MAIA, the Mercator Advanced Imager for Asteroseismology, is a new fast-cadence 3-channel photometric instrument. It is installed on the 1.2-m Mercator telescope at the Roque de Los Muchachos Observatory in La Palma, Spain. MAIA comprises 3 cameras that simultaneously observe the same 9.4 x 14.1 arcmin field in 3 different colour bands (u, g and r). Each camera is based on a very large frame-transfer detector (CCD42-C0) of 2kx6k pixels, specially designed for rapid time-series photometry. These CCDs were originally developed by e2v for ESA's cancelled Eddington space mission and are now on permanent loan to the Institute of Astronomy of the KU Leuven, Belgium. The acquisition system of MAIA uses a single ARC GEN-III controller, custom programmed to allow differing exposure times for each of the three CCDs. Predefined sequences synchronize each read-out with the shortest integration time. Detectors that are not read-out at the end of an exposure continue integrating and can be read-out in one of the subsequent cycles. This read method takes full advantage of the frame-transfer functionality of the CCD42-C0 detectors and allows optimisation of the exposure times for each wavelength band. This then gives a similar exposure depth in each of the 3 arms despite the fact that the UV channel typically sees much less flux. We present the CCD42-C0 detectors, their characterisation, including a thorough analysis of their non-linearity, and the MAIA data-acquisition system.

MAIA, a three-channel imager targeting fast cadence photometry, was recently installed on the Mercator telescope (La Palma, Spain). This instrument observes a 9.4 x 14.1 arcmin field of view simultaneously in three color bands ($u$, $g$ and $r$), using three of the largest (un-) available frame-transfer CCDs, namely the 2k x 6k CCD42-C0 from e2v. As these detectors are housed in three separate cryostats, compact cooling devices are required that offer sufficient power to cool the large chips to a temperature of 165K. We explored a broad spectrum of cooling options and technologies to cool the MAIA detectors. Finally, compact free-piston Stirling coolers were selected, namely the CryoTel MT cryo-coolers from SUNPOWER, that can extract 5W of heat at a temperature of 77K. In this contribution we give details of the MAIA detector cooling solution. We also discuss the general usability of this type of closed-cycle cryo-coolers for astronomical detectors. They offer distinct advantages but the vibrations caused by mechanical cryo-cooling impose a serious drawback. We present a solution to mechanically decouple the coolers from the instrument and show some results of how this reduces the vibrations to a level that is acceptable for most applications on astronomical telescopes.

MAIA, an acronym for Mercator Advanced Imager for Asteroseismology, is a three-channel instrument that targets fast-cadence three-colour photometry, installed at the 1.2-m Mercator telescope at the Roque de los Muchachos at La Palma (Canary Islands, Spain). This instrument observes a 9.4x14.1arcmin2 Field-of-View simultaneously in three wavelength bands on three large frame-transfer CCDs. These detectors were developed for ESA's cancelled Eddington space mission and were offered on permanent loan to the Institute of Astronomy (KU Leuven, Belgium). MAIA uses its own ugr photometric system that is a crude approximation of the SDSS system. The instrument is designed to perform multi-colour observations for asteroseismology, with specific emphasis on subdwarf and white dwarf single and binary stars. We describe the design of the instrument, discuss key components, and report on its performance and first results.

The HERMES high-resolution spectrograph project aims at exploiting the specific potential of small but flexible telescopes in observational astrophysics. The optimised optical design of the spectrograph is based on the well-proven concept of white-pupil beam folding for high-resolution spectroscopy. In this contribution we present the complete project, including the spectrograph design and procurement details, the telescope adaptor and calibration unit, the detector system, as well as the optimised data-reduction pipeline. We present a detailed performance analysis to show that the spectrograph performs as specified both in optical quality and in total efficiency. With a spectral resolution of 85000 (63000 for the low-resolution fibre), a spectral coverage from 377 to 900nm in a single exposure and a peak efficiency of 28%, HERMES proves to be an ideal instrument for building up time series of high-quality data of variable (stellar) phenomena.