We address the problem of the origin of massive stars, namely the origin, path and timescale of the mass flows that create them. Based on extensive numerical simulations, we propose a scenario where massive stars are assembled by large-scale, converging, inertial flows that naturally occur in supersonic turbulence. We refer to this scenario of massive-star formation as the {\it Inertial-Inflow Model}. This model stems directly from the idea that the mass distribution of stars is primarily the result of {\it turbulent fragmentation}. Under this hypothesis, the statistical properties of the turbulence determine the formation timescale and mass of prestellar cores, posing definite constraints on the formation mechanism of massive stars. We quantify such constraints by the analysis of a simulation of supernova-driven turbulence in a 250-pc region of the interstellar medium, describing the formation of hundreds of massive stars over a time of approximately 30 Myr. Due to the large size of our statistical sample, we can say with full confidence that {\it massive stars in general do not form from the collapse of massive cores, nor from competitive accretion}, as both models are incompatible with the numerical results. We also compute synthetic continuum observables in Herschel and ALMA bands. We find that, depending on the distance of the observed regions, estimates of core mass based on commonly-used methods may exceed the actual core masses by up to two orders of magnitude, and that there is essentially no correlation between estimated and real core masses.

We study density fluctuations in supersonic turbulence using both theoretical methods and numerical simulations. A theoretical formulation is developed for the probability distribution function (PDF) of the density at steady state, connecting it to the conditional statistics of the velocity divergence. Two sets of numerical simulations are carried out, using either a Riemann solver to evolve the Euler equations or a finite-difference method to evolve the Navier-Stokes (N-S) equations. After confirming the validity of our theoretical formulation with the N-S simulations, we examine the effects of dynamical processes on the PDF, showing that the nonlinear term in the divergence equation amplifies the right tail of the PDF and reduces the left one, the pressure term reduces both the right and left tails, and the viscosity term, counter-intuitively, broadens the right tail of the PDF. Despite the inaccuracy of the velocity divergence from the Riemann runs, as found in our previous work, we show that the density PDF from the Riemann runs is consistent with that from the N-S runs. Taking advantage of their much higher effective resolution, we then use the Riemann runs to study the dependence of the PDF on the Mach number, $\mathcal{M}$, up to $\mathcal{M}\sim30$. The PDF width, $\sigma_{s}$, follows the relation $\sigma_{s}^2 = \ln (1+b^2 {\mathcal M}^2)$, with $b\approx0.38$. However, the PDF exhibits a negative skewness that increases with increasing $\mathcal{M}$, so much of the growth of $\sigma_{s}$ is accounted for by the growth of the left PDF tail, while the growth of the right tail tends to saturate. Thus, the usual prescription that combines a lognormal shape with the standard variance-Mach number relation greatly overestimates the right PDF tail at large $\mathcal{M}$, which may have a significant impact on theoretical models of star formation.

We examine the accuracy of spatial derivatives computed from numerical simulations of supersonic turbulence. Two sets of simulations, carried out using a finite-volume code that evolves the hydrodynamic equations with an approximate Riemann solver and a finite-difference code that solves the Navier-Stokes equations, are tested against a number of criteria based on the continuity equation, including exact results at statistically steady state. We find that the spatial derivatives in the Navier-Stokes runs are accurate and satisfy all the criteria. In particular, they satisfy our exact results that the conditional mean velocity divergence, $\langle \nabla \cdot {\bs u}|s\rangle$, where $s$ is the logarithm of density, and the conditional mean of the advection of $s$, $\langle {\bs u} \cdot \nabla s|s\rangle$, vanish at steady state for all density values, $s$. On the other hand, the Riemann solver simulations fail all the tests that require accurate evaluation of spatial derivatives, resulting in apparent violation of the continuity equation, even if the solver enforces mass conservation. In particular, analysis of the Riemann simulations may lead to the incorrect conclusion that the $\pdv$ work tends to preferentially convert kinetic energy into thermal energy, inconsistent with the exact result that the energy exchange by $\pdv$ work is symmetric in barotropic supersonic turbulence at steady state. The inaccuracy of spatial derivatives is a general problem in the post-processing of simulations of supersonic turbulence with Riemann solvers. Solutions from such simulations must be used with caution in post-processing studies concerning the spatial gradients.

We investigate the effects of radiative energy transfer on a series of nested-grid, high-resolution hydrodynamic simulations of gas and particle dynamics in the vicinity of an Earth-mass planetary embryo. We include heating due to the accretion of solids and the subsequent convective motions. Using a constant embryo surface temperature, we show that radiative energy transport results in a tendency to reduce the entropy in the primordial atmosphere, but this tendency is alleviated by an increase in the strength of convective energy transport, triggered by a correspondingly increased super-adiabatic temperature gradient. As a consequence, the amplitude of the convective motions increase by roughly an order of magnitude in the vicinity of the embryo. In the cases investigated here, where the optical depth towards the disk surface is larger than unity, the reduction of the temperature in the outer parts of the Hill sphere relative to cases without radiative energy transport is only $\sim$100K, while the mass density increase is on the order of a factor of two in the inner parts of the Hill sphere. Our results demonstrate that, unless unrealistically low dust opacities are assumed, radiative cooling in the context of primordial rocky planet atmospheres can only become important after the disk surface density has dropped significantly below minimum-mass-solar-nebula values.

The probabilistic approach to turbulence is applied to investigate density fluctuations in supersonic turbulence. We derive kinetic equations for the probability distribution function (PDF) of the logarithm of the density field, $s$, in compressible turbulence in two forms: a first-order partial differential equation involving the average divergence conditioned on the flow density, $\langle \nabla \cdot {\bs u} | s\rangle$, and a Fokker-Planck equation with the drift and diffusion coefficients equal to $-\langle {\bs u} \cdot \nabla s | s\rangle$ and $\langle {\bs u} \cdot \nabla s | s\rangle$, respectively. Assuming statistical homogeneity only, the detailed balance at steady state leads to two exact results, $\langle \nabla \cdot {\bs u} | s \rangle =0$, and $\langle {\bs u} \cdot \nabla s | s\rangle=0$. The former indicates a balance of the flow divergence over all expanding and contracting regions at each given density. The exact results provide an objective criterion to judge the accuracy of numerical codes with respect to the density statistics in supersonic turbulence. We also present a method to estimate the effective numerical diffusion as a function of the flow density and discuss its effects on the shape of the density PDF.

