses and radii for two systems that inhabit particularly underpopulated regions of mass-radius-period space: KIC 2445134 and KIC 3003991. Our analysis of KIC 2445134 ($q=0.411 \pm 0.001$) yields masses and radii of $M_A = 1.29 \pm 0.03 \; M_{\odot}$, $M_B = 0.53 \pm 0.01 \; M_{\odot}$, $R_A = 1.42 \pm 0.01 \; R_{\odot}$, $R_B = 0.510 \pm 0.004 \; R_{\odot}$, and a temperature ratio of $T_B/T_A = 0.635 \pm 0.001$; our analysis of KIC 3003991 ($q=0.298 \pm 0.006$) yields $M_A = 0.74 \pm \; 0.04 M_{\odot}$, $M_B = 0.222 \pm \; 0.007 M_{\odot}$, $R_A = 0.84 \pm 0.01 \; R_{\odot}$, $R_B = 0.250 \pm 0.004 \; R_{\odot}$, and a temperature ratio of $T_B/T_A= 0.662 \pm 0.001$.

Massive stars play an important role in the mechanical and chemical evolution of galaxies. Understanding the internal processes of these stars is vital to our understanding of their evolution and eventual end products. Deformations from spherical geometry are common for massive stars; however, the tools that are currently available for the study of these systems are almost exclusively one-dimensional. We present a new spectroscopic analysis tool tailored for massive stars that deviate from spherical symmetry. This code (entitled SPAMMS) is a spectroscopic patch model that takes the three-dimensional surface geometry of the system into account to produce spectral profiles at given phases and orientations. In using the Wilson-Devinney-like code PHOEBE in combination with the non local thermodynamic equilibrium (NLTE) radiative transfer code FASTWIND, we created a three-dimensional mesh that represents the surface geometry of our system and we assigned FASTWIND emergent intensity line profiles to each mesh triangle, which take the local parameters such as temperature, surface gravity, and radius into account. These line profiles were then integrated across the visible surface, where their flux contribution and radial velocity are taken into account, thus returning a final line profile for the visible surface of the system at a given phase. We demonstrate that SPAMMS can accurately reproduce the morphology of observed spectral line profiles for overcontact systems. Additionally, we show how line profiles of rapidly-rotating single stars differ when taking rotational distortion into account, and the effects that these can have on the determined parameters. Finally, we demonstrate the code's ability to reproduce the Rossiter-Mclaughlin and Struve-Sahade effects.

We describe the simulated data sample for the "Photometric LSST Astronomical Time Series Classification Challenge" (PLAsTiCC), a publicly available challenge to classify transient and variable events that will be observed by the Large Synoptic Survey Telescope (LSST), a new facility expected to start in the early 2020s. The challenge was hosted by Kaggle, ran from 2018 September 28 to 2018 December 17, and included 1,094 teams competing for prizes. Here we provide details of the 18 transient and variable source models, which were not revealed until after the challenge, and release the model libraries at https://doi.org/10.5281/zenodo.2612896. We describe the LSST Operations Simulator used to predict realistic observing conditions, and we describe the publicly available SNANA simulation code used to transform the models into observed fluxes and uncertainties in the LSST passbands (ugrizy). Although PLAsTiCC has finished, the publicly available models and simulation tools are being used within the astronomy community to further improve classification, and to study contamination in photometrically identified samples of type Ia supernova used to measure properties of dark energy. Our simulation framework will continue serving as a platform to improve the PLAsTiCC models, and to develop new models.

A general framework for dealing with irradiation effects in the bolometric sense --- specifically, reflection with heat absorption and the consequent redistribution of the absorbed heat, for systems of astrophysical bodies where the boundaries are used as support for the description of the processes, is presented. Discussed are its mathematical and physical properties, as well as its implementation approximations, with a focus on three plausible redistribution processes (uniform, latitudinal, and local redistribution). These are tested by extending PHOEBE 2.1 ( http://phoebe-project.org ), the open-source package for modeling eclipsing binaries, and applied to a toy model of the known two-body eclipsing systems.

