The mass of a star is the most fundamental parameter for its structure, evolution, and final fate. It is particularly important for any kind of stellar archaeology and characterization of exoplanets. There exists a variety of methods in astronomy to estimate or determine it. In this review we present a significant number of such methods, beginning with the most direct and model-independent approach using detached eclipsing binaries. We then move to more indirect and model-dependent methods, such as the quite commonly used isochrone or stellar track fitting. The arrival of quantitative asteroseismology has opened a completely new approach to determine stellar masses and to complement and improve the accuracy of other methods. We include methods for different evolutionary stages, from the pre-main sequence to evolved (super)giants and final remnants. For all methods uncertainties and restrictions will be discussed. We provide lists of altogether more than 200 benchmark stars with relative mass accuracies between $[0.3,2]\%$ for the covered mass range of $M\in [0.1,16]\,M_\odot$, $75\%$ of which are stars burning hydrogen in their core and the other $25\%$ covering all other evolved stages. We close with a recommendation how to combine various methods to arrive at a "mass-ladder" for stars.

We provide three statistical model prescriptions for the bolometric corrections appropriate for B-type stars as a function of: 1) T_eff, 2) T_eff, log g, and 3) T_eff, log g, [M/H]. These statistical models have been calculated for 27 different filters, including those of the Gaia space mission, and were derived based on two different grids of bolometric corrections assuming LTE and LTE+NLTE, respectively. Previous such work has mainly been limited to a single photometric passband without taking into account NLTE effects on the bolometric corrections. Using these statistical models, we calculate the luminosities of 34 slowly pulsating B-type (SPB) stars with available spectroscopic parameters, to place them in the Hertzsprung-Russell diagram and compare their position to the theoretical SPB instability strip. We find that excluding NLTE effects has no significant impact on the derived luminosities for the temperature range 11500-21000 K. We conclude that spectroscopic parameters are needed in order to achieve meaningful luminosities of B-type stars. The three prescriptions for the bolometric corrections are valid for any galactic B-type star with effective temperatures and surface gravities in the ranges 10000-30000 K and 2.5-4.5 dex, respectively, covering regimes below the Eddington limit.

(Abridged) Eclipsing, spectroscopic double-lined binary star systems (SB2) are excellent laboratories for calibrating theories of stellar interior structure and evolution. We aim to investigate the mass discrepancy in binary stars. We study the effect of near-core mixing on the mass of the convective core of the stars and interpret the results in the context of the mass discrepancy. Two scenarios are considered, where individual stellar components of a binary system are treated independent of each other and where they are forced to have the same age and initial chemical composition. We find that the mass discrepancy is present in our sample and that it is anti-correlated with the surface gravity of the star. No correlations are found with other fundamental and atmospheric parameters, including the stellar mass. The mass discrepancy can be partially accounted for by increasing the amount of near-core mixing in stellar evolution models. We also find that ignoring the microturbulent velocity and turbulent pressure in stellar atmosphere models of hot evolved stars results in overestimation of their effective temperature by up to 8%. Together with enhanced near-core mixing, this can almost entirely account for the 30% mass discrepancy found for the evolved primary component of V380 Cyg. We find a strong link between the mass discrepancy and the convective core mass. The mass discrepancy can be solved by considering the combined effect of extra near-core boundary mixing and consistent treatment in the spectrum analysis of hot evolved stars. Our binary modelling results in convective core masses between 17 and 35% of the stellar mass, in excellent agreement with results from gravity-mode asteroseismology of single stars. This implies larger helium core masses near the end of the main sequence than anticipated so far.

