We present the status of on-going detector development efforts for our joint NASA/CNES balloon-borne UV multi-object spectrograph, the Faint Intergalactic Redshifted Emission Balloon (FIREBall-2; FB-2). FB-2 demonstrates a new UV detector technology, the delta-doped Electron Multiplying CCD (EMCCD), in a low risk suborbital environment, to prove the performance of EMCCDs for future space missions and Technology Readiness Level (TRL) advancement. EMCCDs can be used in photon counting (PC) mode to achieve extremely low readout noise ($<$1 electron). Our testing has focused on reducing clock-induced-charge (CIC) through wave shaping and well depth optimization with a \nuvu V2 CCCP Controller, measuring CIC at 0.001 e$^{-}$/pixel/frame. This optimization also includes methods for reducing dark current, via cooling, and substrate voltage levels. We discuss the challenges of removing cosmic rays, which are also amplified by these detectors, as well as a data reduction pipeline designed for our noise measurement objectives. FB-2 flew in 2018, providing the first time an EMCCD was used for UV observations in the stratosphere. FB-2 is currently being built up to fly again in 2020, and improvements are being made to the EMCCD to continue optimizing its performance for better noise control.

The Habitable Exoplanet Observatory, or HabEx, has been designed to be the Great Observatory of the 2030s. For the first time in human history, technologies have matured sufficiently to enable an affordable space-based telescope mission capable of discovering and characterizing Earthlike planets orbiting nearby bright sunlike stars in order to search for signs of habitability and biosignatures. Such a mission can also be equipped with instrumentation that will enable broad and exciting general astrophysics and planetary science not possible from current or planned facilities. HabEx is a space telescope with unique imaging and multi-object spectroscopic capabilities at wavelengths ranging from ultraviolet (UV) to near-IR. These capabilities allow for a broad suite of compelling science that cuts across the entire NASA astrophysics portfolio. HabEx has three primary science goals: (1) Seek out nearby worlds and explore their habitability; (2) Map out nearby planetary systems and understand the diversity of the worlds they contain; (3) Enable new explorations of astrophysical systems from our own solar system to external galaxies by extending our reach in the UV through near-IR. This Great Observatory science will be selected through a competed GO program, and will account for about 50% of the HabEx primary mission. The preferred HabEx architecture is a 4m, monolithic, off-axis telescope that is diffraction-limited at 0.4 microns and is in an L2 orbit. HabEx employs two starlight suppression systems: a coronagraph and a starshade, each with their own dedicated instrument.

Here we discuss advances in UV technology over the last decade, with an emphasis on photon counting, low noise, high efficiency detectors in sub-orbital programs. We focus on the use of innovative UV detectors in a NASA astrophysics balloon telescope, FIREBall-2, which successfully flew in the Fall of 2018. The FIREBall-2 telescope is designed to make observations of distant galaxies to understand more about how they evolve by looking for diffuse hydrogen in the galactic halo. The payload utilizes a 1.0-meter class telescope with an ultraviolet multi-object spectrograph and is a joint collaboration between Caltech, JPL, LAM, CNES, Columbia, the University of Arizona, and NASA. The improved detector technology that was tested on FIREBall-2 can be applied to any UV mission. We discuss the results of the flight and detector performance. We will also discuss the utility of sub-orbital platforms (both balloon payloads and rockets) for testing new technologies and proof-of-concept scientific ideas

For the first time in human history, technologies have matured sufficiently to enable a mission capable of discovering and characterizing habitable planets like Earth orbiting sunlike stars other than the Sun. At the same time, such a platform would enable unique science not possible from ground-based facilities. This science is broad and exciting, ranging from new investigations of our own solar system to a full range of astrophysics disciplines. The Habitable Exoplanet Observatory, or HabEx, is one of four studies currently being undertaken by NASA in preparation for the 2020 Astrophysics Decadal Survey. HabEx has been designed to be the Great Observatory of the 2030s, with community involvement through a competed and funded Guest Observer (GO) program. This interim report describes the HabEx baseline concept, which is a space-based 4-meter diameter telescope mission concept with ultraviolet (UV), optical, and near-infrared (near-IR) imaging and spectroscopy capabilities. More information on HabEx can be found at https://www.jpl.nasa.gov/habex

