sort results by

Use logical operators AND, OR, NOT and round brackets to construct complex queries. Whitespace-separated words are treated as ANDed.

Show articles per page in mode

Palmeirim, Pedro M.

Normalized to: Palmeirim, P.

35 article(s) in total. 201 co-authors, from 1 to 23 common article(s). Median position in authors list is 6,0.

[1]  oai:arXiv.org:2006.05155  [pdf] - 2112082
The accretion history of high-mass stars: An ArT\'eMiS pilot study of Infrared Dark Clouds
Comments: 23 pages, 44 figures, accepted for publication in MNRAS
Submitted: 2020-06-09
The mass growth of protostars is a central element to the determination of fundamental stellar population properties such as the initial mass function. Constraining the accretion history of individual protostars is therefore an important aspect of star formation research. The goal of the study presented here is to determine whether high-mass (proto)stars gain their mass from a compact (<0.1pc) fixed-mass reservoir of gas, often referred to as dense cores, in which they are embedded, or whether the mass growth of high-mass stars is governed by the dynamical evolution of the parsec-scale clump that typically surrounds them. To achieve this goal, we performed a 350micron continuum mapping of 11 infrared dark clouds, along side some of their neighbouring clumps, with the ArT\'eMiS camera on APEX. By identifying about 200 compact ArT\'eMiS sources, and matching them with Herschel Hi-GAL 70micron sources, we have been able to produce mass vs. temperature diagrams. We compare the nature (i.e. starless or protostellar) and location of the ArT\'eMiS sources in these diagrams with modelled evolutionary tracks of both core-fed and clump-fed accretion scenarios. We argue that the latter provide a better agreement with the observed distribution of high-mass star-forming cores. However, a robust and definitive conclusion on the question of the accretion history of high-mass stars requires larger number statistics.
[2]  oai:arXiv.org:2001.10004  [pdf] - 2124606
Angular momentum profiles of Class 0 protostellar envelopes
Comments: 62 pages, 66 figures
Submitted: 2020-01-27, last modified: 2020-05-28
[abridged] Understanding how the infalling gas redistribute most of its initial angular momentum inherited from prestellar cores before reaching the stellar embryo is a key question. Disk formation has been naturally considered as a possible solution to this "angular momentum problem". However, how the initial angular momentum of protostellar cores is distributed and evolves during the main accretion phase and the beginning of disk formation has largely remained unconstrained up to now. In the framework of the IRAM CALYPSO survey, we used high dynamic range C$^{18}$O (2-1) and N$_2$H$^+$ (1-0) observations to quantify the distribution of specific angular momentum along the equatorial axis in a sample of 12 Class 0 protostellar envelopes from scales ~50 to 10000 au. The radial distributions of specific angular momentum in the CALYPSO sample suggest two distinct regimes within protostellar envelopes: the specific angular momentum decreases as $j \propto r^{1.6 \pm 0.2}$ down to ~1600 au and then tends to become relatively constant around 6 $\times$ 10$^{-4}$ km s$^{-1}$ pc down to ~50 au. The values of specific angular momentum measured in the inner Class 0 envelopes, namely that of the material directly involved in the star formation process ($<$1600 au), is on the same order of magnitude as what is inferred in small T-Tauri disks. Thus, disk formation appears to be a direct consequence of angular momentum conservation during the collapse. Our analysis reveals a dispersion of the directions of velocity gradients at envelope scales $>$1600 au, suggesting that they may not be related to rotational motions of the envelopes. We conclude that the specific angular momentum observed at these scales could find its origin in core-forming motions (infall, turbulence) or trace an imprint of the initial conditions for the formation of protostellar cores.
[3]  oai:arXiv.org:2004.05604  [pdf] - 2124731
The role of Galactic HII regions in the formation of filaments. High-resolution submilimeter imaging of RCW 120 with ArT\'eMiS
Comments: 8 pages, 8 figures, accepted by A&A
Submitted: 2020-04-12
Massive stars and their associated ionized (HII) regions could play a key role in the formation and evolution of filaments that host star formation. However, the properties of filaments that interact with H regions are still poorly known. To investigate the impact of HII regions on the formation of filaments, we imaged the Galactic HII region RCW 120 and its surroundings where active star formation takes place and where the role of ionization feedback on the star formation process has already been studied. We used the ArT\'eMiS camera on the APEX telescope and combined the ArT\'eMiS data at 350 and 450 microns with Herschel-SPIRE/HOBYS. We studied the dense gas distribution around RCW 120 with a resolution of 8 arcsec (0.05 pc at a distance of 1.34 kpc). Our study allows us to trace the median radial intensity profile of the dense shell of RCW 120. This profile is asymmetric, indicating a clear compression from the HII region on the inner part of the shell. The profile is observed to be similarly asymmetric on both lateral sides of the shell, indicating a homogeneous compression over the surface. On the contrary, the profile analysis of a radial filament associated with the shell, but located outside of it, reveals a symmetric profile, suggesting that the compression from the ionized region is limited to the dense shell. The mean intensity profile of the internal part of the shell is well fitted by a Plummer like profile with a deconvolved Gaussian FWHM of 0.09 pc, as observed for filaments in low-mass star-forming regions. This study suggests that compression exerted by HII regions may play a key role in the formation of filaments and may further act on their hosted star formation. ArT\'eMiS data also suggest that RCW 120 might be a 3D ring, rather than a spherical structure
[4]  oai:arXiv.org:2001.11036  [pdf] - 2124607
The Herschel view of the dense core population in the Ophiuchus molecular cloud
Comments: Accepted for publication in A&A
Submitted: 2020-01-29
Herschel observations of nearby clouds in the Gould Belt support a paradigm for low-mass star formation, starting with the generation of molecular filaments, followed by filament fragmentation, and the concentration of mass into self-gravitating prestellar cores. With the unique far-infrared and submillimeter continuum imaging capabilities of the Herschel Space observatory, the closeby (d = 139 pc) Ophiuchus cloud was mapped at five wavelengths from 70 ${\mu}m$ to 500 ${\mu}m$ with the aim of providing a complete census of dense cores in this region, including unbound starless cores, bound prestellar cores, and protostellar cores. Taking advantage of the high dynamic range and multi-wavelength nature of the Herschel data, we used the multi-scale decomposition algorithms getsources and getfilaments to identify a complete sample of dense cores and filaments in the cloud and study their properties. The densest clouds of the Ophiuchus complex, L1688 and L1689, which thus far are only indirectly described as filamentary regions owing to the spatial distribution of their young stellar objects (YSOs), are confirmed to be dominated by filamentary structures. The tight correlation observed between prestellar cores and filamentary structures in L1688 and L1689 supports the view that solar-type star formation occurs primarily in dense filaments. While the sub clouds of the complex show disparities, L1689 being less efficient than L1688 at forming stars when considering their total mass budgets, both sub clouds share almost the same prestellar core formation efficiency in dense molecular gas. We also find evidence in the Herschel data for a remarkable concentric geometrical configuration in L1688 which is dominated by up to three arc-like compression fronts and presumably created by shockwave events emanating from the Sco OB2 association, including the neighboring massive (O9V) star ${\sigma}$ Sco.
