The Prime Focus Spectrograph (PFS) of the Subaru Measurement of Images and Redshifts (SuMIRe) project for Subaru telescope consists in four identical spectrographs fed by 600 fibers each. Each spectrograph is composed by an optical entrance unit that creates a collimated beam and distributes the light to three channels, two visibles and one near infrared. This paper presents the on-going effort for the tests & integration process for the first spectrograph channel: we have developed a detailed Assembly Integration and Test (AIT) plan, as well as the methods, detailed processes and I&T tools. We describe the tools we designed to assemble the parts and to test the performance of the spectrograph. We also report on the thermal acceptance tests we performed on the first visible camera unit. We also report on and discuss the technical difficulties that did appear during this integration phase. Finally, we detail the important logistic process that is require to transport the components from other country to Marseille.

The Prime Focus Spectrograph (PFS) is a new optical/near-infrared multi-fiber spectrograph design for the prime focus of the 8.2m Subaru telescope. PFS will cover 1.3 degree diameter field with 2394 fibers to complement the imaging capability of Hyper SuprimeCam (HSC). The prime focus unit of PFS called Prime Focus Instrument (PFI) provides the interface with the top structure of Subaru telescope and also accommodates the optical bench in which Cobra fiber positioners are located. In addition, the acquisition and guiding cameras (AGCs), the optical fiber positioner system, the cable wrapper, the fiducial fibers, illuminator, and viewer, the field element, and the telemetry system are located inside the PFI. The mechanical structure of the PFI was designed with special care such that its deflections sufficiently match those of the HSC's Wide Field Corrector (WFC) so the fibers will stay on targets over the course of the observations within the required accuracy. In this report, the latest status of PFI development will be given including the performance of PFI components, the setup and performance of the integration and testing equipment.

Recent research on global climate changes points to three distinct sources of climate disturbance: anthropogenic; natural changes in the oceans and atmosphere; and irregularities in the solar cycles. One of the most direct ways to survey an exogenous component of the climatic variability is through the measurement of variations in the diameter and shape of the solar disk. At Observatorio Nacional/MCTI, Rio de Janeiro, after several years of diameter observation using a CCD Solar Astrolabe, these measurements are now performed by a state-of-the-art Solar Heliometer. The heliometric method is one of the most successful techniques to measure small variations of angles. Its principle has been used for the latest space borne astrometric missions, aiming to milli-arcsecond precision. The success of this method relies in the fact that it minimizes the dependence of angular measurements to the thermal and mechanical stability of the instrument. However in the classic heliometer the objective is split into two halves to which is applied a linear displacement along the cut, thus still leaving room for a residual dependence with the focus, due to non-concentricity of the beams of the two images. The focus variation, as well as the effects brought by the large temperature variations during solar observations, was tackled in the Solar Heliometer by having all optical elements and their niches made on CCZ, and the telescope tube on carbon fiber, both materials of negligible thermal coefficient. Additionally, the measures are made perpendicular to the separation direction and the plate scale can be known at every time from the solar motion itself. We present the results from the first year of measurements, in special exploring the upheaval of solar activity on late 2011.

The heliometer of Fraunhofer in Koenigsberg (1824) is a refractor in which the lens is split into two halves to which is applied a linear displacement along the cut. Later in 1890s a variation of the heliometer has been realized in Goettingen using a beam splitting wedge: these methods were both subjected to chromatic and refractive aberrations; the second configuration being much less affected by thermal fluctuations. The mirrored version of the heliometer conceived at the Observatorio Nacional of Rio de Janeiro overcome these problems: the two halves of the vitrified ceramic mirror split at a fixed heliometric angle produce the two images of the Sun exempt of chromatisms and distortions. The heliometer of Rio is a telescope which can rotate around its axis, to measure the solar diameter at all heliolatitudes. A further development of that heliometer, now under construction, is the annular heliometer, in which the mirrors are concentric, with symmetrical Point Spread Functions. Moreover the location of the Observatory of Rio de Janeiro allows zenithal observations, with no atmospheric refraction at all heliolatitudes, in December and January.