sort results by

Use logical operators AND, OR, NOT and round brackets to construct complex queries. Whitespace-separated words are treated as ANDed.

Show articles per page in mode

Oberst, Jürgen

Normalized to: Oberst, J.

6 article(s) in total. 48 co-authors, from 1 to 4 common article(s). Median position in authors list is 3,0.

[1]  oai:arXiv.org:1908.07731  [pdf] - 2066926
GAUSS -- A Sample Return Mission to Ceres
Comments: Section 3.4 revised; List of team members updated; Typos corrected
Submitted: 2019-08-21, last modified: 2020-03-19
The goal of Project GAUSS is to return samples from the dwarf planet Ceres. Ceres is the most accessible ocean world candidate and the largest reservoir of water in the inner solar system. It shows active cryovolcanism and hydrothermal activities in recent history that resulted in minerals not found in any other planets to date except for Earth's upper crust. The possible occurrence of recent subsurface ocean on Ceres and the complex geochemistry suggest possible past habitability and even the potential for ongoing habitability. Aiming to answer a broad spectrum of questions about the origin and evolution of Ceres and its potential habitability, GAUSS will return samples from this possible ocean world for the first time. The project will address the following top-level scientific questions: 1) What is the origin of Ceres and the origin and transfer of water and other volatiles in the inner solar system? 2) What are the physical properties and internal structure of Ceres? What do they tell us about the evolutionary and aqueous alteration history of icy dwarf planets? 3) What are the astrobiological implications of Ceres? Was it habitable in the past and is it still today? 4) What are the mineralogical connections between Ceres and our current collections of primitive meteorites? GAUSS will first perform a high-resolution global remote sensing investigation, characterizing the geophysical and geochemical properties of Ceres. Candidate sampling sites will then be identified, and observation campaigns will be run for an in-depth assessment of the candidate sites. Once the sampling site is selected, a lander will be deployed on the surface to collect samples and return them to Earth in cryogenic conditions that preserves the volatile and organic composition as well as the original physical status as much as possible.
[2]  oai:arXiv.org:1807.10087  [pdf] - 1771626
Observations of meteors in the Earth's atmosphere: Reducing data from dedicated double-station wide-angle cameras
Comments:
Submitted: 2018-07-26
Meteoroids entering the Earth's atmosphere can be observed as meteors, thereby providing useful information on their formation and hence on their parent bodies. We developed a data reduction software package for double station meteor data from the SPOSH camera, which includes event detection, image geometric and radiometric calibration, radiant and speed estimates, trajectory and orbit determination, and meteor light curve recovery. The software package is designed to fully utilise the high photometric quality of SPOSH images. This will facilitate the detection of meteor streams and studies of their trajectories. We have run simulations to assess the performance of the software by estimating the radiants, speeds, and magnitudes of synthetic meteors and comparing them with the a priori values. The estimated uncertainties in radiant location had a zero mean with a median deviation between 0.03$^{\circ}$ and 0.11$^{\circ}$ for the right ascension and 0.02$^{\circ}$ and 0.07$^{\circ}$ for the declination. The estimated uncertainties for the speeds had a median deviation between 0.40 and 0.45 km s$^{-1}$. The brightness of synthetic meteors was estimated to within +0.01m. We have applied the software package to 177 real meteors acquired by the SPOSH camera. The median propagated uncertainties in geocentric right ascension and declination were found to be of 0.64$^{\circ}$ and 0.29$^{\circ}$, while the median propagated error in geocentric speed was 1.21 km $s^{-1}$.
[3]  oai:arXiv.org:1803.01511  [pdf] - 1650979
Science Objectives of the Ganymede Laser Altimeter (GALA) for the JUICE Mission
Comments: 10 pages, 6 figures, accepted for publication in Trans. JSASS Aerospace Tech. Japan
Submitted: 2018-03-05, last modified: 2018-03-15