Extended main-sequence turn-offs (eMSTO) are a commonly observed property of young clusters. A global theoretical interpretation for the eMSTOs is still lacking, but stellar rotation is considered a necessary ingredient to explain the eMSTO. We aim to assess the importance of core-boundary and envelope mixing in stellar interiors for the interpretation of eMSTOs in terms of one coeval population. We construct isochrone-clouds based on interior mixing profiles of stars with a convective core calibrated from asteroseismology of isolated galactic field stars. We fit these isochrone-clouds to the measured eMSTO to estimate the age and core mass of the stars in the two young clusters NGC 1850 and NGC 884, assuming one coeval population and fixing the metallicity to the one measured from spectroscopy. We assess the correlations between the interior mixing properties of the cluster members and their rotational and pulsation properties. We find that stellar models based on asteroseismically-calibrated interior mixing profiles lead to enhanced core masses of eMSTO stars and can explain a good fraction of the observed eMSTOs of the two considered clusters in terms of one coeval population of stars, with similar ages to those in the literature, given the large uncertainties. The rotational and pulsation properties of the stars in NGC 884 are not sufficiently well known to perform asteroseismic modelling, as it is achieved for field stars from space photometry. The stars in NGC 884 for which we have vsini and a few pulsation frequencies show no correlation between these properties and the core masses of the stars that set the cluster age. Future cluster space asteroseismology may allow to interpret the values of the core masses in terms of the physical processes that cause them, based on the modelling of the interior mixing profiles for the individual member stars with suitable identified modes.

Aims: We investigate from a theoretical perspective if space asteroseismology can be used to distinguish between different thermal structures and shapes of the near-core mixing profiles for different types of coherent oscillation modes in massive stars with convective cores, and if this capacity depends on the evolutionary stage of the models along the main sequence. Methods: We compute 1D stellar structure and evolution models for four different prescriptions of the mixing and temperature gradient in the near-core region. Their effect on the frequencies of dipole prograde gravity modes in both Slowly Pulsating B and $\beta$ Cep stars is investigated, as well as for pressure modes in $\beta$ Cep stars. Results: A comparison between the mode frequencies of the different models at various stages during the main sequence evolution reveals that they are more sensitive to a change in temperature gradient than to the exact shape of the mixing profile in the near-core region. Depending on the duration of the observed light curve, one can distinguish between either just the temperature gradient, or also between the shapes of the mixing coefficient. The relative frequency differences are in general larger for more evolved models, and are largest for the higher-frequency pressure modes in $\beta$ Cep stars. Conclusions:In order to unravel the core boundary mixing and thermal structure of the near-core region, one must have asteroseismic masses and radii with $\sim 1\%$ relative precision for hundreds of stars.

We present the discovery of three new $\beta$ Cep pulsators, three new pulsators with frequency groupings, and frequency patterns in a B3Ib star, all of which show pulsations with frequencies as high as about 17 d$^{-1}$, with K2 space mission photometry. Based on a Fourier analysis and iterative pre-whitening we present a classification and evaluate the potential for asteroseismic modelling. We include the lists of pulsation frequencies for three new $\beta$ Cep pulsators, CD-28 12286, CD-27 10876, LS 3978, and additional pulsation mode frequencies for the known $\beta$ Cep pulsator HD 164741. In addition we characterise the regular frequency spacing found in the new pulsator HD 169173, and discuss its origin. We place the newly discovered variables in a colour-magnitude diagram using parallaxes from Gaia-DR2, showcasing their approximate location in the massive star domain. The identified frequency lists of these multiperiodic pulsators are a good starting point for future forward seismic modelling, after identification of at least one pulsation frequency from high-resolution time series spectroscopy and/or multi-colour photometry.

Almost all massive stars explode as supernovae and form a black hole or neutron star. The remnant mass and the impact of the chemical yield on subsequent star formation and galactic evolution strongly depend on the internal physics of the progenitor star, which is currently not well understood. The theoretical uncertainties of stellar interiors accumulate with stellar age, which is particularly pertinent for the blue supergiant phase. Stellar oscillations represent a unique method of probing stellar interiors, yet inference for blue supergiants is hampered by a dearth of observed pulsation modes. Here we report the detection of diverse variability in blue supergiants using the K2 and TESS space missions. The discovery of pulsation modes or an entire spectrum of low-frequency gravity waves in these stars allow us to map the evolution of hot massive stars towards the ends of their lives. Future asteroseismic modelling will provide constraints on ages, core masses, interior mixing, rotation and angular momentum transport. The discovery of variability in blue supergiants is a step towards a data-driven empirical calibration of theoretical evolution models for the most massive stars in the Universe.

