Magnetic flux ropes (MFRs) are usually considered to be the magnetic structure that dominates the transport of helicity from the Sun into the heliosphere. They entrain a confined plasma within a helically organized magnetic structure and are able to cause geomagnetic activity. The formation, evolution and twist distribution of MFRs are issues subject to strong debate. Although different twist profiles have been suggested so far, none of them has been thoroughly explored yet. The aim of this paper is to present a theoretical study of the conditions under which MFRs with different twist profiles are kink stable and thereby shed some light on the aforementioned discussions. The magnetic field is modeled according to the circular-cylindrical analytical flux rope model in Nieves-Chinchilla et al. (2016) as well as the Lundquist and Gold-Hoyle models, and the kink stability is analyzed with a numerical method that has been developed based on Linton, Longcope, and Fisher (1996). The results are discussed in relation to MFR rotations, magnetic forces, the reversed chirality scenario and the expansion throughout the heliosphere, among others, providing a theoretical background to improve the current understanding of the internal magnetic configuration of CMEs. The data obtained by new missions like Parker Solar Probe or Solar Orbiter will give the opportunity to explore these results and ideas by observing MFRs closer than ever to the Sun.

On 2012 August 2, two CMEs (CME-1 and CME-2) erupted from the west limb of the Sun as viewed from Earth, and were observed in images from the white light coronagraphs on the SOHO and STEREO spacecraft. These events were also observed by the Very Large Array (VLA), which was monitoring the Sun at radio wavelengths, allowing time-dependent Faraday rotation observations to be made of both events. We use the white-light imaging and radio data to model the 3-D field geometry of both CMEs, assuming a magnetic flux rope geometry. For CME-2, we also consider 1 au in situ field measurements in the analysis, as this CME hits STEREO-A on August~6, making this the first CME with observational constraints from stereoscopic coronal imaging, radio Faraday rotation, and in situ plasma measurements combined. The imaging and in situ observations of CME-2 provide two clear predictions for the radio data; namely that VLA should observe positive rotation measures (RMs) when the radio line of sight first encounters the CME, and that the sign should reverse to negative within a couple hours. The initial positive RMs are in fact observed. The expected sign reversal is not, but the VLA data unfortunately end too soon to be sure of the significance of this discrepancy. We interpret an RM increase prior to the expected occultation time of the CME as a signature of a sheath region of deflected field ahead of the CME itself.

The evolution of the magnetic field and plasma quantities inside a coronal mass ejection (CME) with distance are known from statistical studies using data from 1 au monitors, planetary missions, Helios, and Ulysses. This does not cover the innermost heliosphere, below 0.29 au, where no data are yet publicly available. Here, we describe the evolution of the properties of simulated CMEs in the inner heliosphere using two different initiation mechanisms. We compare the radial evolution of these properties with that found from statistical studies based on observations in the inner heliosphere by Helios and MESSENGER. We find that the evolution of the radial size and magnetic field strength is nearly indistinguishable for twisted flux rope from that of writhed CMEs. The evolution of these properties is also consistent with past studies, primarily with recent statistical studies using in situ measurements and with studies using remote observations of CMEs.

Coronal mass ejections (CMEs) are the main drivers of geomagnetic disturbances, but the effects of their interaction with Earth's magnetic field depend on their magnetic configuration and orientation. Fitting and reconstruction techniques have been developed to determine the important geometrical and physical CME properties. In many instances, there is disagreement between such different methods but also between fitting from in situ measurements and reconstruction based on remote imaging. Here, we compare three methods based on different assumptions for measurements of thirteen CMEs by the Wind spacecraft from 1997 to 2015. These CMEs are selected from the interplanetary coronal mass ejections catalog on https://wind.nasa.gov/ICMEindex.php due to their simplicity in terms of 1) small expansion speed throughout the CME and 2) little asymmetry in the magnetic field profile. This makes these thirteen events ideal candidates to compare codes that do not include expansion nor distortion. We find that, for these simple events, the codes are in relatively good agreement in terms of the CME axis orientation for six out of the 13 events. Using the Grad-Shafranov technique, we can determine the shape of the cross-section, which is assumed to be circular for the other two models, a force-free fitting and a circular-cylindrical non-force-free fitting. Five of the events are found to have a clear circular cross-section, even when this is not a pre-condition of the reconstruction. We make an initial attempt at evaluating the adequacy of the different assumptions for these simple CMEs. The conclusion of this work strongly suggests that attempts at reconciling in situ and remote-sensing views of CMEs must take in consideration the compatibility of the different models with specific CME structures to better reproduce flux ropes.

