Non-resolved thermal infrared observations enable studies of thermal and physical properties of asteroid surfaces provided the shape and rotational properties of the target are well determined via thermo-physical models. We used calibration-programme Herschel PACS data (70, 100, 160 $\mu$m) and state-of-the-art shape models derived from adaptive-optics observations and/or optical light curves to constrain for the first time the thermal inertia of twelve large main-belt asteroids. We also modelled previously well-characterised targets such as (1) Ceres or (4) Vesta as they constitute important benchmarks. Using the scale as a free parameter, most targets required a re-scaling $\sim$5\% consistent with what would be expected given the absolute calibration error bars. This constitutes a good cross-validation of the scaled shape models, although some targets required larger re-scaling to reproduce the IR data. We obtained low thermal inertias typical of large main belt asteroids studied before, which continues to give support to the notion that these surfaces are covered by fine-grained insulating regolith. Although the wavelengths at which PACS observed are longwards of the emission peak for main-belt asteroids, they proved to be extremely valuable to constrain size and thermal inertia and not too sensitive to surface roughness. Finally, we also propose a graphical approach to help examine how different values of the exponent used for scaling the thermal inertia as a function of heliocentric distance (i.e. temperature) affect our interpretation of the results.

Thanks to the Gaia mission, it will be possible to determine the masses of approximately hundreds of large main belt asteroids with very good precision. We currently have diameter estimates for all of them that can be used to compute their volume and hence their density. However, some of those diameters are still based on simple thermal models, which can occasionally lead to volume uncertainties as high as 20-30%. The aim of this paper is to determine the 3D shape models and compute the volumes for 13 main belt asteroids that were selected from those targets for which Gaia will provide the mass with an accuracy of better than 10%. We used the genetic Shaping Asteroids with Genetic Evolution (SAGE) algorithm to fit disk-integrated, dense photometric lightcurves and obtain detailed asteroid shape models. These models were scaled by fitting them to available stellar occultation and/or thermal infrared observations. We determine the spin and shape models for 13 main belt asteroids using the SAGE algorithm. Occultation fitting enables us to confirm main shape features and the spin state, while thermophysical modeling leads to more precise diameters as well as estimates of thermal inertia values. We calculated the volume of our sample of main-belt asteroids for which the Gaia satellite will provide precise mass determinations. From our volumes, it will then be possible to more accurately compute the bulk density, which is a fundamental physical property needed to understand the formation and evolution processes of small solar system bodies.

With an estimated diameter in the 320 to 350 km range, (704) Interamnia is the fifth largest main belt asteroid and one of the few bodies that fills the gap in size between the four largest bodies with $D$ > 400 km (Ceres, Vesta, Pallas and Hygiea) and the numerous smaller bodies with $D$ $\lesssim$ 200 km. However, despite its large size, little is known about the shape and spin state of Interamnia and, therefore, about its bulk composition and past collisional evolution. We aimed to test at what size and mass the shape of a small body departs from a nearly ellipsoidal equilibrium shape (as observed in the case of the four largest asteroids) to an irregular shape as routinely observed in the case of smaller ($D$ $\lesssim$ 200 km) bodies. We observed Interamnia as part of our ESO VLT/SPHERE large program (ID: 199.C-0074) at thirteen different epochs. In addition, several new optical lightcurves were recorded. These data, along with stellar occultation data from the literature, were fed to the All-Data Asteroid Modeling (ADAM) algorithm to reconstruct the 3D-shape model of Interamnia and to determine its spin state. Interamnia's volume-equivalent diameter of 332 $\pm$ 6 km implies a bulk density of $\rho$=1.98 $\pm$ 0.68 gcm$^{-3}$ , which suggests that Interamnia - like Ceres and Hygiea - contains a high fraction of water ice, consistent with the paucity of apparent craters. Our observations reveal a shape that can be well approximated by an ellipsoid, and that is compatible with a fluid hydrostatic equilibrium at the 2 $\sigma$ level. The rather regular shape of Interamnia implies that the size and mass limit, under which the shapes of minor bodies with a high amount of water ice in the subsurface become irregular, has to be searched among smaller ($D$ $\lesssim$ 300km) less massive ($m$ $\lesssim$ 3x10$^{19}$ kg) bodies.