We present the first three-dimensional (3D), hydrodynamic simulations of the core convection zone (CZ) and extended radiative zone spanning from 1% to 90% of the stellar radius of an intermediate mass (3 $\mathrm{M}_\odot$) star. This allows us to self-consistently follow the generation of internal gravity waves (IGWs) at the convective boundary and their propagation to the surface. We find that convection in the core is dominated by plumes. The frequency spectrum in the CZ and that of IGW generation is a double power law as seen in previous two-dimensional (2D) simulations. The spectrum is significantly flatter than theoretical predictions using excitation through Reynolds stresses induced by convective eddies alone. It is compatible with excitation through plume penetration. An empirically determined distribution of plume frequencies generally matches the one necessary to explain a large part of the observed spectrum. We observe waves propagating in the radiation zone and excited standing modes, which can be identified as gravity and fundamental modes. They show similar frequencies and node patterns to those predicted by the stellar oscillation code GYRE. The continuous part of the spectrum fulfills the IGW dispersion relation. A spectrum of tangential velocity and temperature fluctuations close to the surface is extracted, which are directly related to observable brightness variations in stars. Unlike 2D simulations we do not see the high frequencies associated with wave breaking, likely because these 3D simulations are more heavily damped.

The evolution of a star is driven by the physical processes in its interior making the theory of stellar structure and evolution the most crucial ingredient for not only stellar evolution studies, but any field of astronomy which relies on the yields along stellar evolution. High-precision time-series photometric data assembled by recent space missions revealed that current models of stellar structure and evolution show major shortcomings already in the two earliest nuclear burning phases, impacting all subsequent phases prior to the formation of the end-of-life remnant. This white paper focuses specifically on the transport of chemical elements and of angular momentum in the stellar structure and evolution models of stars born with convective core, as revealed by their gravity-mode oscillations.

We report an analysis of the first known Beta Cep pulsator observed by the TESS mission, the runaway star PHL 346 = HN Aqr. The star, previously known as a singly-periodic pulsator, has at least 34 oscillation modes excited, 12 of those in the g-mode domain and 22 p modes. Analysis of archival data implies that the amplitude and frequency of the dominant mode and the stellar radial velocity were variable over time. A binary nature would be inconsistent with the inferred ejection velocity from the Galactic disc of 420 km/s, which is too large to be survivable by a runaway binary system. A kinematic analysis of the star results in an age constraint (23 +- 1 Myr) that can be imposed on asteroseismic modelling and that can be used to remove degeneracies in the modelling process. Our attempts to match the excitation of the observed frequency spectrum resulted in pulsation models that were too young. Hence, asteroseismic studies of runaway pulsators can become vital not only in tracing the evolutionary history of such objects, but to understand the interior structure of massive stars in general. TESS is now opening up these stars for detailed asteroseismic investigation.