This article completes and extends a recent study of the Grad-Shafranov (GS) reconstruction in toroidal geometry, as applied to a two and a half dimensional configurations in space plasmas with rotational symmetry. A further application to the benchmark study of an analytic solution to the toroidal GS equation with added noise shows deviations in the reconstructed geometry of the flux rope configuration, characterized by the orientation of the rotation axis, the major radius, and the impact parameter. On the other hand, the physical properties of the flux rope, including the axial field strength, and the toroidal and poloidal magnetic flux, agree between the numerical and exact GS solutions. We also present a real event study of a magnetic cloud flux rope from \textit{in situ} spacecraft measurements. The devised procedures for toroidal GS reconstruction are successfully executed. Various geometrical and physical parameters are obtained with associated uncertainty estimates. The overall configuration of the flux rope from the GS reconstruction is compared with the corresponding morphological reconstruction based on white-light images. The results show overall consistency, but also discrepancy in that the inclination angle of the flux rope central axis with respect to the ecliptic plane differs by about 20-30 degrees in the plane of the sky. We also compare the results with the original straight-cylinder GS reconstruction and discuss our findings.

We identify coronal mass ejections (CMEs) associated with magnetic clouds (MCs) observed near Earth by the Wind spacecraft from 2008 to mid-2012, a time period when the two STEREO spacecraft were well positioned to study Earth-directed CMEs. We find 31 out of 48 Wind MCs during this period can be clearly connected with a CME that is trackable in STEREO imagery all the way from the Sun to near 1 AU. For these events, we perform full 3-D reconstructions of the CME structure and kinematics, assuming a flux rope morphology for the CME shape, considering the full complement of STEREO and SOHO imaging constraints. We find that the flux rope orientations and sizes inferred from imaging are not well correlated with MC orientations and sizes inferred from the Wind data. However, velocities within the MC region are reproduced reasonably well by the image-based reconstruction. Our kinematic measurements are used to provide simple prescriptions for predicting CME arrival times at Earth, provided for a range of distances from the Sun where CME velocity measurements might be made. Finally, we discuss the differences in the morphology and kinematics of CME flux ropes associated with different surface phenomena (flares, filament eruptions, or no surface activity).

The process by which the Sun affects the terrestrial environment on short timescales is predominately driven by the amount of magnetic reconnection between the solar wind and Earth's magnetosphere. Reconnection occurs most efficiently when the solar wind magnetic field has a southward component. The most severe impacts are during the arrival of a coronal mass ejection (CME) when the magnetosphere is both compressed and magnetically connected to the heliospheric environment. Unfortunately, forecasting magnetic vectors within coronal mass ejections remains elusive. Here we report how, by combining a statistically robust helicity rule for a CME's solar origin with a simplified flux rope topology the magnetic vectors within the Earth-directed segment of a CME can be predicted. In order to test the validity of this proof-of-concept architecture for estimating the magnetic vectors within CMEs, a total of eight CME events (between 2010 and 2014) have been investigated. With a focus on the large false alarm of January 2014, this work highlights the importance of including the early evolutionary effects of a CME for forecasting purposes. The angular rotation in the predicted magnetic field closely follows the broad rotational structure seen within the in situ data. This time-varying field estimate is implemented into a process to quantitatively predict a time-varying Kp index that is described in detail in paper II. Future statistical work, quantifying the uncertainties in this process, may improve the more heuristic approach used by early forecasting systems.

