One of the major limitations of adaptive optics (AO) corrected image post-processing is the lack of knowledge on the system point spread function (PSF). The PSF is not always available as a direct imaging on isolated point like objects such as stars. Its prediction using AO telemetry also suffers from serious limitations and requires complex and yet not fully operational algorithms. A very attractive solution consists in a direct PSF estimation using the scientific images themselves thanks to blind or myopic post-processing approaches. We demonstrate that such approaches suffer from severe limitations when a joint restitution of object and PSF parameters is performed. As an alternative we propose here a marginalized PSF identification that overcomes this limitation. Then the PSF is used for image post-processing. Here we focus on deconvolution, a post-processing technique to restore the object, given the image and the PSF. We show that the PSF estimated by marginalisation provides good quality deconvolution. The full process of marginalized PSF estimation and deconvolution constitutes a successful blind deconvolution technique. It is tested on simulated data to measure its performance. It is also tested on experimental adaptive optics images of the asteroid 4-Vesta by VLT/SPHERE/Zimpol to demonstrate application to on-sky data.

Extremely Large Telescopes have overwhelmingly opted for the Pyramid wavefront sensor (PyWFS) over the more widely used Shack-Hartmann WaveFront Sensor (SHWFS) to perform their Single Conjugate Adaptive Optics (SCAO) mode. The PyWFS, a sensor based on Fourier filtering, has proven to be highly successful in many astronomy applications. However, it exhibits non-linearity behaviors that lead to a reduction of its sensitivity when working with non-zero residual wavefronts. This so-called Optical Gains (OG) effect, degrades the close loop performance of SCAO systems and prevents accurate correction of Non-Common Path Aberrations (NCPA). In this paper, we aim at computing the OG using a fast and agile strategy in order to control the PyWFS measurements in adaptive optics closed loop systems. Using a novel theoretical description of the PyFWS, which is based on a convolutional model, we are able to analytically predict the behavior of the PyWFS in closed-loop operation. This model enables us to explore the impact of residual wavefront error on particular aspects such as sensitivity and associated OG. The proposed method relies on the knowledge of the residual wavefront statistics and enables automatic estimation of the current OG. End-to-End numerical simulations are used to validate our predictions and test the relevance of our approach. We demonstrate, using on non-invasive strategy, that our method provides an accurate estimation of the OG. The model itself only requires AO telemetry data to derive statistical information on atmospheric turbulence. Furthermore, we show that by only using an estimation of the current Fried parameter r_0 and the basic system-level characteristics, OGs can be estimated with an accuracy of less than 10%. Finally, we highlight the importance of OG estimation in the case of NCPA compensation. The proposed method is applied to the PyWFS.

The performance of tomographic adaptive optics systems is intrinsically linked to the vertical profile of optical turbulence. Firstly, a sufficient number of discrete turbulent layers must be reconstructed to model the true continuous turbulence profile. Secondly over the course of an observation, the profile as seen by the telescope changes and the tomographic reconstructor must be updated. These changes can be due to the unpredictable evolution of turbulent layers on meteorological timescales as short as minutes. Here we investigate the effect of changing atmospheric conditions on the quality of tomographic reconstruction by coupling fast analytical adaptive optics simulation to a large database of 10 691 high resolution turbulence profiles measured over two years by the Stereo-SCIDAR instrument at ESO Paranal, Chile. This work represents the first investigation of these effects with a large, statistically significant sample of turbulence profiles. The statistical nature of the study allows us to assess not only the degradation and variability in tomographic error with a set of system parameters (e.g. number of layers, temporal update period) but also the required parameters to meet some error threshold. In the most challenging conditions where the profile is rapidly changing, these parameters must be far more tightly constrained in order to meet this threshold. By providing estimates of these constraints for a wide range of system geometries as well as the impact of different temporal optimisation strategies we may assist the designers of tomographic AO for the ELT to dimension their systems.

Current designs for all three extremely large telescopes show the overwhelming adoption of the pyramid wavefront sensor (P-WFS) as the WFS of choice for adaptive optics (AO) systems sensing on natural guide stars (NGS) or extended objects. The key advantages of the P-WFS over the Shack-Hartmann are known and are mainly provided by the improved sensitivity (fainter NGS) and reduced sensitivity to spatial aliasing. However, robustness and tolerances of the P-WFS for the ELTs are not currently well understood. In this paper, we present simulation results for the single-conjugate AO mode of HARMONI, a visible and near-infrared integral field spectrograph for the European Extremely Large Telescope. We first explore the wavefront sensing issues related to the telescope itself; namely the island effect (i.e. differential piston) and M1 segments phasing errors. We present mitigation strategies to the island effect and their performance. We then focus on some performance optimisation aspects of the AO design to explore the impact of the RTC latency and the optical gain issues, which will in particular affect the high-contrast mode of HARMONI. Finally, we investigate the influence of the quality of glass pyramid prism itself, and of optical aberrations on the final AO performance. By relaxing the tolerances on the fabrication of the prism, we are able to reduce hardware costs and simplify integration. We show the importance of calibration (i.e. updating the control matrix) to capture any displacement of the telescope pupil and rotation of the support structure for M4. We also show the importance of the number of pixels used for wavefront sensing to relax tolerances of the pyramid prism. Finally, we present a detailed optical design of the pyramid prism, central element of the P-WFS.

Here we describe a simple, efficient, and most importantly fully operational point-spread-function(PSF)-reconstruction approach for laser-assisted ground layer adaptive optics (GLAO) in the frame of the Multi Unit Spectroscopic Explorer (MUSE) Wide Field Mode. Based on clear astrophysical requirements derived by the MUSE team and using the functionality of the current ESO Adaptive Optics Facility we aim to develop an operational PSF-reconstruction (PSFR) algorithm and test it both in simulations and using on-sky data. The PSFR approach is based on a Fourier description of the GLAO correction to which the specific instrumental effects of MUSE Wide Field Mode (pixel size, internal aberrations, etc.) have been added. It was first thoroughly validated with full end-to-end simulations. Sensitivity to the main atmospheric and AO system parameters was analysed and the code was re-optimised to account for the sensitivity found. Finally, the optimised algorithm was tested and commissioned using more than one year of on-sky MUSE data. We demonstrate with an on-sky data analysis that our algorithm meets all the requirements imposed by the MUSE scientists, namely an accuracy better than a few percent on the critical PSF parameters including full width at half maximum and global PSF shape through the kurtosis parameter of a Moffat function. The PSFR algorithm is publicly available and is used routinely to assess the MUSE image quality for each observation. It can be included in any post-processing activity which requires knowledge of the PSF.

Since the year 2000, adaptive optics (AO) has seen the emergence of a variety of new concepts addressing particular science needs; multiconjugate adaptive optics (MCAO) is one of them. By correcting the atmospheric turbulence in 3D using several wavefront sensors and a tomographic phase reconstruction approach, MCAO aims to provide uniform diffraction limited images in the near-infrared over fields of view larger than 1 arcmin square, i.e., 10 to 20 times larger in area than classical single conjugated AO. In this review, we give a brief reminder of the AO principles and limitations, and then focus on aspects particular to MCAO, such as tomography and specific MCAO error sources. We present examples and results from past or current systems: MAD (Multiconjugate Adaptive Optics Demonstrator) and GeMS (Gemini MCAO System) for nighttime astronomy and the AO system, at Big Bear for solar astronomy. We examine MCAO performance (Strehl ratio up to 40percent in H band and full width at half maximum down to 52 mas in the case of MCAO), with a particular focus on photometric and astrometric accuracy, and conclude with considerations on the future of MCAO in the Extremely Large Telescope and post-HST era.

Point spread function (PSF) reconstruction (PSF-R) is a well established technique to determine reliably and accurately the PSF from Adaptive Optics (AO) control loop data. We have successfully applied this technique to improve the precision on photometry and astrometry to observation of NGC6121 obtained with SPHERE/ZIMPOL as it will be presented in a forthcoming letter. Firstly, we present the methodology we followed to reconstruct the PSF combining pupil-plane and focal-plane measurements using using our PSF-R method PRIME (Beltramo-Martin et al. 2019), with upgrade of both the model and best-fitting steps compared to previous papers. Secondly, we highlight that PRIME allows to maintain the PSF fitting residual below 0.2% over 2 hours of observation and using only 30 s of AO telemetry, which may have important consequences for telemetry storage for PSF-R purpose on future 30-40 m class telescopes. Finally, we deploy PRIME in a more realistic regime using faint stars so as to identify the precision needed on the initial guess parameters to ensure the convergence towards the optimal solution.

Context. Adaptive optics (AO) systems greatly increase the resolution of large telescopes, but produce complex point spread function (PSF) shapes, varying in time and across the field of view. This PSF must be accurately known since it provides crucial information about optical systems for design, characterisation, diagnostics and image post processing. Aims. We develop here a model of the AO long exposure PSF, adapted to various seeing conditions and any AO system. This model is made to match accurately both the core of the PSF and its turbulent halo. Methods. The PSF model we develop is based on a parsimonious parameterization of the phase power spectral density with only five parameters to describe circularly symmetric PSFs and seven parameters for asymmetrical ones. Moreover, one of the parameters is directly the Fried parameter r0 of the turbulence s strength. This physical parameter is an asset in the PSF model since it can be correlated with external measurements of the r0, such as phase slopes from the AO real time computer (RTC) or site seeing monitoring. Results. We fit our model against endtoend simulated PSFs using OOMAO tool, and against on sky PSFs from the SPHERE ZIMPOL imager and the MUSE integral field spectrometer working in AO narrowfield mode. Our model matches the shape of the AO PSF both in the core and the halo, with a sub 1 percent relative error for simulated and experimental data. We also show that we retrieve the r0 parameter with subcentimeter precision on simulated data. For ZIMPOL data, we show a correlation of 97 percent between our r0 estimation and the RTC estimation. Finally, MUSE allows us to test the spectral dependency of the fitted r0 parameter. It follows the theoretical $\lambda^{6/5}$ evolution with a standard deviation of 0.3 cm. Evolution of other PSF parameters, such as residual phase variance or aliasing, is also discussed.