[5]  oai:arXiv.org:1912.04020  [pdf] - 2050288
The Hi-GAL catalogue of dusty filamentary structures in the Galactic Plane
Comments: 38 pages, 29 figures, 3 appendices
Submitted: 2019-12-09
The recent data collected by {\it Herschel} have confirmed that interstellar structures with filamentary shape are ubiquitously present in the Milky Way. Filaments are thought to be formed by several physical mechanisms acting from the large Galactic scales down to the sub-pc fractions of molecular clouds, and they might represent a possible link between star formation and the large-scale structure of the Galaxy. In order to study this potential link, a statistically significant sample of filaments spread throughout the Galaxy is required. In this work we present the first catalogue of $32,059$ candidate filaments automatically identified in the Hi-GAL survey of the entire Galactic Plane. For these objects we determined morphological (length, $l^{a}$, and geometrical shape) and physical (average column density, $N_{\rm H_{2}}$, and average temperature, $T$) properties. We identified filaments with a wide range of properties: 2$'$\,$\leq l^{a}\leq$\, 100$'$, $10^{20} \leq N_{\rm H_{2}} \leq 10^{23}$\,cm$^{-2}$ and $10 \leq T\leq$ 35\,K. We discuss their association with the Hi-GAL compact sources, finding that the most tenuous (and stable) structures do not host any major condensation and we also assign a distance to $\sim 18,400$ filaments for which we determine mass, physical size, stability conditions and Galactic distribution. When compared to the spiral arms structure, we find no significant difference between the physical properties of on-arm and inter-arm filaments. We compared our sample with previous studies, finding that our Hi-GAL filament catalogue represents a significant extension in terms of Galactic coverage and sensitivity. This catalogue represents an unique and important tool for future studies devoted to understanding the filament life-cycle.
[6]  oai:arXiv.org:1910.02622  [pdf] - 2011943
Probing fragmentation and velocity sub-structure in the massive NGC 6334 filament with ALMA
Comments: 21 pages, 18 figures, accepted for publication in A&A
Submitted: 2019-10-07, last modified: 2019-11-10
Herschel surveys of Galactic clouds support a paradigm for low-mass star formation in which dense filaments play a crucial role. The detailed fragmentation properties of star-forming filaments remain poorly understood, however, and the validity of the filament paradigm in the high-mass regime is still unclear. To investigate the density/velocity structure of the filament in the high-mass star-forming region NGC6334, we conducted ALMA observations in the 3mm continuum and the N2H+(1-0) line at ~3arcsec resolution. The filament was detected in both tracers. We identified 26 cores at 3mm and 5 velocity-coherent fiber-like features in N2H+ within the filament. The typical length of, and velocity difference between, the fiber-like features of the NGC6334 filament are reminiscent of the properties for the fibers of the low-mass star-forming filament B211/B213. Only 2 or 3 of the 5 velocity-coherent features are well aligned with the filament and may represent genuine, fiber sub-structures. The core mass distribution has a peak at ~10Msun. They can be divided into 7 groups of cores, closely associated with ArTeMiS clumps. The projected separation between cores and the projected spacing between clumps are roughly consistent with the effective Jeans length in the filament and a physical scale of about 4 times the filament width, respectively, suggesting a bimodal filament fragmentation process. Despite being one order of magnitude denser and more massive than the B211/B213 filament, the NGC6334 filament has a similar density/velocity structure. The difference is that the cores in NGC6334 appear to be an order of magnitude denser and more massive than the cores in Taurus. This suggests that dense filaments may evolve and fragment in a similar manner in low- and high-mass star-forming regions, and that the filament paradigm may hold in the intermediate-mass (if not high-mass) star formation regime.
[7]  oai:arXiv.org:1907.13448  [pdf] - 1949411
The role of molecular filaments in the origin of the prestellar core mass function and stellar initial mass function
Comments: 9 pages, 9 figures. Accepted for publication in Astronomy and Astrophysics Letters
Submitted: 2019-07-31
The origin of the stellar initial mass function (IMF) is one of the most debated issues in astrophysics. Here, we explore the possible link between the quasi-universal filamentary structure of star-forming molecular clouds and the origin of the IMF. Based on our recent comprehensive study of filament properties from Herschel Gould Belt survey observations (Arzoumanian et al.), we derive, for the first time, a good estimate of the filament mass function (FMF) and filament line mass function (FLMF) in nearby molecular clouds. We use the observed FLMF to propose a simple toy model for the origin of the prestellar core mass function (CMF), relying on gravitational fragmentation of thermally supercritical but virialized filaments. We find that the FMF and the FLMF have very similar shapes and are both consistent with a Salpeter-like power-law function (d$N$/dlog$M_{\rm line} \propto M_{\rm line}^{-1.5\pm0.1}$) in the regime of thermally supercritical filaments ($M_{\rm line} > 16\, M_\odot$/pc). This is a remarkable result since, in contrast, the mass distribution of molecular clouds and clumps is known to be significantly shallower than the Salpeter power-law IMF, with d$N$/dlog$M_{\rm cl} \propto M_{\rm cl}^{-0.7}$. Since the vast majority of prestellar cores appear to form in thermally transcritical or supercritical filaments, we suggest that the prestellar CMF and by extension the stellar IMF are at least partly inherited from the FLMF through gravitational fragmentation of individual filaments.
[8]  oai:arXiv.org:1903.12608  [pdf] - 1901867
How the power spectrum of dust continuum images may hide the presence of a characteristic filament width
Comments: 14 pages, 18 figures. Accepted for publication in Astronomy and Astrophysics
Submitted: 2019-03-29
Herschel observations of interstellar clouds support a paradigm for star formation in which filaments play a central role. One of the foundations of this paradigm is the finding, based on studies of the radial column density profiles, that nearby filaments share a common inner width of ~0.1 pc. The existence of a characteristic filament width has been questioned, however, as it seems inconsistent with the scale-free nature of the power spectrum of cloud images. In an effort to clarify the origin of this apparent discrepancy, we examined the power spectra of the Herschel 250 micron images of the Polaris, Aquila, and Taurus clouds and performed a number of simple numerical experiments by injecting synthetic filaments in both the Herschel images and synthetic background images. We constructed several populations of synthetic filaments of 0.1 pc width with realistic area filling factors ($A_{\rm fil}$) and distributions of column density contrasts ($\delta_c$). After adding synthetic filaments to the Herschel images, we re-computed the image power spectra and compared the results with the original, essentially scale-free power spectra. We used the $\chi^2$ variance of the residuals between the best power-law fit and the output power spectrum as a diagnostic of the presence of a significant departure from a scale-free power spectrum. We found that the $\chi^2$ variance depends primarily on the combined parameter $\delta_c^2\, A_{\rm fil}$. Analysis of the real Herschel data shows that the observed filamentary structure contributes only 1/5 of the power in the power spectra at angular frequencies where an effect of the characteristic filament width is expected. We conclude that the scale-free power spectra of Herschel images remain consistent with the existence of a characteristic filament width ~0.1 pc and do not invalidate the conclusions drawn from studies of the filament profiles.
