Neutrinos of astrophysical origin could be detected through the electromagnetic radiation of the particle showers induced in the atmosphere by their interaction in the Earth. This applies in particular for tau neutrinos of energies $E>10^{16}$eV following Earth-skimming trajectories. The $\sim1^{\circ}$ beaming of the radio emission in the forward direction however implies that the radio signal will likely fly above a detector deployed over a flat site and would therefore not be detected. We study here how a non-flat detector topography can improve the detection probability of these neutrino-induced air showers. We do this by computing with three distinct tools the neutrino detection efficiency for a radio array deployed over a toy-model mountainous terrain, also taking into account experimental and topographic constraints. We show in particular that ground topographies inclined by few degrees only induce detection efficiencies typically three times larger than those obtained for flat areas. We conclude that the topography of the area where the detector is deployed will be a key factor for an experiment like GRAND.

TURTLE is a C library providing utilities allowing to navigate through a topography described by a Digital Elevation Model (DEM). The library has been primarily designed for the Monte Carlo transport of particles scattering over medium to long ranges, e.g. atmospheric muons. But, it can also efficiently handle ray tracing problems with very large DEMs ($10^9$ nodes or more), e.g. for neutrino simulations. The TURTLE library was built on an optimistic ray tracing algorithm, detailed in the present paper. This algorithm proceeds by trials and errors, approximating the topography within the modelling uncertainties of the DEM data. This allows to traverse a topography in constant time, i.e. independently of the number of grid nodes, and with no added memory. Detailed performance studies are provided by comparison to other ray tracing algorithms and as an application to muon transport in a Monte Carlo simulation.

Over the last years, radio detection has matured to become a competitive method for the detection of air showers. Arrays of thousands of antennas are now envisioned for the detection of cosmic rays of ultra high energy or neutrinos of astrophysical origin. The data exploitation of such detectors requires to run massive air-shower simulations to evaluate the radio signal at each antenna position. In order to reduce the associated computational cost, we have developed a semi-analytical method for the computation of the emitted radio signal called Radio Morphing. The method consists in computing the radio signal of any air-shower at any location from the simulation of one single reference shower at given positions by i) a scaling of the electric-field amplitude of this reference shower, ii) an isometry on the simulated positions and iii) an interpolation of the radio pulse at the desired position. This technique enables one to compute electric field time traces with characteristics very similar to those obtained with standard computation methods, but with computation times reduced by several orders of magnitude. In this paper, we present this novel tool, explain its methodology, and discuss its limitations. Furthermore, we validate the method on a typical event set for the future GRAND experiment showing that the calculated peak amplitudes are consistent with the results from ZHAireS simulations with a mean offset of +8.5% and a standard deviation of 27.2% in this specific case. This overestimation of the signal strength by Radio Morphing arises mainly from the choice of the underlying reference shower.

The Giant Radio Array for Neutrino Detection (GRAND) is a planned large-scale observatory of ultra-high-energy (UHE) cosmic particles, with energies exceeding 10^8 GeV. Its goal is to solve the long-standing mystery of the origin of UHE cosmic rays. To do this, GRAND will detect an unprecedented number of UHE cosmic rays and search for the undiscovered UHE neutrinos and gamma rays associated to them with unmatched sensitivity. GRAND will use large arrays of antennas to detect the radio emission coming from extensive air showers initiated by UHE particles in the atmosphere. Its design is modular: 20 separate, independent sub-arrays, each of 10 000 radio antennas deployed over 10 000 km^2. A staged construction plan will validate key detection techniques while achieving important science goals early. Here we present the science goals, detection strategy, preliminary design, performance goals, and construction plans for GRAND.

TREND50 is a radio detection setup of 50 self-triggered antennas working in the 50-100MHz frequency range and deployed in a radio-quiet valley of the Tianshan mountains (China). TREND50 achieved its goal: the autonomous radiodetection and identification of air showers. Thanks to a dedicated offine selection algorithm, 564 air shower candidates were indeed selected out of $7\cdot10^8$ transient radio signals recorded during the 314 live days of data taken during the first two years of operation of this setup (2011 and 2012). This event rate, as well as the distribution of the candidate directions of arrival, is consistent with what is expected from cosmic-ray-induced air showers according to simulations, assuming an additional $\sim$20% contamination of the final sample by background events. This result is obtained at the cost of a reduced air shower detection efficiency, estimated to be $\sim$3%. This low efficiency is mostly due to the large amount of dead time of the setup. This result paves the way for the GRANDProto35 experiment, the first stage of the GRAND project.

