We present ultraviolet (UV) spectroscopy and photometry of four Type Ia supernovae (SNe 2004dt, 2004ef, 2005M, and 2005cf) obtained with the UV prism of the Advanced Camera for Surveys on the Hubble Space Telescope. This dataset provides unique spectral time series down to 2000 Angstrom. Significant diversity is seen in the near maximum-light spectra (~ 2000--3500 Angstrom) for this small sample. The corresponding photometric data, together with archival data from Swift Ultraviolet/Optical Telescope observations, provide further evidence of increased dispersion in the UV emission with respect to the optical. The peak luminosities measured in uvw1/F250W are found to correlate with the B-band light-curve shape parameter dm15(B), but with much larger scatter relative to the correlation in the broad-band B band (e.g., ~0.4 mag versus ~0.2 mag for those with 0.8 < dm15 < 1.7 mag). SN 2004dt is found as an outlier of this correlation (at > 3 sigma), being brighter than normal SNe Ia such as SN 2005cf by ~0.9 mag and ~2.0 mag in the uvw1/F250W and uvm2/F220W filters, respectively. We show that different progenitor metallicity or line-expansion velocities alone cannot explain such a large discrepancy. Viewing-angle effects, such as due to an asymmetric explosion, may have a significant influence on the flux emitted in the UV region. Detailed modeling is needed to disentangle and quantify the above effects.

Deflagration-to-detonation transition (DDT) can occur in environments ranging from experimental and industrial systems to astrophysical thermonuclear (type Ia) supernovae explosions. Substantial progress has been made in explaining the nature of DDT in confined systems with walls, internal obstacles, or pre-existing shocks. It remains unclear, however, whether DDT can occur in unconfined media. Here we use direct numerical simulations (DNS) to show that for high enough turbulent intensities unconfined, subsonic, premixed, turbulent flames are inherently unstable to DDT. The associated mechanism, based on the nonsteady evolution of flames faster than the Chapman-Jouguet deflagrations, is qualitatively different from the traditionally suggested spontaneous reaction wave model, and thus does not require the formation of distributed flames. Critical turbulent flame speeds, predicted by this mechanism for the onset of DDT, are in agreement with DNS results.

We study the dynamics and properties of a turbulent flame, formed in the presence of subsonic, high-speed, homogeneous, isotropic Kolmogorov-type turbulence in an unconfined system. Direct numerical simulations are performed with Athena-RFX, a massively parallel, fully compressible, high-order, dimensionally unsplit, reactive-flow code. A simplified reaction-diffusion model represents a stoichiometric H2-air mixture. The system being modeled represents turbulent combustion with the Damkohler number Da = 0.05 and with the turbulent velocity at the energy injection scale 30 times larger than the laminar flame speed. The simulations show that flame interaction with high-speed turbulence forms a steadily propagating turbulent flame with a flame brush width approximately twice the energy injection scale and a speed four times the laminar flame speed. A method for reconstructing the internal flame structure is described and used to show that the turbulent flame consists of tightly folded flamelets. The reaction zone structure of these is virtually identical to that of the planar laminar flame, while the preheat zone is broadened by approximately a factor of two. Consequently, the system evolution represents turbulent combustion in the thin-reaction zone regime. The turbulent cascade fails to penetrate the internal flame structure, and thus the action of small-scale turbulence is suppressed throughout most of the flame. Finally, our results suggest that for stoichiometric H2-air mixtures, any substantial flame broadening by the action of turbulence cannot be expected in all subsonic regimes.

(Abridged) Direct numerical simulations of the interaction of a premixed flame with driven, subsonic, homogeneous, isotropic, Kolmogorov-type turbulence in an unconfined system are used to study the mechanisms determining the turbulent flame speed, S_T, in the thin reaction zone regime. High intensity turbulence is considered with the r.m.s. velocity 35 times the laminar flame speed, S_L, resulting in the Damkohler number Da = 0.05. Here we show that: (1) The flame brush has a complex internal structure, in which the isosurfaces of higher fuel mass fractions are folded on progressively smaller scales. (2) Global properties of the turbulent flame are best represented by the structure of the region of peak reaction rate, which defines the flame surface. (3) In the thin reaction zone regime, S_T is predominantly determined by the increase of the flame surface area, A_T, caused by turbulence. (4) The observed increase of S_T relative to S_L exceeds the corresponding increase of A_T relative to the surface area of the planar laminar flame, on average, by ~14%, varying from only a few percent to ~30%. (5) This exaggerated response is the result of tight flame packing by turbulence, which causes frequent flame collisions and formation of regions of high flame curvature, or "cusps." (6) The local flame speed in the cusps substantially exceeds its laminar value, which results in a disproportionately large contribution of cusps to S_T compared with the flame surface area in them. (7) A criterion is established for transition to the regime significantly influenced by cusp formation. In particular, at Karlovitz numbers Ka > 20, flame collisions provide an important mechanism controlling S_T, in addition to the increase of A_T by large-scale motions and the potential enhancement of diffusive transport by small-scale turbulence.