The asteroseismic modelling of period spacing patterns from gravito-inertial modes in stars with a convective core is a high-dimensional problem. We utilise the measured period spacing pattern of prograde dipole gravity modes (acquiring $\Pi_0$), in combination with the effective temperature ($T_{\rm eff}$) and surface gravity ($\log g$) derived from spectroscopy, to estimate the fundamental stellar parameters and core properties of 37 $\gamma~$Doradus ($\gamma~$Dor) stars whose rotation frequency has been derived from $\textit{Kepler}$ photometry. We make use of two 6D grids of stellar models, one with step core overshooting and one with exponential core overshooting, to evaluate correlations between the three observables $\Pi_0$, $T_{\rm eff}$, and $\log g$ and the mass, age, core overshooting, metallicity, initial hydrogen mass fraction and envelope mixing. We provide multivariate linear model recipes relating the stellar parameters to be estimated to the three observables ($\Pi_0$, $T_{\rm eff}$, $\log g$). We estimate the (core) mass, age, core overshooting and metallicity of $\gamma~$Dor stars from an ensemble analysis and achieve relative uncertainties of $\sim\!10$ per cent for the parameters. The asteroseismic age determination allows us to conclude that efficient angular momentum transport occurs already early on during the main sequence. We find that the nine stars with observed Rossby modes occur across almost the entire main-sequence phase, except close to core-hydrogen exhaustion. Future improvements of our work will come from the inclusion of more types of detected modes per star, larger samples, and modelling of individual mode frequencies.

Space asteroseismology reveals that stellar structure and evolution models of intermediate- and high-mass stars are in need of improvement in terms of angular momentum and chemical element transport. We aim to probe the interior structure of a hot massive star in the core-hydrogen burning phase of its evolution. We analyse CoRoT space photometry, Gaia DR2 space astrometry, and high-resolution high signal-to-noise HERMES and HARPS time-series spectroscopy of the slowly rotating B2V star HD 170580. From the time-series spectroscopy we derive $vsini=4\pm 2\,$km\,s$^{-1}$, where the uncertainty results from the complex pulsational line-profile variability. We detect 42 frequencies with amplitude above 5$\sigma$. Among these we identify 5 rotationally split triplets and 1 quintuplet. Asteroseismic modelling based on CoRoT, Gaia DR2 and spectroscopic data leads to a star of 8M$_\odot$ near core-hydrogen exhaustion and an extended overshoot zone. The detected low-order pressure-mode frequencies cannot be fit within the uncertainties of the CoRoT data by models without atomic diffusion. Irrespective of this limitation, the low-order gravity modes reveal HD 170580 to be a slow rotator with an average rotation period between 73 and 98 d and a hint of small differential rotation. Future Gaia DR3 data taking into account the multiplicity of the star, along with long-term TESS photometry would allow to put better observational constraints on the asteroseismic models of this blue evolved massive star. Improved modelling with atomic diffusion, including radiative levitation, is needed to achieve compliance with the low helium surface abundance of the star. This poses immense computational challenges but is required to derive the interior rotation and mixing profiles of this star.

Uncertainties in stellar structure and evolution theory are largest for stars undergoing core convection on the main sequence. A powerful way to calibrate the free parameters used in the theory of stellar interiors is asteroseismology, which provides direct measurements of angular momentum and element transport. We report the detection and classification of new variable O and B stars using high-precision short-cadence (2-min) photometric observations assembled by the Transiting Exoplanet Survey Satellite (TESS). In our sample of 154 O and B stars, we detect a high percentage (90%) of variability. Among these we find 23 multiperiodic pulsators, 6 eclipsing binaries, 21 rotational variables, and 25 stars with stochastic low-frequency variability. Several additional variables overlap between these categories. Our study of O and B stars not only demonstrates the high data quality achieved by TESS for optimal studies of the variability of the most massive stars in the Universe, but also represents the first step towards the selection and composition of a large sample of O and B pulsators with high potential for joint asteroseismic and spectroscopic modeling of their interior structure with unprecedented precision.

Early-type stars are predicted to excite an entire spectrum of internal gravity waves (IGWs) at the interface of their convective cores and radiative envelopes. Numerical simulations of IGWs predict stochastic low-frequency variability in photometric observations, yet the detection of IGWs in early-type stars has been limited by a dearth of high-quality photometric time series. We present observational evidence of stochastic low-frequency variability in the CoRoT photometry of a sample of O, B, A and F stars. The presence of this stochastic low-frequency variability in stars across the upper main-sequence cannot be universally explained as granulation or stellar winds, but its morphology is found to be consistent with predictions from IGW simulations.