We present nested-grid, high-resolution hydrodynamic simulations of gas and particle dynamics in the vicinity of Mars- to Earth-mass planetary embryos. The simulations extend from the surface of the embryos to a few vertical disk scale heights, with \rev{a spatial} dynamic range \rev{of} $\sim\! 1.4\times 10^5$. Our results confirm that "pebble"-sized particles are readily accreted, with accretion rates continuing to increase up to metre-size "boulders" for a 10\% MMSN surface density model. The gas mass flux in and out of the Hill sphere is consistent with the Hill rate, $\Sigma\Omega R_\mathrm{H}^2 = 4\, 10^{-3}$ M$_\oplus$ yr$^{-1}$. While smaller size particles mainly track the gas, a net accretion rate of $\approx 2\,10^{-5}$ M$_\oplus$ yr$^{-1}$ is reached for 0.3--1 cm particles, even though a significant fraction leaves the Hill sphere again. Effectively all pebble-sized particles that cross the Bondi sphere are accreted. The resolution of these simulations is sufficient to resolve accretion-driven convection. Convection driven by a nominal accretion rate of $10^{-6}$ M$_\oplus$ yr$^{-1}$ does not significantly alter the pebble accretion rate. We find that, due to cancellation effects, accretion rates of pebble-sized particles are nearly independent of disk surface density. As a result, we can estimate accurate growth times for specified particle sizes. For 0.3--1 cm size particles, the growth time from a small seed is $\sim$0.15 million years for an Earth mass planet at 1 AU and $\sim$0.1 million years for a Mars mass planet at 1.5 AU.

We describe a simple and effective algorithm for solving Poisson's equation in the context of self-gravity within the DISPATCH astrophysical fluid framework. The algorithm leverages the fact that DISPATCH stores multiple time slices and uses asynchronous time-stepping to produce a scheme that does not require any explicit global communication or sub-cycling, only the normal, local communication between patches and the iterative solution to Poisson's equation. We demonstrate that the implementation is suitable for both collections of patches of a single resolution and for hierarchies of adaptively resolved patches. Benchmarks are presented that demonstrate the accuracy, effectiveness and efficiency of the scheme.

We introduce a high-performance simulation framework that permits the semi-independent, task-based solution of sets of partial differential equations, typically manifesting as updates to a collection of `patches' in space-time. A hybrid MPI/OpenMP execution model is adopted, where work tasks are controlled by a rank-local `dispatcher' which selects, from a set of tasks generally much larger than the number of physical cores (or hardware threads), tasks that are ready for updating. The definition of a task can vary, for example, with some solving the equations of ideal magnetohydrodynamics (MHD), others non-ideal MHD, radiative transfer, or particle motion, and yet others applying particle-in-cell (PIC) methods. Tasks do not have to be grid-based, while tasks that are, may use either Cartesian or orthogonal curvilinear meshes. Patches may be stationary or moving. Mesh refinement can be static or dynamic. A feature of decisive importance for the overall performance of the framework is that time steps are determined and applied locally; this allows potentially large reductions in the total number of updates required in cases when the signal speed varies greatly across the computational domain, and therefore a corresponding reduction in computing time. Another feature is a load balancing algorithm that operates `locally' and aims to simultaneously minimise load and communication imbalance. The framework generally relies on already existing solvers, whose performance is augmented when run under the framework, due to more efficient cache usage, vectorisation, local time-stepping, plus near-linear and, in principle, unlimited OpenMP and MPI scaling.

We present an abundance analysis of the low-metallicity benchmark red giant star HD 122563 based on realistic, state-of-the-art, high-resolution, three-dimensional (3D) model stellar atmospheres including non-grey radiative transfer through opacity binning with four, twelve, and 48 bins. The 48-bin 3D simulation reaches temperatures lower by ~ 300 - 500 K than the corresponding 1D model in the upper atmosphere. Small variations in the opacity binning, adopted line opacities, or chemical mixture can cool the photospheric layers by a further ~ 100 - 300 K and alter the effective temperature by ~ 100 K. A 3D local thermodynamic equilibrium (LTE) spectroscopic analysis of Fe I and Fe II lines gives discrepant results in terms of derived Fe abundance, which we ascribe to non-LTE effects and systematic errors on the stellar parameters. We also determine C, N, and O abundances by simultaneously fitting CH, OH, NH, and CN molecular bands and lines in the ultraviolet, visible, and infrared. We find a small positive 3D-1D abundance correction for carbon (+0.03 dex) and negative ones for nitrogen (-0.07 dex) and oxygen (-0.34 dex). From the analysis of the [O I] line at 6300.3 {\AA}, we derive a significantly higher oxygen abundance than from molecular lines (+0.46 dex in 3D and +0.15 dex in 1D). We rule out important OH photodissociation effects as possible explanation for the discrepancy and note that lowering the surface gravity would reduce the oxygen abundance difference between molecular and atomic indicators.

Stars and their corresponding protoplanetary disks form in diverse environments. To account for these natural variations, we investigate the formation process around nine solar mass stars with a maximum resolution of 2 AU in a Giant Molecular Cloud of (40 pc)$^3$ in volume by using the adaptive mesh refinement code \ramses. The magnetohydrodynamic simulations reveal that the accretion process is heterogeneous in time, in space, and among protostars of otherwise similar mass. During the first roughly 100 kyr of a protostar evolving to about a solar mass, the accretion rates peak around $10^{-5}$ to $10^{-4}$ M$_{\odot}$ yr$^{-1}$ shortly after its birth, declining with time after that. The different environments also affect the spatial accretion, and infall of material to the star-disk system is mostly through filaments and sheets. Furthermore, the formation and evolution of disks varies significantly from star to star. We interpret the variety in disk formation as a consequence of the differences in the combined effects of magnetic fields and turbulence that may cause differences in the efficiency of magnetic braking, as well as differences in the strength and distribution of specific angular momentum.

The most abundant components of primitive meteorites (chondrites) are millimeter-sized glassy spherical chondrules formed by transient melting events in the solar protoplanetary disk. Using Pb-Pb dates of 22 individual chondrules, we show that primary production of chondrules in the early solar system was restricted to the first million years after formation of the Sun and that these existing chondrules were recycled for the remaining lifetime of the protoplanetary disk. This is consistent with a primary chondrule formation episode during the early high-mass accretion phase of the protoplanetary disk that transitions into a longer period of chondrule reworking. An abundance of chondrules at early times provides the precursor material required to drive the efficient and rapid formation of planetary objects via chondrule accretion.