Over the last decades, radio detection of air showers has been established as a promising detection technique for ultrahigh-energy cosmic rays and neutrinos. Very large or dense antenna arrays are necessary to be proficient at collecting information about these particles and understanding their properties accurately. The exploitation of such arrays requires to run massive air-shower simulations to evaluate the radio signal at each antenna position, taking into account features such as the ground topology. In order to reduce computational costs, we have developed a fast computation of the emitted radio signal on the basis of generic shower simulations, called Radio Morphing. The method consists in the calculation of the radio signal of any air-shower by i) a scaling of the electric-field amplitude of a reference air shower to the target shower, ii) an isometry on the simulated positions and iii) an interpolation of the radio pulse at the desired position. This technique enables one to gain many orders of magnitude in CPU time compared to a standard computation. In this contribution, we present this novel tool and explain its methodology. In particular, Radio Morphing will be a key element for the simulation chain of the Giant Radio Array for Neutrino Detection (GRAND) project, that aims at detecting ultra-high-energy neutrinos with an array of 200 000 radio antennas in mountainous regions.os with an array of 200 000 radio antennas in mountainous regions.

A preliminary version (v0.2.1) of the DANTON Monte-Carlo package is presented. DANTON allows the exclusive sampling of (decaying) $\tau$ generated by $\nu_\tau$ interactions with the Earth. The particles interactions with matter are simulated in detail, including transverse scattering. Detailed topography data of the Earth can be used as well. Yet, high Monte-Carlo efficiency is achieved by using a Backward Monte-Carlo technique. Some validation results are provided.

Over the last decades, radio detection of air showers has been established as a detection technique for ultra-high-energy cosmic-rays impinging on the Earth's atmosphere with energies far beyond LHC energies. Today's second-generation of digital radio-detection experiments, as e.g. AERA or LOFAR, are becoming competitive in comparison to already standard techniques e.g. fluorescence light detection. Thanks to a detailed understanding of the physics of the radio emission in extensive air showers, simulations of the radio signal are already successfully tested and applied in the reconstruction of cosmic rays. However, the limits of the computational power resources are easily reached when it comes to computing electric fields at the numerous positions requested by large or dense antenna arrays. In the case of mountainous areas as e.g. for the GRAND array, where 3D shower simulations are necessary, the problem arises with even stronger acuity. Therefore we developed a full parametrisation of the emitted radio signal on the basis of generic shower simulations which will reduce the simulation time by orders of magnitudes. In this talk we will present this concept after a short introduction to the concept of the radio detection of air-shower induced by cosmic rays.

We discuss a backward Monte-Carlo technique for muon transport problem, with emphasis on its application in muography. Backward Monte-Carlo allows exclusive sampling of a final state by reversing the simulation flow. In practice it can be made analogous to an adjoint Monte-Carlo, though it is more versatile for muon transport. A backward Monte-Carlo was implemented as a dedicated muon transport library: PUMAS. It is shown for case studies relevant for muography imaging that the implementations of forward and backward Monte-Carlo schemes agree to better than 1%.

The Giant Radio Array for Neutrino Detection (GRAND) aims at detecting ultra-high energy extraterrestrial neutrinos via the extensive air showers induced by the decay of tau leptons created in the interaction of neutrinos under the Earth's surface. Consisting of an array of $\sim10^5$ radio antennas deployed over $\sim 2\times10^5\,\rm {km}^2$, GRAND plans to reach, for the first time, an all-flavor sensitivity of $\sim1.5\times10^{-10} \,\rm GeV\, cm^{-2} \,s^{-1}\, sr^{-1}$ above $5\times10^{17}$ eV and a sub-degree angular resolution, beyond the reach of other planned detectors. We describe here preliminary designs and simulation results, plans for the ongoing, staged approach to the construction of GRAND, and the rich research program made possible by GRAND's design sensitivity and angular resolution.

