We present observations of the HD 15115 debris disk from ALMA at 1.3 mm that capture this intriguing system with the highest resolution ($0.\!\!^{\prime\prime}6$ or $29$ AU) at millimeter wavelengths to date. This new ALMA image shows evidence for two rings in the disk separated by a cleared gap. By fitting models directly to the observed visibilities within a MCMC framework, we are able to characterize the millimeter continuum emission and place robust constraints on the disk structure and geometry. In the best-fit model of a power law disk with a Gaussian gap, the disk inner and outer edges are at $43.9\pm5.8$ AU ($0.\!\!^{\prime\prime}89\pm0.\!\!^{\prime\prime}12$) and $92.2\pm2.4$ AU ($1.\!\!^{\prime\prime}88\pm0.\!\!^{\prime\prime}49$), respectively, with a gap located at $58.9\pm4.5$~AU ($1.\!\!^{\prime\prime}2\pm0.\!\!^{\prime\prime}10$) with a fractional depth of $0.88\pm0.10$ and a width of $13.8\pm5.6$ AU ($0.\!\!^{\prime\prime}28\pm0.\!\!^{\prime\prime}11$). Since we do not see any evidence at millimeter wavelengths for the dramatic east-west asymmetry seen in scattered light, we conclude that this feature most likely results from a mechanism that only affects small grains. Using dynamical modeling and our constraints on the gap properties, we are able to estimate a mass for the possible planet sculpting the gap to be $0.16\pm0.06$ $M_\text{Jup}$.

Several technologies have been proposed for deflecting a hazardous Solar System object on a trajectory that would otherwise impact the Earth. The effectiveness of each technology depends on several characteristics of the given object, including its orbit and size. The distribution of these parameters in the likely population of Earth-impacting objects can thus determine which of the technologies are most likely to be useful in preventing a collision with the Earth. None of the proposed deflection technologies has been developed and fully tested in space. Developing every proposed technology is currently prohibitively expensive, so determining now which technologies are most likely to be effective would allow us to prioritize a subset of proposed deflection technologies for funding and development. We present a new model, the Deflector Selector, that takes as its input the characteristics of a hazardous object or population of such objects and predicts which technology would be able to perform a successful deflection. The model consists of a machine-learning algorithm trained on data produced by N-body integrations simulating the deflections. We describe the model and present the results of tests of the effectiveness of nuclear explosives, kinetic impactors, and gravity tractors on three simulated populations of hazardous objects.

We present two state-of-the-art models of the solar system, one corresponding to the present day and one to the Archean Eon 3.5 billion years ago. Each model contains spatial and spectral information for the star, the planets, and the interplanetary dust, extending to 50 AU from the sun and covering the wavelength range 0.3 to 2.5 micron. In addition, we created a spectral image cube representative of the astronomical backgrounds that will be seen behind deep observations of extrasolar planetary systems, including galaxies and Milky Way stars. These models are intended as inputs to high-fidelity simulations of direct observations of exoplanetary systems using telescopes equipped with high-contrast capability. They will help improve the realism of observation and instrument parameters that are required inputs to statistical observatory yield calculations, as well as guide development of post-processing algorithms for telescopes capable of directly imaging Earth-like planets.

Models of debris disk morphology are often focused on the effects of a planet orbiting interior to or within the disk. Nonetheless, an exterior planetary-mass perturber can also excite eccentricities in a debris disk, via Laplace-Lagrange secular perturbations in the coplanar case or Kozai-Lidov perturbations for mutually inclined companions and disks. HD 106906 is an ideal example of such a system, as it harbors a confirmed exterior 11 M_Jup companion at a projected separation of 650 au outside a resolved, asymmetric disk. We use collisional and dynamical simulations to investigate the interactions between the disk and the companion, and to use the disk's observed morphology to place constraints on the companion's orbit. We conclude that the disk's observed morphology is consistent with perturbations from the observed exterior companion. Generalizing this result, we suggest that exterior perturbers, as well as interior planets, should be considered when investigating the cause of observed asymmetries in a debris disk.