As part of the National Science Foundation funded "Gemini in the Era of MultiMessenger Astronomy" (GEMMA) program, Gemini Observatory is developing GNAO, a widefield adaptive optics (AO) facility for Gemini-North on Maunakea, the only 8m-class open-access telescope available to the US astronomers in the northern hemisphere. GNAO will provide the user community with a queue-operated Multi-Conjugate AO (MCAO) system, enabling a wide range of innovative solar system, Galactic, and extragalactic science with a particular focus on synergies with JWST in the area of time-domain astronomy. The GNAO effort builds on institutional investment and experience with the more limited block-scheduled Gemini Multi-Conjugate System (GeMS), commissioned at Gemini South in 2013. The project involves close partnerships with the community through the recently established Gemini AO Working Group and the GNAO Science Team, as well as external instrument teams. The modular design of GNAO will enable a planned upgrade to a Ground Layer AO (GLAO) mode when combined with an Adaptive Secondary Mirror (ASM). By enhancing the natural seeing by an expected factor of two, GLAO will vastly improve Gemini North's observing efficiency for seeing-limited instruments and strengthen its survey capabilities for multi-messenger astronomy.

In this paper, we describe Fourier-based Wave Front Sensors (WFS) as linear integral operators, characterized by their Kernel. In a first part, we derive the dependency of this quantity with respect to the WFS's optical parameters: pupil geometry, filtering mask, tip/tilt modulation. In a second part we focus the study on the special case of convolutional Kernels. The assumptions required to be in such a regime are described. We then show that these convolutional kernels allow to drastically simplify the WFS's model by summarizing its behavior in a concise and comprehensive quantity called the WFS's Impulse Response. We explain in particular how it allows to compute the sensor's sensitivity with respect to the spatial frequencies. Such an approach therefore provides a fast diagnostic tool to compare and optimize Fourier-based WFSs. In a third part, we develop the impact of the residual phases on the sensor's impulse response, and show that the convolutional model remains valid. Finally, a section dedicated to the Pyramid WFS concludes this work, and illustrates how the slopes maps are easily handled by the convolutional model.

For extremely large telescopes, adaptive optics will be required to correct the Earth's turbulent atmosphere. The performance of tomographic adaptive optics is strongly dependent on the vertical distribution (profile) of this turbulence. An important way in which this manifests is the tomographic error, arising from imperfect measurement and reconstruction of the turbulent phase at altitude. Conventionally, a small number of reference profiles are used to obtain this error in simulation however these profiles are not constructed to be representative in terms of tomographic error. It is therefore unknown whether these simulations are providing realistic performance estimates. Here, we employ analytical adaptive optics simulation that drastically reduces computation times to compute tomographic error for 10 691 measurements of the turbulence profile gathered by the Stereo-SCIDAR instrument at ESO Paranal. We assess for the first time the impact of the profile on tomographic error in a statistical manner. We find, in agreement with previous work, that the tomographic error is most directly linked with the distribution of turbulence into discrete, stratified layers. Reference profiles are found to provide mostly higher tomographic error than expected, which we attribute to the fact that these profiles are primarily composed of averages of many measurements resulting in unrealistic, continuous distributions of turbulence. We propose that a representative profile should be defined with respect to a particular system, and that as such simulations with a large statistical sample of profiles must be an important step in the design process.

Wavefront sensors encode phase information of an incoming wavefront into an intensity pattern that can be measured on a camera. Several kinds of wavefront sensors (WFS) are used in astronomical adaptive optics. Amongst them, Fourier-based wavefront sensors perform a filtering operation on the wavefront in the focal plane. The most well known example of a WFS of this kind is the Zernike wavefront sensor, and the pyramid wavefront sensor (PWFS) also belongs to this class. Based on this same principle, new WFSs can be proposed such as the n-faced pyramid (which ultimately becomes an axicone) or the flattened pyramid, depending on whether the image formation is incoherent or coherent. In order to test such novel concepts, the LOOPS adaptive optics testbed hosted at the Laboratoire d'Astrophysique de Marseille has been upgraded by adding a Spatial Light Modulator (SLM). This device, placed in a focal plane produces high-definition phase masks that mimic otherwise bulk optic devices. In this paper, we first present the optical design and upgrades made to the experimental setup of the LOOPS bench. Then, we focus on the generation of the phase masks with the SLM and the implications of having such a device in a focal plane. Finally, we present the first closed-loop results in either static or dynamic mode with different WFS applied on the SLM.

In order to enhance accuracy of astrophysical estimates obtained on Adaptive-optics (AO) images, such as photometry and astrometry, we investigate a new concept to constrain the Point Spread Function (PSF) model called PSF Reconstruction and Identification for Multi-sources characterization Enhancement (PRIME), that handles jointly the science image and the AO control loop data. We present in this paper the concept of PRIME and validate it on Keck II telescope NIRC2 images. We show that by calibrating the PSF model over the scientific image, PSF reconstruction achieves 1\% and 3 mas of accuracy on respectively the Strehl-ratio and the PSF full width at half maximum. We show on NIRC2 binary images that PRIME is sufficiently robust to noise to retain photometry and astrometry precision below 0.005 mag and 100$\mu$as on a $m_H=$ 14 mag object. Finally, we also validate that PRIME performs a PSF calibration on the triple system Gl569BAB which provides a separation of 66.73$\pm 1.02$ and a differential photometry of 0.538$\pm 0.048$, compared to the reference values obtained with the extracted PSF which are 66.76 mas $\pm$ 0.94 and 0.532 mag $\pm$ 0.041.

Context. Over the past decades, several interplanetary missions have studied small bodies in situ, leading to major advances in our understanding of their geological and geophysical properties. These missions, however, have had a limited number of targets. Among them, the NASA Dawn mission has characterised in detail the topography and albedo variegation across the surface of asteroid (4) Vesta down to a spatial resolution of approximately 20 m/pixel scale. Aims. Here our aim was to determine how much topographic and albedo information can be retrieved from the ground with VLT/SPHERE in the case of Vesta, having a former space mission (Dawn) providing us with the ground truth that can be used as a benchmark. Methods. We observed Vesta with VLT/SPHERE/ZIMPOL as part of our ESO large programme (ID 199.C-0074) at six different epochs, and deconvolved the collected images with a parametric point spread function (PSF). We then compared our images with synthetic views of Vesta generated from the 3D shape model of the Dawn mission, on which we projected Vesta's albedo information. Results. We show that the deconvolution of the VLT/SPHERE images with a parametric PSF allows the retrieval of the main topographic and albedo features present across the surface of Vesta down to a spatial resolution of approximately 20-30 km. Contour extraction shows an accuracy of approximately 1 pixel (3.6 mas). The present study provides the very first quantitative estimate of the accuracy of ground-based adaptive-optics imaging observations of asteroid surfaces. Conclusions. In the case of Vesta, the upcoming generation of 30-40m telescopes (ELT, TMT, GMT) should in principle be able to resolve all of the main features present across its surface, including the troughs and the north-south crater dichotomy, provided that they operate at the diffraction limit.

Ground-based astronomy is severely limited by the atmospheric turbulence, resulting in a large Point-Spread-Function (PSF) and poor imaging resolution. Even imaging with Adaptive Optics (AO) cannot completely correct the aberrated wavefront, and a residual turbulence still corrupts the observation. Thus the consequences of the turbulence on the PSF is of first interest when building any ground-based telescope. The Power Spectral Density (PSD) of a spatially stationary turbulent phase carries all the information needed for describing the long-exposure PSF. We then develop an analytical description of the long-exposure PSF as a series expansion of the aberrated phase PSD. Our description of the PSF given the PSD of the phase is a simple theoretical way to describe the impact of turbulence on the PSF. We also show accordance with previous papers when restricting our model to its first expansion order. Finally we derive applications of our formula to some particular cases, such as Kolmogorov or von-K\'arm\'an models, or the AO correction impact on the PSF.

Several telescopes include large Deformable Mirrors (DM) located directly inside the telescope. These adaptive telescopes trigger new constraints for the calibration of the Adaptive Optics (AO) systems as they usually offer no access to an artificial calibration source for the interaction matrix measurement. Moreover, the optical propagation between the DM and the Wave-Front Sensor (WFS) may evolve during the operation, resulting in mis-registrations that highly affect the AO performance and thus the scientific observation. They have to be measured and compensated, for instance by updating the calibration. A new strategy consists of estimating the mis-registrations and injecting them into synthetic models to generate noise-free interaction matrices. This pseudo-synthetic approach is the baseline for the Adaptive Optics Facility working with a Shack-Hartmann WFS and seems particularly suited for the future Extremely Large Telescope as the calibration will have to be regularly updated, for a large numbers of actuators. In this paper, the feasibility of a pseudo synthetic calibration with Pyramid WFS at the Large Binocular Telescope (LBT) is investigated. A synthetic model of the LBT AO systems is developed, and the procedure to adjust the mis-registrations parameters is introduced, extracting them from an experimental interaction matrix. We successfully tested an interaction matrix generated from the model on the real system in high-order AO mode. We recorded a slightly better performance with respect to the experimental one. This work demonstrates that a high accuracy calibration can be obtained using the pseudo synthetic approach with pyramid WFS.

