Normalized to: Oger, R.
[2]
oai:arXiv.org:1710.07128 [pdf] - 1942041
TiCkS: A Flexible White-Rabbit Based Time-Stamping Board
Submitted: 2017-10-19
We have developed the TiCkS board (Time and Clock Stamping) based on the
White Rabbit (WR) SPEC node (Simple PCIe FMC carrier), to provide ns-precision
time-stamps (TSs) of input signals (e.g., triggers from a connected device) and
transmission of these TSs to a central collection point. TiCkS was developed
within the specifications of the Cherenkov Telescope Array (CTA) as one of the
candidate TS nodes, with a small form-factor allowing its use in any CTA
camera. The essence of this development concerns the firmware in its Spartan-6
FPGA (Field-Programmable Gate Array), with the addition of: 1) a ns-precision
TDC (Time-to-Digital Convertor) for the TSs; and 2) a UDP stack (User Datagram
Protocol) to send TSs and auxiliary information over the WR fibre, and to
receive configuration & slow control commands over the same fibre. It also
provides a PPS (Pulse Per Second) and other clock signals to the connected
device, from which it can receive auxiliary event-type information over an SPI
link (Serial Peripheral Interface). A version of TiCkS with an FMC connector
(FPGA Mezzanine Card) will be made available in the WR OpenHardware repository,
so allowing the use of a mezzanine card with varied formats of input/output
connectors, providing a cheap, flexible, and reliable solution for ns-precision
time-stamping of trigger signals up to 400 kHz, for use in other experiments.