We investigate the formation of protoplanetary disks around nine solar mass stars formed in the context of a (40 pc)$^3$ Giant Molecular Cloud model, using RAMSES adaptive-mesh refinement simulations extending over a scale range of about 4 million, from an outer scale of 40 pc down to cell sizes of 2 AU. Our most important result is that the accretion process is heterogeneous in multiple ways; in time, in space, and among protostars of otherwise similar mass. Accretion is heterogeneous in time, in the sense that accretion rates vary during the evolution, with generally decreasing profiles, whose slopes vary over a wide range, and where accretion can increase again if a protostar enters a region with increased density and low speed. Accretion is heterogeneous in space, because of the mass distribution, with mass approaching the accreting star-disk system in filaments and sheets. Finally, accretion is heterogeneous among stars, since the detailed conditions and dynamics in the neighborhood of each star can vary widely. We also investigate the sensitivity of disk formation to physical conditions, and test their robustness by varying numerical parameters. We find that disk formation is robust even when choosing the least favorable sink particle parameters, and that turbulence cascading from larger scales is a decisive factor in disk formation. We also investigate the transport of angular momentum, finding that the net inward mechanical transport is compensated for mainly by an outward directed magnetic transport, with a contribution from gravitational torques usually subordinate to the magnetic transport.

We compute the star formation rate (SFR) in molecular clouds (MCs) that originate {\it ab initio} in a new, higher-resolution simulation of supernova-driven turbulence. Because of the large number of well-resolved clouds with self-consistent boundary and initial conditions, we obtain a large range of cloud physical parameters with realistic statistical distributions, an unprecedented sample of star-forming regions to test SFR models and to interpret observational surveys. We confirm the dependence of the SFR per free-fall time, $SFR_{\rm ff}$, on the virial parameter, $\alpha_{\rm vir}$, found in previous simulations, and compare a revised version of our turbulent fragmentation model with the numerical results. The dependences on Mach number, ${\cal M}$, gas to magnetic pressure ratio, $\beta$, and compressive to solenoidal power ratio, $\chi$ at fixed $\alpha_{\rm vir}$ are not well constrained, because of random scatter due to time and cloud-to-cloud variations in $SFR_{\rm ff}$. We find that $SFR_{\rm ff}$ in MCs can take any value in the range $0 \le SFR_{\rm ff} \lesssim 0.2$, and its probability distribution peaks at a value $SFR_{\rm ff}\approx 0.025$, consistent with observations. The values of $SFR_{\rm ff}$ and the scatter in the $SFR_{\rm ff}$--$\alpha_{\rm vir}$ relation are consistent with recent measurements in nearby MCs and in clouds near the Galactic center. Although not explicitly modeled by the theory, the scatter is consistent with the physical assumptions of our revised model and may also result in part from a lack of statistical equilibrium of the turbulence, due to the transient nature of MCs.

We study the interaction of relativistic jets with their environment, using 3-dimensional relativistic particle-in-cell simulations for two cases of jet composition: (i) electron-proton ($e^{-}-p^{+}$) and (ii) electron-positron ($e^{\pm}$) plasmas containing helical magnetic fields. We have performed simulations of "global" jets containing helical magnetic fields in order to examine how helical magnetic fields affect kinetic instabilities such as the Weibel instability, the kinetic Kelvin-Helmholtz instability and the Mushroom instability. We have found that these kinetic instabilities are suppressed and new types of instabilities can grow. For the $e^{-}-p^{+}$ jet, a recollimation-like instability occurs and jet electrons are strongly perturbed, whereas for the $e^{\pm}$ jet, a recollimation-like instability occurs at early times followed by kinetic instability and the general structure is similar to a simulation without a helical magnetic field. We plan to perform further simulations using much larger systems to confirm these new findings.

We present a comparison of molecular clouds (MCs) from a simulation of supernova-driven interstellar medium (ISM) turbulence with real MCs from the Outer Galaxy Survey. The radiative transfer calculations to compute synthetic CO spectra are carried out assuming the CO relative abundance depends only on gas density, according to four different models. Synthetic MCs are selected above a threshold brightness temperature value, $T_{\rm B,min}=1.4$ K, of the $J=1-0$ $^{12}$CO line, generating 16 synthetic catalogs (four different spatial resolutions and four CO abundance models), each containing up to several thousands MCs. The comparison with the observations focuses on the mass and size distributions and on the velocity-size and mass-size Larson relations. The mass and size distributions are found to be consistent with the observations, with no significant variations with spatial resolution or chemical model, except in the case of the unrealistic model with constant CO abundance. The velocity-size relation is slightly too steep for some of the models, while the mass-size relation is a bit too shallow for all models only at a spatial resolution $dx\approx 1$ pc. The normalizations of the Larson relations show a clear dependence on spatial resolution, for both the synthetic and the real MCs. The comparison of the velocity-size normalization suggests that the SN rate in the Perseus arm is approximately 70\% or less of the rate adopted in the simulation. Overall, the realistic properties of the synthetic clouds confirm that supernova-driven turbulence can explain the origin and dynamics of MCs.

We investigate the role of mass infall in the formation and evolution of protostars. To avoid ad hoc initial and boundary conditions, we consider the infall resulting self-consistently from modeling the formation of stellar clusters in turbulent molecular clouds. We show that infall rates in turbulent clouds are comparable to accretion rates inferred from protostellar luminosities or measured in pre-main-sequence stars. They should not be neglected in modeling the luminosity of protostars and the evolution of disks, even after the embedded protostellar phase. We find large variations of infall rates from protostar to protostar, and large fluctuations during the evolution of individuals protostars. In most cases, the infall rate is initially of order 10$^{-5}$\msun\ yr$^{-1}$, and may either decay rapidly in the formation of low-mass stars, or remain relatively large when more massive stars are formed. The simulation reproduces well the observed characteristic values and scatter of protostellar luminosities and matches the observed protostellar luminosity function. The luminosity problem is therefore solved once realistic protostellar infall histories are accounted for, with no need for extreme accretion episodes. These results are based on a simulation of randomly-driven magneto-hydrodynamic turbulence on a scale of 4pc, including self-gravity, adaptive-mesh refinement to a resolution of 50AU, and accreting sink particles. The simulation yields a low star formation rate, consistent with the observations, and a mass distribution of sink particles consistent with the observed stellar initial mass function during the whole duration of the simulation, forming nearly 1,300 sink particles over 3.2 Myr.