Binary systems where the axis of rotation (spin) of one or both components is tilted w.r.t. the axis of revolution are called misaligned binary systems. The angle of misalignment, obliquity, has been measured for a handful of stars and extrasolar planets to date. Here we present a mathematical framework for a complete and rigorous treatment of misalignment and introduce an extension to the public PHOEBE code that implements this framework. We discuss misalignment for the Roche geometry and introduce methods for computing stellar shapes, equilibrium (generalized Lagrange) points of the potential and minimal requirements for lobe existence. Efficient parametrization of misalignment is proposed in the plane-of-sky coordinates and implementation details in PHOEBE are given alongside the proof-of-concept toy model, comparison with a known misaligned binary DI Her, and comparison with a misaligned planetary system Kepler-13. We provide important mathematical details of the model in the Appendix. This paper accompanies the release of PHOEBE 2.1, which will be available soon from its website http://phoebe-project.org.

We highlight the power of the Gaia DR2 in studying many fine structures of the Hertzsprung-Russell diagram (HRD). Gaia allows us to present many different HRDs, depending in particular on stellar population selections. We do not aim here for completeness in terms of types of stars or stellar evolutionary aspects. Instead, we have chosen several illustrative examples. We describe some of the selections that can be made in Gaia DR2 to highlight the main structures of the Gaia HRDs. We select both field and cluster (open and globular) stars, compare the observations with previous classifications and with stellar evolutionary tracks, and we present variations of the Gaia HRD with age, metallicity, and kinematics. Late stages of stellar evolution such as hot subdwarfs, post-AGB stars, planetary nebulae, and white dwarfs are also analysed, as well as low-mass brown dwarf objects. The Gaia HRDs are unprecedented in both precision and coverage of the various Milky Way stellar populations and stellar evolutionary phases. Many fine structures of the HRDs are presented. The clear split of the white dwarf sequence into hydrogen and helium white dwarfs is presented for the first time in an HRD. The relation between kinematics and the HRD is nicely illustrated. Two different populations in a classical kinematic selection of the halo are unambiguously identified in the HRD. Membership and mean parameters for a selected list of open clusters are provided. They allow drawing very detailed cluster sequences, highlighting fine structures, and providing extremely precise empirical isochrones that will lead to more insight in stellar physics. Gaia DR2 demonstrates the potential of combining precise astrometry and photometry for large samples for studies in stellar evolution and stellar population and opens an entire new area for HRD-based studies.

The Gaia Data Release 2 (DR2): we summarise the processing and results of the identification of variable source candidates of RR Lyrae stars, Cepheids, long period variables (LPVs), rotation modulation (BY Dra-type) stars, delta Scuti & SX Phoenicis stars, and short-timescale variables. In this release we aim to provide useful but not necessarily complete samples of candidates. The processed Gaia data consist of the G, BP, and RP photometry during the first 22 months of operations as well as positions and parallaxes. Various methods from classical statistics, data mining and time series analysis were applied and tailored to the specific properties of Gaia data, as well as various visualisation tools. The DR2 variability release contains: 228'904 RR Lyrae stars, 11'438 Cepheids, 151'761 LPVs, 147'535 stars with rotation modulation, 8'882 delta Scuti & SX Phoenicis stars, and 3'018 short-timescale variables. These results are distributed over a classification and various Specific Object Studies (SOS) tables in the Gaia archive, along with the three-band time series and associated statistics for the underlying 550'737 unique sources. We estimate that about half of them are newly identified variables. The variability type completeness varies strongly as function of sky position due to the non-uniform sky coverage and intermediate calibration level of this data. The probabilistic and automated nature of this work implies certain completeness and contamination rates which are quantified so that users can anticipate their effects. This means that even well-known variable sources can be missed or misidentified in the published data. The DR2 variability release only represents a small subset of the processed data. Future releases will include more variable sources and data products; however, DR2 shows the (already) very high quality of the data and great promise for variability studies.