The European Extremely Large Telescope will see first lights by the end of 2024. With a diameter of almost 40 meters, it will be the biggest optical telescope ever built from the ground. The ELT will open a brand new window in a sensitivity / spatial angular resolution parameter space. To take the full benefit of the scientific potential of this giant, all the instruments will be equipped with Adaptive Optics (AO), providing the sharpest images. This paper provides a quick overview of the AO capabilities of the future instruments to be deployed at the ELT, highlight some of the expected performance and describe a couple of technical challenges that are still to tackle for an optimal scientific use. This paper has been presented at the "Societe Francaise d'Astronomie et Astrophysique" symposium in Bordeaux 2018, it is then naturally biased toward the French contribution for the ELT.

Knowledge of the atmospheric turbulence in the telescope line-of-sight is crucial for wide-field observations assisted by adaptive optics (AO), for which the Point Spread Function (PSF) becomes strongly elongated due to the anisoplanatism effect. This one must be modelled accurately to extrapolate the PSF anywhere across the Field of view (FOV) and improve the science exploitation. However, anisoplanatism is a function of the Cn2(h) profile, that is not directly accessible from single conjugate AO telemetry. One may rely on external profilers, but recent studies have highlighted more than 10% of discrepancies with AO internal measurements, while we aim better than 1% of accuracy for PSF modelling. To tackle this existing limitation, we present the Focal plane profiling (FPP), as a $C_n^2(h)$ profiling method that relies on post-AO focal plane images. We demonstrate such an approach complies with a 1%-level of accuracy on the $C_n^2(h)$ estimation and establish how this accuracy varies regarding the calibration stars magnitudes and positions in the field. We highlight that photometry and astrometry errors due to PSF mis-modelling reaches respectively 1% and 50{\mu}as using FPP on a Keck baseline, with a preliminary calibration using a star of magnitude H=14 at 20". We also validate this concept using Canadas NRC-Herzberg HENOS testbed images in comparing FPP retrieval with alternative $C_n^2(h)$ measurements on HeNOS. The FPP approach allows to profile the $C_n^2(h)$ using the SCAO systems and improve significantly the PSF characterisation. Such a methodology is also ELT-size compliant and will be extrapolated to tomographic systems in a near future.

HARMONI is a visible and near-infrared integral field spectrograph equipped with two complementary adaptive optics systems, fully integrated within the instrument. A Single Conjugate AO (SCAO) system offers high performance for a limited sky coverage and a Laser Tomographic AO (LTAO) system provides AO correction with a very high sky-coverage. While the deformable mirror performing real-time correction of the atmospheric disturbances is located within the telescope itself, the instrument contains a suite of state-of-the-art and innovative wavefront sensor systems. Laser guide star sensors (LGSS) are located at the entrance of the instrument and fed by a dichroic beam splitter, while the various natural guide star sensors for LTAO and SCAO are located close to the science focal plane. We present opto-mechanical architecture and design at PDR level for these wavefront sensor systems.

Tomographic wave-front reconstruction is the main computational bottleneck to realize real-time correction for turbulence-induced wave-front aberrations in future laser-assisted tomographic adaptive-optics (AO) systems for ground-based Giant Segmented Mirror Telescopes (GSMT), because of its unprecedented number of degrees of freedom, $N$, i.e. the number of measurements from wave-front sensors (WFS). In this paper, we provide an efficient implementation of the minimum-mean-square error (MMSE) tomographic wave-front reconstruction mainly useful for some classes of AO systems not requiring a multi-conjugation, such as laser-tomographic AO (LTAO), multi-object AO (MOAO) and ground-layer AO (GLAO) systems, but also applicable to multi-conjugate AO (MCAO) systems. This work expands that by R. Conan [ProcSPIE, 9148, 91480R (2014)] to the multi-wave-front, tomographic case using natural and laser guide stars. The new implementation exploits the Toeplitz structure of covariance matrices used in a MMSE reconstructor, which leads to an overall $O(N\log N)$ real-time complexity compared to $O(N^2)$ of the original implementation using straight vector-matrix multiplication. We show that the Toeplitz-based algorithm leads to 60\,nm rms wave-front error improvement for the European Extremely Large Telescope Laser-Tomography AO system over a well-known sparse-based tomographic reconstruction, but the number of iterations required for suitable performance is still beyond what a real-time system can accommodate to keep up with the time-varying turbulence

HARMONI is a visible and NIR integral field spectrograph, providing the E-ELT's core spectroscopic capability at first light. HARMONI will work at the diffraction limit of the E-ELT, thanks to a Classical and a Laser Tomographic AO system. In this paper, we present the system choices that have been made for these SCAO and LTAO modules. In particular, we describe the strategy developed for the different Wave-Front Sensors: pyramid for SCAO, the LGSWFS concept, the NGSWFS path, and the truth sensor capabilities. We present first potential implementations. And we asses the first system performance.

Adaptive optics (AO) restore the angular resolution of ground-based telescopes, but at the cost of delivering a time- and space-varying point spread function (PSF) with a complex shape. PSF knowledge is crucial for breaking existing limits on the measured accuracy of photometry and astrometry in science observations. In this paper, we concentrate our analyses on anisoplanatism signature only onto PSF: for large-field observations (20") with single- conjugated AO, PSFs are strongly elongated due to anisoplanatism that manifests itself as three different terms for Laser-guide star (LGS) systems: angular, focal and tilt. We propose a generalized model that relies on a point-wise decomposition of the phase and encompasses the non-stationarity of LGS systems. We demonstrate it is more accurate and less computationally demanding than existing models: it agrees with end-to-end physical-optics simulations to within 0.1% of PSF measurables, such as Strehl-ratio, FWHM and fraction of variance unexplained.Secondly, we study off-axis PSF modelling is with respect to $C_n^2(h)$ profile (heights and fractional weights). For 10m class telescope, PSF morphology is estimated at 1% level as long as we model the atmosphere with at least 7 layers whose heights and weights are known respectively with 200m and 10% precision. As a verification test we used the Canada's NRC-Herzberg HeNOS testbed data, featuring four lasers. We highlight capability of retrieving off-axis PSF characteristics within 10% of fraction of variance unexplained, which complies with the expected range from the sensitivity analysis. Our new off-axis PSF modelling method lays the ground-work for testing on-sky in the near future.

Wide Field Adaptive Optics (WFAO) systems are among the most sophisticated AO systems available today on large telescopes. The knowledge of the vertical spatio-temporal distribution of the wind speed (WS) and direction (WD) are fundamental to optimize the performance of such systems. Previous studies already proved that the Gemini Multi-Conjugated AO system (GeMS) is able to retrieve measurements of the WS and WD stratification using the SLODAR technique and to store measurements in the telemetry data. In order to assess the reliability of these estimates and of the SLODAR technique applied to such a kind of complex AO systems, in this study we compared WS and WD retrieved from GeMS with those obtained with the atmospherical model Meso-Nh on a rich statistical sample of nights. It has been previously proved that, the latter technique, provided an excellent agreement with a large sample of radiosoundings both, in statistical terms and on individual flights. It can be considered, therefore, as an independent reference. The excellent agreement between GeMS measurements and the model that we find in this study, proves the robustness of the SLODAR approach. To by-pass the complex procedures necessary to achieve automatic measurements of the wind with GeMS, we propose a simple automatic method to monitor nightly WS and WD using the Meso-Nh model estimates. Such a method can be applied to whatever present or new generation facilities supported by WFAO systems. The interest of this study is, therefore, well beyond the optimization of GeMS performance.

In the present paper, we consider the optical design of a zoom system for the active refocusing in laser guide star wavefront sensors. The system is designed according to the specifications coming from the Extremely Large Telescope (ELT)-HARMONI instrument, the first-light, integral field spectrograph for the European (E)-ELT. The system must provide a refocusing of the laser guide as a function of telescope pointing and large decentring of the incoming beam. The system considers four moving lens groups, each of them being a doublet with one aspherical surface. The advantages and shortcomings of such a solution in terms of the component displacements and complexity of the surfaces are described in detail. It is shown that the system can provide the median value of the residual wavefront error of 13.8-94.3 nm and the maximum value <206 nm, while the exit pupil distortion is 0.26-0.36% for each of the telescope pointing directions.

Whether is ground-based or space-based, any optical instrument suffers from some amount of optical geometric distortion. Recently, the diffraction-limited image quality afforded by space-based telescopes and by Adaptive Optics (AO) corrected instruments on ground based-telescope, have increased the relative importance of the error terms induced by optical distortions. In particular, variable distortions present in Multi-Conjugated Adaptive Optics (MCAO) data are limiting the astrometry and photometry accuracy of such high resolution instruments. From there, the ability to deal with those phenomenon had become a critical issue for high-precision studies. We present in this paper an optimal method of distortion correction for high angular resolution images. Based on a prior-knowledge of the static distortion the method aims to correct the dynamical distortions specifically for each observation set and each frame. The method follows an inverse problem approach based on the work done by Gratadour et al. 2005 on image re-centering, and we aim to generalized it to any kind of distortion mode. The complete formalism of a Weighted Least Square minimization, as well as a detailed characterization of the error budget are presented. In particular we study the influence of different parameters such as the number of frames and the density of the field (sparse or crowed images), of the noise level, and of the aliasing effect. Finally, we show the first application of the method on real observations collected with the Gemini MCAO instrument, GeMS/GSAOI. The performance as well as the gain brought by this method are presented.