[9]  oai:arXiv.org:1811.06240  [pdf] - 1838241
Probing accretion of ambient cloud material into the Taurus B211/B213 filament
Comments: 16 pages, 17 figures, accepted in A&A
Submitted: 2018-11-15
Herschel observations have emphasized the role of molecular filaments in star formation. However, the origin and evolution of these filaments are not yet well understood, partly because of the lack of kinematic information. To examine whether the B211/B213 filament is accreting background gas due to its gravitational potential, we produced a toy accretion model and compared its predictions to the 12CO(1--0) and 13CO(1--0) velocity patterns. We also examined the spatial distributions of Halpha, 857 GHz continuum, and HI emission to search for evidence of large-scale external effects. We estimated the depth of the cloud around the B211/B213 filament to be 0.3--0.7 pc under the assumption that the density of the gas is the same as the 13CO critical density. Compared to a linear extent of >10 pc in the plane of the sky, this suggests that the 3D morphology of the cloud is sheet-like. 12CO and 13CO PV diagrams perpendicular to the filament axis show that the emission from the gas surrounding B211/B213 is redshifted to the northeast of the filament and blueshifted to the southwest, respectively, and that the velocities of both components approach the filament velocity as the line of sight approaches the filament crest. The PV diagrams predicted by our accretion model are in good agreement with the observed 12CO and 13CO PV diagrams, supporting the scenario of mass accretion into the filament proposed by Palmeirim et al. Moreover, inspection of the distribution of the Halpha and 857 GHz emission in the Taurus-California-Perseus region suggests that the B211/B213 filament may have formed as a result of an expanding supershell generated by the Per OB2 association. Based on these results, we propose a scenario in which the B211/B213 filament was initially formed by large-scale compression of HI gas and then is now growing in mass due to the gravitational accretion of ambient cloud molecular gas.
[10]  oai:arXiv.org:1810.00721  [pdf] - 1811133
Characterizing the properties of nearby molecular filaments observed with Herschel
Comments: Accepted for publication in Astronomy and Astrophysics
Submitted: 2018-10-01
[Abridged] Molecular filaments have received special attention recently, thanks to new observational results on their properties. In particular, our early analysis of filament properties revealed a narrow distribution of median widths centered at a value of about 0.1 pc. Here, we extend and complement our initial study with the analysis of the filamentary structures observed in eight nearby molecular clouds. We use the column density maps derived from Herschel data and the DisPerSE algorithm to trace a network of filaments in each cloud. We build synthetic maps to assess the completeness limit of our extracted sample and validate our measurements. Our analysis yields a selected sample of 599 filaments with aspect ratios larger than 3 and column density contrasts larger than 0.3. We show that our sample is more than 95% complete for column density contrasts larger than 1, with only 5% of spurious detections. On average, more than 15% of the total gas mass in the clouds, and more than 80% of the dense gas mass, is found to be in the form of filaments, respectively. Analysis of the radial column density profiles of the 599 filaments indicates a narrow distribution of crest-averaged inner widths, with a median value of 0.10 pc and an interquartile range of 0.07 pc. In contrast, the filaments span wide ranges in length, central column density, column density contrast, and mass per unit length. The characteristic filament width is well resolved by Herschel observations, and a median value of 0.1 pc is consistently found using three distinct estimates based on (1) a direct measurement of the width at half power after background subtraction, as well as (2) Gaussian and (3) Plummer fits. The existence of a characteristic filament width is further supported by the presence of a tight correlation between mass per unit length and central column density for the observed filaments.
[11]  oai:arXiv.org:1809.04463  [pdf] - 1775685
A catalogue of dense cores and young stellar objects in the Lupus complex based on Herschel Gould Belt Survey observations
Comments: 25 pages, 15 ifgures
Submitted: 2018-09-12
The Herschel Gould Belt Survey key project mapped the bulk of nearby star-forming molecular clouds in five far-infrared bands with the aim of compiling complete census of prestellar cores and young, embedded protostars. In this paper, we present the catalogue of the dense cores and YSOs/protostars extracted from the Herschel maps of the Lupus I, III, and IV molecular clouds. The physical properties of the detected objects were derived by fitting their spectral energy distributions. A total of 532 dense cores, out of which 103 are presumably prestellar in nature, and 38 YSOs/protostars have been detected in the three clouds. Almost all the prestellar cores are associated with filaments against only about one third of the unbound cores and YSOs/protostars. Prestellar core candidates are found even in filaments that are on average thermally sub-critical and over a background column density lower than that measured in other star forming regions so far. The core mass function of the prestellar cores peaks between 0.2 and 0.3 solar masses and it is compatible with the log-normal shape found in other regions. Herschel data reveal several, previously undetected, protostars and new candidates of Class 0 and Class II with transitional disks. We estimate the evolutionary status of the YSOs/protostars using two independent indicators: the $\alpha$ index and the fitting of the spectral energy distribution from near- to far-infrared wavelengths. For 70% of the objects, the evolutionary stages derived with the two methods are in agreement. Lupus is confirmed to be a very low-mass star-forming region, both in terms of the prestellar condensations and of the diffuse medium. Noticeably, in the Lupus clouds we have found star formation activity associated with interstellar medium at low column density, usually quiescent in other (more massive) star forming regions.
[12]  oai:arXiv.org:1801.07805  [pdf] - 1724871
The dense cores and filamentary structure of the molecular cloud in Corona Australis. Herschel SPIRE and PACS observations from the Herschel Gould Belt Survey
Comments: Article Accepted September 2017
Submitted: 2018-01-23
We present a catalogue of prestellar and starless cores within the Corona Australis molecular cloud using photometric data from the Herschel Space Observatory. At a distance of d~130 pc, Corona Australis is one of the closest star-forming regions. Herschel has taken multi-wavelength data of Corona Australis with both the SPIRE and PACS photometric cameras in a parallel mode with wavelengths in the range 70 {\mu}m to 500 {\mu}m. A complete sample of starless and prestellar cores and embedded protostars is identified. Other results from the Herschel Gould Belt Survey have shown spatial correlation between the distribution of dense cores and the filamentary structure within the molecular clouds. We go further and show correlations between the properties of these cores and their spatial distribution within the clouds, with a particular focus on the mass distribution of the dense cores with respect to their filamentary proximity. We find that only lower-mass starless cores form away from filaments, while all of the higher-mass prestellar cores form in close proximity to, or directly on the filamentary structure. This result supports the paradigm that prestellar cores mostly form on filaments. We analyse the mass distribution across the molecular cloud, finding evidence that the region around the Coronet appears to be at a more dynamically advanced evolutionary stage to the rest of the clumps within the cloud.