The Star-Planet Activity Research CubeSat (SPARCS) is a NASA-funded astrophysics mission, devoted to the study of the ultraviolet (UV) time-domain behavior in low-mass stars. Given their abundance and size, low-mass stars are important targets in the search for habitable-zone, exoplanets. However, not enough is known about the stars flare and quiescent emission, which powers photochemical reactions on the atmospheres of possible planets. Over its initial 1-year mission, SPARCS will stare at ~10 stars in order to measure short- (minutes) and long- (months) term variability simultaneously in the near-UV (NUV - lam = 280 nm) and far-UV (FUV - lam = 162 nm). The SPARCS payload consists of a 9-cm reflector telescope paired with two high-sensitivity 2D-doped CCDs. The detectors are kept passively cooled at 238K, in order to reduce dark-current contribution. The filters have been selected to provide strong rejection of longer wavelengths, where most of the starlight is emitted. The payload will be integrated within a 6U CubeSat to be placed on a Sun-synchronous terminator orbit, allowing for long observing stares for all targets. Launch is expected to occur not earlier than October 2021.

A number of exciting concepts are under development for Flagship, Probe class, Explorer class, and Suborbital class NASA missions in the ultraviolet/optical spectral ranges. These missions will depend on high performance silicon detector arrays being delivered affordably and in high numbers. In a focused effort we have advanced delta-doping technology to high throughput and high yield wafer-scale processing, encompassing a multitude of state-of-the-art silicon-based detector formats and designs. As part of this technology advancement and in preparation for upcoming missions, we have embarked on a number of field observations, instrument integrations, and independent evaluations of delta-doped arrays. In this paper, we present recent data and innovations from the Advanced Detectors and Systems program at JPL, including two-dimensional doping technology; our end-to-end post-fabrication processing of high performance UV/Optical/NIR arrays; and advanced coatings for detectors and optical elements. Additionally, we present examples of past, in-progress, and planned observations and deployments of delta-doped arrays.

We report on multilayer high efficiency antireflection coating (ARC) design and development for use at UV wavelengths on CCDs and other Si-based detectors. We have previously demonstrated a set of single-layer coatings, which achieve >50% quantum efficiency (QE) in four bands from 130 to 300 nm. We now present multilayer coating designs that significantly outperform our previous work between 195 and 215 nm. Using up to 11 layers, we present several model designs to reach QE above 80%. We also demonstrate the successful performance of 5 and 11 layer ARCs on silicon and fused silica substrates. Finally, we present a five-layer coat- ing deposited onto a thinned, delta-doped CCD and demonstrate external QE greater than 60% between 202 and 208 nm, with a peak of 67.6% at 206 nm.

We propose a revolutionary way of studying the sur-face of Mars using a wind-driven network of mobile sensors- Gone with the Wind ON_Mars (GOWON). GOWON is envisioned to be a scalable, 100% self energy-generating and distributed system that allows in-situ mapping of a wide range of phenomena in a much larger portion of the surface of Mars compared to earlier missions. It could radically improve the possibility of finding rare phenomena like bio signatures through random wind-driven search. It could explore difficult terrains that were beyond the reach of previous missions, such as regions with very steep slopes, cluttered surfaces and/or sand dunes; GOWON is envisioned as an on going mission with a long life span. It could achieve any of NASA's scientific objectives on Mars in a cost-effective way, leaving a long lasting sensing and searching infrastructure on Mars. GOWON is a 2012 Step B invitee for NASA Innovative Advanced Concept (NIAC). It addresses the challenge area of the Mars Surface System Capabilities area. We believe the challenge to be near-term, i.e., 2018-2024.

We report on the development of coatings for a CCD detector optimized for use in a fixed dispersion UV spectrograph. Due to the rapidly changing index of refraction of Si, single layer broadband anti-reflection coatings are not suitable to increase quantum efficiency at all wavelengths of interest. Instead, we describe a creative solution that provides excellent performance over UV wavelengths. We describe progress in the development of a CCD detector with theoretical quantum efficiencies (QE) of greater than 60% at wavelengths from 120 to 300nm. This high efficiency may be reached by coating a backside illuminated, thinned, delta-doped CCD with a series of thin film anti-reflection coatings. The materials tested include MgF2 (optimized for highest performance from 120-150nm), SiO2 (150-180nm), Al2O3(180-240nm), MgO (200-250nm), and HfO2 (240-300nm). A variety of deposition techniques were tested and a selection of coatings which minimized reflectance on a Si test wafer were applied to live devices. We also discuss future uses and improvements, including graded and multi-layer coatings.

