sort results by

Use logical operators AND, OR, NOT and round brackets to construct complex queries. Whitespace-separated words are treated as ANDed.

Show articles per page in mode

Peñalver, Juan

Normalized to: Peñalver, J.

2 article(s) in total. 54 co-authors, from 1 to 2 common article(s). Median position in authors list is 25,0.

[1]  oai:arXiv.org:2007.02702  [pdf] - 2128532
Detection of the magnetar XTE J1810-197 at 150 and 260 GHz with the NIKA2 Kinetic Inductance Detector camera
Comments: 5 pages, 3 figures, 1 table. Accepted in A&A Letters
Submitted: 2020-07-06
The investigation of pulsars between millimetre and optical wavelengths is challenging due to the faintness of the pulsar signals and the relative low sensitivity of the available facilities compared to 100-m class telescopes operating in the centimetre band. The Kinetic Inductance Detector (KID) technology offers large instantaneous bandwidths and a high sensitivity that can help to substantially increase the ability of existing observatories at short wavelengths to detect pulsars and transient emission. To investigate the feasibility of detecting pulsars with KIDs, we observed the anomalous X-ray pulsar XTE J1810-197 with the New IRAM KIDs Array-2 (NIKA2) camera installed at the IRAM 30-m Telescope in Spain. We detected the pulsations from the pulsar with NIKA2 at its two operating frequency bands, 150 and 260 GHz ($\lambda$=2.0 and 1.15 mm, respectively). This is the first time that a pulsar is detected with a receiver based on KID technology in the millimetre band. In addition, this is the first report of short millimetre emission from XTE J1810-197 after its reactivation in December 2018, and it is the first time that the source is detected at 260 GHz, which gives us new insights into the radio emission process of the star.
[2]  oai:arXiv.org:1910.02038  [pdf] - 2097215
Calibration and Performance of the NIKA2 camera at the IRAM 30-meter Telescope
Comments: 37 pages, accepted for publication in A&A
Submitted: 2019-10-04, last modified: 2020-01-21
NIKA2 is a dual-band millimetric continuum camera of 2900 Kinetic Inductance Detectors (KID), operating at $150$ and $260\,\rm{GHz}$, installed at the IRAM 30-meter telescope. We present the performance assessment of NIKA2 after one year of observation using a dedicated point-source calibration method, referred to as the \emph{baseline} method. Using a large data set acquired between January 2017 and February 2018 that span the whole range of observing elevations and atmospheric conditions encountered at the IRAM 30-m telescope, we test the stability of the performance parameters. We report an instantaneous field of view (FOV) of 6.5' in diameter, filled with an average fraction of $84\%$ and $90\%$ of valid detectors at $150$ and $260\,\rm{GHz}$, respectively. The beam pattern is characterized by a FWHM of $17.6'' \pm 0.1''$ and $11.1''\pm 0.2''$, and a beam efficiency of $77\% \pm 2\%$ and $55\% \pm 3\%$ at $150$ and $260\,\rm{GHz}$, respectively. The rms calibration uncertainties are about $3\%$ at $150\,\rm{GHz}$ and $6\%$ at $260\,\rm{GHz}$. The absolute calibration uncertainties are of $5\%$ and the systematic calibration uncertainties evaluated at the IRAM 30-m reference Winter observing conditions are below $1\%$ in both channels. The noise equivalent flux density (NEFD) at $150$ and $260\,\rm{GHz}$ are of $9 \pm 1\, \rm{mJy}\cdot s^{1/2}$ and $30 \pm 3\, \rm{mJy}\cdot s^{1/2}$. This state-of-the-art performance confers NIKA2 with mapping speeds of $1388 \pm 174$ and $111 \pm 11 \,\rm{arcmin}^2\cdot \rm{mJy}^{-2}\cdot \rm{h}^{-1}$ at $150$ and $260\,\rm{GHz}$. With these unique capabilities of fast dual-band mapping at high (better that 18'') angular resolution, NIKA2 is providing an unprecedented view of the millimetre Universe.