We perform a calibration of the mixing length of convection in stellar structure models against realistic 3D radiation-coupled hydrodynamics (RHD) simulations of convection in stellar surface layers, determining the adiabat deep in convective stellar envelopes. The mixing-length parameter $\alpha$ is calibrated by matching averages of the 3D simulations to 1D stellar envelope models, ensuring identical atomic physics in the two cases. This is done for a previously published grid of solar-metallicity convection simulations, covering from 4200 K to 6900 K on the main sequence, and 4300-5000 K for giants with logg=2.2. Our calibration results in an $\alpha$ varying from 1.6 for the warmest dwarf, which is just cool enough to admit a convective envelope, and up to 2.05 for the coolest dwarfs in our grid. In between these is a triangular plateau of $\alpha$ ~ 1.76. The Sun is located on this plateau and has seen little change during its evolution so far. When stars ascend the giant branch, they largely do so along tracks of constant $\alpha$, with $\alpha$ decreasing with increasing mass.

Relations between temperature, T, and optical depth, tau, are often used for describing the photospheric transition from optically thick to optically thin in stellar structure models. We show that this is well justified, but also that currently used T(tau) relations are often inconsistent with their implementation. As an outer boundary condition on the system of stellar structure equations, T(tau) relations have an undue effect on the overall structure of stars. In this age of precision asteroseismology, we need to re-assess both the method for computing and for implementing T(tau) relations, and the assumptions they rest on. We develop a formulation for proper and consistent evaluation of T(tau) relations from arbitrary 1D or 3D stellar atmospheres, and for their implementation in stellar structure and evolution models. We extract radiative T(tau) relations, as described by our new formulation, from 3D simulations of convection in deep stellar atmospheres of late-type stars from dwarfs to giants. These simulations employ realistic opacities and equation of state, and account for line-blanketing. For comparison, we also extract T(tau) relations from 1D MARCS model atmospheres using the same formulation. T(tau)-relations from our grid of 3D convection simulations display a larger range of behaviours with surface gravity, compared with those of conventional theoretical 1D hydrostatic atmosphere models. Based on this, we recommend no longer to use scaled solar T(tau) relations. Files with T(tau) relations for our grid of simulations are made available to the community, together with routines for interpolating in this irregular grid. We also provide matching tables of atmospheric opacity, for consistent implementation in stellar structure models.

We review recent advances in the analytical and numerical modeling of the star formation rate in molecular clouds and discuss the available observational constraints. We focus on molecular clouds as the fundamental star formation sites, rather than on the larger-scale processes that form the clouds and set their properties. Molecular clouds are shaped into a complex filamentary structure by supersonic turbulence, with only a small fraction of the cloud mass channeled into collapsing protostars over a free-fall time of the system. In recent years, the physics of supersonic turbulence has been widely explored with computer simulations, leading to statistical models of this fragmentation process, and to the prediction of the star formation rate as a function of fundamental physical parameters of molecular clouds, such as the virial parameter, the rms Mach number, the compressive fraction of the turbulence driver, and the ratio of gas to magnetic pressure. Infrared space telescopes, as well as ground-based observatories have provided unprecedented probes of the filamentary structure of molecular clouds and the location of forming stars within them.

The nonlinear evolution of collisionless plasmas is typically a multi-scale process where the energy is injected at large, fluid scales and dissipated at small, kinetic scales. Accurately modelling the global evolution requires to take into account the main micro-scale physical processes of interest. This is why comparison of different plasma models is today an imperative task aiming at understanding cross-scale processes in plasmas. We report here the first comparative study of the evolution of a magnetized shear flow, through a variety of different plasma models by using magnetohydrodynamic, Hall-MHD, two-fluid, hybrid kinetic and full kinetic codes. Kinetic relaxation effects are discussed to emphasize the need for kinetic equilibriums to study the dynamics of collisionless plasmas in non trivial configurations. Discrepancies between models are studied both in the linear and in the nonlinear regime of the magnetized Kelvin-Helmholtz instability, to highlight the effects of small scale processes on the nonlinear evolution of collisionless plasmas. We illustrate how the evolution of a magnetized shear flow depends on the relative orientation of the fluid vorticity with respect to the magnetic field direction during the linear evolution when kinetic effects are taken into account. Even if we found that small scale processes differ between the different models, we show that the feedback from small, kinetic scales to large, fluid scales is negligable in the nonlinear regime. This study show that the kinetic modeling validates the use of a fluid approach at large scales, which encourages the development and use of fluid codes to study the nonlinear evolution of magnetized fluid flows, even in the colisionless regime.

We present the Stagger-grid, a comprehensive grid of time-dependent, 3D hydrodynamic model atmospheres for late-type stars with realistic treatment of radiative transfer, covering a wide range in stellar parameters. This grid of 3D models is intended for various applications like stellar spectroscopy, asteroseismology and the study of stellar convection. In this introductory paper, we describe the methods used for the computation of the grid and discuss the general properties of the 3D models as well as their temporal and spatial averages (<3D>). All our models were generated with the Stagger-code, using realistic input physics for the equation of state (EOS) and for continuous and line opacities. Our ~220 grid models range in Teff from 4000 to 7000K in steps of 500K, in log g from 1.5 to 5.0 in steps of 0.5 dex, and [Fe/H] from -4.0 to +0.5 in steps of 0.5 and 1.0 dex. We find a tight scaling relation between the vertical velocity and the surface entropy jump, which itself correlates with the constant entropy value of the adiabatic convection zone. The range in intensity contrast is enhanced at lower metallicity. The granule size correlates closely with the pressure scale height sampled at the depth of maximum velocity. We compare the <3D> models with widely applied 1D models, as well as with theoretical 1D hydrostatic models generated with the same EOS and opacity tables as the 3D models, in order to isolate the effects of using self-consistent and hydrodynamic modeling of convection, rather than the classical mixing length theory approach. For the first time, we are able to quantify systematically over a broad range of stellar parameters the uncertainties of 1D models arising from the simplified treatment of physics, in particular convective energy transport. In agreement with previous findings, we find that the differences can be significant, especially for metal-poor stars.

The primary focus of this paper is on the particle acceleration mechanism in solar coronal three-dimensional reconnection null-point regions. Starting from a potential field extrapolation of a Solar and Heliospheric Observatory (SOHO) magnetogram taken on 2002 November 16, we first performed magnetohydrodynamics (MHD) simulations with horizontal motions observed by SOHO applied to the photospheric boundary of the computational box. After a build-up of electric current in the fan-plane of the null-point, a sub-section of the evolved MHD data was used as initial and boundary conditions for a kinetic particle-in-cell model of the plasma. We find that sub-relativistic electron acceleration is mainly driven by a systematic electric field in the current sheet. A non-thermal population of electrons with a power-law distribution in energy forms in the simulated pre-flare phase, featuring a power-law index of about -1.78. This work provides a first step towards bridging the gap between macroscopic scales on the order of hundreds of Mm and kinetic scales on the order of cm in the solar corona, and explains how to achieve such a cross-scale coupling by utilizing either physical modifications or (equivalent) modifications of the constants of nature. With their exceptionally high resolution - up to 135 billion particles and 3.5 billion grid cells of size 17.5 km - these simulations offer a new opportunity to study particle acceleration in solar-like settings.