Asteroid (7) Iris is an ideal target for disk-resolved imaging owing to its brightness (V$\sim$7-8) and large angular size of 0.33 arcsec during its apparitions. Iris is believed to belong to the category of large unfragmented asteroids that avoided internal differentiation, implying that its current shape and topography may record the first few 100 Myr of the solar system's collisional evolution. We recovered information about the shape and surface topography of Iris from disk-resolved VLT/SPHERE/ZIMPOL images acquired in the frame of our ESO large program. We used the All-Data Asteroid Modeling (ADAM) shape reconstruction algorithm to model the 3D shape of Iris, using optical disk-integrated data and disk-resolved images from SPHERE as inputs. We analyzed the SPHERE images to infer the asteroid's global shape and the morphology of its main craters. We present the volume-equivalent diameter D$_{{\rm eq}}$=214$\pm$5 km, and bulk density $\rho$=2.7$\pm$0.3 g cm$^{-3}$ of Iris. Its shape appears to be consistent with that of an oblate spheroid with a large equatorial excavation. We identified eight putative surface features 20--40 km in diameter detected at several epochs, which we interpret as impact craters. Craters on Iris have depth-to-diameter ratios that are similar to those of analogous 10 km craters on Vesta. The bulk density of Iris is consistent with that of its meteoritic analog, namely LL ordinary chondrites. Considering the absence of a collisional family related to Iris and the number of large craters on its surface, we suggest that its equatorial depression may be the remnant of an ancient (at least 3 Gyr) impact. Iris's shape further opens the possibility that large planetesimals formed as almost perfect oblate spheroids. Finally, we attribute the difference in crater morphology between Iris and Vesta to their different surface gravities.

Context. Over the past decades, several interplanetary missions have studied small bodies in situ, leading to major advances in our understanding of their geological and geophysical properties. These missions, however, have had a limited number of targets. Among them, the NASA Dawn mission has characterised in detail the topography and albedo variegation across the surface of asteroid (4) Vesta down to a spatial resolution of approximately 20 m/pixel scale. Aims. Here our aim was to determine how much topographic and albedo information can be retrieved from the ground with VLT/SPHERE in the case of Vesta, having a former space mission (Dawn) providing us with the ground truth that can be used as a benchmark. Methods. We observed Vesta with VLT/SPHERE/ZIMPOL as part of our ESO large programme (ID 199.C-0074) at six different epochs, and deconvolved the collected images with a parametric point spread function (PSF). We then compared our images with synthetic views of Vesta generated from the 3D shape model of the Dawn mission, on which we projected Vesta's albedo information. Results. We show that the deconvolution of the VLT/SPHERE images with a parametric PSF allows the retrieval of the main topographic and albedo features present across the surface of Vesta down to a spatial resolution of approximately 20-30 km. Contour extraction shows an accuracy of approximately 1 pixel (3.6 mas). The present study provides the very first quantitative estimate of the accuracy of ground-based adaptive-optics imaging observations of asteroid surfaces. Conclusions. In the case of Vesta, the upcoming generation of 30-40m telescopes (ELT, TMT, GMT) should in principle be able to resolve all of the main features present across its surface, including the troughs and the north-south crater dichotomy, provided that they operate at the diffraction limit.

Context. CM-like asteroids (Ch and Cgh classes) are a major population within the broader C-complex, encompassing about 10% of the mass of the main asteroid belt. Their internal structure has been predicted to be homogeneous, based on their compositional similarity as inferred from spectroscopy (Vernazza et al., 2016, AJ 152, 154) and numerical modeling of their early thermal evolution (Bland & Travis, 2017, Sci. Adv. 3, e1602514). Aims. Here we aim to test this hypothesis by deriving the density of the CM-like asteroid (41) Daphne from detailed modeling of its shape and the orbit of its small satellite. Methods. We observed Daphne and its satellite within our imaging survey with the Very Large Telescope extreme adaptive-optics SPHERE/ZIMPOL camera (ID 199.C-0074, PI P. Vernazza) and complemented this data set with earlier Keck/NIRC2 and VLT/NACO observations. We analyzed the dynamics of the satellite with our Genoid meta-heuristic algorithm. Combining our high-angular resolution images with optical lightcurves and stellar occultations, we determine the spin period, orientation, and 3-D shape, using our ADAM shape modeling algorithm. Results. The satellite orbits Daphne on an equatorial, quasi-circular, prograde orbit, like the satellites of many other large main-belt asteroids. The shape model of Daphne reveals several large flat areas that could be large impact craters. The mass determined from this orbit combined with the volume computed from the shape model implies a density for Daphne of 1.77+/-0.26 g/cm3 (3 {\sigma}). This density is consistent with a primordial CM-like homogeneous internal structure with some level of macroporosity (~17%). Conclusions. Based on our analysis of the density of Daphne and 75 other Ch/Cgh-type asteroids gathered from the literature, we conclude that the primordial internal structure of the CM parent bodies was homogeneous.

Asteroid (16) Psyche is the target of the NASA Psyche mission. It is considered one of the few main-belt bodies that could be an exposed proto-planetary metallic core and that would thus be related to iron meteorites. Such an association is however challenged by both its near- and mid-infrared spectral properties and the reported estimates of its density. Here, we aim to refine the density of (16) Psyche to set further constraints on its bulk composition and determine its potential meteoritic analog. We observed (16) Psyche with ESO VLT/SPHERE/ZIMPOL as part of our large program (ID 199.C-0074). We used the high angular resolution of these observations to refine Psyche's three-dimensional (3D) shape model and subsequently its density when combined with the most recent mass estimates. In addition, we searched for potential companions around the asteroid. We derived a bulk density of 3.99\,$\pm$\,0.26\,g$\cdot$cm$^{-3}$ for Psyche. While such density is incompatible at the 3-sigma level with any iron meteorites ($\sim$7.8\,g$\cdot$cm$^{-3}$), it appears fully consistent with that of stony-iron meteorites such as mesosiderites (density $\sim$4.25\,$\cdot$cm$^{-3}$). In addition, we found no satellite in our images and set an upper limit on the diameter of any non-detected satellite of 1460\,$\pm$\,200}\,m at 150\,km from Psyche (0.2\%\,$\times$\,R$_{Hill}$, the Hill radius) and 800\,$\pm$\,200\,m at 2,000\,km (3\%\,$\times$\,$R_{Hill}$). Considering that the visible and near-infrared spectral properties of mesosiderites are similar to those of Psyche, there is merit to a long-published initial hypothesis that Psyche could be a plausible candidate parent body for mesosiderites.