At a distance of 2~pc, our nearest brown dwarf neighbor, Luhman 16 AB, has been extensively studied since its discovery 3 years ago, yet its most fundamental parameter -- the masses of the individual dwarfs -- has not been constrained with precision. In this work we present the full astrometric orbit and barycentric motion of Luhman 16 AB and the first precision measurements of the individual component masses. We draw upon archival observations spanning 31 years from the European Southern Observatory (ESO) Schmidt Telescope, the Deep Near-Infrared Survey of the Southern Sky (DENIS), public FORS2 data on the Very Large Telescope (VLT), and new astrometry from the Gemini South Multiconjugate Adaptive Optics System (GeMS). Finally, we include three radial velocity measurements of the two components from VLT/CRIRES, spanning one year. With this new data sampling a full period of the orbit, we use a Markov Chain Monte Carlo algorithm to fit a 16-parameter model incorporating mutual orbit and barycentric motion parameters and constrain the individual masses to be~$27.9^{+1.1}_{-1.0}$~$M_{J}$ for the T dwarf and~$34.2^{+1.3}_{-1.1}$~$M_{J}$ for the L dwarf. Our measurements of Luhman 16 AB's mass ratio and barycentric motion parameters are consistent with previous estimates in the literature utilizing recent astrometry only. The GeMS-derived measurements of the Luhman 16 AB separation in 2014-2015 agree closely with Hubble Space Telescope (HST) measurements made during the same epoch Bedin et al. 2017, and the derived mutual orbit agrees with those measurements to within the HST uncertainties of $0.3 - 0.4$ milliarcseconds.

The use of Fourier methods in wave-front reconstruction can significantly reduce the computation time for large telescopes with a high number of degrees of freedom. However, Fourier algorithms for discrete data require a rectangular data set which conform to specific boundary requirements, whereas wave-front sensor data is typically defined over a circular domain (the telescope pupil). Here we present an iterative Gerchberg routine modified for the purposes of discrete wave-front reconstruction which adapts the measurement data (wave-front sensor slopes) for Fourier analysis, fulfilling the requirements of the Fast Fourier Transform (FFT) and providing accurate reconstruction. The routine is used in the adaptation step only and can be coupled to any other Wiener-like or least-squares method. We compare simulations using this method with previous Fourier methods and show an increase in performance in terms of Strehl ratio and a reduction in noise propagation for a 40x40 SPHERE-like adaptive optics system. For closed loop operation with minimal iterations the Gerchberg method provides an improvement in Strehl, from 95.4% to 96.9% in K-band. This corresponds to ~40 nm improvement in rms, and avoids the high spatial frequency errors present in other methods, providing an increase in contrast towards the edge of the correctable band.

We present a proper motion measurement for the halo globular cluster Pyxis, using HST/ACS data as the first epoch, and GeMS/GSAOI Adaptive Optics data as the second, separated by a baseline of about 5 years. This is both the first measurement of the proper motion of Pyxis and the first calibration and use of Multi-Conjugate Adaptive Optics data to measure an absolute proper motion for a faint, distant halo object. Consequently, we present our analysis of the Adaptive Optics data in detail. We obtain a proper motion of mu_alpha cos(delta)=1.09+/-0.31 mas/yr and mu_delta=0.68+/-0.29 mas/yr. From the proper motion and the line-of-sight velocity we find the orbit of Pyxis is rather eccentric with its apocenter at more than 100 kpc and its pericenter at about 30 kpc. We also investigate two literature-proposed associations for Pyxis with the recently discovered ATLAS stream and the Magellanic system. Combining our measurements with dynamical modeling and cosmological numerical simulations we find it unlikely Pyxis is associated with either system. We examine other Milky Way satellites for possible association using the orbit, eccentricity, metallicity, and age as constraints and find no likely matches in satellites down to the mass of Leo II. We propose that Pyxis probably originated in an unknown galaxy, which today is fully disrupted. Assuming that Pyxis is bound and not on a first approach, we derive a 68% lower limit on the mass of the Milky Way of 0.95*10^12 M_sun.

In this article, we compare a set of Wave Front Sensors (WFS) based on Fourier filtering technique. In particular, this study explores the "class of pyramidal WFS" defined as the 4 faces pyramid WFS, all its recent variations (6, 8 faces, the flattened PWFS, etc.) and also some new WFSs as the flattened cone WFS or the 3 faces pyramid WFS. In the first part, we describe such a sensors class thanks to the optical parameters of the Fourier filtering mask and the modulation parameters. In the second part, we use the unified formalism to create a set of performance criteria: size of the signal on the detector, efficiency of incoming flux, sensitivity, linear range and chromaticity. In the third part, we show the influence of the previous optical and modulation parameters on these performance criteria. This exhaustive study allows to know how to optimize the sensor regarding to performance specifications. We show in particular that the number of faces has influence on the number of pixels required to do the wave front sensing but no influence on the sensitivity and linearity range. To modify these criteria, we show that the modulation radius and the apex angle are much more relevant. Moreover we observe that the time spent on edges or faces during a modulation cycle allows to adjust the trade-off between sensitivity and linearity range.

We introduce in this article a general formalism for Fourier based wave front sensing. To do so, we consider the filtering mask as a free parameter. Such an approach allows to unify sensors like the Pyramid Wave Front Sensor (PWFS) and the Zernike Wave Front Sensor (ZWFS). In particular, we take the opportunity to generalize this two sensors in terms of sensors' class where optical quantities as, for instance, the apex angle for the PWFS or the depth of the Zernike mask for the ZWFS become free parameters. In order to compare all the generated sensors of this two classes thanks to common performance criteria, we firstly define a general phase-linear quantity that we call meta-intensity. Analytical developments allow then to split the perfectly phase-linear behavior of a WFS from the non-linear contributions making robust and analytic definitions of the sensitivity and the linearity range possible. Moreover, we define a new quantity called the SD factor which characterizes the trade-off between these two antagonist quantities. These developments are generalized for modulation device and polychromatic light. A non-exhaustive study is finally led on the two classes allowing to retrieve the usual results and also make explicit the influence of the optical parameters introduced above.

In preparation of future Multi-Object Spectrographs (MOS) whose one of the major role is to provide an extensive statistical studies of high redshifted galaxies surveyed, the demonstrator Canary has been designed to tackle technical challenges related to open-loop Adaptive-Optics (AO) control with jointed Natural Guide Star (NGS) and Laser Guide Star (LGS) tomography. We have developed a Point Spread Function (PSF)-Reconstruction algorithm dedicated to MOAO systems using system telemetry to estimate the PSF potentially anywhere in the observed field, a prerequisite to post- process AO-corrected observations in Integral Field Spectroscopy (IFS). In this paper we show how to handle off-axis data to estimate the PSF using atmospheric tomography and compare it to a classical approach that uses on-axis residual phase from a truth sensor observing a natural bright source. We have reconstructed over 450 on-sky Canary PSFs and we get bias/1-${\sigma}$ standard-deviation (std) of 1.3/4.8 on the H-band Strehl ratio (SR) with 92.3% of correlation between reconstructed and sky SR. On the Full Width at Half Maximum (FWHM), we get respectively 2.94 mas, 19.9 mas and 88.3% for the bias, std and correlation. The reference method achieves 0.4/3.5/95% on the SR and 2.71 mas/14.9 mas/92.5% on the FWHM for the bias/std/correlation.

Canary is the Multi-Object Adaptive Optics (MOAO) pathfinder for the future MOAO-assisted Integral-Field Units (IFU) proposed for Extremely Large Telescopes (ELT). The MOAO concept relies on tomographically reconstructing the turbulence using multiple measurements along different lines of sight. Tomography requires the knowledge of the statistical turbulence parameters, commonly recovered from the system telemetry using a dedicated profiling technique. For demonstration purposes with the MOAO pathfinder Canary , this identification is performed thanks to the Learn & Apply (L&A) algorithm, that consists in model- fitting the covariance matrix of WFS measurements dependent on relevant parameters: $C_n^2(h)$ profile, outer scale profile and system mis-registration. We explore an upgrade of this algorithm, the Learn 3 Steps (L3S) approach, that allows one to dissociate the identification of the altitude layers from the ground in order to mitigate the lack of convergence of the required empirical covariance matrices therefore reducing the required length of data time-series for reaching a given accuracy. For nominal observation conditions, the L3S can reach the same level of tomographic error in using five times less data frames than the L&A approach. The L3S technique has been applied over a large amount of Canary data to characterize the turbu- lence above the William Herschel Telescope (WHT). These data have been acquired the 13th, 15th, 16th, 17th and 18th September 2013 and we find 0.67"/8.9m/3.07m/s of total seeing/outer scale/wind-speed, with 0.552"/9.2m/2.89m/s below 1.5 km and 0.263"/10.3m/5.22m/s between 1.5 and 20 km. We have also de- termined the high altitude layers above 20 km, missed by the tomographic reconstruction on Canary , have a median seeing of 0.187" and have occurred 16% of observation time.

Wide Field Adaptive Optics (WFAO) systems represent the more sophisticated AO systems available today at large telescopes. A critical aspect for these WFAO systems in order to deliver an optimised performance is the knowledge of the vertical spatiotemporal distribution of the CN2 and the wind speed. Previous studies (Cortes et al., 2012) already proved the ability of GeMS (the Gemini Multi-Conjugated AO system) in retrieving CN2 and wind vertical stratification using the telemetry data. To assess the reliability of the GeMS wind speed estimates a preliminary study (Neichel et al., 2014) compared wind speed retrieved from GeMS with that obtained with the atmospherical model Meso-Nh on a small sample of nights providing promising results. The latter technique is very reliable for the wind speed vertical stratification. The model outputs gave, indeed, an excellent agreement with a large sample of radiosoundings (~ 50) both in statistical terms and on individual flights (Masciadri et al., 2013). Such a tool can therefore be used as a valuable reference in this exercise of cross calibrating GeMS on-sky wind estimates with model predictions. In this contribution we achieved a two-fold results: (1) we extended analysis on a much richer statistical sample (~ 43 nights), we confirmed the preliminary results and we found an even better correlation between GeMS observations and the atmospherical model with basically no cases of not-negligible uncertainties; (2) we evaluate the possibility to use, as an input for GeMS, the Meso-Nh estimates of the wind speed stratification in an operational configuration. Under this configuration these estimates can be provided many hours in advanced with respect to the observations and with a very high temporal frequency (order of 2 minutes or less).