Debris disks often take the form of eccentric rings with azimuthal asymmetries in surface brightness. Such disks are often described as showing "pericenter glow", an enhancement of the disk brightness in regions nearest the central star. At long wavelengths, however, the disk apocenters should appear brighter than their pericenters: in the long wavelength limit, we find the apocenter/pericenter flux ratio scales as 1+e for disk eccentricity e. We produce new models of this "apocenter glow" to explore its causes and wavelength dependence and study its potential as a probe of dust grain properties. Based on our models, we argue that several far-infrared and (sub)millimeter images of the Fomalhaut and epsilon Eridani debris rings obtained with Herschel, JCMT, SHARC II, ALMA, and ATCA should be reinterpreted as suggestions or examples of apocenter glow. This reinterpretation yields new constraints on the disks' dust grain properties and size distributions.

The Disk Detective citizen science project aims to find new stars with 22 micron excess emission from circumstellar dust using data from NASA's WISE mission. Initial cuts on the AllWISE catalog provide an input catalog of 277,686 sources. Volunteers then view images of each source online in 10 different bands to identify false-positives (galaxies, background stars, interstellar matter, image artifacts, etc.). Sources that survive this online vetting are followed up with spectroscopy on the FLWO Tillinghast telescope. This approach should allow us to unleash the full potential of WISE for finding new debris disks and protoplanetary disks. We announce a first list of 37 new disk candidates discovered by the project, and we describe our vetting and follow-up process. One of these systems appears to contain the first debris disk discovered around a star with a white dwarf companion: HD 74389. We also report four newly discovered classical Be stars (HD 6612, HD 7406, HD 164137, and HD 218546) and a new detection of 22 micron excess around a previously known debris disk host star, HD 22128.

An increasing number of observations have shown that gaseous debris discs are not an exception. However, until now we only knew of cases around A stars. Here we present the first detection of 12CO (2-1) disc emission around an F star, HD 181327, obtained with ALMA observations at 1.3 mm. The continuum and CO emission are resolved into an axisymmetric disc with ring-like morphology. Using a Markov chain Monte Carlo method coupled with radiative transfer calculations we study the dust and CO mass distribution. We find the dust is distributed in a ring with a radius of 86.0 +- 0.4 AU and a radial width of 23.2 +- 1.0 AU. At this frequency the ring radius is smaller than in the optical, revealing grain size segregation expected due to radiation pressure. We also report on the detection of low level continuum emission beyond the main ring out to ~200 AU. We model the CO emission in the non-LTE regime and we find that the CO is co-located with the dust, with a total CO gas mass ranging between 1.2x10^-6 Mearth and 2.9x10^-6 Mearth, depending on the gas kinetic temperature and collisional partners densities. The CO densities and location suggest a secondary origin, i.e. released from icy planetesimals in the ring. We derive a CO+CO2 cometary composition that is consistent with Solar system comets. Due to the low gas densities it is unlikely that the gas is shaping the dust distribution.

The first indication of the presence of a circumstellar debris disk is usually the detection of excess infrared emission from the population of small dust grains orbiting the star. This dust is short-lived, requiring continual replenishment, and indicating that the disk must be excited by an unseen perturber. Previous theoretical studies have demonstrated that an eccentric planet orbiting interior to the disk will stir the larger bodies in the belt and produce dust via interparticle collisions. However, motivated by recent observations, we explore another possible mechanism for heating a debris disk: a stellar-mass perturber orbiting exterior to and inclined to the disk and exciting the disk particles' eccentricities and inclinations via the Kozai-Lidov mechanism. We explore the consequences of an exterior perturber on the evolution of a debris disk using secular analysis and collisional N-body simulations. We demonstrate that a Kozai-Lidov excited disk can generate a dust disk via collisions and we compare the results of the Kozai-Lidov excited disk with a simulated disk perturbed by an interior eccentric planet. Finally, we propose two observational tests of a dust disk that can distinguish whether the dust was produced by an exterior brown dwarf or stellar companion or an interior eccentric planet.

We report the discovery of a scattering component around the HD 141569 A circumstellar debris system, interior to the previously known inner ring. The discovered inner disk component, obtained in broadband optical light with HST/STIS coronagraphy, was imaged with an inner working angle of 0".25, and can be traced from 0".4 (~46 AU) to 1".0 (~116 AU) after deprojection using i=55deg. The inner disk component is seen to forward scatter in a manner similar to the previously known rings, has a pericenter offset of ~6 AU, and break points where the slope of the surface brightness changes. It also has a spiral arm trailing in the same sense as other spiral arms and arcs seen at larger stellocentric distances. The inner disk spatially overlaps with the previously reported warm gas disk seen in thermal emission. We detect no point sources within 2" (~232 AU), in particular in the gap between the inner disk component and the inner ring. Our upper limit of 9+/-3 M_J is augmented by a new dynamical limit on single planetary mass bodies in the gap between the inner disk component and the inner ring of 1 M_J, which is broadly consistent with previous estimates.