Contact binary stars have been known to have a peculiar and somewhat mysterious hydro- and thermodynamical structure since their discovery, which directly affects the radiation distribution in their atmospheres. Over the past several decades, however, observational data of contact binaries have been modeled through a simplified approach, involving the artificial concatenation of the two components of the contact envelope and populating their respective surfaces with either blackbody atmospheres or plane-parallel model atmospheres of single stars. We show the implications this approach has on the reliability of the system parameter values and propose a method to overcome these issues with a new generalized radiative transfer code, COBAIN (COntact Binary Atmospheres with INterpolation). The basic principles of COBAIN are outlined and their application to different geometries and polytropic stellar structures is discussed. We present initial tests on single non-rotating, uniformly rotating and differentially rotating stars, as well as on simplified polytropic structural models of contact binaries. We briefly discuss the final goal of this ambitious project, which is the computation of model atmosphere tables under the correct assumptions for contact binary stars, to be used in modern binary star analysis codes.

We present the analysis of KIC 8164262, a heartbeat star with a high-amplitude (~1 mmag), tidally resonant pulsation (a mode in resonance with the orbit) at 229 times the orbital frequency and a plethora of tidally induced g-mode pulsations (modes excited by the orbit). The analysis combines Kepler light curves with follow-up spectroscopic data from the Keck telescope, KPNO (Kitt Peak National Observatory) 4-m Mayal telescope and the 2.7-m telescope at the McDonald observatory. We apply the binary modelling software, PHOEBE, to the Kepler light curve and radial velocity data to determine a detailed binary star model that includes the prominent pulsation and Doppler boosting, alongside the usual attributes of a binary star model (including tidal distortion and reflection). The results show that the system contains a slightly evolved F star with an M secondary companion in a highly eccentric orbit (e = 0.886). We use the results of the binary star model in a companion paper (Fuller et al., 2017) where we show that the prominent pulsation can be explained by a tidally excited oscillation mode held near resonance by a resonance locking mechanism.

Parallaxes for 331 classical Cepheids, 31 Type II Cepheids and 364 RR Lyrae stars in common between Gaia and the Hipparcos and Tycho-2 catalogues are published in Gaia Data Release 1 (DR1) as part of the Tycho-Gaia Astrometric Solution (TGAS). In order to test these first parallax measurements of the primary standard candles of the cosmological distance ladder, that involve astrometry collected by Gaia during the initial 14 months of science operation, we compared them with literature estimates and derived new period-luminosity ($PL$), period-Wesenheit ($PW$) relations for classical and Type II Cepheids and infrared $PL$, $PL$-metallicity ($PLZ$) and optical luminosity-metallicity ($M_V$-[Fe/H]) relations for the RR Lyrae stars, with zero points based on TGAS. The new relations were computed using multi-band ($V,I,J,K_{\mathrm{s}},W_{1}$) photometry and spectroscopic metal abundances available in the literature, and applying three alternative approaches: (i) by linear least squares fitting the absolute magnitudes inferred from direct transformation of the TGAS parallaxes, (ii) by adopting astrometric-based luminosities, and (iii) using a Bayesian fitting approach. TGAS parallaxes bring a significant added value to the previous Hipparcos estimates. The relations presented in this paper represent first Gaia-calibrated relations and form a "work-in-progress" milestone report in the wait for Gaia-only parallaxes of which a first solution will become available with Gaia's Data Release 2 (DR2) in 2018.

In this work we quantify the performance of $LSST$ on the detection of eclipsing binaries. We use $Kepler$ observed binaries to create a large sample of simulated pseudo-$LSST$ binary light curves. From these light curves, we attempt to recover the known binary signal. The success rate of period recovery from the pseudo-$LSST$ light curves is indicative of $LSST$'s expected performance. Using an off-the-shelf Analysis of Variance (AoV) routine, we successfully recover 71% of the targets in our sample. We examine how the binary period impacts recovery success and see that for periods longer than 10~days the chance of successful binary recovery drops below 50%.

