We present high time-resolution optical energy-resolved photometry of the eclipsing cataclysmic variable V2301 Oph made using the ESA S-Cam detector, an array of photon counting super-conducting tunnel junction (STJ) devices with intrinsic energy resolution. Three eclipses were observed, revealing considerable variation in the eclipse shape, particularly during ingress. The eclipse shape is shown to be understood in terms of AM Her accretion via a bright stream, with very little contribution from the white dwarf photosphere and/or hotspot. About two thirds of the eclipsed light arises in the threading region. Variation in the extent of the threading region can account for most of the variations observed between cycles. Spectral fits to the data reveal a 10,000K blackbody continuum with strong, time-varying emission lines of hydrogen and helium. This is the first time that stellar emission lines have been detected in the optical band using a non-dispersive photon-counting system.

We describe a multi-order spectrograph concept suitable for 8m-class telescopes, using the intrinsic spectral resolution of Superconducting Tunneling Junction detectors to sort the spectral orders. The spectrograph works at low orders, 1-5 or 1-6, and provides spectral coverage with a resolving power of R~8000 from the atmospheric cutoff at 320 nm to the long wavelength end of the infrared H or K band at 1800 nm or 2400 nm. We calculate that the spectrograph would provide substantial throughput and wavelength coverage, together with high time resolution and sufficient dynamic range. The concept uses currently available technology, or technologies with short development horizons, restricting the spatial sampling to two linear arrays; however an upgrade path to provide more spatial sampling is identified. All of the other challenging aspects of the concept - the cryogenics, thermal baffling and magnetic field biasing - are identified as being feasible.

ESA's Superconducting Tunnel Junction (STJ) optical photon-counting camera (S-Cam2) incorporates an array of pixels with intrinsic energy sensitivity. Using the spectral fitting technique common in X-ray astronomy, we fit black bodies to nine stellar spectra, ranging from cool flare stars to hot white dwarfs. The measured temperatures are consistent with literature values at the expected level of accuracy based on the predicted gain stability of the instrument. Having also demonstrated that systematic effects due to count rate are likely to be small, we then proceed to apply the temperature determination method to four cataclysmic variable (CV) binary systems. In three cases we measure the temperature of the accretion stream, while in the fourth we measure the temperature of the white dwarf. The results are discussed in the context of existing CV results. We conclude by outlining the prospects for future versions of S-Cam.

We present high time-resolution photometry of the dwarf nova IY UMa using the S-Cam2 super-conducting tunnel junction device attached to the 4.2m William Herschel Telescope on La Palma. Exploiting the well-defined white dwarf and hot spot eclipse features, we derive an updated orbital ephemeris for IY UMa and an orbital period of 0.07390897(5) days. A white dwarf ingress/egress duration of 31 +/- 2s along with the contact phases of the bright spot gives M_1=0.79 +/- 0.04 M_sun and M_2=0.10 +/- 0.01 Msun, corresponding to a mass ratio of q=0.125 +/- 0.008. The white dwarf eclipse width of 0.0637 then implies i=86.0 +/- 1 degrees. A curious rise with a duration of 30 +/- 2s is observed in the orbital lightcurves during all three observed eclipses. It occurs between the end of white dwarf ingress and hot spot ingress and is blue in colour. We suggest that the source of this light lies in the buried part of the gas stream, resulting in a compact, hot impact cavity.

We apply an eclipse mapping technique to observations of the eclipsing magnetic cataclysmic variable HU Aqr. The observations were made with the S-Cam2 Superconducting Tunnel Junction detector at the WHT in October 2000, providing high signal-to-noise observations with simultaneous spectral and temporal resolution. HU Aqr was in a bright (high accretion) state (V=14.7) and the stream contributes as much to the overall system brightness as the accretion region on the white dwarf. The stream is modelled assuming accretion is occuring onto only one pole of the white dwarf. We find enhanced brightness towards the accretion region from irradiation and interpret enhanced brightness in the threading region, where the ballistic stream is redirected to follow the magnetic field lines of the white dwarf, as magnetic heating from the stream-field interaction, which is consistent with recent theoretical results. Changes in the stream eclipse profile over one orbital period indicate that the magnetic heating process is unstable.

We present observations of 11 quasars, selected in the range z = 2.2-4.1, obtained with ESA's Superconducting Tunnel Junction (STJ) camera on the WHT. Using a single template quasar spectrum, we show that we can determine the redshifts of these objects to about 1%. A follow-up spectroscopic observation of one QSO for which our best-fit redshift (z = 2.976) differs significantly from the tentative literature value (z ~ 2.30) confirms that the latter was incorrect.