We present a new model of the $\beta$ Pictoris disk-and-planet system that simulates both the planetesimal collisions and the dynamics of the resulting dust grains, allowing us to model features and asymmetries in both thermal and scattered light images of the disk. Our two-part model first simulates the collisional and dynamical evolution of the planetesimals with the Superparticle-Method Algorithm for Collisions in Kuiper belts (SMACK) and then simulates the dynamical evolution of the resulting dust grains with a standard Bulirsch-Stoer N-body integrator. Given the observed inclination and eccentricity of the $\beta$ Pictoris b planet, the model neatly ties together several features of the disk: the central hole in the submillimeter images, the two-disk "x"-pattern seen in scattered light, and possibly even the clumpy gas seen by ALMA. We also find that most of the dust in the $\beta$ Pictoris system is likely produced outside the ring at 60-100 AU. Instead of a birth ring, this disk has a "stirring ring" at 60-100 AU where the high-velocity collisions produced by the secular wave launched by the planet are concentrated. The two-disk x-pattern arises because collisions occur more frequently at the peaks and troughs of the secular wave. The perturbations of the disk in this region create an azimuthally and vertically asymmetric spatial distribution of collisions, which could yield an azimuthal clump of gas without invoking resonances or an additional planet.

We analyze Spitzer IRS spectra of 110 B-, A-, F-, and G-type stars with optically thin infrared excess in the Scorpius-Centaurus (ScoCen) OB association. The age of these stars ranges from 11-17 Myr. We fit the infrared excesses observed in these sources by Spitzer IRS and Spitzer MIPS to simple dust models according to Mie theory. We find that nearly all the objects in our study can be fit by one or two belts of dust. Dust around lower mass stars appears to be closer in than around higher mass stars, particularly for the warm dust component in the two-belt systems, suggesting mass-dependent evolution of debris disks around young stars. For those objects with stellar companions, all dust distances are consistent with trunction of the debris disk by the binary companion. The gaps between several of the two-belt systems can place limits on the planets that might lie between the belts, potentially constraining the mass and locations of planets that may be forming around these stars.

We apply our 3D debris disk model, SMACK, to simulate a planet on a circular orbit near a ring of planetesimals that are experiencing destructive collisions. Previous simulations of a planet opening a gap in a collisionless debris disk have found that the width of the gap scales as the planet mass to the 2/7th power ($\alpha$=2/7). We find that the gap sizes in a collisional disk still obey a power law scaling with planet mass, but that the index alpha of the power law depends on the age of the system t relative to the collisional timescale $t_{coll}$ of the disk by $\alpha = 0.32(t/t_{coll})^{-0.04}$, with inferred planet masses up to five times smaller than those predicted by the classical gap law. The increased gap sizes likely stem from the interaction between the collisions and the mean motion resonances near the chaotic zone. We investigate the effects of the initial eccentricity distribution of the disk particles and find a negligible effect on the gap size at Jovian planet masses, since collisions tend to erase memory of the initial particle eccentricity distributions. Finally, we find that the presence of Trojan analogs is a potentially powerful diagnostic of planets in the mass range ~1-10 $M_{jup}$. We apply our model to place new upper limits on planets around Fomalhaut, HR 4796 A, HD 202628, HD 181327, and $\beta$ Pictoris.

We present the Superparticle Model/Algorithm for Collisions in Kuiper belts and debris disks (SMACK), a new method for simultaneously modeling, in 3-D, the collisional and dynamical evolution of planetesimals in a debris disk with planets. SMACK can simulate azimuthal asymmetries and how these asymmetries evolve over time. We show that SMACK is stable to numerical viscosity and numerical heating over 10^7 yr, and that it can reproduce analytic models of disk evolution. We use SMACK to model the evolution of a debris ring containing a planet on an eccentric orbit. Differential precession creates a spiral structure as the ring evolves, but collisions subsequently break up the spiral, leaving a narrower eccentric ring.