Context. Main sequence stars with a convective core are predicted to stochastically excite Internal Gravity Waves (IGWs), which effectively transport angular momentum throughout the stellar interior and explain the observed near-uniform interior rotation rates of intermediate-mass stars. However, there are few detections of IGWs, and fewer still made using photometry, with more detections needed to constrain numerical simulations. Aims. We aim to formalise the detection and characterisation of IGWs in photometric observations of stars born with convective cores (M > 1.5 M$_{\odot}$) and parameterise the low-frequency power excess caused by IGWs. Methods. Using the most recent CoRoT light curves for a sample of O, B, A and F stars, we parameterise the morphology of the flux contribution of IGWs in Fourier space using an MCMC numerical scheme within a Bayesian framework. We compare this to predictions from IGW numerical simulations and investigate how the observed morphology changes as a function of stellar parameters. Results. We demonstrate that a common morphology for the low-frequency power excess is observed in early-type stars observed by CoRoT. Our study shows that a background frequency-dependent source of astrophysical signal is common, which we interpret as IGWs. We provide constraints on the amplitudes of IGWs and the shape of their detected frequency spectrum across a range of mass, which is the first ensemble study of stochastic variability in such a diverse sample of stars. Conclusions. The evidence of a low-frequency power excess across a wide mass range supports the interpretation of IGWs in photometry of O, B, A and F stars. We also discuss the prospects of observing hundreds of massive stars with the Transiting Exoplanet Survey Satellite (TESS) in the near future.

The simultaneous presence of variability due to both pulsations and binarity is no rare phenomenon. Unfortunately, the complexities of dealing with even one of these sources of variability individually means that the other signal is often treated as a nuisance and discarded. However, both types of variability offer means to probe fundamental stellar properties in robust ways through asteroseismic and binary modelling. We present an efficient methodology that includes both binary and asteroseismic information to estimate fundamental stellar properties based on a grid-based modelling approach. We report parameters for three gravity mode pulsating {\it Kepler} binaries , such as mass, radius, age, as well the mass of the convective core and location of the overshoot region. We discuss the presence of parameter degeneracies and the way our methodology deals with them. We provide asteroseismically calibrated isochrone-clouds to the community; these are a generalisation of isochrones when allowing for different values of the core overshooting in the two components of the binary.

We propose a methodological framework to perform forward asteroseismic modeling of stars with a convective core, based on gravity-mode oscillations. These probe the near-core region in the deep stellar interior. The modeling relies on a set of observed high-precision oscillation frequencies of low-degree coherent gravity modes with long lifetimes and their observational uncertainties. Identification of the mode degree and azimuthal order is assumed to be achieved from rotational splitting and/or from period spacing patterns. This paper has two major outcomes. The first is a comprehensive list and discussion of the major uncertainties of theoretically predicted gravity-mode oscillation frequencies based on linear pulsation theory, caused by fixing choices of the input physics for evolutionary models. Guided by a hierarchy among these uncertainties of theoretical frequencies, we subsequently provide a global methodological scheme to achieve forward asteroseismic modeling. We properly take into account correlations amongst the free parameters included in stellar models. Aside from the stellar mass, metalicity and age, the major parameters to be estimated are the near-core rotation rate, the amount of convective core overshooting, and the level of chemical mixing in the radiative zones. This modeling scheme allows for maximum likelihood estimation of the stellar parameters for fixed input physics of the equilibrium models, followed by stellar model selection considering various choices of the input physics. Our approach uses the Mahalanobis distance instead of the often used $\chi^2$ statistic and includes heteroscedasticity. It provides estimation of the unknown variance of the theoretically predicted oscillation frequencies.

