The increasing size of solar datasets demands highly efficient and robust analysis methods. This paper presents an approach that can increase the computational efficiency of differential emission measure (DEM) inversions by an order of magnitude or higher, with the efficiency factor increasing with the size of the input dataset. The method, named the Gridded Solar Iterative Temperature Emission Solver (Grid-SITES) is based on grouping pixels according to the similarity of their intensities in multiple channels, and solving for one DEM per group. This is shown to be a valid approach, given a sufficiently high number of grid bins for each channel. The increase in uncertainty arising from the quantisation of the input data is small compared to the general measurement and calibration uncertainties. In this paper, we use the Solar Iterative Temperature Emission Solver (SITES) as the core method for the DEM inversion, although Grid-SITES provides a general framework which may be used with any DEM inversion method, or indeed any large multi-dimensional data inversion problem. The method is particularly efficient for processing larger images, offering a factor of 30 increase in speed for a 10 megapixel image. For a time series of observations, the gridded results can be passed sequentially to each new image, with new populated bins added as required. This process leads to increasing efficiency with each new image, with potential for a $\approx$100 increase in efficiency dependent on the size of the images.

Extreme UltraViolet (EUV) images of the optically-thin solar corona in multiple spectral channels give information on the emission as a function of temperature through differential emission measure (DEM) inversions. The aim of this paper is to describe, test, and apply a new DEM method named the Solar Iterative Temperature Emission Solver (SITES). The method creates an initial DEM estimate through a direct redistribution of observed intensities across temperatures according to the temperature response function of the measurement, and iteratively improves on this estimate through calculation of intensity residuals. It is simple in concept and implementation, is non-subjective in the sense that no prior constraints are placed on the solutions other than positivity and smoothness, and can process a thousand DEMs per second on a standard desktop computer. The resulting DEMs replicate model DEMs well in tests on Atmospheric Imaging Assembly (AIA) synthetic data. The same tests show that SITES performs less well on very narrow DEM peaks, and should not be used for temperature diagnostics below ~0.5MK in the case of AIA observations. The SITES accuracy of inversion compares well with two other established methods. A simple yet powerful new method to visualise DEM maps is introduced, based on a fractional emission measure (FEM). Applied to a set of AIA full-disk images, the SITES method and FEM visualisation show very effectively the dominance of certain temperature regimes in different large-scale coronal structures. The method can easily be adapted for any multi-channel observations of optically-thin plasma and, given its simplicity and efficiency, will facilitate the processing of large existing and future datasets.

We report new experimental Fe I oscillator strengths obtained by combining measurements of branching fractions measured with a Fourier Transform spectrometer and time-resolved laser-induced fluorescence lifetimes. The study covers the spectral region ranging from 213 to 1033 nm. A total of 120 experimental log(gf)-values coming from 15 odd-parity energy levels are provided, 22 of which have not been reported previously and 63 values with lower uncertainty than the existing data. Radiative lifetimes for 60 upper energy levels are presented, 39 of which have no previous measurements.

The lifetimes of 17 even-parity levels (3d5s, 3d4d, 3d6s, and 4p$^2$) in the region 57743-77837 cm$^{-1}$ of singly ionised scandium (\ion{Sc}{ii}) were measured by two-step time-resolved laser induced fluorescence spectroscopy. Oscillator strengths of 57 lines from these highly excited upper levels were derived using a hollow cathode discharge lamp and a Fourier transform spectrometer. In addition, Hartree--Fock calculations where both the main relativistic and core-polarisation effects were taken into account were carried out for both low- and high-excitation levels. There is a good agreement for most of the lines between our calculated branching fractions and the measurements of Lawler and Dakin (1989) in the region 9000-45000 cm$^{-1}$ for low excitation levels and with our measurements for high excitation levels in the region 23500-63100 cm$^{-1}$. This, in turn, allowed us to combine the calculated branching fractions with the available experimental lifetimes to determine semi-empirical oscillator strengths for a set of 380 E1 transitions in \ion{Sc}{ii}. These oscillator strengths include the weak lines that were used previously to derive the solar abundance of scandium. The solar abundance of scandium is now estimated to $\log~\epsilon_\odot = 3.04\pm0.13$ using these semi-empirical oscillator strengths to shift the values determined by Scott et al. (2015). The new estimated abundance value is in agreement with the meteoritic value ($\log~\epsilon_{\text{met}}=3.05\pm0.02$) of Lodders et al. (2009).

High-precision spectroscopy of large stellar samples plays a crucial role for several topical issues in astrophysics. Examples include studying the chemical structure and evolution of the Milky Way galaxy, tracing the origin of chemical elements, and characterizing planetary host stars. Data are accumulating from instruments that obtain high-quality spectra of stars in the ultraviolet, optical and infrared wavelength regions on a routine basis. These instruments are located at ground-based 2- to 10-m class telescopes around the world, in addition to the spectrographs with unique capabilities available at the Hubble Space Telescope. The interpretation of these spectra requires high-quality transition data for numerous species, in particular neutral and singly ionized atoms, and di- or triatomic molecules. We rely heavily on the continuous efforts of laboratory astrophysics groups that produce and improve the relevant experimental and theoretical atomic and molecular data. The compilation of the best available data is facilitated by databases and electronic infrastructures such as the NIST Atomic Spectra Database, the VALD database, or the Virtual Atomic and Molecular Data Centre (VAMDC). We illustrate the current status of atomic data for optical stellar spectra with the example of the Gaia-ESO Public Spectroscopic Survey. Data sources for 35 chemical elements were reviewed in an effort to construct a line list for a homogeneous abundance analysis of up to 100000 stars.