Coronal mass ejections (CMEs) are the main driver of Space Weather. Therefore, a precise forecasting of their likely geo-effectiveness relies on an accurate tracking of their morphological and kinematical evolution throughout the interplanetary medium. However, single view-point observations require many assumptions to model the development of the features of CMEs, the most common hypotheses were those of radial propagation and self-similar expansion. The use of different view-points shows that at least for some cases, those assumptions are no longer valid. From radial propagation, typical attributes that can now been confirmed to exist are; over-expansion, and/or rotation along the propagation axis. Understanding of the 3D development and evolution of the CME features will help to establish the connection between remote and in-situ observations, and hence help forecast Space Weather. We present an analysis of the morphological and kinematical evolution of a STEREO B-directed CME on 2009 August 25-27. By means of a comprehensive analysis of remote imaging observations provided by SOHO, STEREO and SDO missions, and in-situ measurements recorded by Wind, ACE, and MESSENGER, we prove in this paper that the event exhibits signatures of deflection, which are usually associated to changes in the direction of propagation and/or also with rotation. The interaction with other magnetic obstacles could act as a catalyst of deflection or rotation effects. We propose, also, a method to investigate the change of the CME Tilt from the analysis of height-time direct measurements. If this method is validated in further work, it may have important implications for space weather studies because it will allow infer ICME orientation.

This Topical Issue of Solar Physics, devoted to the study of flux-rope structure in coronal mass ejections (CMEs), is based on two Coordinated Data Analysis Workshops (CDAWs) held in 2010 (20 - 23 September in Dan Diego, California, USA) and 2011 (September 5-9 in Alcala, Spain). The primary purpose of the CDAWs was to address the question: Do all CMEs have flux rope structure? There are 18 papers om this topical issue, including this preface.

We investigate a CME propagating towards Earth on 29 March 2011. This event is specifically chosen for its predominately northward directed magnetic field, so that the influence from the momentum flux onto Earth can be isolated. We focus our study on understanding how a small Earth-directed segment propagates. Mass images are created from the white-light cameras onboard STEREO which are also converted into mass height-time maps (mass J-maps). The mass tracks on these J-maps correspond to the sheath region between the CME and its associated shock front as detected by in situ measurements at L1. A time-series of mass measurements from the STEREO COR-2A instrument are made along the Earth propagation direction. Qualitatively, this mass time-series shows a remarkable resemblance to the L1 in situ density series. The in situ measurements are used as inputs into a 3D magnetospheric space weather simulation from CCMC. These simulations display a sudden compression of the magnetosphere from the large momentum flux at the leading edge of the CME and predictions are made for the time-derivative of the magnetic field (dB/dt) on the ground. The predicted dB/dt were then compared with observations from specific equatorially-located ground stations and show notable similarity. This study of the momentum of a CME from the Sun down to its influence on magnetic ground stations on Earth is presented as preliminary proof of concept, such that future attempts may try to use remote sensing to create density and velocity time-series as inputs to magnetospheric simulations.

This study aims to provide a reference to different magnetic field models and reconstruction methods for interplanetary coronal mass ejections (ICMEs). In order to understand the differences in the outputs of those models and codes, we analyze 59 events from the Coordinated Data Analysis Workshop (CDAW) list, using four different magnetic field models and reconstruction techniques; force-free fitting (Goldstein,1983,Burlaga,1988,Lepping et al.,1990), magnetostatic reconstruction using a numerical solution to the Grad-Shafranov equation (Hu and Sonnerup, 2001), fitting to a self-similarly expanding cylindrical configuration (Marubashi and Lepping, 2007) and elliptical, non-force free fitting (Hidalgo,2003). The resulting parameters of the reconstructions for the 59 events are compared statistically, as well as in selected case studies. The ability of a method to fit or reconstruct an event is found to vary greatly: the Grad-Shafranov reconstruction is successful for most magnetic clouds (MCs) but for less than 10% of the non-MC ICMEs; the other three methods provide a successful fit for more than 65% of all events. The differences between the reconstruction and fitting methods are discussed, and suggestions are proposed as to how to reduce them. We find that the magnitude of the axial field is relatively consistent across models but not the orientation of the axis of the ejecta. We also find that there are a few cases for which different signs of the magnetic helicity are found for the same event when we do not fix the boundaries, illustrating that this simplest of parameters is not necessarily always well constrained by fitting and reconstruction models. Finally, we look at three unique cases in depth to provide a comprehensive idea of the different aspects of how the fitting and reconstruction codes work.