The large-scale magnetic fields detected at the surface of about 10% of hot stars extend into the stellar interior, where they may alter the structure. Deep inner regions of stars are only observable using asteroseismology. Here, we investigated the pulsating magnetic B3.5V star HD43317, inferred its interior properties and assessed whether the dipolar magnetic field with a surface strength of $B_p = 1312 \pm 332$G caused different properties compared to those of non-magnetic stars. We analysed the latest version of the star's 150d CoRoT light curve and extracted 35 significant frequencies, 28 of which were determined to be independent and not related to the known surface rotation period of $P_{\rm rot} = 0.897673$d. We performed forward seismic modelling based on non-magnetic, non-rotating 1D MESA models and the adiabatic module of the pulsation code GYRE, utilizing a grid-based approach. Our aim was to estimate the stellar mass, age, and convective core overshooting. The GYRE calculations were done for uniform rotation with $P_{\rm rot}$. This modelling was able to explain 16 of the 28 frequencies as gravity modes belonging to retrograde modes with $(\ell, m) = (1, -1)$ and $(2, -1)$ period spacing patterns and one distinct prograde $(2,2)$ mode. The modelling resulted in a stellar mass $M_{\star} = 5.8^{+0.1}_{-0.2}$$\mathrm{M_{\odot}}$, a central hydrogen mass fraction $X_c = 0.54^{+0.01}_{-0.02}$, and exponential convective core overshooting parameter $f_{\rm ov} = 0.004^{+0.014}_{-0.002}$. The low value for $f_{\rm ov}$ is compatible with the suppression of near-core mixing due to a magnetic field but the uncertainties are too large to pinpoint such suppression as the sole physical interpretation. $[...]$

The evolution of stars born with a convective core is highly dependent on the efficiency and extent of near core mixing processes, which effectively increases both the core mass and main-sequence lifetime. We investigate to what extent gravity-mode period spacings in slowly pulsating B-type stars observed by the Kepler mission can be used to constrain both the shape and extent of convective core overshoot and additional mixing in the radiative envelope. We compute grids of 1D stellar structure and evolution models for two different shapes of convective core overshooting and three shapes of radiative envelope mixing. The models in these grids are compared to a set of benchmark models to evaluate their capability of mimicking the dipole prograde g-modes of the benchmark models. Through our model comparisons we find that at a central hydrogen content of Xc = 0.5, dipole prograde g-modes in the period range 0.8-3 d are capable of differentiating between step and exponential diffusive overshooting. This ability disappears towards the terminal age main-sequence at Xc = 0.1. Furthermore, the g-modes behave the same for the three different shapes of radiative envelope mixing considered. However, a constant envelope mixing requires a diffusion coefficient near the convective core five times higher than chemical mixing from internal gravity waves to obtain a surface nitrogen excess of about 0.5 dex within the main-sequence lifetime. Within estimated frequency errors of the Kepler mission, the ability of g-modes to distinguish between step and exponential diffusive overshooting depends on the evolutionary stage. Combining information from the average period spacing and observed surface abundances, notably nitrogen, could potentially be used to constrain the shape of mixing in the radiative envelope of massive stars.

Previously [Y/Mg] has been proven to be an age indicator for solar twins. Here, we investigate if this relation also holds for helium-core-burning stars of solar metallicity. High resolution and high signal-to-noise ratio (S/N) spectroscopic data of stars in the helium-core-burning phase have been obtained with the FIES spectrograph on the NOT 2.56m telescope and the HIRES spectrograph on the Keck I 10 m telescope. They have been analyzed to determine the chemical abundances of four open clusters with close to solar metallicity; NGC 6811, NGC 6819, M67 and NGC 188. The abundances are derived from equivalent widths of spectral lines using ATLAS9 model atmospheres with parameters determined from the excitation and ionization balance of Fe lines. Results from asteroseismology and binary studies were used as priors on the atmospheric parameters, where especially the $\log g$ is determined to much higher precision than what is possible with spectroscopy. It is confirmed that the four open clusters are close to solar metallicity and they follow the [Y/Mg] vs. age trend previously found for solar twins. The [Y/Mg] vs. age clock also works for giant stars in the helium-core burning phase, which vastly increases the possibilities to estimate the age of stars not only in the solar neighborhood, but in large parts of the Galaxy, due to the brighter nature of evolved stars compared to dwarfs.