Present grids of stellar atmosphere models are the workhorses in interpreting stellar observations, and determining their fundamental parameters. These models rely on greatly simplified models of convection, however, lending less predictive power to such models of late type stars. We present a grid of improved and more reliable stellar atmosphere models of late type stars, based on deep, 3D, convective, stellar atmosphere simulations. This grid is to be used in general for interpreting observations, and improve stellar and asteroseismic modeling. We solve the Navier Stokes equations in 3D and concurrent with the radiative transfer equation, for a range of atmospheric parameters, covering most of stellar evolution with convection at the surface. We emphasize use of the best available atomic physics for quantitative predictions and comparisons with observations. We present granulation size, convective expansion of the acoustic cavity, asymptotic adiabat, as function of atmospheric parameters. These and other results are also available in electronic form.

We investigate electron acceleration resulting from 3D magnetic reconnection between an emerging, twisted magnetic flux rope and a pre-existing weak, open magnetic field. We first follow the rise of an unstable, twisted flux tube with a resistive MHD simulation where the numerical resolution is enhanced by using fixed mesh refinement. As in previous MHD investigations of similar situations, the rise of the flux tube into the pre-existing inclined coronal magnetic field results in the formation of a solar coronal jet. A snapshot of the MHD model is then used as an initial and boundary condition for a particle-in-cell simulation, using up to half a billion cells and over 20 billion charged particles. Particle acceleration occurs mainly in the reconnection current sheet, with accelerated electrons displaying a power law in the energy probability distribution with an index of around -1.5. The main acceleration mechanism is a systematic electric field, striving to maintaining the electric current in the current sheet against losses caused by electrons not being able to stay in the current sheet for more than a few seconds at a time.

Numerical MHD simulations of 3D reconnection events in the solar corona have improved enormously over the last few years, not only in resolution, but also in their complexity, enabling more and more realistic modeling. Various ways to obtain the initial magnetic field, different forms of solar atmospheric models as well as diverse driving speeds and patterns have been employed. This study considers differences between simulations with stratified and non-stratified solar atmospheres, addresses the influence of the driving speed on the plasma flow and energetics, and provides quantitative formulas for mapping electric fields and dissipation levels obtained in numerical simulations to the corresponding solar quantities. The simulations start out from a potential magnetic field containing a null-point, obtained from a Solar and Heliospheric Observatory (SOHO) magnetogram extrapolation approximately 8 hours before a C-class flare was observed. The magnetic field is stressed with a boundary motion pattern similar to - although simpler than - horizontal motions observed by SOHO during the period preceding the flare. The general behavior is nearly independent of the driving speed, and is also very similar in stratified and non-stratified models, provided only that the boundary motions are slow enough. The boundary motions cause a build-up of current sheets, mainly in the fan-plane of the magnetic null-point, but do not result in a flare-like energy release. The additional free energy required for the flare could have been partly present in non-potential form in the initial state, with subsequent additions from magnetic flux emergence or from components of the boundary motion that were not represented by the idealized driving pattern.

We investigate the impact on Fe abundance determination of including magnetic flux in series of 3D radiation-MHD simulations of solar convection which we used to synthesize spectral intensity profiles corresponding to disc centre. A differential approach is used to quantify the changes in theoretical equivalent width of a set of 28 iron spectral lines spanning a wide range in lambda, excitation potential, oscillator strength, Land\'e factor, and formation height. The lines were computed in LTE using the spectral synthesis code LILIA. We used input magnetoconvection snapshots covering 50 minutes of solar evolution and belonging to series having an average vertical magnetic flux density of 0, 50, 100 and 200 G. For the relevant calculations we used the Copenhagen Stagger code. The presence of magnetic fields causes both a direct (Zeeman-broadening) effect on spectral lines with non-zero Land\'e factor and an indirect effect on temperature-sensitive lines via a change in the photospheric T-tau stratification. The corresponding correction in the estimated atomic abundance ranges from a few hundredths of a dex up to |Delta log(Fe)| ~ 0.15 dex, depending on the spectral line and on the amount of average magnetic flux within the range of values we considered. The Zeeman-broadening effect gains relatively more importance in the IR. The largest modification to previous solar abundance determinations based on visible spectral lines is instead due to the indirect effect, i.e., the line-weakening caused by a warmer stratification on an optical depth scale. Our results indicate that the average solar iron abundance obtained when using magnetoconvection models can be 0.03-0.11 dex higher than when using the simpler HD convection approach. We demonstrate that accounting for magnetic flux is important in state-of-the-art solar photospheric abundance determinations based on 3D simulations.

Magneto-convection can produce an active region without an initial coherent flux tube. A simulation was performed where uniform, untwisted, horizontal magnetic field of 1 kG strenght was advected into the bottom of a computational domain 48 Mm wide by 20 Mm deep. The up and down convective motions produce a hierarchy of magnetic loops with a wide range of scales, with smaller loops riding "piggy back" in a serpentine fashion on larger loops. When a large loop approaches the surface it produces an small active region with a compact leading spot and more diffuse following spots.

We investigate the effects of coherent isotropic continuum scattering on the formation of spectral lines in local thermodynamic equilibrium (LTE) using 3D hydrodynamical and 1D hydrostatic model atmospheres of red giant stars. Continuum flux levels, spectral line profiles and curves of growth for different species are compared with calculations that treat scattering as absorption. Photons may escape from deeper, hotter layers through scattering, resulting in significantly higher continuum flux levels beneath a wavelength of 5000 A. The magnitude of the effect is determined by the importance of scattering opacity with respect to absorption opacity; we observe the largest changes in continuum flux at the shortest wavelengths and lowest metallicities; intergranular lanes of 3D models are more strongly affected than granules. Continuum scattering acts to increase the profile depth of LTE lines: continua gain more brightness than line cores due to their larger thermalization depth in hotter layers. We thus observe the strongest changes in line depth for high-excitation species and ionized species, which contribute significantly to photon thermalization through their absorption opacity near the continuum optical surface. Scattering desaturates the line profiles, leading to larger abundance corrections for stronger lines, which reach -0.5 dex at 3000 A for Fe II lines in 3D with excitation potential 2 eV at [Fe/H]=-3.0. The corrections are less severe for low-excitation lines, longer wavelengths, and higher metallicity. Velocity fields increase the effects of scattering by separating emission from granules and intergranular lanes in wavelength. 1D calculations exhibit similar scattering abundance corrections for weak lines, but those for strong lines are generally smaller compared to 3D models and depend on the choice of microturbulence.