[13]  oai:arXiv.org:1707.03808  [pdf] - 1585854
Multi-temperature mapping of dust structures throughout the Galactic Plane using the PPMAP tool with Herschel Hi-GAL data
Comments: 14 pages, 12 figures; accepted for publication in MNRAS
Submitted: 2017-07-12
We describe new Hi-GAL based maps of the entire Galactic Plane, obtained using continuum data in the wavelength range 70-500 $\mu$m. These maps are derived with the PPMAP procedure, and therefore represent a significant improvement over those obtained with standard analysis techniques. Specifically they have greatly improved resolution (12 arcsec) and, in addition to more accurate integrated column densities and mean dust temperatures, they give temperature-differential column densities, i.e., separate column density maps in twelve distinct dust temperature intervals, along with the corresponding uncertainty maps. The complete set of maps is available on-line. We briefly describe PPMAP and present some illustrative examples of the results. These include (a) multi-temperature maps of the Galactic HII region W5-E, (b) the temperature decomposition of molecular cloud column-density probability distribution functions, and (c) the global variation of mean dust temperature as a function of Galactocentric distance. Amongst our findings are: (i) a strong localised temperature gradient in W5-E in a direction orthogonal to that towards the ionising star, suggesting an alternative heating source and providing possible guidance for models of the formation of the bubble complex, and (ii) the overall radial profile of dust temperature in the Galaxy shows a monotonic decrease, broadly consistent both with models of the interstellar radiation field and with previous estimates at lower resolution. However, we also find a central temperature plateau within ~ 6 kpc of the Galactic centre, outside of which is a pronounced steepening of the radial profile. This behaviour may reflect the greater proportion of molecular (as opposed to atomic) gas in the central region of the Galaxy.
[14]  oai:arXiv.org:1706.08407  [pdf] - 1585140
Probing changes of dust properties along a chain of solar-type prestellar and protostellar cores in Taurus with NIKA
Comments:
Submitted: 2017-06-26
The characterization of dust properties in the interstellar medium (ISM) is key for star formation. Mass estimates are crucial to determine gravitational collapse conditions for the birth of new stellar objects in molecular clouds. However, most of these estimates rely on dust models that need further observational constraints from clouds to prestellar and protostellar cores. We present results of a study of dust emissivity changes based on mm-continuum data obtained with the NIKA camera at the IRAM-30m telescope. Observing dust emission at 1.15 mm and 2 mm allows us to constrain the dust emissivity index ($\beta$) in the Rayleigh-Jeans tail of the dust spectral energy distribution (SED) far from its peak emission, where the contribution of other parameters (i.e. dust temperature) is important. Focusing on the Taurus molecular cloud, a low-mass star-forming regions in the Gould Belt, we analyze the emission properties of several distinct objects in the B213 filament: three prestellar cores, two Class-0/I protostellar cores and one Class-II object. By means of the ratio of the two NIKA channel-maps, we show that in the Rayleigh-Jeans approximation the dust emissivity index varies among the objects. For one prestellar and two protostellar cores, we produce a robust study using Herschel data to constrain the dust temperature of the sources. By using the Abel transform inversion technique we get accurate radial $\beta$ profiles. We find systematic spatial variations of $\beta$ in the protostellar cores that is not observed in the prestellar core. While in the former case $\beta$ decreases toward the center, in the latter it remains constant. Moreover, $\beta$ appears anticorrelated with the dust temperature. We discuss the implication of these results in terms of dust grain evolution between pre- and protostellar cores.
[15]  oai:arXiv.org:1705.09877  [pdf] - 1583964
Spatial distribution of star formation related to ionized regions throughout the inner Galactic plane
Comments: 15 pages, 12 figures. Accepted for publication by Astronomy and Astrophysics
Submitted: 2017-05-27
We present a comprehensive statistical analysis of star-forming objects located in the vicinities of 1 360 bubble structures throughout the Galactic Plane and their local environments. The compilation of ~70 000 star-forming sources, found in the proximity of the ionized (Hii) regions and detected in both Hi-GAL and GLIMPSE surveys, provided a broad overview of the different evolutionary stages of star-formation in bubbles, from prestellar objects to more evolved young stellar objects (YSOs). Surface density maps of star-forming objects clearly reveal an evolutionary trend where more evolved star-forming objects are found spatially located near the center, while younger star-forming objects are found at the edge of the bubbles. We derived dynamic ages for a subsample of 182 Hii regions for which kinematic distances and radio continuum flux measurements were available. We detect ~80% more star-forming sources per unit area in the direction of bubbles than in the surrounding fields. We estimate ~10% clump formation efficiency (CFE) of Hi-GAL clumps in bubbles, twice the CFE in fields not affected by feedback. We find higher CFE of protostellar clumps in younger bubbles, whose density of the bubble shells is higher. We argue that the formation rate from prestellar to protostellar phase is probably higher during the early stages of the bubble expansion. Evaluation of the fragmentation time inside the shell of bubbles advocates the preexistence of clumps in the medium before the bubble, as supported by numerical simulations. Approximately 23% of the Hi-GAL clumps are found located in the direction of a bubble, with 15% for prestellar clumps and 41% for protostellar clumps. We argue that the high fraction of protostellar clumps may be due to the acceleration of the star-formation process cause by the feedback of the (Hii) bubbles.
[16]  oai:arXiv.org:1608.04353  [pdf] - 1460998
The JCMT and Herschel Gould Belt Surveys: A comparison of SCUBA-2 and Herschel data of dense cores in the Taurus dark cloud L1495
Comments: MNRAS accepted, 19 pages, 14 figures
Submitted: 2016-08-15
We present a comparison of SCUBA-2 850-$\mu$m and Herschel 70--500-$\mu$m observations of the L1495 filament in the Taurus Molecular Cloud with the goal of characterising the SCUBA-2 Gould Belt Survey (GBS) data set. We identify and characterise starless cores in three data sets: SCUBA-2 850-$\mu$m, Herschel 250-$\mu$m, and Herschel 250-$\mu$m spatially filtered to mimic the SCUBA-2 data. SCUBA-2 detects only the highest-surface-brightness sources, principally detecting protostellar sources and starless cores embedded in filaments, while Herschel is sensitive to most of the cloud structure, including extended low-surface-brightness emission. Herschel detects considerably more sources than SCUBA-2 even after spatial filtering. We investigate which properties of a starless core detected by Herschel determine its detectability by SCUBA-2, and find that they are the core's temperature and column density (for given dust properties). For similar-temperature cores, such as those seen in L1495, the surface brightnesses of the cores are determined by their column densities, with the highest-column-density cores being detected by SCUBA-2. For roughly spherical geometries, column density corresponds to volume density, and so SCUBA-2 selects the densest cores from a population at a given temperature. This selection effect, which we quantify as a function of distance, makes SCUBA-2 ideal for identifying those cores in Herschel catalogues that are closest to forming stars. Our results can now be used by anyone wishing to use the SCUBA-2 GBS data set.