The advent of Wide Field Adaptive Optics (WFAO) systems marks the beginning of a new era in high spatial resolution imaging. The newly commissioned Gemini South Multi-Conjugate Adaptive Optics System (GeMS) combined with the infrared camera Gemini South Adaptive Optics Imager (GSAOI), delivers quasi diffraction-limited images over a field of 2 arc-minutes across. However, despite this excellent performance, some variable residues still limit the quality of the analyses. In particular, distortions severely affect GSAOI and become a critical issue for high-precision astrometry and photometry. In this paper, we investigate an optimal way to correct for the distortion following an inverse problem approach. Formalism as well as applications on GeMS data are presented.

Sky-coverage in laser-assisted AO observations largely depends on the system's capability to guide on the faintest natural guide-stars possible. Here we give an up-to-date status of our natural guide-star processing tailored to the European-ELT's visible and near-infrared (0.47 to 2.45 {\mu}m) integral field spectrograph - Harmoni. We tour the processing of both the isoplanatic and anisoplanatic tilt modes using the spatio-angular approach whereby the wave-front is estimated directly in the pupil plane avoiding a cumbersome explicit layered estimation on the 35-layer profiles we're currently using. Taking the case of Harmoni, we cover the choice of wave-front sensors, the number and field location of guide-stars, the optimised algorithms to beat down angular anisoplanatism and the performance obtained with different temporal controllers under split high-order/low-order tomography or joint tomography. We consider both atmospheric and far greater telescope wind buffeting disturbances. In addition we provide the sky-coverage estimates thus obtained.

Aims. The formation and properties of star clusters at the edge of H II regions are poorly known, partly due to limitations in angular resolution and sensitivity, which become particularly critical when dealing with extragalactic clusters. In this paper we study the stellar content and star-formation processes in the young N159W region in the Large Magellanic Cloud. Methods. We investigate the star-forming sites in N159W at unprecedented spatial resolution using JHKs-band images obtained with the GeMS/GSAOI instrument on the Gemini South telescope. The typical angular resolution of the images is of 100 mas, with a limiting magnitude in H of 22 mag (90 percent completeness). Photometry from our images is used to identify candidate young stellar objects (YSOs) in N159W. We also determine the H-band luminosity function of the star cluster at the centre of the H II region and use this to estimate its initial mass function (IMF). Results. We estimate an age of 2 + or - 1 Myr for the central cluster, with its IMF described by a power-law with an index of gamma = - 1.05 + or - 0.2 , and with a total estimated mass of 1300 solar mass. We also identify 104 candidate YSOs, which are concentrated in clumps and subclusters of stars, principally at the edges of the H II region. These clusters display signs of recent and active star-formation such as ultra-compact H II regions, and molecular outflows. This suggests that the YSOs are typically younger than the central cluster, pointing to sequential star-formation in N159W, which has probably been influenced by interactions with the expanding H II bubble.

During the commissioning of the Gemini MCAO System (GeMS), we had the opportunity to obtain data with the Gemini Multi-Object Spectrograph (GMOS), the most utilised instrument at Gemini South Observatory, in March and May 2012. Several globular clusters were observed in imaging mode that allowed us to study the performance of this new and untested combination. GMOS is a visible instrument, hence pushing MCAO toward the visible.We report here on the results with the GMOS instruments, derive photometric performance in term of Full Width Half Maximum (FWHM) and throughput. In most of the cases, we obtained an improvement factor of at least 2 against the natural seeing. This result also depends on the Natural Guide Star constellation selected for the observations and we then study the impact of the guide star selection on the FWHM performance.We also derive a first astrometric analysis showing that the GeMS+GMOS system provide an absolute astrometric precision better than 8mas and a relative astrometric precision lower than 50 mas.

We present in this study a first analysis of the astrometric error budget of absolute astrometry relative to background galaxies using adaptive optics. We use for this analysis multi-conjugated adaptive optics (MCAO) images obtained with GeMS/GSAOI at Gemini South. We find that it is possible to obtain 0.3 mas reference precision in a random field with 1 hour on source using faint background galaxies. Systematic errors are correctable below that level, such that the overall error is approximately 0.4 mas. Because the reference sources are extended, we find it necessary to correct for the dependency of the PSF centroid on the used aperture size, which would otherwise cause an important bias. This effect needs also to be considered for Extremely Large Telescopes (ELTs). When this effect is corrected, ELTs have the potential to measure proper motions of dwarfs galaxies around M31 with 10 km/s accuracy over a baseline of 5 years.

Physical properties were derived for the candidate open cluster La Serena 94, recently unveiled by the VVV collaboration. Thanks to the exquisite angular resolution provided by GeMS/GSAOI, we could characterize this system in detail, for the first time, with deep photometry in JHK$_{s}$ - bands. Decontaminated JHK$_{s}$ diagrams reach about 5 mag below the cluster turnoff in H. The locus of red clump giants in the colour - colour diagram, together with an extinction law, was used to obtain an average extinction of $A_V =14.18 \pm 0.71$. The same stars were considered as standard - candles to derive the cluster distance, $8.5 \pm 1.0$ kpc. Isochrones were matched to the cluster colour - magnitude diagrams to determine its age, $\log{t(yr)}=9.12\pm 0.06$, and metallicity, $Z=0.02\pm0.01$. A core radius of $r_{c}=0.51\pm 0.04$ pc was found by fitting King models to the radial density profile. By adding up the visible stellar mass to an extrapolated mass function, the cluster mass was estimated as $M=(2.65\pm0.57) \times 10^3$ M$_{\odot}$, consistent with an integrated magnitude of $M_{K}=-5.82\pm0.16$ and a tidal radius of $r_{t}=17.2\pm2.1$ pc. The overall characteristics of La Serena 94 confirm that it is an old open cluster located in the Crux spiral arm towards the fourth Galactic quadrant and distant $7.30\pm 0.49$ kpc from the Galactic centre. The cluster distorted structure, mass segregation and age indicate that it is a dynamically evolved stellar system.

We propose a new type of Wave Front Sensor (WFS) derived from the Pyramid WFS (PWFS). This new WFS, called the Flattened Pyramid-WFS (FPWFS), has a reduced Pyramid angle in order to optically overlap the four pupil images into an unique intensity. This map is then used to derive the phase information. In this letter this new WFS is compared to three existing WFSs, namely the PWFS, the Modulated PWFS (MPWFS) and the Zernike WFS (ZWFS) following tests about sensitivity, linearity range and low photon flux behavior. The FPWFS turns out to be more linear than a modulated pyramid for the high-spatial order aberrations but it provides an improved sensitivity compared to the non-modulated pyramid. The noise propagation may even be as low as the ZWFS for some given radial orders. Furthermore, the pixel arrangement being more efficient than for the PWFS, the FPWFS seems particularly well suited for high-contrast applications.

We investigate the star formation activity in a young star forming cluster embedded at the edge of the RCW 41 HII region. As a complementary goal, we aim at demonstrating the gain provided by Wide-Field Adaptive Optics instruments to study young clusters. We used deep, JHKs images from the newly commissioned Gemini-GeMS/GSAOI instrument, complemented with Spitzer IRAC observations, in order to study the photometric properties of the young stellar cluster. GeMS is an AO instrument, delivering almost diffraction limited images over a field of 2' across. The exquisite angular resolution allows us to reach a limiting magnitude of J = 22 for 98% completeness. The combination of the IRAC photometry with our JHKs catalog is used to build color-color diagrams, and select Young Stellar Objects (YSOs) candidates. We detect the presence of 80 Young Stellar Object (YSO) candidates. Those YSOs are used to infer the cluster age, which is found to be in the range 1 to 5 Myr. We find that 1/3 of the YSOs are in a range between 3 to 5 Myr, while 2/3 of the YSO are < 3 Myr. When looking at the spatial distribution of these two populations, we evidence a potential age gradient across the field, suggesting sequential star formation. We construct the IMF, and show that we can sample the mass distribution well into the brown dwarf regime (down to 0.01 Msun). The logarithmic mass function rises to peak at 0.3 Msun, before turning over and declining into the brown dwarf regime. The total cluster mass derived is estimated to be 78 +/- 18 Msun, while the ratio of brown dwarfs to star derived is 18 p/- 5 %. When comparing with other young clusters, we find that the IMF shape of the young cluster embedded within RCW 41 is consistent with those of Trapezium, IC 348 or Chamaeleon I, except for the IMF peak, which happens to be at higher mass. This characteristic is also seen in clusters like NGC 6611 or even Taurus.

Infrared Dark Clouds are ideal laboratories to study the initial processes of high-mass star and star cluster formation. We investigated star formation activity of an unexplored filamentary dark cloud (~5.7pc x 1.9pc), which itself is part of a large filament (~20pc) located in the S254-S258 OB complex at a distance of 2.5kpc. Using MIPS Spitzer 24 micron data, we uncover 49 sources with SNR greater than 5. We identified 45 sources as candidate YSOs of Class I, Flat-spectrum & Class II nature. Additional 17 candidate YSOs (9 Class I & 8 Class II) are also identified using JHK and WISE photometry. We find that the protostar to Class II sources ratio (~2) and the protostar fraction (~70%) of the region are high. When the protostar fraction compared to other young clusters, it suggests that the star formation in the dark cloud was possibly started only 1 Myr ago. Combining the NIR photometry of the YSO candidates with the theoretical evolutionary models, we infer that most of the candidate YSOs formed in the dark cloud are low-mass (<2 Msolar) in nature. We examine the spatial distribution of the YSOs and find that majority of them are linearly aligned along the highest column density line (N(H2) ~1 x 10^22 cm^-2) of the dark cloud along its long axis at mean nearest neighbor separation of ~0.2pc. Using observed properties of the YSOs, physical conditions of the cloud and a simple cylindrical model, we explore the possible star formation process of this filamentary dark cloud and suggest that gravitational fragmentation within the filament should have played a dominant role in the formation of the YSOs. From the total mass of the YSOs, gaseous mass associated with the dark cloud, and surrounding environment, we infer that the region is presently forming stars at an efficiency ~3% and a rate ~30 Msolar Myr^-1, and may emerge to a richer cluster.