The emergence of minimally structured (uniform and horizontal) magnetic field from a depth of 20 Mm has been simulated. The field emerges first in a mixed polarity pepper and salt pattern, but then collects into separate, unipolar concentrations and produces pores. The field strength was then artificially increased to produce spot-like structures. The field strength at continuum optical depth unity peaks at 1 kG, with a maximum of 4 kG. Where the vertical field is strong, the spots persist (at present an hour of solar time has been simulated). Where the field is weak, the spot gets filled in and disappears. Stokes profiles have been calculated and processed with the Hinode annular mtf, the slit diffraction and frequency smoothing. These data are available at steinr.pa.msu.edu/~bob/stokes.

Three-dimensional (3D) radiative hydrodynamic model atmospheres of metal-poor late-type stars are characterized by cooler upper photospheric layers than their 1D counterparts. This property of 3D models can dramatically affect elemental abundances derived from temperature-sensitive spectral lines. We investigate whether the cool surface temperatures predicted by metal-poor 3D models can be ascribed to the approximated treatment of scattering in the radiative transfer. We use the Bifrost code to test three different ways to handle scattering in 3D model atmospheres of metal-poor stars. First, we solve self-consistently the radiative transfer equation for a source function with a coherent scattering term. Second, we solve the radiative transfer equation for a Planckian source function, neglecting the contribution of continuum scattering to extinction in the optically thin layers; this has been the default mode in previous models of ours. Third, we treat scattering as pure absorption everywhere, which is the standard case in CO5BOLD models. We find that the second approach produces temperature structures with cool upper photospheric layers very similar to the correct coherent scattering solution. In contrast, treating scattering as pure absorption leads to significantly hotter and shallower temperature stratifications. The main differences in temperature structure between our published models and those generated with the CO5BOLD code can be traced to the different treatments of scattering. Neglecting the contribution of continuum scattering to extinction in optically thin layers provides a good approximation to the full radiative transfer solution for metal-poor stars. Our results demonstrate that the cool temperature stratifications predicted for metal-poor late-type stellar atmospheres by previous models of ours are not an artifact of the approximated treatment of scattering.

We explore the effect of the magnetic field when using realistic three-dimensional convection experiments to determine solar element abundances. By carrying out magnetoconvection simulations with a radiation-hydro code (the Copenhagen stagger code) and through a-posteriori spectral synthesis of three Fe I lines, we obtain evidence that moderate amounts of mean magnetic flux cause a noticeable change in the derived equivalent widths compared with those for a non-magnetic case. The corresponding Fe abundance correction for a mean flux density of 200 G reaches up to ~0.1 dex in magnitude. These results are based on space- and time-averaged line profiles over a time span of 2.5 solar hours in the statistically stationary regime of the convection. The main factors causing the change in equivalent widths, namely the Zeeman broadening and the modification of the temperature stratification, act in different amounts and, for the iron lines considered here, in opposite directions; yet, the resulting $|\Delta\log\epsilon_{\odot}(Fe)|$ coincides within a factor two in all of them, even though the sign of the total abundance correction is different for the visible and infrared lines. We conclude that magnetic effects should be taken into account when discussing precise values of the solar and stellar abundances and that an extended study is warranted.

We simulate the rise through the upper convection zone and emergence through the solar surface of initially uniform, untwisted, horizontal magnetic flux with the same entropy as the non-magnetic plasma that is advected into a domain 48 Mm wide from from 20 Mm deep. The magnetic field is advected upward by the diverging upflows and pulled down in the downdrafts, which produces a hierarchy of loop like structures of increasingly smaller scale as the surface is approached. There are significant differences between the behavior of fields of 10 kG and 20 or 40 kG strength at 20 Mm depth. The 10 kG fields have little effect on the convective flows and show little magnetic buoyancy effects, reaching the surface in the typical fluid rise time from 20 Mm depth of 32 hours. 20 and 40 kG fields significantly modify the convective flows, leading to long thin cells of ascending fluid aligned with the magnetic field and their magnetic buoyancy makes them rise to the surface faster than the fluid rise time. The 20 kG field produces a large scale magnetic loop that as it emerges through the surface leads to the formation of a bipolar pore-like structure.

Recent measurements of the Zeeman effect in dark-cloud cores provide important tests for theories of cloud dynamics and prestellar core formation. In this Letter we report results of simulated Zeeman measurements, based on radiative transfer calculations through a snapshot of a simulation of supersonic and super-Alfv\'enic turbulence. We have previously shown that the same simulation yields a relative mass-to-flux ratio (core versus envelope) in agreement with the observations (and in contradiction with the ambipolar-drift model of core formation). Here we show that the mass-to-flux and turbulent-to-magnetic-energy ratios in the simulated cores agree with observed values as well. The mean magnetic field strength in the simulation is very low, \bar{B}=0.34 \muG, presumably lower than the mean field in molecular clouds. Nonetheless, high magnetic field values are found in dense cores, in agreement with the observations (the rms field, amplified by the turbulence, is B_{rms}=3.05 \muG). We conclude that a strong large-scale mean magnetic field is not required by Zeeman effect measurements to date, although it is not ruled out by this work.

The atmosphere of the Sun is characterized by a complex interplay of competing physical processes: convection, radiation, conduction, and magnetic fields. The most obvious imprint of the solar convection and its overshooting in the low atmosphere is the granulation pattern. Beside this dominating scale there is a more or less smooth distribution of spatial scales, both towards smaller and larger scales, making the Sun essentially a multi-scale object. Convection and overshooting give the photosphere its face but also act as drivers for the layers above, namely the chromosphere and corona. The magnetic field configuration effectively couples the atmospheric layers on a multitude of spatial scales, for instance in the form of loops that are anchored in the convection zone and continue through the atmosphere up into the chromosphere and corona. The magnetic field is also an important structuring agent for the small, granulation-size scales, although (hydrodynamic) shock waves also play an important role -- especially in the internetwork atmosphere where mostly weak fields prevail. Based on recent results from observations and numerical simulations, we attempt to present a comprehensive picture of the atmosphere of the quiet Sun as a highly intermittent and dynamic system.