Context. The first Gaia Data Release contains the Tycho-Gaia Astrometric Solution (TGAS). This is a subset of about 2 million stars for which, besides the position and photometry, the proper motion and parallax are calculated using Hipparcos and Tycho-2 positions in 1991.25 as prior information. Aims. We investigate the scientific potential and limitations of the TGAS component by means of the astrometric data for open clusters. Methods. Mean cluster parallax and proper motion values are derived taking into account the error correlations within the astrometric solutions for individual stars, an estimate of the internal velocity dispersion in the cluster, and, where relevant, the effects of the depth of the cluster along the line of sight. Internal consistency of the TGAS data is assessed. Results. Values given for standard uncertainties are still inaccurate and may lead to unrealistic unit-weight standard deviations of least squares solutions for cluster parameters. Reconstructed mean cluster parallax and proper motion values are generally in very good agreement with earlier Hipparcos-based determination, although the Gaia mean parallax for the Pleiades is a significant exception. We have no current explanation for that discrepancy. Most clusters are observed to extend to nearly 15 pc from the cluster centre, and it will be up to future Gaia releases to establish whether those potential cluster-member stars are still dynamically bound to the clusters. Conclusions. The Gaia DR1 provides the means to examine open clusters far beyond their more easily visible cores, and can provide membership assessments based on proper motions and parallaxes. A combined HR diagram shows the same features as observed before using the Hipparcos data, with clearly increased luminosities for older A and F dwarfs.

Large surveys producing tera- and petabyte-scale databases require machine-learning and knowledge discovery methods to deal with the overwhelming quantity of data and the difficulties of extracting concise, meaningful information with reliable assessment of its uncertainty. This study investigates the potential of a few machine-learning methods for the automated analysis of eclipsing binaries in the data of such surveys. We aim to aid the extraction of samples of eclipsing binaries from such databases and to provide basic information about the objects. We estimate class labels according to two classification systems, one based on the light curve morphology (EA/EB/EW classes) and the other based on the physical characteristics of the binary system (system morphology classes; detached through overcontact systems). Furthermore, we explore low-dimensional surfaces along which the light curves of eclipsing binaries are concentrated, to use in the characterization of the binary systems and in the exploration of biases of the full unknown Gaia data with respect to the training sets. We explore the performance of principal component analysis (PCA), linear discriminant analysis (LDA), random forest classification and self-organizing maps (SOM). We pre-process the photometric time series by combining a double Gaussian profile fit and a smoothing spline, in order to de-noise and interpolate the observed light curves. We achieve further denoising, and selected the most important variability elements from the light curves using PCA. We perform supervised classification using random forest and LDA based on the PC decomposition, while SOM gives a continuous 2-dimensional manifold of the light curves arranged by a few important features. We estimate the uncertainty of the supervised methods due to the specific finite training set using ensembles of models constructed on randomized training sets.

The precision of photometric and spectroscopic observations has been systematically improved in the last decade, mostly thanks to space-borne photometric missions and ground-based spectrographs dedicated to finding exoplanets. The field of eclipsing binary stars strongly benefited from this development. Eclipsing binaries serve as critical tools for determining fundamental stellar properties (masses, radii, temperatures and luminosities), yet the models are not capable of reproducing observed data well either because of the missing physics or because of insufficient precision. This led to a predicament where radiative and dynamical effects, insofar buried in noise, started showing up routinely in the data, but were not accounted for in the models. PHOEBE (PHysics Of Eclipsing BinariEs; http://phoebe-project.org) is an open source modeling code for computing theoretical light and radial velocity curves that addresses both problems by incorporating missing physics and by increasing the computational fidelity. In particular, we discuss triangulation as a superior surface discretization algorithm, meshing of rotating single stars, light time travel effect, advanced phase computation, volume conservation in eccentric orbits, and improved computation of local intensity across the stellar surfaces that includes photon-weighted mode, enhanced limb darkening treatment, better reflection treatment and Doppler boosting. Here we present the concepts on which PHOEBE is built on and proofs of concept that demonstrate the increased model fidelity.