We have observed two of the six Frontier Fields galaxy clusters, MACS J0416.1-2403 and Abell 2744, using the Gemini Multi-Conjugate Adaptive Optics System (GeMS) and the Gemini South Adaptive Optics Imager (GSAOI). With 0.08"-0.10" FWHM our data are nearly diffraction-limited over a 100"x100" wide area. GeMS/GSAOI complements the Hubble Space Telescope (HST) redwards of 1.6microns with twice the angular resolution. We reach a 5 sigma depth of Ks = 25.6 mag (AB) for compact sources. In this paper we describe the observations, the data processing and the initial public data release. We provide fully calibrated, co-added images matching the native GSAOI pixel scale as well as the larger plate scales of the HST release, adding to the legacy value of the Frontier Fields. Our work demonstrates that even for fields at high galactic latitude, where natural guide stars are rare, current multi-conjugated adaptive optics technology at 8m-telescopes has opened a new window on the distant Universe. Observations of a third Frontier Field, Abell 370, are planned.

The Adaptive Optics Facility (AOF) project envisages transforming one of the VLT units into an adaptive telescope and providing its ESO (European Southern Observatory) second generation instruments with turbulence corrected wavefronts. For MUSE and HAWK-I this correction will be achieved through the GALACSI and GRAAL AO modules working in conjunction with a 1170 actuators Deformable Secondary Mirror (DSM) and the new Laser Guide Star Facility (4LGSF). Multiple wavefront sensors will enable GLAO and LTAO capabilities, whose performance can greatly benefit from a knowledge about the stratification of the turbulence in the atmosphere. This work, totally based on end-to-end simulations, describes the validation tests conducted on a Cn2 profiler adapted for the AOF specifications. Because an absolute profile calibration is strongly dependent on a reliable knowledge of turbulence parameters r0 and L0, the tests presented here refer only to normalized output profiles. Uncertainties in the input parameters inherent to the code are tested as well as the profiler response to different turbulence distributions. It adopts a correction for the unseen turbulence, critical for the GRAAL mode, and highlights the effects of masking out parts of the corrected wavefront on the results. Simulations of data with typical turbulence profiles from Paranal were input to the profiler, showing that it is possible to identify reliably the input features for all the AOF modes.

We use a joint optical/X-ray analysis to constrain the geometry and history of the ongoing merging event in the massive galaxy cluster MACSJ0416.1-2403 (z=0.397). Our investigation of cluster substructure rests primarily on a combined strong- and weak-lensing mass reconstruction based on the deep, high-resolution images obtained for the Hubble Frontier Fields initiative. To reveal the system's dynamics, we complement this lensing analysis with a study of the intra-cluster gas using shallow Chandra data, and a three-dimensional model of the distribution and motions of cluster galaxies derived from over 100 spectroscopic redshifts. The multi-scale grid model obtained from our combined lensing analysis extends the high-precision strong-lensing mass reconstruction recently performed to cluster-centric distances of almost 1 Mpc. Our analysis detects the two well known mass concentrations in the cluster core. A pronounced offset between collisional and collisionless matter is only observed for the SW cluster component, while excellent alignment is found for the NE cluster. Both the lensing analysis and the distribution of cluster light strongly suggest the presence of a third massive structure, almost 2 arcmin SW of the cluster centre. Since no X-ray emission is detected in this region, we conclude that this structure is non-virialised and speculate that it might be part of a large-scale filament almost aligned with our line of sight. Combining all evidence from the distribution of dark and luminous matter, we propose two alternative scenarios for the trajectories of the components of MACSJ0416.1-2403. Upcoming deep X-ray observations that allow the detection of shock fronts, cold cores, and sloshing gas (all key diagnostics for studies of cluster collisions) will allow us to test, and distinguish between these two scenarios.

The Gemini Multi-conjugate adaptive optics System (GeMS) is a facility instrument for the Gemini-South telescope. It delivers uniform, near-diffraction-limited image quality at near-infrared wavelengths over a 2 arcminute field of view. Together with the Gemini South Adaptive Optics Imager (GSAOI), a near-infrared wide field camera, GeMS/GSAOI's combination of high spatial resolution and a large field of view will make it a premier facility for precision astrometry. Potential astrometric science cases cover a broad range of topics including exo-planets, star formation, stellar evolution, star clusters, nearby galaxies, black holes and neutron stars, and the Galactic center. In this paper, we assess the astrometric performance and limitations of GeMS/GSAOI. In particular, we analyze deep, mono-epoch images, multi-epoch data and distortion calibration. We find that for single-epoch, un-dithered data, an astrometric error below 0.2 mas can be achieved for exposure times exceeding one minute, provided enough stars are available to remove high-order distortions. We show however that such performance is not reproducible for multi-epoch observations, and an additional systematic error of ~0.4 mas is evidenced. This systematic multi-epoch error is the dominant error term in the GeMS/GSAOI astrometric error budget, and it is thought to be due to time-variable distortion induced by gravity flexure.

The advent of a new generation of Adaptive Optics systems called Wide Field AO (WFAO) mark the beginning of a new era. By using multiple Guide Stars (GSs), either Laser Guide Stars (LGSs) or Natural Guide Stars (NGSs), WFAO significantly increases the field of view of the AO-corrected images, and the fraction of the sky that can benefit from such correction. Different typologies of WFAO have been studied over the past years. They all require multiple GSs to perform a tomographic analysis of the atmospheric turbulence. One of the fundamental aspects of the new WFAO systems is the knowledge of the spatio-temporal distribution of the turbulence above the telescope. One way to get to this information is to use the telemetry data provided by the WFAO system itself. Indeed, it has been demonstrated that WFAO systems allows one to derive the Cn2 and wind profile in the main turbulence layers (see e.g. Cortes et al. 2012). This method has the evident advantage to provide information on the turbulence stratification that effectively affects the AO system, property more difficultly respected by independently vertical profilers. In this paper, we compare the wind speeds profiles of GeMS with those predicted by a non-hydrostatical mesoscale atmospherical model (Meso-NH). It has been proved (Masciadri et al., 2013), indeed, that this model is able to provide reliable wind speed profiles on the whole troposphere and stratosphere (up to 20-25 km) above top-level astronomical sites. Correlation with measurements revealed to be very satisfactory when the model performances are analyzed from a statistical point of view as well on individual nights. Such a system appears therefore as an interesting reference to be used to quantify the GeMS wind speed profiles reliability.

The availability and performance of laser-based adaptive optics (AO) systems are strongly dependent on the power and quality of the laser beam before being projected to the sky. Frequent and time-consuming alignment procedures are usually required in the laser systems with free-space optics to optimize the beam. Despite these procedures, significant distortions of the laser beam have been observed during the first two years of operation of the Gemini South multi-conjugate adaptive optics system (GeMS). A beam shaping concept with two deformable mirrors is investigated in order to provide automated optimization of the laser quality for astronomical AO. This study aims at demonstrating the correction of quasi-static aberrations of the laser, in both amplitude and phase, testing a prototype of this two-deformable mirror concept on GeMS. The paper presents the results of the preparatory study before the experimental phase. An algorithm to control amplitude and phase correction, based on phase retrieval techniques, is presented with a novel unwrapping method. Its performance is assessed via numerical simulations, using aberrations measured at GeMS as reference. The results predict effective amplitude and phase correction of the laser distortions with about 120 actuators per mirror and a separation of 1.4 m between the mirrors. The spot size is estimated to be reduced by up to 15% thanks to the correction. In terms of AO noise level, this has the same benefit as increasing the photon flux by 40%.

The Gemini Multi-conjugate Adaptive Optics System - GeMS, a facility instrument mounted on the Gemini South telescope, delivers a uniform, near diffraction limited images at near infrared wavelengths (0.95 microns- 2.5 microns) over a field of view of 120 arc seconds. GeMS is the first sodium layer based multi laser guide star adaptive optics system used in astronomy. It uses five laser guide stars distributed on a 60 arc seconds square constellation to measure for atmospheric distortions and two deformable mirrors to compensate for it. In this paper, the second devoted to describe the GeMS project, we present the commissioning, overall performance and operational scheme of GeMS. Performance of each sub-system is derived from the commissioning results. The typical image quality, expressed in full with half maximum, Strehl ratios and variations over the field delivered by the system are then described. A discussion of the main contributor to performance limitation is carried-out. Finally, overheads and future system upgrades are described.

We use spatio-temporal cross-correlations of slopes from five Shack-Hartmann wavefront sensors to analyse the temporal evolution of the atmospheric turbulence layers at different altitudes. The focus is on the verification of the frozen flow assumption. The data is coming from the Gemini South Multi-Conjugate Adaptive Optics System (GeMS). First, the Cn2 and wind profiling technique is presented. This method provides useful information for the AO system operation such as the number of existing turbulence layers, their associated velocities, altitudes and strengths and also a mechanism to estimate the dome seeing contribution to the total turbulence. Next, by identifying the turbulence layers we show that it is possible to estimate the rate of decay in time of the correlation among turbulence measurements. We reduce on-sky data obtained during 2011, 2012 and 2013 campaigns and the first results suggest that the rate of temporal de-correlation can be expressed in terms of a single parameter that is independent of the layer altitude and turbulence strength. Finally, we show that the decay rate of the frozen-flow contribution increases linearly with the layer speed. The observed evolution of the decay rate confirms the potential interest of the predictive control for wide-field AO systems.

After 101 nights of commissioning, the Gemini MCAO system (GeMS) started science operations in December 2012. After a brief reminder on GeMS specificities, we describe the overall GeMS performance, and we focus then on the first science results obtained with GeMS, illustrating the unique capabilities of this new Gemini instrument.