The Giant Radio Array for Neutrino Detection (GRAND) is a planned array of ~200 000 radio antennas deployed over ~200 000 km2 in a mountainous site. It aims primarly at detecting high-energy neutrinos via the observation of extensive air showers induced by the decay in the atmosphere of taus produced by the interaction of cosmic neutrinos under the Earth surface. GRAND aims at reaching a neutrino sensitivity of 5.10$^{11}$ E$^{-2}$ GeV$^{-1}$cm$^{-2}$s$^{-1}$sr$^{-1}$ above 3.10$^{16}$ eV. This ensures the detection of cosmogenic neutrinos in the most pessimistic source models, and ~50 events per year are expected for the standard models. The instrument will also detect UHECRs and possibly FRBs. Here we show how our preliminary design should enable us to reach our sensitivity goals, and discuss the steps to be taken to achieve GRAND.

High-energy neutrino astronomy will probe the working of the most violent phenomena in the Universe. The Giant Radio Array for Neutrino Detection (GRAND) project consists of an array of $\sim10^5$ radio antennas deployed over $\sim$200000km$^2$ in a mountainous site. It aims at detecting high-energy neutrinos via the measurement of air showers induced by the decay in the atmosphere of $\tau$ leptons produced by the interaction of the cosmic neutrinos under the Earth surface. Our objective with GRAND is to reach a neutrino sensitivity of $3\times10^{-11}E^{-2}$GeV$^{-1}$cm$^{-2}$s$^{-1}$sr$^{-1}$ above $3 \times10^{16}$eV. This sensitivity ensures the detection of cosmogenic neutrinos in the most pessimistic source models, and about 100 events per year are expected for the standard models. GRAND would also probe the neutrino signals produced at the potential sources of UHECRs. We show how our preliminary design should enable us to reach our sensitivity goals, and present the experimental characteristics. We assess the possibility to adapt GRAND to other astrophysical radio measurements. We discuss in this token the technological options for the detector and the steps to be taken to achieve the GRAND project.

The ANTARES neutrino telescope, located 40km off the coast of Toulon in the Mediterranean Sea at a mooring depth of about 2475m, consists of twelve detection lines equipped typically with 25 storeys. Every storey carries three optical modules that detect Cherenkov light induced by charged secondary particles (typically muons) coming from neutrino interactions. As these lines are flexible structures fixed to the sea bed and held taut by a buoy, sea currents cause the lines to move and the storeys to rotate. The knowledge of the position of the optical modules with a precision better than 10cm is essential for a good reconstruction of particle tracks. In this paper the ANTARES positioning system is described. It consists of an acoustic positioning system, for distance triangulation, and a compass-tiltmeter system, for the measurement of the orientation and inclination of the storeys. Necessary corrections are discussed and the results of the detector alignment procedure are described.

An antenna array devoted to the autonomous radio-detection of high energy cosmic rays is being deployed on the site of the 21 cm array radio telescope in XinJiang, China. Thanks in particular to the very good electromagnetic environment of this remote experimental site, self-triggering on extensive air showers induced by cosmic rays has been achieved with a small scale prototype of the foreseen antenna array. We give here a detailed description of the detector and present the first detection of extensive air showers with this prototype.

We investigate the acoustic detection method of 10^18-20 eV neutrinos in a Mediterranean Sea environment. The acoustic signal is re-evaluated according to dedicated cascade simulations and a complex phase dependant absorption model, and compared to previous studies. We detail the evolution of the acoustic signal as function of the primary shower characteristics and of the acoustic propagation range. The effective volume of detection for a single hydrophone is given taking into account the limitations due to sea bed and surface boundaries as well as refraction effects. For this 'benchmark detector' we present sensitivity limits to astrophysical neutrino fluxes, from which sensitivity bounds for a larger acoustic detector can be derived. Results suggest that with a limited instrumentation the acoustic method would be more efficient at extreme energies, above 10^20 eV.