Astrometry is one of the main science case which drives the requirements of the next multiconjugate adaptive optics (MCAO) systems for future extremely large telescopes. The small diffraction limited point-spread function (PSF) and the high Signal-to-Noise Ratio (SNR) of these instruments, promise astrometric precision at the level of micro-arcseconds. However, optical distortions have to be as low as possible to achieve the high demanding astrometry requirements. In addition to static distortions, the opto-mechanical instabilities cause astrometric errors that can be major contributors to the astrometry error budget. The present article describes the analysis, at design level, of the effects of opto-mechanical instabilities when coupled with optical surface irregularities due to the manufacturing process. We analyse the notable example of the Multi-conjugate Adaptive Optics RelaY (MAORY) for the extremely large telescope (ELT). Ray-tracing simulations combined with a Monte Carlo approach are used to estimate the geometrical structure and magnitude of field distortion resulting from the optical design. We consider the effects of distortion on the MCAO correction showing that it is possible achieve the micro-arcseconds astrometric precision once corresponding accuracy is obtained by both optical design and manufacturing. We predict that for single-epoch observations, an astrometric error below 50$\mu$as can be achieved for exposure times up to 2 min, provided about 100 stars are available to remove fifth-order distortions. Such performance could be reproducible for multi-epoch observations despite the time-variable distortion induced by instrument instabilities.

Adaptive optics (AO) instruments for the future extremely large telescopes (ELTs) are characterized by advanced optical systems with diffraction-limited optical quality. Low geometric distortion is also crucial for high accuracy astrometric applications. Optical alignment of such systems is a crucial step of the instrument integration. Due to relative inaccessibility of these giant instruments, automatic alignment methods are also favored to improve the instrument availability after major events, such as extraordinary maintenance. The proposed alignment concept for these systems is described: the notable example which is analyzed here is the case of the multiconjugate AO relay for the future ELT. The results of ray-tracing simulations carried out to validate the method are discussed in detail, covering the error sources, which could degrade the alignment performance.

The optical design of the Multi Conjugate Adaptive Optics Relay for the Extremely Large Telescope experienced many modifications since Phase A conclusion in late 2009. These modifications were due to the evolution of the telescope design, the more and more accurate results of the performance simulations and the variations of the opto-mechanical interfaces with both the telescope and the client instruments. Besides, in light of the optics manufacturing assessment feed-backs, the optical design underwent to a global simplification respect to the former versions. Integration, alignment, accessibility and maintenance issues took also a crucial role in the design tuning during the last phases of its evolution. This paper intends to describe the most important steps in the evolution of the optical design, whose rationale has always been to have a feasible and robust instrument, fulfilling all the requirements and interfaces. Among the wide exploration of possible solutions, all the presented designs are compliant with the high-level scientific requirements, concerning the maximum residual wavefront error and the geometrical distortion at the exit ports. The outcome of this decennial work is the design chosen as baseline at the kick-off of the Phase B in 2016 and subsequently slightly modified, after requests and inputs from alignment and maintenance side.

Astrometry was not a science case of the Gemini Multiconjugate adaptive optics System (GeMS) at its design stage. However, since GeMS has been in regular science operation with the Gemini South Adaptive Optics Imager (GSAOI), their astrometric performances have been deeply analysed. The non-linear component of the distortion map model shows a characteristic pattern which is similarly repeated in each detector of GSAOI. The nature of this pattern was unknown and subjected to different hypotheses. This paper describes the origin of the GeMS distortion pattern as well as its multi-epoch variation. At the end, it is showed a comparison with the current design of the Multiconjugate Adaptive Optics RelaY (MAORY) of the Extremely Large Telescope (ELT).

MICADO is the Multi-AO Imaging Camera for Deep Observations, and it will be one of the first light instruments of the Extremely Large Telescope (ELT). Doing high precision multi-object differential astrometry behind ELT is particularly effective given the increased flux and small diffraction limit. Thanks to its robust design with fixed mirrors and a cryogenic environment, MICADO aims to provide 50 $\mu$as absolute differential astrometry (measure star-to-star distances in absolute $\mu$as units) over a 53" FoV in the range 1.2-2.5 $\mu$m. Tackling high precision astrometry over large FoV requires Multi Conjugate Adaptive Optics (MCAO) and an accurate distortion calibration. The MICADO control scheme relies on the separate calibration of the ELT, MAORY and MICADO systematics and distortions, to ensure the best disentanglement and correction of all the contributions. From a system perspective, we are developing an astrometric error budget supported by optical simulations to assess the impact of the main astrometric errors induced by the telescope and its optical tolerances, the MCAO distortions and the opto-mechanical errors between internal optics of ELT, MAORY and MICADO. The development of an overall astrometric error budget will pave the road to an efficient calibration strategy complementing the design of the MICADO calibration unit. At the focus of this work are a number of opto-mechanical error terms which have particular relevance for MICADO astrometry applications, and interface to the MCAO design.

The new class of large telescopes, as the future ELT, are designed to work with Laser Guide Star (LGS) tuned to a resonance of atmosphere sodium atoms. This wavefront sensing technique presents complex issues for an application to big telescopes due to many reasons mainly linked to the finite distance of the LGS, the launching angle, Tip-tilt indetermination and focus anisoplanatism. The implementation of a laboratory Prototype for LGS wavefront sensor (WFS) at the beginning of the phase study of MAORY, the Multi-conjugate Adaptive Optics RelaY for the ELT first light, has been indispensable to investigate specific mitigation strategies to the LGS WFS issues. This paper shows the test results of LGS WFS Prototype under different working conditions. The accuracy within which the LGS images are generated on the Shack-Hartmann (SH) WFS has been cross-checked with the MAORY simulation code. The experiments show the effect of noise on the centroiding precision, the impact of LGS image truncation on the wavefront sensing accuracy as well as the temporal evolution of sodium density profile and LGS image under-sampling.

The Multiconjugate Adaptive Optics RelaY (MAORY) is and Adaptive Optics module to be mounted on the ESO European-Extremely Large Telescope (E-ELT). It is a hybrid Natural and Laser Guide System that will perform the correction of the atmospheric turbulence volume above the telescope feeding the Multi-AO Imaging Camera for Deep Observations Near Infrared spectro-imager (MICADO). We developed an end-to-end Monte- Carlo adaptive optics simulation tool to investigate the performance of a the MAORY and the calibration, acquisition, operation strategies. MAORY will implement Multiconjugate Adaptive Optics combining Laser Guide Stars (LGS) and Natural Guide Stars (NGS) measurements. The simulation tool implements the various aspect of the MAORY in an end to end fashion. The code has been developed using IDL and uses libraries in C++ and CUDA for efficiency improvements. Here we recall the code architecture, we describe the modeled instrument components and the control strategies implemented in the code.