In this paper we present our system design and methodology for making absolute quantum efficiency (QE) measurements through the vacuum ultraviolet (VUV) and verify the system with delta-doped silicon CCDs. Delta-doped detectors provide an excellent platform to validate measurements through the VUV due to their enhanced UV response. The requirements for measuring QE through the VUV are more strenuous than measurements in the near UV and necessitate, among other things, the use of a vacuum monochromator, good dewar chamber vacuum to prevent on-chip condensation, and more stringent handling requirements.

We have used Molecular Beam Epitaxy (MBE)-based delta doping technology to demonstrate near 100% internal quantum efficiency (QE) on silicon electron-multiplied Charge Coupled Devices (EMCCDs) for single photon counting detection applications. Furthermore, we have used precision techniques for depositing antireflection (AR) coatings by employing Atomic Layer Deposition (ALD) and demonstrated over 50% external QE in the far and near-ultraviolet in megapixel arrays. We have demonstrated that other device parameters such as dark current are unchanged after these processes. In this paper, we report on these results and briefly discuss the techniques and processes employed.

The Star Formation Camera (SFC) is a wide-field (~15'x19, >280 arcmin^2), high-resolution (18x18 mas pixels) UV/optical dichroic camera designed for the Theia 4-m space-borne space telescope concept. SFC will deliver diffraction-limited images at lambda > 300 nm in both a blue (190-517nm) and a red (517-1075nm) channel simultaneously. Our aim is to conduct a comprehensive and systematic study of the astrophysical processes and environments relevant for the births and life cycles of stars and their planetary systems, and to investigate and understand the range of environments, feedback mechanisms, and other factors that most affect the outcome of the star and planet formation process. This program addresses the origins and evolution of stars, galaxies, and cosmic structure and has direct relevance for the formation and survival of planetary systems like our Solar System and planets like Earth. We present the design and performance specifications resulting from the implementation study of the camera, conducted under NASA's Astrophysics Strategic Mission Concept Studies program, which is intended to assemble realistic options for mission development over the next decade. The result is an extraordinarily capable instrument that will provide deep, high-resolution imaging across a very wide field enabling a great variety of community science as well as completing the core survey science that drives the design of the camera. The technology associated with the camera is next generation but still relatively high TRL, allowing a low-risk solution with moderate technology development investment over the next 10 years. We estimate the cost of the instrument to be $390M FY08.

We outline the challenges associated with the development and construction of large focal plane arrays for use both on the ground and in space. Using lessons learned from existing JPL-led and ASU/JPL partnership efforts to develop technology for, and design such arrays and imagers for large focal planes, we enumerate here the remaining problems that need to be solved to make such a venture viable. Technologies we consider vital for further development include: (1) architectures, processes, circuits, and readout solutions for production and integration of four-side buttable, low-cost, high-fidelity, high-performance, and high-reliability CCD and CMOS imagers; (2) modular, four-side buttable packaging of CCD/CMOS imagers; (3) techniques and hardware to test and characterize the large number of chips required to produce the hundreds of flight-grade detectors needed for large focal-plane missions being conceived at this time; (4) ground based testbed needs, such as a large format camera mounted on a ground-based telescope, to field test the detectors and the focal plane technology solutions; and (5) validation of critical sub-components of the design on a balloon mission to ensure their flight-readiness. This paper outlines the steps required to provide a mature solution to the astronomical community with a minimal investment, building on years of planning and investments already completed at JPL.

(abridged) The Observatory for Multi-Epoch Gravitational Lens Astrophysics (OMEGA) is a mission concept for a 1.5-m near-UV through near-IR space observatory that will be dedicated to frequent imaging and spectroscopic monitoring of ~100 multiply-imaged active galactic nuclei over the whole sky. Using wavelength-tailored dichroics with extremely high transmittance, efficient imaging in six channels will be done simultaneously during each visit to each target. The separate spectroscopic mode, engaged through a flip-in mirror, uses an image slicer spectrograph. After a period of many visits to all targets, the resulting multidimensional movies can then be analyzed to a) measure the mass function of dark matter substructure; b) measure precise masses of the accreting black holes as well as the structure of their accretion disks and their environments over several decades of physical scale; and c) measure a combination of the local Hubble expansion and cosmological distances to unprecedented precision.

We present a preliminary calibration and flight performance of the Long-Slit Imaging Dual Order Spectrograph (LIDOS), a rocket-borne instrument with a large dynamic range in the 900 - 1700A bandpass. The instrument observes UV-bright objects with a CCD channel and fainter nebulosity with an MCP detector. The image quality and the detector quantum efficiencies were determined using the calibration and test equipment at the Johns Hopkins University, and further monitored using an on-board electron-impact calibration lamp. We review results from each of the three flights of the instrument.