[17]  oai:arXiv.org:1605.07434  [pdf] - 1444011
Characterizing filaments in regions of high-mass star formation: High-resolution submilimeter imaging of the massive star-forming complex NGC 6334 with ArT\'eMiS
Comments: 10 pages, 6 figures. A&A, in press
Submitted: 2016-05-24
Herschel observations of nearby molecular clouds suggest that interstellar filaments and prestellar cores represent two fundamental steps in the star formation process. The observations support a picture of low-mass star formation according to which ~ 0.1 pc-wide filaments form first in the cold interstellar medium, probably as a result of large-scale compression of interstellar matter by supersonic turbulent flows, and then prestellar cores arise from gravitational fragmentation of the densest filaments. Whether this scenario also applies to regions of high-mass star formation is an open question, in part because Herschel data cannot resolve the inner width of filaments in the nearest regions of massive star formation. We used the bolometer camera ArTeMiS on the APEX telescope to map the central part of the NGC6334 complex at a factor of > 3 higher resolution than Herschel at 350 microns. Combining ArTeMiS data with Herschel data allowed us to study the structure of the main filament of the complex with a resolution of 8" or < 0.07 pc at d ~ 1.7 kpc. Our study confirms that this filament is a very dense, massive linear structure with a line mass ranging from ~ 500 Msun/pc to ~ 2000 Msun/pc over nearly 10 pc. It also demonstrates that its inner width remains as narrow as W ~ 0.15 +- 0.05 pc all along the filament length, within a factor of < 2 of the characteristic 0.1 pc value found with Herschel for lower-mass filaments in the Gould Belt. While it is not completely clear whether the NGC 6334 filament will form massive stars or not in the future, it is two to three orders of magnitude denser than the majority of filaments observed in Gould Belt clouds, and yet has a very similar inner width. This points to a common physical mechanism for setting the filament width and suggests that some important structural properties of nearby clouds also hold in high-mass star forming regions.
[18]  oai:arXiv.org:1602.03143  [pdf] - 1364946
A census of dense cores in the Taurus L1495 cloud from the Herschel Gould Belt Survey
Comments: 17 pages, 12 figures. Accepted for publication in MNRAS
Submitted: 2016-02-09, last modified: 2016-02-26
We present a catalogue of dense cores in a $\sim 4^\circ\times2^\circ$ field of the Taurus star-forming region, inclusive of the L1495 cloud, derived from Herschel SPIRE and PACS observations in the 70 $\mu$m, 160 $\mu$m, 250 $\mu$m, 350 $\mu$m, and 500 $\mu$m continuum bands. Estimates of mean dust temperature and total mass are derived using modified blackbody fits to the spectral energy distributions. We detect 525 starless cores of which $\sim10$-20% are gravitationally bound and therefore presumably prestellar. Our census of unbound objects is $\sim85$% complete for $M>0.015\,M_\odot$ in low density regions ($A_V\stackrel{<}{_\sim}5$ mag), while the bound (prestellar) subset is $\sim85$% complete for $M>0.1\,M_\odot$ overall. The prestellar core mass function (CMF) is consistent with lognormal form, resembling the stellar system initial mass function, as has been reported previously. All of the inferred prestellar cores lie on filamentary structures whose column densities exceed the expected threshold for filamentary collapse, in agreement with previous reports. Unlike the prestellar CMF, the unbound starless CMF is not lognormal, but instead is consistent with a power-law form below $0.3\,M_\odot$ and shows no evidence for a low-mass turnover. It resembles previously reported mass distributions for CO clumps at low masses ($M\stackrel{<}{_\sim}0.3\,M_\odot$). The volume density PDF, however, is accurately lognormal except at high densities. It is consistent with the effects of self-gravity on magnetized supersonic turbulence. The only significant deviation from lognormality is a high-density tail which can be attributed unambiguously to prestellar cores.
[19]  oai:arXiv.org:1510.09175  [pdf] - 1317107
From forced collapse to H ii region expansion in Mon R2: Envelope density structure and age determination with Herschel
Comments: 25pages A&A sous presse
Submitted: 2015-10-30
The surroundings of HII regions can have a profound influence on their development, morphology, and evolution. This paper explores the effect of the environment on H II regions in the MonR2 molecular cloud. We aim to investigate the density structure of envelopes surrounding HII regions and to determine their collapse and ionisation expansion ages. The Mon R2 molecular cloud is an ideal target since it hosts an H II region association. Column density and temperature images derived from Herschel data were used together to model the structure of HII bubbles and their surrounding envelopes. The resulting observational constraints were used to follow the development of the Mon R2 ionised regions with analytical calculations and numerical simulations. The four hot bubbles associated with H II regions are surrounded by dense, cold, and neutral gas envelopes. The radial density profiles are reminiscent of those of low-mass protostellar envelopes. The inner parts of envelopes of all four HII regions could be free-falling because they display shallow density profiles. As for their outer parts, the two compact HII regions show a density profile, which is typical of the equilibrium structure of an isothermal sphere. In contrast, the central UCHii region shows a steeper outer profile, that could be interpreted as material being forced to collapse. The size of the heated bubbles, the spectral type of the irradiating stars, and the mean initial neutral gas density are used to estimate the ionisation expansion time, texp, 0.1Myr,for the dense UCHII and compact HII regions and 0.35 Myr for the extended HII region. The envelope transition radii between the shallow and steeper density profiles are used to estimate the time elapsed since the formation of the first proto stellar embryo, Tinf : 1Myr, for the ultra-compact, 1.5 / 3Myr for the compact, and greater than 6Myr for the extended HII regions.
[20]  oai:arXiv.org:1509.01819  [pdf] - 1319630
A possible link between the power spectrum of interstellar filaments and the origin of the prestellar core mass function
Comments: 10 pages, 12 figures, Accepted for publication in Astronomy and Astrophysics journal
Submitted: 2015-09-06
Two major features of the prestellar CMF are: 1) a broad peak below 1 Msun, presumably corresponding to a mean gravitational fragmentation scale, and 2) a characteristic power-law slope, very similar to the Salpeter slope of the stellar initial mass function (IMF) at the high-mass end. While recent Herschel observations have shown that the peak of the prestellar CMF is close to the thermal Jeans mass in marginally supercritical filaments, the origin of the power-law tail of the CMF/IMF at the high-mass end is less clear. Inutsuka (2001) proposed a theoretical scenario in which the origin of the power-law tail can be understood as resulting from the growth of an initial spectrum of density perturbations seeded along the long axis of filaments by interstellar turbulence. Here, we report the statistical properties of the line-mass fluctuations of filaments in nearby molecular clouds observed with Herschel using a 1-D power spectrum analysis. The observed filament power spectra were fitted by a power-law function $(P_{true}(s) \propto s^{\alpha})$ after removing the effect of beam convolution at small scales. A Gaussian-like distribution of power-spectrum slopes was found centered at -1.6, close to that of the one-dimensional velocity power spectrum generated by subsonic Kolomogorov turbulence (-1.67). An empirical correlation, $P^{0.5}(s_0) \propto <N_{\rm H_2}>^{1.4 \pm 0.1} $, was also found between the amplitude of each filament power spectrum $P(s_0)$ and the mean column density along the filament $<N_{\rm H_2}>$. Finally, the dispersion of line-mass fluctuations along each filament $\sigma_{\rm M_{line}}$ was found to scale with the physical length $L$ of the filament, roughly as $\sigma_{M_{line}} \propto L^{0.7}$. Overall, our results are consistent with the suggestion that the bulk of the CMF/IMF results from the gravitational fragmentation of filaments.