We present synthetic OH Zeeman splitting measurements of a super-Alfvenic model of molecular clouds. We select dense cores from synthetic 13CO maps computed from the largest simulation to date of supersonic and super-Alfvenic turbulence. The synthetic Zeeman splitting measurements in the cores yield a relation between the magnetic field strength, B, and the column density, N, in good agreement with the observations. The large scatter in B at a fixed value of N is partly due to intrinsic variations in the magnetic field strength from core to core. We also compute the relative mass-to-flux ratio between the center of the cores and their envelopes, ${\cal R}_{\mu}$, and show that super-Alfvenic turbulence produces a significant scatter also in ${\cal R}_{\mu}$, including negative values (field reversal between core center and envelope). We find ${\cal R}_{\mu}<1$ for 70% of the cores, and ${\cal R}_{\mu}<0$ for 12%. Of the cores with $|B_{\rm LOS}|>10$ \muG, 81% have ${\cal R}_{\mu}<1$. These predictions of the super-Alfvenic model are in stark contrast to the ambipolar drift model of core formation, where only ${\cal R}_{\mu}>1$ is allowed.

We perform helioseismic holography on realistic solar convection simulations and compare the observed travel-time perturbations with the expected travel times from the horizontal flows in the simulations computed from forward models under the assumption of the Born approximation. We demonstrate reasonable agreement between the observed and model travel times which reinforces the validity of helioseismic holography in the detection of subsurface horizontal flows. From the variation of the signal-to-noise ratio with depth, we conclude that the helioseismic detection of individual flow structures with spatial scales of supergranulation or smaller is not possible for depths below about 5 Mm below the surface over time scales less than a day. Approximately half of the observed signal originates within the first 2 Mm below the surface. A consequence of this is a rapid decrease (and reversal in some cases) of the travel-time perturbations with depth due to the contribution to the measurements of oppositely directed surface flows in neighboring convective cells. This confirms an earlier interpretation of similar effects reported from observations.

We apply time-distance helioseismology, local correlation tracking and Fourier spatial-temporal filtering methods to realistic supergranule scale simulations of solar convection and compare the results with high-resolution observations from the SOHO Michelson Doppler Imager (MDI). Our objective is to investigate the surface and sub-surface convective structures and test helioseismic measurements. The size and grid of the computational domain are sufficient to resolve various convective scales from granulation to supergranulation. The spatial velocity spectrum is approximately a power law for scales larger than granules, with a continuous decrease in velocity amplitude with increasing size. Aside from granulation no special scales exist, although a small enhancement in power at supergranulation scales can be seen. We calculate the time-distance diagram for f- and p-modes and show that it is consistent with the SOHO/MDI observations. From the simulation data we calculate travel time maps for surface gravity waves (f-mode). We also apply correlation tracking to the simulated vertical velocity in the photosphere to calculate the corresponding horizontal flows. We compare both of these to the actual large-scale (filtered) simulation velocities. All three methods reveal similar large scale convective patterns and provide an initial test of time-distance methods.

Recent progress in realistic simulations of solar convection have given us an unprecedented opportunity to evaluate the robustness of solar interior structures and dynamics obtained by methods of local helioseismology. We present results of testing the time-distance method using realistic simulations. By computing acoustic wave propagation time and distance relations for different depths of the simulated data, we confirm that acoustic waves propagate into the interior and then turn back to the photosphere. This demonstrates that in the numerical simulations properties of acoustic waves (p-modes) are similar to the solar conditions, and that these properties can be analyzed by the time-distance technique. For the surface gravity waves (f-mode), we calculate perturbations of their travel times, caused by localized downdrafts, and demonstrate that the spatial pattern of these perturbations (representing so-called sensitivity kernels) is similar to the patterns obtained from the real Sun, displaying characteristic hyperbolic structures. We then test the time-distance measurements and inversions by calculating acoustic travel times from a sequence of vertical velocities at the photosphere of the simulated data, and inferring a mean 3D flow fields by performing inversion based on the ray approximation. The inverted horizontal flow fields agree very well with the simulated data in subsurface areas up to 3 Mm deep, but differ in deeper areas. Due to the cross-talk effects between the horizontal divergence and downward flows, the inverted vertical velocities are significantly different from the mean convection velocities of the simulation dataset.

The radiation from afterglows of gamma-ray bursts is generated in the collisionless plasma shock interface between a relativistic outflow and a quiescent circum-burst medium. The two main ingredients responsible for the radiation are high-energy, non-thermal electrons and a strong magnetic field. In this Letter we present, for the first time, synthetic spectra extracted directly from first principles particle-in-cell simulations of relativist collisionless plasma shocks. The spectra are generated by a numerical Fourier transformation of the electrical far-field from each of a large number of particles, sampled directly from the particle-in-cell simulations. Both the electromagnetic field and the non-thermal particle acceleration are self-consistent products of the Weibel two-stream instability. We find that the radiation spectrum from a $\Gamma=15$ shock simulation show great resemblance with observed GRB spectra -- we compare specifically with that of GRB000301C.

The outflows from gamma ray bursts, active galactic nuclei and relativistic jets in general interact with the surrounding media through collisionless shocks. With three dimensional relativistic particle-in-cell simulations we investigate such shocks. The results from these experiments show that small--scale magnetic filaments with strengths of up to percents of equipartition are generated and that electrons are accelerated to power law distributions N(E)~E^{-p} in the vicinity of the filaments through a new acceleration mechanism. The acceleration is locally confined, instantaneous and differs from recursive acceleration processes such as Fermi acceleration. We find that the proposed acceleration mechanism competes with thermalization and becomes important at high Lorentz factors.

Collisionless plasma shock theory, which applies for example to the afterglow of gamma ray bursts, still contains key issues that are poorly understood. In this paper we study charged particle dynamics in a highly relativistic collisionless shock numerically using ~10^9 particles. We find a power law distribution of accelerated electrons, which upon detailed investigation turns out to originate from an acceleration mechanism that is decidedly different from Fermi acceleration. Electrons are accelerated by strong filamentation instabilities in the shocked interpenetrating plasmas and coincide spatially with the power law distributed current filamentary structures. These structures are an inevitable consequence of the now well established Weibel-like two-stream instability that operates in relativistic collisionless shocks. The electrons are accelerated and decelerated instantaneously and locally; a scenery that differs qualitatively from recursive acceleration mechanisms such as Fermi acceleration. The slopes of the electron distribution power laws are in concordance with the particle power law spectra inferred from observed afterglow synchrotron radiation in gamma ray bursts, and the mechanism can possibly explain more generally the origin of non-thermal radiation from shocked inter- and circum-stellar regions and from relativistic jets.

