The Wide Field Infrared Survey Telescope (WFIRST) Coronagraph Instrument (CGI) is a high-contrast imager and integral field spectrograph that will enable the study of exoplanets and circumstellar disks at visible wavelengths. Ground-based high-contrast instrumentation has fundamentally limited performance at small working angles, even under optimistic assumptions for 30m-class telescopes. There is a strong scientific driver for better performance, particularly at visible wavelengths. Future flagship mission concepts aim to image Earth analogues with visible light flux ratios of more than 10^10. CGI is a critical intermediate step toward that goal, with a predicted 10^8-9 flux ratio capability in the visible. CGI achieves this through improvements over current ground and space systems in several areas: (i) Hardware: space-qualified (TRL9) deformable mirrors, detectors, and coronagraphs, (ii) Algorithms: wavefront sensing and control; post-processing of integral field spectrograph, polarimetric, and extended object data, and (iii) Validation of telescope and instrument models at high accuracy and precision. This white paper, submitted to the 2018 NAS Exoplanet Science Strategy call, describes the status of key CGI technologies and presents ways in which performance is likely to evolve as the CGI design matures.

The NASA Exoplanet Program Analysis Group (ExoPAG) has undertaken an effort to define mission Level 1 requirements for exoplanet direct detection missions at a range of sizes. This report outlines the science goals and requirements for the next exoplanet flagship imaging and spectroscopy mission as determined by the flagship mission Study Analysis Group (SAG) of the NASA Exoplanet Program Analysis Group (ExoPAG). We expect that these goals and requirements will be used to evaluate specific architectures for a future flagship exoplanet imaging and spectroscopy mission, and we expect this effort to serve as a guide and template for similar goals and requirements for smaller missions, an effort that we expect will begin soon. These goals and requirements were discussed, determined, and documented over a 1 year period with contributions from approximately 60 volunteer exoplanet scientists, technologists, and engineers. Numerous teleconferences, emails, and several in-person meetings were conducted to progress on this task, resulting in creating and improving drafts of mission science goals and requirements. That work has been documented in this report as a set of science goals, more detailed objectives, and specific requirements with deliberate flow-down and linkage between each of these sets. The specific requirements have been developed in two categories: "Musts" are nonnegotiable hard requirements, while "Discriminator" requirements assign value to performance in areas beyond the floor values set by the "Musts." We believe that this framework and content will ensure that this report will be valuable when applied to future mission evaluation activities. We envision that any future exoplanet imaging flagship mission must also be capable of conducting a broad range of other observational astrophysics. We expect that this will be done by the NASA Cosmic Origins Program Analysis Group (COPAG).

As part of NASA's mission to explore habitable planets orbiting nearby stars, this paper explores the detection and characterization capabilities of a 4-m space telescope plus 50-m starshade located at the Earth-Sun L2 point, a.k.a. the New Worlds Observer (NWO). Our calculations include the true spectral types and distribution of stars on the sky, an iterative target selection protocol designed to maximize efficiency based on prior detections, and realistic mission constraints. We carry out both analytical calculations and simulated observing runs for a wide range in exozodiacal background levels ({\epsilon} = 1 - 100 times the local zodi brightness) and overall prevalence of Earth-like terrestrial planets ({\eta}\oplus = 0.1 - 1). We find that even without any return visits, the NWO baseline architecture (IWA = 65 mas, limiting FPB = 4\times10-11) can achieve a 95% probability of detecting and spectrally characterizing at least one habitable Earth-like planet, and an expectation value of ~3 planets found, within the mission lifetime and {\Delta}V budgets, even in the worst-case scenario ({\eta}\oplus = 0.1 and {\epsilon} = 100 zodis for every target). This achievement requires about one year of integration time spread over the 5 year mission, leaving the remainder of the telescope time for UV-NIR General Astrophysics. Cost and technical feasibility considerations point to a "sweet spot" in starshade design near a 50-m starshade effective diameter, with 12 or 16 petals, at a distance of 70,000-100,000 km from the telescope.

For exoplanet direct detection mission concepts such as Terrestrial Planet Finder or Exoplanet Probe, light from the exozodiacal dust tends to obscure any exoplanets present in the image. Data analysis methods to identify point sources against this background have been very simple, traditionally with the simplifying assumption that the exozodi is uniformly distributed, just as our local zodiacal background is uniform over several-arcsec scales. However, the typical size of an exozodi cloud is expected to be comparable to the typical exoplanet orbital radii, or at least those of greatest interest_ the "habitable zone" range from 0.7-1.5 AU. When a direct detection instrument is reduced in size for cost reasons, the point spread function (PSF) becomes broader, making it more difficult to distinguish a point source from a "blob" of exozodi light. In this case, the shot-noise limited integration time may not be enough; instead we may need an elevated signal-to-noise ratio and/or later measurements to resolve ambiguities in the image data, identify a point source with a calculable and high confidence level, and isolate the exozodi and exoplanet contributions to the observed light profile. We will examine some typical profiles and a few methods of analyzing image data, with the goal of structuring an approach to this data analysis problem.

The Stellar Imager mission concept is a space-based UV/Optical interferometer designed to resolve surface magnetic activity and subsurface structure and flows of a population of Sun-like stars, in order to accelerate the development and validation of a predictive dynamo model for the Sun and enable accurate long-term forecasting of solar/stellar magnetic activity.

This is a scientific strategy for the detection and characterization of extrasolar planets; that is, planets orbiting other stars. As such, it maps out over a 15-year horizon the techniques and capabilities required to detect and measure the properties of planets as small as Earth around stars as large as our own Sun. It shows how the technology pieces and their development fit together to achieve the primary goal of the strategy: if planets like Earth exist around stars within some tens of light years of our own Solar System, those planets will be found and their basic properties characterized. Essential to this strategy is not only the search for and examination of individual planets, but also a knowledge of the arrangement, or architecture, of planetary systems around as large a number of stars as possible; this is the second goal of the strategy. The final goal of the strategy is the study of disks around stars, important both to understand the implications of the variety of exoplanet systems for planet formation, and to determine how many nearby stars have environments around them clean enough of debris that planets may be sought and, if found, characterized.