For flares to be generated, stars have to have a sufficiently deep outer convection zone (F5 and later), strong large--scale magnetic fields (Ap/Bp-type stars) or strong, radiatively driven winds (B5 and earlier). Normal A-type stars possess none of these and therefore should not flare. Nevertheless, flares have previously been detected in the Kepler lightcurves of 33 A-type stars and interpreted to be intrinsic to the stars. Here we present new and detailed analyses of these 33 stars, imposing very strict criteria for the flare detection. We confirm the presence of flare-like features in 27 of the 33 A-type stars. A study of the pixel data and the surrounding field-of-view (FOV) reveals that 14 of these 27 flaring objects have overlapping neighbouring stars and 5 stars show clear contamination in the pixel data. We have obtained high-resolution spectra for 2/3 of the entire sample and confirm that our targets are indeed A-type stars. Detailed analyses revealed that 11 out of 19 stars with multiple epochs of observations are spectroscopic binaries. Furthermore, and contrary to previous studies, we find that the flares can originate from a cooler, unresolved companion. We note the presence of H$\alpha$ emission in eight stars. Whether this emission is circumstellar or magnetic in origin is unknown. In summary, we find possible alternative explanations for the observed flares for at least 19 of the 33 A-type stars, but find no truly convincing target to support the hypothesis of flaring A-type stars.

We describe three useful applications of asteroseismology in the context of exoplanet science: (1) the detailed characterisation of exoplanet host stars; (2) the measurement of stellar inclinations; and (3) the determination of orbital eccentricity from transit duration making use of asteroseismic stellar densities. We do so using the example system Kepler-410 (Van Eylen et al. 2014). This is one of the brightest (V = 9.4) Kepler exoplanet host stars, containing a small (2.8 Rearth) transiting planet in a long orbit (17.8 days), and one or more additional non-transiting planets as indicated by transit timing variations. The validation of Kepler-410 (KOI-42) was complicated due to the presence of a companion star, and the planetary nature of the system was confirmed after analyzing a Spitzer transit observation as well as ground-based follow-up observations.

We confirm the Kepler planet candidate Kepler-410b (KOI-42b) as a Neptune sized exoplanet on a 17.8 day, eccentric orbit around the bright (Kp = 9.4) star Kepler-410A. This is the third brightest confirmed planet host star in the Kepler field and one of the brightest hosts of all currently known transiting exoplanets. Kepler-410 consists of a blend between the fast rotating planet host star (Kepler-410A) and a fainter star (Kepler-410B), which has complicated the confirmation of the planetary candidate. Employing asteroseismology, using constraints from the transit light curve, adaptive optics and speckle images, and Spitzer transit observations, we demonstrate that the candidate can only be an exoplanet orbiting Kepler-410A. Via asteroseismology we determine the following stellar and planetary parameters with high precision; M$_\star = 1.214 \pm 0.033$ M$_\odot$, R$_\star = 1.352 \pm 0.010$ R$_\odot$, Age = $2.76 \pm 0.54$ Gyr, planetary radius ($2.838 \pm 0.054$ R$_\oplus$), and orbital eccentricity ($0.17^{+0.07}_{-0.06}$). In addition, rotational splitting of the pulsation modes allows for a measurement of Kepler-410A's inclination and rotation rate. Our measurement of an inclination of $82.5^{+7.5}_{-2.5}$ [$^\circ$] indicates a low obliquity in this system. Transit timing variations indicate the presence of at least one additional (non-transiting) planet in the system.