The primary Kepler Mission provided nearly continuous monitoring of ~200,000 objects with unprecedented photometric precision. We present the final catalog of eclipsing binary systems within the 105 square degree Kepler field of view. This release incorporates the full extent of the data from the primary mission (Q0-Q17 Data Release). As a result, new systems have been added, additional false positives have been removed, ephemerides and principal parameters have been recomputed, classifications have been revised to rely on analytical models, and eclipse timing variations have been computed for each system. We identify several classes of systems including those that exhibit tertiary eclipse events, systems that show clear evidence of additional bodies, heartbeat systems, systems with changing eclipse depths, and systems exhibiting only one eclipse event over the duration of the mission. We have updated the period and galactic latitude distribution diagrams and included a catalog completeness evaluation. The total number of identified eclipsing and ellipsoidal binary systems in the Kepler field of view has increased to 2878, 1.3% of all observed Kepler targets. An online version of this catalog with downloadable content and visualization tools is maintained at http://keplerEBs.villanova.edu.

The original {\it Kepler} mission observed and characterized over 2400 eclipsing binaries in addition to its prolific exoplanet detections. Despite the mechanical malfunction and subsequent non-recovery of two reaction wheels used to stabilize the instrument, the {\it Kepler} satellite continues collecting data in its repurposed {\it K2} mission surveying a series of fields along the ecliptic plane. Here we present an analysis of the first full baseline {\it K2} data release: the Campaign 0 data-set. In the 7761 light curves, we have identified a total of 207 eclipsing binaries. Of these, 97 are new discoveries that were not previously identified. Our pixel-level analysis of these objects has also resulted in identification of several false positives (observed targets contaminated by neighboring eclipsing binaries), as well as the serendipitous discovery of two short period exoplanet candidates. We provide catalog cross-matched source identifications, orbital periods, morphologies and ephemerides for these eclipsing systems. We also describe the incorporation of the K2 sample into the Kepler Eclipsing Binary Catalog\footnote{\url{keplerebs.villanova.edu/k2}}, present spectroscopic follow-up observations for a limited selection of nine systems, and discuss prospects for upcoming {\it K2} campaigns.

Over 2500 eclipsing binaries were identified and characterized from the ultra-precise photometric data provided by the Kepler space telescope. Kepler is now beginning its second mission, K2, which is proving to again provide ultra-precise photometry for a large sample of eclipsing binary stars. In the 1951 light curves covering 12 days in the K2 engineering data-set, we have identified and determined the ephemerides for 31 eclipsing binaries that demonstrate the capabilities for eclipsing binary science in the upcoming campaigns in K2. Of those, 20 are new discoveries. We describe both manual and automated approaches to harvesting the complete set of eclipsing binaries in the K2 data, provide identifications and details for the full set of eclipsing binaries present in the engineering data-set, and discuss the prospects for application of eclipsing binary searches in the K2 mission.