In this paper we investigate the possibility of a migration-induced resonance locking in systems containing three planets, namely an Earth analog, a super-Earth and a gas giant. The planets have been listed in order of increasing orbital periods. All three bodies are embedded in a locally isothermal gaseous disc and orbit around a solar mass star. We are interested in answering the following question: Will the low-mass planets form the same resonant structures with each other in the vicinity of the gas giant as in the case when the gas giant is absent? When there is no gas giant in the system, it has been already shown that if the two low-mass planets undergo a convergent differential migration, they will capture each other in a mean-motion resonance. For the choices of disc parameters and planet masses made in this paper, the formation of the 5:4 resonance in the absence of the Jupiter has been observed. In this work we add a gas giant on the most external orbit of the system in such a way that its differential migration is convergent with the low-mass planets. We show that the result of this set-up is the speeding up of the migration of the super-Earth and, after that, all three planets become locked in a triple mean-motion resonance. However, this resonance is not maintained due to the low-mass planet eccentricity excitation, a fact that leads to close encounters between planets and eventually to the ejection from the internal orbits of one or both low-mass planets.

In this paper we consider a new mechanism for stopping the inward migration of a low-mass planet embedded in a gaseous protoplanetary disc. It operates when a low-mass planet (for example a super-Earth), encounters outgoing density waves excited by another source in the disc. This source could be a gas giant in an orbit interior to that of the low-mass planet. As the super-Earth passes through the wave field, angular momentum is transferred to the disc material and then communicated to the planet through coorbital dynamics, with the consequence that its inward migration can be halted or even reversed. We illustrate how the mechanism we consider works in a variety of different physical conditions employing global two-dimensional hydrodynamical calculations. We confirm our results by performing local shearing box simulations in which the super-Earth interacts with density waves excited by an independent harmonically varying potential. Finally, we discuss the constraints arising from the process considered here, on formation scenarios for systems containing a giant planet and lower mass planet in an outer orbit with a 2:1 commensurability such as GJ876.

We investigate how the conditions occurring in a protoplanetary disc may determine the final structure of a planetary system emerging from such a disc. We concentrate our attention on the dynamical interactions between disc and planets leading to orbital migration, which in turn, in favourable circumstances, can drive planets into a mean-motion commensurability. We find that for a system containing a gas giant on the external orbit and a Super-Earth on the internal one, both embedded in a gaseous disc, the 2:1 resonance is a very likely configuration, so one can expect it as an outcome of the early phases of the planetary system formation. Our conclusion is based on an extensive computational survey in which we ask what are the disc properties (the surface density and the viscosity) for which the 2:1 commensurability may be attained. To answer this question we employ a full two-dimensional hydrodynamic treatment of the disc-planet interactions. In general terms, we can claim that the conditions which favour the 2:1 mean-motion resonance exist in the protoplanetary discs with mass accretion rates typical for slowly accreting T Tauri stars. For accretion rates higher than those needed for the 2:1 commensurability we observe a variety of behaviours, among them the passage to the 3:2 resonance, the scattering of the Super-Earth or the divergent migration caused by the outward migration of the gas giant. The results we have obtained from numerical simulations are compared with the predictions coming from the existing analytical expressions of the migration speed and the strength of the mean motion resonances. The conditions that we have found for the attainment of the 2:1 commensurability are discussed in the framework of the properties of protoplanetary discs that are known from the observations.

In recent years we have been witnessing the discovery of one extrasolar gas giant after another. Now the time has come to detect more low-mass planets like Super-Earths and Earth-like objects. An interesting question to ask is: where should we look for them? We have explored here the possibility of finding Super-Earths in the close vicinity of gas giants, as a result of the early evolution of planetary systems. For this purpose, we have considered a young planetary system containing a Super-Earth and a gas giant, both embedded in a protoplanetary disc. We have shown that, if the Super-Earth is on the internal orbit relative to the gas giant, the planets can easily become locked in a mean motion resonance. This is no longer true, however, if the Super-Earth is on the external orbit. In this case we have obtained that the low-mass planet is captured in a trap at the outer edge of the gap opened by the giant planet and no first order mean motion commensurabilities are expected. Our investigations might be particularly useful for the observational TTV (Transit Timing Variation) technique.