We study a Type Ia supernova explosion using large-scale three-dimensional numerical simulations based on reactive fluid dynamics with a simplified mechanism for nuclear reactions and energy release. The initial deflagration stage of the explosion involves a subsonic turbulent thermonuclear flame propagating in the gravitational field of an expanding white dwarf. The deflagration produces an inhomogeneous mixture of unburned carbon and oxygen with intermediate-mass and iron-group elements in central parts of the star. During the subsequent detonation stage, a supersonic detonation wave propagates through the material unburned by the deflagration. The total energy released in this delayed-detonation process, (1.3-1.6)x10^51 ergs, is consistent with a typical range of kinetic energies obtained from observations. In contrast to the deflagration model that releases only about 0.6x10^51 ergs, the delayed-detonation model does not leave carbon, oxygen, and intermediate-mass elements in central parts of a white dwarf. This removes the key disagreement between three-dimensional simulations and observations, and makes a delayed detonation the mostly likely mechanism for Type Ia supernova explosions.

We study a type Ia supernova explosion using three-dimensional numerical simulations based on reactive fluid dynamics. We consider a delayed-detonation model that assumes a deflagration-to-detonation transition. In contrast to the pure deflagration model, the delayed-detonation model releases enough energy to account for a healthy explosion, and does not leave carbon, oxygen, and intermediate-mass elements in central parts of a white dwarf. This removes the key disagreement between simulations and observations, and makes a delayed detonation the mostly likely mechanism for type Ia supernovae.

Large-scale three-dimensional numerical simulations of the deflagration stage of a thermonuclear supernova explosion show the formation and evolution of a highly convoluted turbulent flame in a gravitational field of an expanding carbon-oxygen white dwarf. The flame dynamics is dominated by the gravity-induced Rayleigh-Taylor instability that controls the burning rate. The thermonuclear deflagration releases enough energy to produce a healthy explosion. The turbulent flame, however, leaves large amounts of unburnt and partially burnt material near the star center, whereas observations imply these materials only in outer layers. This disagreement could be resolved if the deflagration triggers a detonation.

We numerically studied the explosion of a supernova caused by supersonic jets present in its center. The jets are assumed to be generated by a magneto-rotational mechanism when a stellar core collapses into a neutron star. We simulated the process of the jet propagation through the star, jet breakthrough, and the ejection of the supernova envelope by the lateral shocks generated during jet propagation. The end result of the interaction is a highly nonspherical supernova explosion with two high-velocity jets of material moving in polar directions, and a slower moving, oblate, highly distorted ejecta containing most of the supernova material. The jet-induced explosion is entirely due to the action of the jets on the surrounding star and does not depend on neutrino transport or re-acceleration of a stalled shock. The jet mechanism can explain the observed high polarization of Type Ib,c and Type II supernovae, pulsar kicks, very high velocity material observed in supernova remnants, indications that radioactive material was carried to the hydrogen-rich layers in SN1987A, and some others observations that are very difficult or impossible to explain by the neutrino energy deposition mechanism. The breakout of the jet from a compact, hydrogen- deficient core may account for the gamma-ray bursts and radio outburst associated with SN1998bw/GRB980425.

We derive the criteria for deflagration to detonation transition (DDT) in a Type Ia supernova. The theory is based on the two major assumptions: (i) detonation is triggered via the Zeldovich gradient mechanism inside a region of mixed fuel and products, (ii) the mixed region is produced by a turbulent mixing of fuel and products either inside an active deflagration front or during the global expansion and subsequent contraction of an exploding white dwarf. We determine the critical size of the mixed region required to initiate a detonation in a degenerate carbon-oxygen mixture. This critical length is much larger than the width of the reaction front of a Chapman-Jouguet detonation. However, at densities greater than simeq 5 x 10^6 g cm^-3, it is much smaller than the size of a white dwarf. We derive the critical turbulent intensity required to create the mixed region inside an active deflagration front in which a detonation can form. We conclude that the density rho_tr at which a detonation can form in a carbon-oxygem white dwarf is low, less than 2 - 5 x 10^7 g cm^-3, but greater than 5 x 10^6 g cm^-3.

This paper outlines a theoretical approach for predicting the onset of detonation in unconfined turbulent flames which is relevant both to problems of terrestrial combustion and to thermonuclear burning in Type Ia supernovae. Two basic assumuptions are made: 1) the gradient mechanism is the inherent mechanism that leads to DDT in unconfined conditions, and 2) the sole mechanism for preparing the gradient in induction time is by turbulent mixing and local flame quenching. The criterion for DDT is derived in terms of the one-dimensional detonation wave thickness, the laminar flame speed, and the laminar flame thickness in the reactive gas. This approach gives a lower-bound criterion for DDT for conditions where shock preheating, wall effects, and interactions with obstacles are absent. Regions in parameter space where unconfined DDT can and cannot occur are determined. A subsequent paper will address these issues specifically in the astrophysical context.

Turbulent combustion is three-dimensional. Turbulence in a Type Ia supernova is driven on large scales by the buoyancy of burning products. The turbulent cascade penetrates down to very small scales, and makes the rate of deflagration independent of the microphysics. The competition between the turbulent cascade and the freeze-out of turbulent motions due to stellar expansion determines the largest scale participating in the cascade. This sets the bulk rate of a deflagration in a supernova. The freeze-out limits the bulk rate of deflagration to a value that makes a powerful explosion impossible. Two-dimensional simulations cannot capture these essential elements of turbulent combustion, even in principle. A powerful delayed detonation explosion can take place if the burning makes a transition to a detonation. A deflagration to detonation transition (DDT) can occur in a layer of mixed cold fuel and hot burning products created either inside an active turbulent burning region by a high intensity of turbulence, or by mixing cold fuel with ashes of a dead deflagration front during the global pulsation of a star, or by both.