[21]  oai:arXiv.org:1507.08786  [pdf] - 1450589
Filaments in the Lupus molecular clouds
Comments: 16 pages, 16 figures
Submitted: 2015-07-31
We have studied the filaments extracted from the column density maps of the nearby Lupus 1, 3, and 4 molecular clouds, derived from photometric maps observed with the Herschel satellite. Filaments in the Lupus clouds have quite low column densities, with a median value of $\sim$1.5$\times$10$^{21}$ cm$^{-2}$ and most have masses per unit length lower than the maximum critical value for radial gravitational collapse. Indeed, no evidence of filament contraction has been seen in the gas kinematics. We find that some filaments, that on average are thermally subcritical, contain dense cores that may eventually form stars. This is an indication that in the low column density regime, the critical condition for the formation of stars may be reached only locally and this condition is not a global property of the filament. Finally, in Lupus we find multiple observational evidences of the key role that the magnetic field plays in forming filaments, and determining their confinement and dynamical evolution.
[22]  oai:arXiv.org:1507.05926  [pdf] - 1319598
A census of dense cores in the Aquila cloud complex: SPIRE/PACS observations from the Herschel Gould Belt survey
Comments:
Submitted: 2015-07-21
We present and discuss the results of the Herschel Gould Belt survey observations in a ~11 deg^2 area of the Aquila molecular cloud complex at d~260 pc, imaged with the SPIRE/PACS cameras from 70 to 500 micron. We identify a complete sample of starless dense cores and embedded protostars in this region, and analyze their global properties and spatial distributions. We find a total of 651 starless cores, ~60% of which are gravitationally bound prestellar cores, and they will likely form stars in the future. We also detect 58 protostellar cores. The core mass function (CMF) derived for the prestellar cores is very similar in shape to the stellar initial mass function (IMF), supporting the earlier view that there is a close physical link between the IMF and the CMF. The global shift in mass scale observed between the CMF and the IMF is consistent with a typical star formation efficiency of ~40%. By comparing the numbers of starless cores to the number of young stellar objects, we estimate that the lifetime of prestellar cores is ~1 Myr. We find a strong correlation between the spatial distribution of prestellar cores and the densest filaments. About 90% of the Herschel-identified prestellar cores are located above a background column density corresponding to A_V~7, and ~75% of them lie within filamentary structures with supercritical masses per unit length >~16 M_sun/pc. These findings support a picture wherein the cores making up the peak of the CMF (and probably responsible for the base of the IMF) result primarily from the gravitational fragmentation of marginally supercritical filaments. Given that filaments appear to dominate the mass budget of dense gas at A_V>7, our findings also suggest that the physics of prestellar core formation within filaments is responsible for a characteristic "efficiency" SFR/M_dense ~5+-2 x 10^-8 yr^-1 for the star formation process in dense gas.
[23]  oai:arXiv.org:1501.04846  [pdf] - 1224092
Active star formation at intermediate Galactic latitude: the case of IRAS 06345-3023
Comments: 6 pages, 5 figures, 2 tables
Submitted: 2015-01-20
We report the discovery of a small aggregate of young stars seen in high-resolution, deep near-infrared ($JHK_S$) images towards IRAS 06345-3023 in the outer Galaxy and well below the mid-plane of the Galactic disc. The group of young stars is likely to be composed of low-mass stars, mostly Class I young stellar objects. The stars are seen towards a molecular cloud whose CO map peaks at the location of the IRAS source. The near-infrared images reveal, additionally, the presence of nebular emission with rich morphological features, including arcs in the vicinity of embedded stars, wisps and bright rims of a butterfly-shaped dark cloud. The location of this molecular cloud as a new star formation site well below the Galactic plane in the outer Galaxy indicates that active star formation is taking place at vertical distances larger than those typical of the (thin) disc.
[24]  oai:arXiv.org:1401.7871  [pdf] - 791952
Properties of Starless and Prestellar Cores in Taurus Revealed by Herschel SPIRE/PACS Imaging
Comments: 12 pages, 11 figures; to appear in MNRAS
Submitted: 2014-01-30
The density and temperature structures of dense cores in the L1495 cloud of the Taurus star-forming region are investigated using Herschel SPIRE and PACS images in the 70 $\mu$m, 160 $\mu$m, 250 $\mu$m, 350 $\mu$m and 500 $\mu$m continuum bands. A sample consisting of 20 cores, selected using spectral and spatial criteria, is analysed using a new maximum likelihood technique, COREFIT, which takes full account of the instrumental point spread functions. We obtain central dust temperatures, $T_0$, in the range 6-12 K and find that, in the majority of cases, the radial density falloff at large radial distances is consistent with the $r^{-2}$ variation expected for Bonnor-Ebert spheres. Two of our cores exhibit a significantly steeper falloff, however, and since both appear to be gravitationally unstable, such behaviour may have implications for collapse models. We find a strong negative correlation between $T_0$ and peak column density, as expected if the dust is heated predominantly by the interstellar radiation field. At the temperatures we estimate for the core centres, carbon-bearing molecules freeze out as ice mantles on dust grains, and this behaviour is supported here by the lack of correspondence between our estimated core locations and the previously-published positions of H$^{13}$CO$^+$ peaks. On this basis, our observations suggest a sublimation-zone radius typically $\sim 10^4$ AU. Comparison with previously-published N$_2$H$^+$ data at 8400 AU resolution, however, shows no evidence for N$_2$H$^+$ depletion at that resolution.
[25]  oai:arXiv.org:1311.5086  [pdf] - 1201754
Reconstructing the density and temperature structure of prestellar cores from $Herschel$ data: A case study for B68 and L1689B
Comments: 10 pages, 7 figures, Accepted for publication to A&A
Submitted: 2013-11-20
Utilizing multi-wavelength dust emission maps acquired with $Herschel$, we reconstruct local volume density and dust temperature profiles for the prestellar cores B68 and L1689B using inverse-Abel transform based technique. We present intrinsic radial dust temperature profiles of starless cores directly from dust continuum emission maps disentangling the effect of temperature variations along the line of sight which was previously limited to the radiative transfer calculations. The reconstructed dust temperature profiles show a significant drop in core center, a flat inner part, and a rising outward trend until the background cloud temperature is reached. The central beam-averaged dust temperatures obtained for B68 and L1689B are 9.3 $\pm$ 0.5 K and 9.8 $\pm$0.5 K, respectively, which are lower than the temperatures of 11.3 K and 11.6 K obtained from direct SED fitting. The best mass estimates derived by integrating the volume density profiles of B68 and L1689B are 1.6 M_sol and 11 M_sol, respectively. Comparing our results for B68 with the near-infrared extinction studies, we find that the dust opacity law adopted by the HGBS project, $\kappa_{\lambda} =0.1(\lambda/300 \mu m)^{-2}$, agrees to within 50% with the dust extinction constraints
[26]  oai:arXiv.org:1304.4098  [pdf] - 1165971
First results from the Herschel Gould Belt Survey in Taurus
Comments: Accepted to publication by MNRAS, 11 pages, 7 figures. CSAR available from http://star.jmkprime.org/csar
Submitted: 2013-04-15
The whole of the Taurus region (a total area of 52 sq. deg.) has been observed by the Herschel SPIRE and PACS instruments at wavelengths of 70, 160, 250, 350 and 500 {\mu}m as part of the Herschel Gould Belt Survey. In this paper we present the first results from the part of the Taurus region that includes the Barnard 18 and L1536 clouds. A new source-finding routine, the Cardiff Source-finding AlgoRithm (CSAR), is introduced, which is loosely based on CLUMPFIND, but that also generates a structure tree, or dendrogram, which can be used to interpret hierarchical clump structure in a complex region. Sources were extracted from the data using the hierarchical version of CSAR and plotted on a mass-size diagram. We found a hierarchy of objects with sizes in the range 0.024-2.7 pc. Previous studies showed that gravitationally bound prestellar cores and unbound starless clumps appeared in different places on the mass-size diagram. However, it was unclear whether this was due to a lack of instrumental dynamic range or whether they were actually two distinct populations. The excellent sensitivity of Herschel shows that our sources fill the gap in the mass-size plane between starless and pre-stellar cores, and gives the first clear supporting observational evidence for the theory that unbound clumps and (gravitationally bound) prestellar cores are all part of the same population, and hence presumably part of the same evolutionary sequence (c.f. Simpson et al. 2011).
