In this contribution, we review the results of the ALSI project (Advanced Laser-writing for Stellar Interferometry), aimed at assessing the potential of ultrafast laser writing to fabricate mid-infared integrated optics (IO) devices with performance compatible with an implementation in real interferometric instruments like Hi5 or PFI. Waveguides for the L, L' and M bands with moderate propagation losses were manufactured in Gallium Lanthanum Sulfide and ZBLAN glasses and used to develop photonic building blocks as well as a full mid-IR 4-telescope beam combiner. We discuss the advantages and disadvantages of the tested combiners and discuss a possible roadmap for the continuation of this work.

In the last few years, integrated optics (IO) beam combiners have facilitated the emergence of 4-telescope interferometers such as PIONIER or GRAVITY, boosting the imaging capabilities of the VLTI. However, the spectral range beyond 2.2microns is not ideally covered by the conventional silica based IO. Here, we propose to consider new laser-written IO prototypes made of GLS glasses, a material that permits access to the mid-infrared spectral regime. Our goal is to conduct a full characterization of our mid-IR IO 2-telescope coupler in order to measure the performance levels directly relevant for long-baseline interferometry. We focus in particular on the exploitation of the L and M astronomical bands. We use a dedicated Michelson-interferometer setup to perform Fourier Transform spectroscopy on the coupler and measure its broadband interferometric performance. We also analyze the polarization properties of the coupler, the differential dispersion and phase degradation as well as the modal behavior and the total throughput. We measure broadband interferometric contrasts of 94.9% and 92.1% for unpolarized light in the L and M bands. Spectrally integrated splitting ratios are close to 50% but show chromatic dependence over the considered bandwidths. Additionally, the phase variation due to the combiner is measured and does not exceed 0.04rad and 0.07rad across the band L and M band, respectively. The total throughput of the coupler including Fresnel and injection losses from free-space is 25.4%. The laser-written IO GLS prototype combiners prove to be a reliable technological solution with promising performance for mid-infrared long-baseline interferometry. In the next steps, we will consider more advanced optical functions as well as a fiber-fed input and revise the optical design parameters in order the further enhance the total throughput and achromatic behavior.

Nulling interferometry has been identified as a competitive technique for the detection of extrasolar planets. The technique consists in combining out-of-phase pairs of telescopes to null effectively the light of a bright star an reveal the dim glow of the companion. We have manufactured and tested with monochromatic light an integrated optics component which combines a linear array of 4 telescopes in the nulling mode envisaged by Angel & Wolf (1997). Our testbench simulates the motion of a star in the sky. The tests have demonstrated a nulling scaling as the fourth power of the baseline delay.

We present a compact setup based on a three-dimensional integrated optical component, allowing the mea- surement of spectrally resolved complex-visibilities for three channels of polychromatic light. We have tested a prototype of the component in R band and showed that accurate complex visibilities could be retrieved over a bandwidth of 50 nm centered at 650 nm (resolution: R=130). Closure phase stability in the order of $\lambda$/60 was achieved implying that the device could be used for spectro-interferometry imaging.