Laser altimetry is a powerful tool for addressing the major objectives of planetary physics and geodesy, and have been applied in planetary explorations of the Moon, Mars, Mercury, and the asteroids Eros, and Itokawa. The JUpiter Icy Moons Explorer (JUICE), led by European Space Agency (ESA), has started development to explore the emergence of habitable worlds around gas giants. The Ganymede Laser Altimeter (GALA) will be the first laser altimeter for icy bodies, and will measure the shape and topography of the large icy moons of Jupiter, (globally for Ganymede, and using flyby ground-tracks for Europa and Callisto). Such information is crucial for understanding the formation of surface features and can tremendously improve our understanding of the icy tectonics. In addition, the GALA will infer the presence or absence of a subsurface ocean by measuring the tidal and rotational responses. Furthermore, it also improves the accuracy of gravity field measurements reflecting the interior structure, collaborating with the radio science experiment. In addition to range measurements, the signal strength and the waveform of the laser pulses reflected from the moon's surface contain information about surface reflectance at the laser wavelength and small scale roughness. Therefore we can infer the degrees of chemical and physical alterations, e.g., erosion, space weathering, compaction and deposition of exogenous materials, through GALA measurements without being affected by illumination conditions. JUICE spacecraft carries ten science payloads including GALA. They work closely together in a synergistic way with GALA being one of the key instruments for understanding the evolution of the icy satellites Ganymede, Europa, and Callisto.
[4]  oai:arXiv.org:1710.09686  [pdf] - 1724840
The reference frames of Mercury after MESSENGER
Comments:
Submitted: 2017-10-26
We report on recent refinements and the current status for the rotational state models and the reference frame of the planet Mercury. We summarize the performed measurements of Mercury rotation based on terrestrial radar observations as well as data from the Mariner 10 and the MESSENGER missions. Further, we describe the different available definitions of reference systems for Mercury, which are realized using data obtained by instruments on board MESSENGER. In particular, we discuss the dynamical frame, the principal-axes frame, the ellipsoid frame, as well as the cartographic frame. We also describe the reference frame adopted by the MESSENGER science team for the release of their cartographic products and we provide expressions for transformations from this frame to the other reference frames.
[5]  oai:arXiv.org:1608.08487  [pdf] - 1580181
Towards High-Resolution Mercury Global Topography from MESSENGER Orbital Stereo Imaging - A Prototype Model for the H6 Quadrangle "Kuiper"
Comments:
Submitted: 2016-08-30
We selected approximately 10,500 Narrow Angle Camera (NAC) and Wide-Angle Camera (WAC) stereo images obtained by the MESSENGER spacecraft during its orbital mission with average resolutions of 150 m/pixel to compute a Digital Terrain Model (DTM) for the so-called H6 quadrangle (Kuiper), extending between 22.5{\deg}S to 22.5{\deg}N and 288.0{\deg}E to 360.0{\deg}E. Among the images, we identified about 21,100 stereo image combinations with each combination consisting of at least 3 images. We applied sparse multi-image matching to derive approximately 250,000 tie-points representing 50,000 ground points. We used the tie-points to carry out a photogrammetric block adjustment, which improves the image pointing and the accuracy of (3D) ground points from about 850 m to approximately 55 m. Subsequently, we applied high density (pixel-by-pixel) multi-image matching to derive about 45 billion tie-points. Benefitting from improved image pointing data, we compute about 6.3 billion surface points. By interpolation, we generated a DEM with a lateral spacing of 221.7 m/pixel (192 pixels per degree) and a vertical accuracy of about 30 m. The comparison of the DEM with the Mercury Laser Altimeter (MLA) tracks obtained over 4 years of MESSENGER operation reveals that the DEM is geometrically very rigid. It may be used as a reference to identify MLA outliers (when MLA operating at ranging limit) or to map offsets of laser altimeter tracks, presumably caused by residual spacecraft orbit and attitude errors. After the relevant outlier removal and corrections, MLA profiles show excellent agreement with topographic profiles from H6 with root mean square height difference of only 88 m.
[6]  oai:arXiv.org:1506.00008  [pdf] - 1247093
Mercury's resonant rotation from secular orbital elements
Comments:
Submitted: 2015-05-29, last modified: 2015-07-15
We used recently produced Solar System ephemerides, which incorporate two years of ranging observations to the MESSENGER spacecraft, to extract the secular orbital elements for Mercury and associated uncertainties. As Mercury is in a stable 3:2 spin-orbit resonance these values constitute an important reference for the planet's measured rotational parameters, which in turn strongly bear on physical interpretation of Mercury's interior structure. In particular, we derive a mean orbital period of 87.96934962 $\pm$ 0.00000037 days and (assuming a perfect resonance) a spin rate of 6.138506839 $\pm$ 0.000000028 degree/day. The difference between this rotation rate and the currently adopted rotation rate (Archinal et al, 2011) corresponds to a longitudinal displacement of approx. 67 m per year at the equator. Moreover, we present a basic approach for the calculation of the orientation of the instantaneous Laplace and Cassini planes of Mercury. The analysis allows us to assess the uncertainties in physical parameters of the planet when derived from observations of Mercury's rotation.