Using a three dimensional relativistic particle-in-cell code we have performed numerical experiments of plasma shells colliding at relativistic velocities. Such scenarios are found in many astrophysical objects e.g. the relativistic outflow from gamma ray bursts, active galactic nuclei jets and supernova remnants. We show how a Weibel-like two-stream instability is capable of generating small-scale magnetic filaments with strength up to percents of equipartition. Such field topology is ideal for the generation of jitter radiation as opposed to synchrotron radiation. We also explain how the field generating mechanism involves acceleration of electrons to power law distributions (N(E)~E^(-p))through a non-Fermi acceleration mechanism. The results add to our understanding of collisionless shocks.

Data from recent numerical simulations of the solar corona and transition region are analysed and the magnetic field connection between the low corona and the photosphere is found to be close to that of a potential field. The fieldline to fieldline displacements follow a power law distribution with typical displacements of just a few Mm. Three loops visible in emulated Transition Region And Coronal Explorer (TRACE) filters are analysed in detail and found to have significantly different heating rates and distributions thereof, one of them showing a small scale heating event. The dynamical structure is complicated even though all the loops are visible in a single filter along most of their lengths. None of the loops are static, but are in the process of evolving into loops with very different characteristics. Differential Emission Measure (DEM) curves along one of the loops illustrate that DEM curves have to be treated carefully if physical characteristics are to be extracted.

We present an ab initio approach to the solar coronal heating problem by modelling a small part of the solar corona in a computational box using a 3D MHD code including realistic physics. The observed solar granular velocity pattern and its amplitude and vorticity power spectra, as reproduced by a weighted Voronoi tessellation method, are used as a boundary condition that generates a Poynting flux in the presence of a magnetic field. The initial magnetic field is a potential extrapolation of a SOHO/MDI high resolution magnetogram, and a standard stratified atmosphere is used as a thermal initial condition. Except for the chromospheric temperature structure, which is kept fixed, the initial conditions are quickly forgotten because the included Spitzer conductivity and radiative cooling function have typical timescales much shorter than the time span of the simulation. After a short initial start up period, the magnetic field is able to dissipate 3-4 10^6 ergs cm^{-2} s^{-1} in a highly intermittent corona, maintaining an average temperature of $\sim 10^6$ K, at coronal density values for which emulated images of the Transition Region And Coronal Explorer(TRACE) 171 and 195 pass bands reproduce observed photon count rates.

Solar p-mode oscillations are excited by the work of stochastic, non-adiabatic, pressure fluctuations on the compressive modes. We evaluate the expression for the radial mode excitation rate derived by Nordlund and Stein (Paper I) using numerical simulations of near surface solar convection. We first apply this expression to the three radial modes of the simulation and obtain good agreement between the predicted excitation rate and the actual mode damping rates as determined from their energies and the widths of their resolved spectral profiles. We then apply this expression for the mode excitation rate to the solar modes and obtain excellent agreement with the low l damping rates determined from GOLF data. Excitation occurs close to the surface, mainly in the intergranular lanes and near the boundaries of granules (where turbulence and radiative cooling are large). The non-adiabatic pressure fluctuations near the surface are produced by small instantaneous local imbalances between the divergence of the radiative and convective fluxes near the solar surface. Below the surface, the non-adiabatic pressure fluctuations are produced primarily by turbulent pressure fluctuations (Reynolds stresses). The frequency dependence of the mode excitation is due to effects of the mode structure and the pressure fluctuation spectrum. Excitation is small at low frequencies due to mode properties -- the mode compression decreases and the mode mass increases at low frequency. Excitation is small at high frequencies due to the pressure fluctuation spectrum -- pressure fluctuations become small at high frequencies because they are due to convection which is a long time scale phenomena compared to the dominant p-mode periods.

We present a formalism for investigating the interaction between pmode oscillations and convection by analyzing realistic, three-dimensional simulations of the near-surface layers of the solar convection zone. By choosing suitable definitions for fluctuations and averages, we obtain a separation that retains exact equations. The equations for the horizontal averages contain one part that corresponds directly to the wave equations for a 1-D medium, plus additional terms that arise from the averaging and correspond to the turbulent pressure gradient in the momentum equation and the divergence of the convective and kinetic energy fluxes in the internal energy equation. These terms cannot be evaluated in closed form, but they may be measured in numerical simulations. The additional terms may cause the mode frequencies to shift, relative to what would be obtained if only the terms corresponding to a 1-D medium were retained---most straightforwardly by changing the mean stratification, and more subtly by changing the effective compressibility of the medium. In the presence of time dependent convection, the additional terms also have a stochastic time dependence, that acts as a source of random excitation of the coherent modes. In the present paper, we derive an expression for the excitation power and test it by applying it to a numerical experiment of sufficient duration for the excited modes to be spectrally resolved.

Advances in hydrodynamical simulations have provided new insights into the effects of convection on the frequencies of solar oscillations. As more accurate observations become available, this may lead to an improved understanding of the dynamics of convection and the interaction between convection and pulsation (\cite{Rosenthal+99}). Recent high-resolution observations from the SOI/MDI instrument on the SOHO spacecraft have provided the so-far most-detailed observations of high-degree modes of solar oscillations, which are particularly sensitive to the near-surface properties of the Sun. Here we present preliminary results of a comparison between these observations and frequencies computed for models based on realistic simulations of near-surface convection. Such comparisons may be expected to help in identifying the causes of the remaining differences between the observed frequencies and those of solar models.

We study the formation of O I and OH spectral lines in three-dimensional hydrodynamic models of the solar photosphere. The line source function of the O I 777 nm triplet is allowed to depart from local thermodynamic equilibrium (LTE), within the two-level-atom approximation. Comparison with results from 1D models show that the 3D models alleviate, but do not remove, the discrepancy between the oxygen abundances reported from non-LTE work on the 777 nm triplet and from the [O I] 630 nm and OH lines. Results for the latter two could imply that the solar oxygen abundance is below 8.8 (lg(H) = 12). If this is confirmed, the discrepancy between theory and observation for the 777 nm triplet lines might fall within the range of errors in equivalent width measurements and f-values. The line source function of the 777 nm triplet in the 1.5D approximation is shown to differ insignificantly from the full 3D non-LTE result.