Because of its nicely chromatic behavior, Calcium Fluoride (CaF2) is a nice choice for an optical designer as it can easily solve a number of issues, giving the right extra degree of freedom in the optical design tuning. However, switching from tablet screens to real life, the scarcity of information -and sometimes the bad reputation in term of fragility- about this material makes an overall test much more than a "display determination" experiment. We describe the extensive tests performed in ambient temperature and in thermo-vacuum of a prototype, consistent with flight CTEs, of a 200mm class camera envisaged for the PLATO (PLAnetary Transit and Oscillations of Stars) mission. We show how the CaF2 lens uneventfully succeeded to all the tests and handling procedures, and discuss the main results of the very intensive test campaign of the PLATO Telescope Optical Unit prototype.

We propose to search for biosignatures in the spectra of reflected light from about 100 Earth-sized planets that are already known to be orbiting in their habitable zones (HZ). For a sample of G and K type hosts, most of these planets will be between 25 and 50 milli-arcsec (mas) from their host star and 1 billion to 10 billion times fainter. To separate the planet's image from that of its host star at the wavelength (763nm) of the oxygen biosignature we need a telescope with an aperture of 16 metres. Furthermore, the intensity of the light from the host star at the position in the image of the exoplanet must be suppressed otherwise the exoplanet will be lost in the glare. This presents huge technical challenges. The Earth's atmosphere is turbulent which makes it impossible to achieve the required contrast from the ground at 763nm. The telescope therefore needs to be in space and to fit the telescope in the rocket fairing it must be a factor of 4 or more times smaller when folded than when operational. To obtain spectroscopy of the planet's biosignature at 763nm we need to use an integral field spectrometer (IFS) with a field of view (FOV) of 1000 x 1000 milli-arcsec (mas) and a spectral resolution of 100. This is a device that simultaneously takes many pictures of the exoplanet each at a slightly different wavelength which are then recorded as a data cube with two spatial dimensions and one wavelength dimension. In every data cube wavelength slice, the background light from the host star at the location of the planet image must be minimised. This is achieved via a coronagraph which blocks the light from the host star and active/adaptive optics techniques which continuously maintain very high accuracy optical alignment to make the images as sharp as possible. These are the technical challenges to be addressed in a design study.

We present a study of an impacting descent probe that increases the science return of spacecraft orbiting or passing an atmosphere-less planetary body of the solar system, such as the Galilean moons of Jupiter. The descent probe is a carry-on small spacecraft (< 100 kg), to be deployed by the mother spacecraft, that brings itself onto a collisional trajectory with the targeted planetary body in a simple manner. A possible science payload includes instruments for surface imaging, characterisation of the neutral exosphere, and magnetic field and plasma measurement near the target body down to very low-altitudes (~1 km), during the probe's fast (~km/s) descent to the surface until impact. The science goals and the concept of operation are discussed with particular reference to Europa, including options for flying through water plumes and after-impact retrieval of very-low altitude science data. All in all, it is demonstrated how the descent probe has the potential to provide a high science return to a mission at a low extra level of complexity, engineering effort, and risk. This study builds upon earlier studies for a Callisto Descent Probe (CDP) for the former Europa-Jupiter System Mission (EJSM) of ESA and NASA, and extends them with a detailed assessment of a descent probe designed to be an additional science payload for the NASA Europa Mission.

The Cobra fiber positioner is being developed by the California Institute of Technology (CIT) and the Jet Propulsion Laboratory (JPL) for the Prime Focus Spectrograph (PFS) instrument that will be installed at the Subaru Telescope on Mauna Kea, Hawaii. PFS is a fiber fed multi-object spectrometer that uses an array of Cobra fiber positioners to rapidly reconfigure 2394 optical fibers at the prime focus of the Subaru Telescope that are capable of positioning a fiber to within 5um of a specified target location. A single Cobra fiber positioner measures 7.7mm in diameter and is 115mm tall. The Cobra fiber positioner uses two piezo-electric rotary motors to move a fiber optic anywhere in a 9.5mm diameter patrol area. In preparation for full-scale production of 2550 Cobra positioners an Engineering Model (EM) version was developed, built and tested to validate the design, reduce manufacturing costs, and improve system reliability. The EM leveraged the previously developed prototype versions of the Cobra fiber positioner. The requirements, design, assembly techniques, development testing, design qualification and performance evaluation of EM Cobra fiber positioners are described here. Also discussed is the use of the EM build and test campaign to validate the plans for full-scale production of 2550 Cobra fiber positioners scheduled to begin in late-2014.