New radiative lifetimes, measured to $\pm$ 5 % accuracy, are reported for 31 even-parity levels of Fe I ranging from 45061 cm$^{-1}$ to 56842 cm$^{-1}$. These lifetimes have been measured using single-step and two-step time-resolved laser-induced fluorescence on a slow atomic beam of iron atoms. Branching fractions have been attempted for all of these levels, and completed for 20 levels. This set of levels represents an extension of the collaborative work reported in Ruffoni et al. (2014). The radiative lifetimes combined with the branching fractions yields new oscillator strengths for 203 lines of Fe I. Utilizing a 1D-LTE model of the solar photosphere, spectral syntheses for a subset of these lines which are unblended in the solar spectrum yields a mean iron abundance of <log[{\epsilon}(Fe)]> = 7.45 $\pm$ 0.06.

The Gaia-ESO Public Spectroscopic Survey (GES) is conducting a large-scale study of multi-element chemical abundances of some 100 000 stars in the Milky Way with the ultimate aim of quantifying the formation history and evolution of young, mature and ancient Galactic populations. However, in preparing for the analysis of GES spectra, it has been noted that atomic oscillator strengths of important Fe I lines required to correctly model stellar line intensities are missing from the atomic database. Here, we present new experimental oscillator strengths derived from branching fractions and level lifetimes, for 142 transitions of Fe I between 3526 {\AA} and 10864 {\AA}, of which at least 38 are urgently needed by GES. We also assess the impact of these new data on solar spectral synthesis and demonstrate that for 36 lines that appear unblended in the Sun, Fe abundance measurements yield a small line-by-line scatter (0.08 dex) with a mean abundance of 7.44 dex in good agreement with recent publications.

We report experimental oscillator strengths for 28 infrared Fe I transitions, for which no previous experimental values exist. These transitions were selected to address an urgent need for oscillator strengths of lines in the H-band (between 1.4 um and 1.7 um) required for the analysis of spectra obtained from the Sloan Digital Sky Survey (SDSS-III) Apache Point Galactic Evolution Experiment (APOGEE). Upper limits have been placed on the oscillator strengths of an additional 7 transitions, predicted to be significant by published semi-empirical calculations, but not observed to be so.

We investigate the statistical equilibrium of Co in the atmospheres of cool stars, and the influence of NLTE and HFS (hyperfine splitting) on the formation of Co lines and abundances. Significant departures from LTE level populations are found for Co I, also number densities of excited states in Co II differ from LTE at low metallicity. The NLTE abundance of Co in solar photosphere is 4.95 +/- 0.04 dex, which is in agreement with that in C I meteorites within the combined uncertainties. The spectral lines of Co I were calculated using the results of recent measurements of hyperfine interaction constants by UV Fourier transform spectrometry. For Co II, the first laboratory measurements of hyperfine structure splitting A and B factors were performed. A differential abundance analysis of Co is carried out for 18 stars in the metallicity range -3.12 < [Fe/H] < 0. The abundances are derived by method of spectrum synthesis. At low [Fe/H], NLTE abundance corrections for Co I lines are as large as +0.6 >... +0.8 dex. Thus, LTE abundances of Co in metal-poor stars are severely underestimated. The stellar NLTE abundances determined from the single UV line of Co II are lower by ~0.5-0.6 dex. The discrepancy might be attributed to possible blends that have not been accounted for in the solar Co II line and its erroneous oscillator strength. The increasing [Co/Fe] trend in metal-poor stars, as calculated from the Co I lines under NLTE, can be explained if Co is overproduced relative to Fe in massive stars. The models of galactic chemical evolution are wholly inadequate to describe this trend suggesting that the problem is in SN yields.

We report experimental oscillator strengths for 88 Ti I transitions covering the wavelength range 465 to 3892 nm, 67 of which had no previous experimental values. Radiative lifetimes for thirteen energy levels, including the low energy levels 3d2 (3F) 4s4p (3P) z5Dj, have been measured using time resolved laser induced fluorescence. Intensity calibrated Ti I spectra have been measured using Fourier transform spectroscopy to determine branching fractions for the decay channels of these levels. The branching fractions are combined with the radiative lifetimes to yield absolute transition probabilities and oscillator strengths. Our measurements include 50 transitions in the previously unobserved infrared region lambda > 1000 nm, a region of particular interest to the analysis of cool stars and brown dwarfs.

We provide a set of atomic lines which are suitable for the description of ultracool dwarf spectra from 10000 to 25000 \AA. This atomic linelist was made using both synthetic spectra calculations and existing atlases of infrared spectra of Arcturus and Sunspot umbra. We present plots, which show the comparison of synthetic spectra and observed Arcturus and Sunspot umbral spectra for all atomic lines likely to be observable in high resolution infrared spectra.