The Gemini Multi-conjugate adaptive optics System (GeMS) at the Gemini South telescope in Cerro Pach{\'o}n is the first sodium-based multi-Laser Guide Star (LGS) adaptive optics system. It uses five LGSs and two deformable mirrors to measure and compensate for atmospheric distortions. The GeMS project started in 1999, and saw first light in 2011. It is now in regular operation, producing images close to the diffraction limit in the near infrared, with uniform quality over a field of view of two square arcminutes. The present paper (I) is the first one in a two-paper review of GeMS. It describes the system, explains why and how it was built, discusses the design choices and trade-offs, and presents the main issues encountered during the course of the project. Finally, we briefly present the results of the system first light.

The photometric properties of main sequence (MS) and pre-main sequence (PMS) stars in the young cluster Haffner 16 are examined using images recorded with the Gemini South Adaptive Optics Imager (GSAOI) and corrected for atmospheric blurring by the Gemini Multi-Conjugate Adapative Optics System (GeMS). A rich population of PMS stars is identified, and comparisons with isochrones suggest an age < 10 Myr assuming a distance modulus of 13.5 (D = 5 kpc). When compared with the solar neighborhood, Haffner 16 is roughly a factor of two deficient in objects with sub-solar masses. PMS objects in the cluster are also more uniformly distributed on the sky than bright MS stars. It is suggested that Haffner 16 is dynamically evolved, and that it is shedding protostars with sub-solar masses. Young low mass clusters like Haffner 16 are one possible source of PMS stars in the field. The cluster will probably evolve on time scales of ~ 100 - 1000 Myr into a diffuse moving group with a mass function that is very different from that which prevailed early in its life.

Detailed knowledge of the mesopheric sodium layer characteristics is crucial to estimate and optimize the performance of Laser Guide Star (LGS) assisted Adaptive Optics (AO) systems. In this paper, we present an analysis of two sets of data on the mesospheric sodium layer. The first set comes from a laser experiment that was carried out at Cerro Tololo to monitor the abundance and altitude of the mesospheric sodium in 2001, during six runs covering a period of one year. This data is used to derive the mesospheric sodium column density, the sodium layer thickness and the temporal behavior of the sodium layer mean altitude. The second set of data was gathered during the first year of the Gemini MCAO System (GeMS) commissioning and operations. GeMS uses five LGS to measure and compensate for atmospheric distortions. Analysis of the LGS wavefront sensor data provides information about the sodium photon return and the spot elongation seen by the WFS. All these parameters show large variations on a yearly, nightly and hourly basis, affecting the LGS brightness, shape and mean altitude. The sodium photon return varies by a factor of three to four over a year, and can change by a factor of two over a night. In addition, the comparison of the photon returns obtained in 2001 with those measured a decade later using GeMS shows a significant difference in laser format efficiencies. We find that the temporal power spectrum of the sodium mean altitude follows a linear trend, in good agreement with the results reported by Pfrommer & Hickson (2010).

NACO is the famous and versatile diffraction limited NIR imager and spectrograph with which ESO celebrated 10 years of Adaptive Optics at the VLT. Since two years a substantial effort has been put in to understanding and fixing issues that directly affect the image quality and the high contrast performances of the instrument. Experiments to compensate the non-common-path aberrations and recover the highest possible Strehl ratios have been carried out successfully and a plan is hereafter described to perform such measurements regularly. The drift associated to pupil tracking since 2007 was fixed in October 2011. NACO is therefore even better suited for high contrast imaging and can be used with coronagraphic masks in the image plane. Some contrast measurements are shown and discussed. The work accomplished on NACO will serve as reference for the next generation instruments on the VLT, especially those working at the diffraction limit and making use of angular differential imaging (i.e. SPHERE, VISIR, possibly ERIS).

This paper describes the data preprocessing and reduction methods together with SLODAR analysis and wind profiling techniques for GeMS: the Gemini MCAO System. The wavefront gradient measurements of the five GeMS's Shack-Hartmann sensors, each one pointing to a laser guide star, are combined with the DM commands sent to three deformable mirrors optically conjugated at 0, 4.5 and 9 km in order to reconstruct pseudo-open loop slopes. These pseudo-open loop slopes are then used to reconstruct atmospheric turbulence profiles, based on the SLODAR and wind-profiling methods. We introduce the SLODAR method, and how it has been adapted to work in a close-loop, multi Laser Guide Star system. We show that our method allows characterizing the turbulence of up to 16 layers for altitudes spanning from 0 to 19 km. The data preprocessing and reduction methods are described, and results obtained from observations made in 2011 are presented. The wind profiling analysis is shown to be a powerful technique not only for characterizing the turbulence intensity, wind direction and speed, but also as it can provide a verification tool for SLODAR results. Finally, problems such as fratricide effect in multiple laser system due to Rayleigh scattering, centroid gain variations, and limitations of the method are also addressed.

One of the main science goal of the future European Extremely Large Telescope will be to understand the mass assembly process in galaxies as a function of cosmic time. To this aim, a multi-object, AO-assisted integral field spectrograph will be required to map the physical and chemical properties of very distant galaxies. In this paper, we examine the ability of such an instrument to obtain spatially resolved spectroscopy of a large sample of massive (0.1<Mstellar<5e11Mo) galaxies at 2<z<6, selected from future large area optical-near IR surveys. We produced a set of about one thousand numerical simulations of 3D observations using reasonable assumptions about the site, telescope, and instrument, and about the physics of distant galaxies. These data-cubes were analysed as real data to produce realistic kinematic measurements of very distant galaxies. We then studied how sensible the scientific goals are to the observational (i.e., site-, telescope-, and instrument-related) and physical (i.e., galaxy-related) parameters. We specifically investigated the impact of AO performance on the science goal. We did not identify any breaking points with respect to the parameters (e.g., the telescope diameter), with the exception of the telescope thermal background, which strongly limits the performance in the highest (z>5) redshift bin. We find that a survey of Ngal galaxies that fulfil the range of science goals can be achieved with a ~90 nights program on the E-ELT, provided a multiplex capability M Ngal/8.

One of the prominent science goal of the ELTs will be to study the physics and mass assembly of galaxies at very high redshifts. Here, we present the galaxy evolution science case for EAGLE, which is a NIR multi-integral field spectrograph for the E-ELT currently under phase A study. We summarize results of simulations conducted to derive high-level requirements. In particular, we show how we have derived the specifications for the ensquared energy that the AO system needs to provide to reach the scientific goals of the instrument. Finally, we present future strategies to conduct galaxy surveys with EAGLE.

[Abridged] We present and analyze observations of J033241.88-274853.9 at z=0.6679, using multi-wavelength photometry and imaging with FLAMES/GIRAFFE 3D spectroscopy. J033241.88-274853.9 is found to be a blue, young (~320Myr) stellar disk embedded in a very gas-rich (fgas=73-82% with log(Mstellar/Mo)=9.45) and turbulent phase that is found to be rotating on large spatial scales. We identified two unusual properties of J033241.88-274853.9. (1) The spatial distributions of the ionized gaseous and young stars show a strong decoupling; while almost no stars can be detected in the southern part down to the very deep detection limit of ACS/UDF images, significant emission from the [OII] ionized gas is detected. (2) We detect an excess of velocity dispersion in the southern part of J033241.88-274853.9 in comparison to expectations from a rotating disk model. We considered two disk formation scenarios, depending on the gaseous phase geometry. In the first one, we examined whether J033241.88-274853.9 could be a young rotating disk that has been recently collapsed from a pre-existing, very gas-rich rotating disk. This scenario requires two (unknown) additional assumptions to explain the decoupling between the distribution of stars and gas and the excess of velocity dispersion in the same region. In a second scenario, we examine whether J033241.88-274853.9 could be a merger remnant of two gas-rich disks. In this case, the asymmetry observed between the gas and star distributions, as well as the excess of velocity dispersion, find a common explanation. Shocks produced during the merger in this region can be ionized easily and heat the gas while preventing star formation. This makes this scenario more satisfactory than the collapse of a pre-existing, gas-rich rotating disk.

Several Wide Field of view Adaptive Optics (WFAO) concepts like Multi-Conjugate AO (MCAO), Multi-Object AO (MOAO) or Ground-Layer AO (GLAO) are currently studied for the next generation of Extremely Large Telescopes (ELTs). All these concepts will use atmospheric tomography to reconstruct the turbulent phase volume. In this paper, we explore different reconstruction algorithms and their fundamental limitations. We conduct this analysis in the Fourier domain. This approach allows us to derive simple analytical formulations for the different configurations, and brings a comprehensive view of WFAO limitations. We then investigate model and statistical errors and their impact on the phase reconstruction. Finally, we show some examples of different WFAO systems and their expected performance on a 42m telescope case.

Intermediate mass galaxies (logM(Msun)>10) at z~0.6 are the likeliest progenitors of the present-day numerous population of spirals. There is growing evidence that they have evolved rapidly since the last 6 to 8 Gyr ago, and likely have formed a significant fraction of their stellar mass, often showing perturbed morphologies and kinematics. We have gathered a representative sample of 88 such galaxies and have provided robust estimates of their gas phase metallicity. For doing so, we have used moderate spectral resolution spectroscopy at VLT/FORS2 with unprecedented high S/N allowing to remove biases coming from interstellar absorption lines and extinction to establish robust values of R23=([OII]3727 + [OIII]4959,5007)/Hbeta. We definitively confirm that the predominant population of z~0.6 starbursts and luminous IR galaxies (LIRGs) are on average, two times less metal rich than the local galaxies at a given stellar mass. We do find that the metal abundance of the gaseous phase of galaxies is evolving linearly with time, from z=1 to z=0 and after comparing with other studies, from z=3 to z=0. Combining our results with the reported evolution of the Tully Fisher relation, we do find that such an evolution requires that ~30% of the stellar mass of local galaxies have been formed through an external supply of gas, thus excluding the close box model. Distant starbursts & LIRGs have properties (metal abundance, star formation efficiency & morphologies) similar to those of local LIRGs. Their underlying physics is likely dominated by gas infall probably through merging or interactions. Our study further supports the rapid evolution of z~0.4-1 galaxies. Gas exchanges between galaxies is likely the main cause of this evolution.