[27]  oai:arXiv.org:1304.0327  [pdf] - 646048
What determines the density structure of molecular clouds ? A case study of Orion B with Herschel
Comments: Astrophysical Journal Letters, received: 2012 December 30; accepted 2013 February 26
Submitted: 2013-04-01
A key parameter to the description of all star formation processes is the density structure of the gas. In this letter, we make use of probability distribution functions (PDFs) of Herschel column density maps of Orion B, Aquila, and Polaris, obtained with the Herschel Gould Belt survey (HGBS). We aim to understand which physical processes influence the PDF shape, and with which signatures. The PDFs of Orion B (Aquila) show a lognormal distribution for low column densities until Av 3 (6), and a power-law tail for high column densities, consistent with a rho r^-2 profile for the equivalent spherical density distribution. The PDF of Orion B is broadened by external compression due to the nearby OB stellar aggregates. The PDF of a quiescent subregion of the non-star-forming Polaris cloud is nearly lognormal, indicating that supersonic turbulence governs the density distribution. But we also observe a deviation from the lognormal shape at Av>1 for a subregion in Polaris that includes a prominent filament. We conclude that (i) the point where the PDF deviates from the lognormal form does not trace a universal Av-threshold for star formation, (ii) statistical density fluctuations, intermittency and magnetic fields can cause excess from the lognormal PDF at an early cloud formation stage, (iii) core formation and/or global collapse of filaments and a non-isothermal gas distribution lead to a power-law tail, and (iv) external compression broadens the column density PDF, consistent with numerical simulations.
[28]  oai:arXiv.org:1211.6360  [pdf] - 1158086
Herschel view of the Taurus B211/3 filament and striations: Evidence of filamentary growth?
Comments: 9 pages, 7 figures. Accepted for publication by Astronomy and Astrophysics
Submitted: 2012-11-27
We present first results from the Herschel Gould Belt survey for the B211/L1495 region in the Taurus molecular cloud. Thanks to their high sensitivity and dynamic range, the Herschel images reveal the structure of the dense, star-forming filament B211 with unprecedented detail, along with the presence of striations perpendicular to the filament and generally oriented along the magnetic field direction as traced by optical polarization vectors. Based on the column density and dust temperature maps derived from the Herschel data, we find that the radial density profile of the B211 filament approaches a power-law behavior {\rho} {\propto} r^(-2.0{\pm}0.4) at large radii and that the temperature profile exhibits a marked drop at small radii. The observed density and temperature profiles of the B211 filament are in good agreement with a theoretical model of a cylindrical filament undergoing gravitational contraction with a polytropic equation of state: P {\propto} {\rho}^{\gamma} and T {\propto} {\rho}^({\gamma}-1), with {\gamma}=0.97{\pm}0.01<1 (i.e. not strictly isothermal). The morphology of the column density map, where some of the perpendicular striations are apparently connected to the B211 filament, further suggests that the material may be accreting along the striations onto the main filament. The typical velocities expected for the infalling material in this picture are ~0.5-1 km/s, which are consistent with the existing kinematical constraints from previous CO observations.
[29]  oai:arXiv.org:1211.0275  [pdf] - 1157450
Resolving the Vela C ridge with P-ArTeMiS and Herschel
Comments: Accepted by A&A Letters; 4 pages with an appendix; 6 figures - 2 online, 1 in an appendix
Submitted: 2012-11-01
We present APEX/P-ArT\'eMiS 450\mu m continuum observations of RCW 36 and the adjacent ridge, a high-mass high-column density filamentary structure at the centre of the Vela C molecular cloud. These observations, at higher resolution than Herschel's SPIRE camera, reveal clear fragmentation of the central star-forming ridge. Combined with PACS far-infrared and SPIRE sub-millimetre observations from the Herschel HOBYS project we build a high resolution column density map of the region mapped with P-ArT\'eMiS. We extract the radial density profile of the Vela C ridge which with a ~ 0.1pc central width is consistent with that measured for low-mass star-forming filaments in the Herschel Gould Belt survey. Direct comparison with Serpens South, of the Gould Belt Aquila complex, reveals many similarities between the two regions. Despite likely different formation mechanisms and histories, the Vela C ridge and Serpens South filament share common characteristics, including their filament central widths.
[30]  oai:arXiv.org:1206.4837  [pdf] - 1124283
Profiling filaments: comparing near-infrared extinction and submillimetre data in TMC-1
Comments: accepted to Astronomy & Astrophysics; abstract has been shortened for astroph
Submitted: 2012-06-21
Interstellar filaments are an important part of star formation. To understand the structure of filaments, cross-section profiles are often fitted with Plummer profiles. This profiling is often done with submm studies, such as Herschel. It would be convenient if filament properties could also be studied using groundbased NIR data. We compare the filament profiles obtained by NIR extinction and submm observations to find out if reliable profiles can be derived using NIR data. We use J-, H-, and K-band data of a filament north of TMC-1 to derive an extinction map from colour excesses of background stars. We compare the Plummer profiles obtained from extinction maps with Herschel dust emission maps. We present 2 methods to estimate profiles from NIR: Plummer profile fits to median Av of stars or directly to the Av of individual stars. We compare the methods by simulations. In simulations extinction maps and the new methods give correct results to within ~10-20 for modest densities. Direct fit to data on individual stars gives more accurate results than extinction map, and can work in higher density. In profile fits to real observations, values of Plummer parameters are generally similar to within a factor of ~2. Although parameter values can vary significantly, estimates of filament mass usually remain accurate to within some tens of per cent. Our results for TMC-1 are in agreement with earlier results. High resolution NIR data give more details, but 2MASS data can be used to estimate profiles. NIR extinction can be used as an alternative to submm observations to profile filaments. Direct fits of stars can also be a valuable tool. Plummer profile parameters are not always well constrained, and caution should be taken when making fits. In the evaluation of Plummer parameters, one can use the independence of dust emission and NIR data and the difference in the shapes of the confidence regions.
