Space coronagraphs are projected to detect exoplantes that are at least 1e10 times dimmer than their host stars. Yet, the actual detection threshold depends on the instrument's wavefront stability and varies by an order of magnitude with the choice of observation strategy and post-processing method. In this paper the authors consider the performance of the previously introduced observation strategy (dark hole maintenance) and post-processing algorithm (electric field order reduction) in the presence of various realistic effects. In particular, it will be shown that under some common assumptions, the telescope's averaged pointing jitter translates into an additional light source incoherent with the residual light from the star (speckles), and that jitter "modes" can be identified in post-processing and distinguished from a planet signal. We also show that the decrease in contrast due to drift of voltages in deformable mirror actuators can be mitigated by recursive estimation of the electric field in the high-contrast region of the image (dark hole) using Electric Field Conjugation (EFC). Moreover, this can be done even when the measured intensity is broadband, as long as it is well approximated by an incoherent sum of monochromatic intensities. Finally, we assess the performance of closed-loop vs. open-loop observation scenarios through a numerical simulation of the Wide-Field Infra-Red Survey Telescope (WFIRST). In particular, we compare the post-processing factors of Angular Differential Imaging (ADI) with and without Electric Field Order Reduction (EFOR), which we extended to account for possible telescope rolls and the presence of pointing jitter. For all observation parameters considered in this paper, close-loop dark hole maintenance resulted in significantly higher post-processing accuracy.

In high-contrast space-based coronagraphs, one of the main limiting factors for imaging the dimmest exoplanets is the time varying nature of the residual starlight (speckles). Modern methods try to differentiate between the intensities of starlight and other sources, but none incorporate models of space-based systems which can take into account actuations of the deformable mirrors. Instead, we propose formulating the estimation problem in terms of the electric field while allowing for dithering of the deformable mirrors. Our reduced-order approach is similar to intensity-based PCA (e.g. KLIP) although, under certain assumptions, it requires a considerably lower number of modes of the electric field. We illustrate this by a FALCO simulation of the WFIRST hybrid Lyot coronagraph.

Direct exoplanet imaging via coronagraphy requires maintenance of high contrast in a dark hole for lengthy integration periods. Wavefront errors that change slowly over that time accumulate and cause systematic errors in the star's Point Spread Function (PSF) which limit the achievable signal-to-noise ratio of the planet. In this paper we show that estimating the speckle drift can be achieved via intensity measurements in the dark hole together with dithering of the deformable mirrors to increase phase diversity. A scheme based on an Extended Kalman Filter and Electric Field Conjugation is proposed for maintaining the dark hole during the integration phase. For the post-processing phase, an a posteriori approach is proposed to estimate the realization of the PSF drift process and the intensity of the planet light incoherent with the speckles.