[Abridged] We have developed an end-to-end simulation to specify the science requirements of a MOAO-fed integral field spectrograph on either an 8m or 42m telescope. Our simulations re-scales observations of local galaxies or results from numerical simulations of disk or interacting galaxies. For the current analysis, we limit ourselves to a local disk galaxy which exhibits simple rotation and a simulation of a merger. We have attempted to generalize our results by introducing the simple concepts of "PSF contrast" which is the amount of light polluting adjacent spectra which we find drives the smallest EE at a given spatial scale. The choice of the spatial sampling is driven by the "scale-coupling", i.e., the relationship between the IFU pixel scale and the size of the features that need to be recovered by 3D spectroscopy in order to understand the nature of the galaxy and its substructure. Because the dynamical nature of galaxies are mostly reflected in their large-scale motions, a relatively coarse spatial resolution is enough to distinguish between a rotating disk and a major merger. Although we used a limited number of morpho-kinematic cases, our simulations suggest that, on a 42m telescope, the choice of an IFU pixel scale of 50-75 mas seems to be sufficient. Such a coarse sampling has the benefit of lowering the exposure time to reach a specific signal-to-noise as well as relaxing the performance of the MOAO system. On the other hand, recovering the full 2D-kinematics of z~4 galaxies requires high signal-to-noise and at least an EE of 34% in 150 mas (2 pixels of 75 mas). Finally, we carried out a similar study at z=1.6 with a MOAO-fed spectrograph for an 8m, and find that at least an EE of 30% at 0.25 arcsec spatial sampling is required to understand the nature of disks and mergers.

Using the multi-integral field spectrograph GIRAFFE at VLT, we have derived the K-band Tully-Fisher relation (TFR) at z~0.6 for a representative sample of 65 galaxies with emission lines. We confirm that the scatter in the z~0.6 TFR is caused by galaxies with anomalous kinematics, and find a positive and strong correlation between the complexity of the kinematics and the scatter that they contribute to the TFR. Considering only relaxed-rotating disks, the scatter, and possibly also the slope of the TFR, do not appear to evolve with z. We detect an evolution of the K-band TFR zero point between z~0.6 and z=0, which, if interpreted as an evolution of the K-band luminosity of rotating disks, would imply that a brightening of 0.66+/-0.14 mag occurs between z~0.6 and z=0. Any disagreement with the results of Flores et al. (2006) are attributed to both an improvement of the local TFR and the more detailed accurate measurement of the rotation velocities in the distant sample. Most of the uncertainty can be explained by the relatively coarse spatial-resolution of the kinematical data. Because most rotating disks at z~0.6 are unlikely to experience further merging events, one may assume that their rotational velocity does not evolve dramatically. If true, our result implies that rotating disks observed at z~0.6 are rapidly transforming their gas into stars, to be able to double their stellar masses and be observed on the TFR at z=0. The rotating disks observed are indeed emission-line galaxies that are either starbursts or LIRGs, which implies that they are forming stars at a high rate. Thus, a significant fraction of the rotating disks are forming the bulk of their stars within 6 to 8 Gyr, in good agreement with former studies of the evolution of the M-Z relation.

We present a first combined analysis of the morphological and dynamical properties for the Intermediate MAss Galaxy Evolution Sequence (IMAGES) sample. It is a representative sample of 52 z~0.6 galaxies with Mstell from 1.5 to 15 10^10Msun and possessing 3D resolved kinematics and HST deep imaging in at least two broad band filters. We aim at evaluate robustly the evolution of rotating spirals since z~0.6, as well as to test the different schemes for classifying galaxies morphologically. We used all the information provided by multi-band images, color maps and 2 dimensional light fitting to assign to each object a morphological class. We divided our sample between spiral disks, peculiar objects, compact objects and mergers. Using our morphological classification scheme, 4/5 of identified spirals are rotating disks and more than 4/5 of identified peculiar galaxies show complex kinematics, while automatic classification methods such as Concentration-Asymmetry and GINI-M20 severely overestimate the fraction of relaxed disk galaxies. Using this methodology, we find that the fraction of rotating spirals has increased by a factor ~ 2 during the last 6 Gyrs, a much higher fraction that found previously based on morphologies alone. These rotating spiral disks are forming stars very rapidly, doubling their stellar masses over the last 6 Gyrs, while most of their stars have been formed few Gyrs earlier, which reveals the presence of a large gas supply. Because they are likely the progenitors of local spirals, we can conjecture how their properties are evolving. Their disks show some evidence for an inside-out growth and the gas supply/accretion is not made randomly as the disk need to be stable in order to match the local disk properties.

The Large Program IMAGES is near 2/3 of its completion. It provides us with kinematics (GIRAFFE deployable IFUs), gas chemistry (FORS2), detailed morphologies (HST/ACS) and IR photometry (Spitzer) for a set of 70 galaxies representative of intermediate mass galaxies (MJ<=-20.3 or 1.5e10 Mo) at z=0.4-0.75. We discover that, 6 Gyr ago, a significant fraction of galaxies (>40%) had anomalous kinematics, i.e. kinematics significantly discrepant from those of rotational or dispersion supported galaxies. The anomalous kinematics cause the observed large dispersion of the Tully-Fisher relation at large distances. IMAGES will soon allow us to study distant galaxies at a level of detail almost comparable to that of nearby galaxies.

(abbreviated) We present the first results of the ESO large program, ``IMAGES'' which aims at obtaining robust measurements of the kinematics of distant galaxies using the multi-IFU mode of GIRAFFE on the VLT. 3D spectroscopy is essential to robustly measure the often distorted kinematics of distant galaxies (e.g., Flores et al. 2006). We derive the velocity fields and $\sigma$-maps of 36 galaxies at 0.4<z<0.75 from the kinematics of the [OII] emission line doublet, and generate a robust technique to identify the nature of the velocity fields based on the pixels of the highest signal-to-noise ratios (S/N). We have gathered a unique sample of 63 velocity fields of emission line galaxies (W0([OII]) > 15 A) at z=0.4-0.75, which are a representative subsample of the population of M_stellar>1.5x10^{10} M_sun emission line galaxies in this redshift range, and are largely unaffected by cosmic variance. Taking into account all galaxies -with or without emission lines- in that redshift range, we find that at least 41+/-7% of them have anomalous kinematics, i.e., they are not dynamically relaxed. This includes 26+/-7% of distant galaxies with complex kinematics, i.e., they are not simply pressure or rotationally supported. Our result implies that galaxy kinematics are among the most rapidly evolving properties, because locally, only a few percent of the galaxies in this mass range have complex kinematics.

Numerical simulations predict that minor mergers are an important channel for the mass assembly of galaxies. However, minor mergers are relatively difficult to detect using imaging, especially at high redshift. While such events are much less violent than major mergers, they can nevertheless leave several features on the kinematical structures of remnant galaxies which could be detected using 3D spectroscopy. We present the first direct detection of a minor merger in a z~0.6 galaxy. Such events could indeed be good candidates to explain the kinematics of perturbed rotating disks observed with GIRAFFE at z~0.6. We present photometric and kinematical evidence of such an event in a combined analysis of three-band HST/ACS imaging and VLT/GIRAFFE 2D-kinematics. Using these data, we are able to demonstrate that a minor merger of a relatively small satellite (mass ratio ~1:18) is occurring in this galaxy. We also derive a total SFR ~21Mo/yr. Minor mergers could be one of the physical processes explaining the kinematics of perturbed rotating disks, which represent ~25% of emission line intermediate mass galaxies at z~0.6. 3D spectroscopy appears to be a very good tool to identify minor mergers in distant (and local) galaxies.

In the last few years, new Adaptive Optics [AO] techniques have emerged to answer new astronomical challenges: Ground-Layer AO [GLAO] and Multi-Conjugate AO [MCAO] to access a wider Field of View [FoV], Multi-Object AO [MOAO] for the simultaneous observation of several faint galaxies, eXtreme AO [XAO] for the detection of faint companions. In this paper, we focus our study to one of these applications : high red-shift galaxy observations using MOAO techniques in the framework of Extremely Large Telescopes [ELTs]. We present the high-level specifications of a dedicated instrument. We choose to describe the scientific requirements with the following criteria : 40% of Ensquared Energy [EE] in H band (1.65um) and in an aperture size from 25 to 150 mas. Considering these specifications we investigate different AO solutions thanks to Fourier based simulations. Sky Coverage [SC] is computed for Natural and Laser Guide Stars [NGS, LGS] systems. We show that specifications are met for NGS-based systems at the cost of an extremely low SC. For the LGS approach, the option of low order correction with a faint NGS is discussed. We demonstrate that, this last solution allows the scientific requirements to be met together with a quasi full SC.

In this paper, we present a first comparison of different Adaptive Optics (AO) concepts to reach a given scientific specification for 3D spectroscopy on Extremely Large Telescope (ELT). We consider that a range of 30%-50% of Ensquarred Energy (EE) in H band (1.65um) and in an aperture size from 25 to 100mas is representative of the scientific requirements. From these preliminary choices, different kinds of AO concepts are investigated : Ground Layer Adaptive Optics (GLAO), Multi-Object AO (MOAO) and Laser Guide Stars AO (LGS). Using Fourier based simulations we study the performance of these AO systems depending on the telescope diameter.