The unparalleled photometric data obtained by NASA's Kepler space telescope led to an improved understanding of red giant stars and binary stars. Seismology allows us to constrain the properties of red giants. In addition to eclipsing binaries, eccentric non-eclipsing binaries, exhibiting ellipsoidal modulations, have been detected with Kepler. We aim to study the properties of eccentric binary systems containing a red giant star and derive the parameters of the primary giant component. We apply asteroseismic techniques to determine masses and radii of the primary component of each system. For a selected target, light and radial velocity curve modelling techniques are applied to extract the parameters of the system. The effects of stellar on the binary system are studied. The paper presents the asteroseismic analysis of 18 pulsating red giants in eccentric binary systems, for which masses and radii were constrained. The orbital periods of these systems range from 20 to 440days. From radial velocity measurements we find eccentricities between e=0.2 to 0.76. As a case study we present a detailed analysis of KIC5006817. From seismology we constrain the rotational period of the envelope to be at least 165 d, roughly twice the orbital period. The stellar core rotates 13 times faster than the surface. From the spectrum and radial velocities we expect that the Doppler beaming signal should have a maximum amplitude of 300ppm in the light curve. Through binary modelling, we determine the mass of the secondary component to be 0.29$\pm$0.03\,$M_\odot$. For KIC5006817 we exclude pseudo-synchronous rotation of the red giant with the orbit. The comparison of the results from seismology and modelling of the light curve shows a possible alignment of the rotational and orbital axis at the 2$\sigma$ level. Red giant eccentric systems could be progenitors of cataclysmic variables and hot subdwarf B stars.

Parenago 1802, a member of the ~1 Myr Orion Nebula Cluster, is a double-lined, detached eclipsing binary in a 4.674 d orbit, with equal-mass components (M_2/M_1 = 0.985 \pm 0.029). Here we present extensive VIcJHKs light curves spanning ~15 yr, as well as a Keck/HIRES optical spectrum. The light curves evince a third light source that is variable with a period of 0.73 d, and is also manifested in the high-resolution spectrum, strongly indicating the presence of a third star in the system, probably a rapidly rotating classical T Tauri star. We incorporate this third light into our radial velocity and light curve modeling of the eclipsing pair, measuring accurate masses (M_1 = 0.391 \pm 0.032, M_2 = 0.385 \pm 0.032 M\odot), radii (R_1 = 1.73 \pm 0.02, R_2 = 1.62 \pm 0.02 R\odot), and temperature ratio (T_1/T_2 = 1.0924 \pm 0.0017). Thus the radii of the eclipsing stars differ by 6.9 \pm 0.8%, the temperatures differ by 9.2 \pm 0.2%, and consequently the luminosities differ by 62 \pm 3%, despite having masses equal to within 3%. This could be indicative of an age difference of ~3x10^5 yr between the two eclipsing stars, perhaps a vestige of the binary formation history. We find that the eclipsing pair is in an orbit that has not yet fully circularized, e = 0.0166 \pm 0.003. In addition, we measure the rotation rate of the eclipsing stars to be 4.629 \pm 0.006 d; they rotate slightly faster than their 4.674 d orbit. The non-zero eccentricity and super-synchronous rotation suggest that the eclipsing pair should be tidally interacting, so we calculate the tidal history of the system according to different tidal evolution theories. We find that tidal heating effects can explain the observed luminosity difference of the eclipsing pair, providing an alternative to the previously suggested age difference.

The increasing precision of astronomical observations of stars and stellar systems is gradually getting to a level where the use of slightly different values of the solar mass, radius and luminosity, as well as different values of fundamental physical constants, can lead to measurable systematic differences in the determination of basic physical properties. An equivalent issue with an inconsistent value of the speed of light was resolved by adopting a nominal value that is constant and has no error associated with it. Analogously, we suggest that the systematic error in stellar parameters may be eliminated by: (1) replacing the solar radius Rsun and luminosity Lsun by the nominal values that are by definition exact and expressed in SI units: 1 RnomSun = 6.95508 x 10^8 m and 1 LnomSun = 3.846 x 10^{26} W; (2) computing stellar masses in terms of Msun by noting that the measurement error of the product G.Msun is 5 orders of magnitude smaller than the error in G; (3) computing stellar masses and temperatures in SI units by using the derived values Msun(2010) = 1.988547 x 10^{30} kg and Tsun(2010) = 5779.57 K; and (4) clearly stating the reference for the values of the fundamental physical constants used. We discuss the need and demonstrate the advantages of such a paradigm shift.