Currently operating optical superconducting tunnel junction (STJ) detectors, developed in ESA, can simultaneously measure the wavelength (delta lambda = 50 nm at 500 nm) and arrival time (to within ~5 micros) of individual photons in the range 310-720 nm with an efficiency of ~70%, and with count rates of order 5,000 photons per second per junction. A number of STJ junctions placed in an array format generates four-dimensional data: photon arrival time, energy, and array element (X,Y). Such STJ cameras are ideally suited for, e.g., high time- resolution spectrally-resolved monitoring of variable sources or low-resolution spectroscopy of faint extragalactic objects. The reduction of STJ data involves detector efficiency correction, atmo- spheric extinction correction, sky background subtraction, and, unlike that of data from CCD-based systems, a more complex energy calibration, barycentric arrival time correction, energy range selection, and time binning; these steps are, in many respects, analogous to procedures followed in high-energy astro- physics. This paper discusses these calibration steps in detail using a repre- sentative observation of the cataclysmic variable UZ Fornacis; these data were obtained with ESA's S-Cam2 6x6-pixel device. We furthermore discuss issues re- lated to telescope pointing and guiding, differential atmospheric refraction, and atmosphere-induced image motion and image smearing (`seeing') in the focal plane. We also present a simple and effective recipe for extracting the evolu- tion of atmospheric seeing with time from any science exposure, and discuss a number of caveats in the interpretation of STJ-based time-binned data, such as light curves and hardness ratio plots.

We present high time-resolution optical photometry of the eclipsing binary UZ For using a superconducting tunnel junction (STJ) device, a photon-counting array detector with intrinsic energy resolution. Three eclipses of the $\sim$18 mag 126.5 min orbital binary were observed using a $6\times6$ array of Tantalum STJs at the 4.2-m William Herschel Telescope on La Palma. The detector presently provides individual photon arrival time accuracy to about 5 $\mu$s, and a wavelength resolution of about 60 nm at 500 nm, with each array element capable of counting up to $\sim$5000 photons s$^{-1}$. The data allow us to place accurate constraints on the accretion geometry from our time- and spectrally-resolved monitoring, especially of the eclipse ingress and egress. We find that there are two small accretion regions, located close to the poles of the white dwarf. The positions of these are accurately constrained, and show little movement from eclipse to eclipse, even over a number of years. The colour of the emission from the two regions appears similar, although their X-ray properties are known to be significantly different: we argue that the usual accretion shock may be absent at the non-X-ray emitting region, and instead the flow here interacts directly with the white dwarf surface; alternatively, a special grazing occultation of this region is required. There is no evidence for any quasi-periodic oscillations on time-scales of the order of seconds, consistent with relatively stable cyclotron cooling in each accretion region.

We report the first observations of an astronomical object using a superconducting tunnel junction (STJ) device, a pixel detector with intrinsic energy resolution in the optical wavelength range. The Crab pulsar was observed using a 6 times 6 array of Tantalum STJs at the 4.2-m William Herschel Telescope on La Palma. Each array element provides photon counting capability recording up to ~ 10^3 photons per pix per s with an arrival time accuracy of about 5 microsecond, and providing a wavelength resolution of about 100 nm. We derive a photometrically resolved light curve which, however, shows no significant colour index variations with pulsar phase.

We present a catalog of X-ray sources observed during slew maneuvers by the Medium Energy Detector Array onboard the EXOSAT Observatory. The EXOSAT Medium Energy slew-survey catalog (EXMS) provides a unique record of the 1--8 keV X-ray sky between 1983 and 1986. 98% of the sky was observed, with 85% receiving an exposure of >60 s. 1210 sources were detected. By comparing these source positions with other catalogs, identifications are given for 992 detections (82% of the sample). These identifications consist of 250 distinct objects, including 95 different X-ray binary systems, and 14 different AGN. A further 58 detections have multiple candidates, while 160 detections remain unidentified. Collimator transmission corrected 1-8 keV count rates are given for the identified sources, together with raw count rates for the other detections. The construction of the EXMS and the checks performed to ensure the validity of the derived source properties are discussed. A publically available version of this catalog is maintained on the EXOSAT database and archive system (telnet://xray@exosat.estec.esa.nl).