[31]  oai:arXiv.org:1206.1243  [pdf] - 1123927
The spine of the swan: A Herschel study of the DR21 ridge and filaments in Cygnus X
Comments: 8 pages, 5 figures, accepted for publication as a Letter in Astronomy and Astrophysics
Submitted: 2012-06-06
In order to characterise the cloud structures responsible for the formation of high-mass stars, we present Herschel observations of the DR21 environment. Maps of the column density and dust temperature unveil the structure of the DR21 ridge and several connected filaments. The ridge has column densities larger than 1e23/cm^2 over a region of 2.3 pc^2. It shows substructured column density profiles and branching into two major filaments in the north. The masses in the studied filaments range between 130 and 1400 Msun whereas the mass in the ridge is 15000 Msun. The accretion of these filaments onto the DR21 ridge, suggested by a previous molecular line study, could provide a continuous mass inflow to the ridge. In contrast to the striations seen in e.g., the Taurus region, these filaments are gravitationally unstable and form cores and protostars. These cores formed in the filaments potentially fall into the ridge. Both inflow and collisions of cores could be important to drive the observed high-mass star formation. The evolutionary gradient of star formation running from DR21 in the south to the northern branching is traced by decreasing dust temperature. This evolution and the ridge structure can be explained by two main filamentary components of the ridge that merged first in the south.
[32]  oai:arXiv.org:1203.6472  [pdf] - 1117631
Cluster-formation in the Rosette molecular cloud at the junctions of filaments
Comments: A&A Letter, in press
Submitted: 2012-03-29
For many years feedback processes generated by OB-stars in molecular clouds, including expanding ionization fronts, stellar winds, or UV-radiation, have been proposed to trigger subsequent star formation. However, hydrodynamic models including radiation and gravity show that UV-illumination has little or no impact on the global dynamical evolution of the cloud. The Rosette molecular cloud, irradiated by the NGC2244 cluster, is a template region for triggered star-formation, and we investigated its spatial and density structure by applying a curvelet analysis, a filament-tracing algorithm (DisPerSE), and probability density functions (PDFs) on Herschel column density maps, obtained within the HOBYS key program. The analysis reveals not only the filamentary structure of the cloud but also that all known infrared clusters except one lie at junctions of filaments, as predicted by turbulence simulations. The PDFs of sub-regions in the cloud show systematic differences. The two UV-exposed regions have a double-peaked PDF we interprete as caused by shock compression. The deviations of the PDF from the log-normal shape typically associated with low- and high-mass star-forming regions at Av~3-4m and 8-10m, respectively, are found here within the very same cloud. This shows that there is no fundamental difference in the density structure of low- and high-mass star-forming regions. We conclude that star-formation in Rosette - and probably in high-mass star-forming clouds in general - is not globally triggered by the impact of UV-radiation. Moreover, star formation takes place in filaments that arose from the primordial turbulent structure built up during the formation of the cloud. Clusters form at filament mergers, but star formation can be locally induced in the direct interaction zone between an expanding HII--region and the molecular cloud.
[33]  oai:arXiv.org:1203.3403  [pdf] - 1117328
The Pipe Nebula as seen with Herschel: Formation of filamentary structures by large-scale compression ?
Comments: 9 pages, 9 figures, accepted for publication in A&A
Submitted: 2012-03-15
A growing body of evidence indicates that the formation of filaments in interstellar clouds is a key component of the star formation process. In this paper, we present new Herschel PACS and SPIRE observations of the B59 and Stem regions in the Pipe Nebula complex, revealing a rich, organized network of filaments. The asymmetric column density profiles observed for several filaments, along with the bow-like edge of B59, indicates that the Pipe Nebula is being compressed from its western side, most likely by the winds from the nearby Sco OB2 association. We suggest that this compressive flow has contributed to the formation of some of the observed filamentary structures. In B59, the only region of the entire Pipe complex showing star formation activity, the same compressive flow has likely enhanced the initial column density of the clump, allowing it to become globally gravitationally unstable. Although more speculative, we propose that gravity has also been responsible for shaping the converging filamentary pattern observed in B59. While the question of the relative impact of large-scale compression and gravity remains open in B59, large-scale compression appears to be a plausible mechanism for the initial formation of filamentary structures in the rest of the complex
[34]  oai:arXiv.org:0912.0927  [pdf] - 1018635
Young stars and reflection nebulae near the lower "edge" of the Galactic molecular disc
Comments: 11 pages, 13 figures
Submitted: 2009-12-04
We investigate the star formation occurring in a region well below the Galactic plane towards the optical reflection nebula ESO 368-8 (IRAS 07383-3325). We confirm the presence of a small young stellar cluster (or aggregate of tens of YSOs) identified earlier, embedded in a molecular cloud located near the lower "edge" of the Galactic disc, and characterise the young stellar population. We report the discovery of a near-infrared nebula, and present a CO map revealing a new dense, dynamic cloud core. We used near-infrared JHKs images, millimetre CO spectra and optical V-band images. This star formation region displays an optical reflection nebula (ESO 368-8) and a near-infrared nebula located about 46" (1.1 pc) from each other. The two nebulae are likely to be coeval and to represent two manifestations of the same single star formation episode with about 1 Myr age. The near-IR nebula reveals an embedded, optically and near-IR invisible source whose light scatters off a cavity carved by previous stellar jets or molecular outflows and into our line-of-sight. The molecular cloud is fully covered by our CO(J=1-0) maps and, traced by this line, extends over a region of 7.8 x 7.8 pc^2, exhibiting an angular size 5.4' x 5.4' and shape (close to circular) similar to spherical (or slightly cometary) globules. Towards the direction of the near-IR nebula, the molecular cloud contains a dense core where the molecular gas exhibits large line widths indicative of a very dynamical state, with stirred gas and supersonic motions. Our estimates of the mass of the molecular gas in this region range from 600 to 1600 solar masses. The extinction Av towards the positions of the optical reflection nebula and of the near-IR nebula was found to be Av=3-4 mag and Av=12-15 mag, respectively.
[35]  oai:arXiv.org:0904.3502  [pdf] - 1002002
Molecular gas and a new young stellar cluster in the far outer Galaxy
Comments: 11 pages, 13 figures
Submitted: 2009-04-22
We investigate the star-formation ocurring in the region towards IRAS07527-3446 in the molecular cloud [MAB97]250.63-3.63, in the far outer Galaxy. We report the discovery of a new young stellar cluster, and describe its properties and those of its parent molecular cloud. Near-infrared JHKS images were obtained with VLT/ISAAC, and millimetre line CO spectra were obtained with the SEST telescope. VLA archive date were also used. The cloud and cluster are located at a distance of 10.3 kpc and a Galactocentric distance of 15.4 kpc, in the far outer Galaxy. Morphologically, IRAS 07527-3446 appears as a young embedded cluster of a few hundred stars seen towards the position of the IRAS source, extending for about 2-4 pc and exhibiting sub-clustering. The cluster contains low and intermediate-mass young reddened stars, a large fraction having cleared the inner regions of their circumstellar discs responsible for (H-Ks) colour excess. The observations are compatible with a < 5 Myr cluster with variable spatial extinction of between Av = 5 and Av = 11. Decomposition of CO emission in clumps, reveals a clump clearly associated with the cluster position, of mass 3.3 x 10^3 M(solar). Estimates of the slopes of the Ks-band luminosity function and of the star-formation efficiency yield values similar to those seen in nearby star-formation sites. These findings reinforce previous results that the distant outer Galaxy continues to be active in the production of new and rich stellar clusters, with the physical conditions required for the formation of rich clusters continuing to be met in the very distant environment of the outer Galactic disc.