Normalized to: Nayral, C.
[1]
oai:arXiv.org:1706.09801 [pdf] - 1585309
Low-temperature MIR to submillimeter mass absorption coefficient of
interstellar dust analogues II: Mg and Fe-rich amorphous silicates
Submitted: 2017-06-27
To model the cold dust emission observed in the diffuse interstellar medium,
in dense molecular clouds or in cold clumps that could eventually form new
stars, it is mandatory to know the physical and spectroscopic properties of
this dust and to understand its emission. This work is a continuation of
previous studies aiming at providing astronomers with spectroscopic data of
realistic cosmic dust analogues for the interpretation of observations.
Ferromagnesium amorphous silicate dust analogues were produced with a mean
composition close to $\mathrm{Mg_{1-x}Fe_{x}SiO_3}$ with x = 0.1, 0.2, 0.3,
0.4. Part of each sample was annealed at 500$^{\circ}$C for two hours in a
reducing atmosphere to modify the oxidation state of iron. We have measured the
mass absorption coefficient (MAC) of these ferromagnesium amorphous silicate
dust analogues in the spectral domain 30 - 1000 $\mu$m for grain temperature in
the range 10 - 300 K and at room temperature in the 5 - 40 $\mu$m range. The
MAC of ferromagnesium samples behaves in the same way as the MAC of pure
Mg-rich amorphous silicate samples. In the 30 - 300 K range, the MAC increases
with increasing grain temperature whereas in the range 10 - 30 K, we do not see
any change of the MAC. The MAC cannot be described by a single power law in
${\lambda}^{-\beta}$. The MAC of all the samples is much higher than the MAC
calculated by dust models. The complex behavior of the MAC of amorphous
silicates with wavelength and temperature is observed whatever the exact
silicate composition (Mg vs. Fe amount). It is a universal characteristic of
amorphous materials, and therefore of amorphous cosmic silicates, that should
be taken into account in astronomical modeling. The enhanced MAC of the
measured samples compared to the MAC calculated for cosmic dust model implies
that dust masses are overestimated by the models.
[2]
oai:arXiv.org:1701.07225 [pdf] - 1561118
Low temperature MIR to submillimeter mass absorption coefficient of
interstellar dust analogues I: Mg-rich glassy silicates
Demyk, K.;
Meny, C.;
Lu, X. -H.;
Papatheodorou, G.;
Toplis, M. J.;
Leroux, H.;
Depecker, C.;
Brubach, J. -B.;
Roy, P.;
Nayral, C.;
Ojo, W. -S.;
Delpech, F.;
Paradis, D.;
Gromov, V.
Submitted: 2017-01-25
A wealth of data from the Herschel and Planck satellites and now from ALMA,
revealing cold dust thermal emission, is available for astronomical
environments ranging from interstellar clouds, cold clumps, circumstellar
envelops, and protoplanetary disks. The interpretation of these observations
relies on the understanding and modeling of cold dust emission and on the
knowledge of the dust optical properties. The aim of this work is to provide
astronomers with a set of spectroscopic data of realistic interstellar dust
analogues that can be used to interpret the observations. Glassy silicates of
mean composition (1-x)MgO - xSiO2 with x = 0.35, 0.40 and 0.50 were
synthesized. The mass absorption coefficient (MAC) of the samples was measured
in the spectral domain 30 - 1000 $\mu$m for grain temperature in the range 300
K - 10 K and at room temperature in the 5 - 40 $\mu$m domain. We find that the
MAC of all samples varies with the grains temperature. In the FIR/submm, and
above 30K, the MAC value at a given wavelength increases with the temperature
as thermally activated absorption processes appear. The studied materials
exhibit different and complex behaviors at long wavelengths (lambda $\geq$ 200
to 700 $\mu$m depending on the samples) and the MAC cannot be approximated by a
single power law in ${\lambda}^{-\beta}$. These behaviors are attributed to the
amorphous nature of dust and to the amount and nature of the defects within
this amorphous structure. Above 20 $\mu$m, the measured MAC are much higher
than the MAC calculated from interstellar silicate dust models indicating that
the analogues measured in this study are more emissive than the silicates in
cosmic dust models. This has important astrophysical implications because
masses are overestimated by the models. Moreover, constraints on elemental
abundance of heavy elements in cosmic dust models are relaxed
[3]
oai:arXiv.org:1109.2758 [pdf] - 1084040
Low temperature FIR and submm mass absorption coefficient of
interstellar silicate dust analogues
Coupeaud, A.;
Demyk, K.;
Meny, C.;
Nayral, C.;
Delpech, F.;
Leroux, H.;
Depecker, C.;
Creff, G.;
Brubach, J. B.;
Roy, P.
Submitted: 2011-09-13
Cold dust grains emission in the FIR/submm is usually expressed as a modified
black body law in which the dust mass absorption coefficient (MAC), is
described with a temperature- and wavelength-independent emissivity spectral
index, beta. However, numerous data from space and balloon-born missions and
recently from Herschel and Planck show that dust emission is not well
understood, as revealed by the observed anti-correlation of beta with the grain
temperature. In order to give astronomers the necessary data to interpret
FIR/submm observations, we synthesised analogues of interstellar amorphous and
crystalline silicate grains, rich in Mg and Ca, and having stiochiometry of
olivine and pyroxene and measured their MAC, in the 100-1000/1500 \mum range
for grain temperatures varying from 300 to 10 K. We find that the grain MAC
decreases when the grain temperature decreases and that the local spectral
index, beta, defined as the slope of the MAC curve, is anti-correlated with the
grain temperature. These variations, which are not observed in the crystallised
samples, are related to the amorphous nature of the samples. In addition, the
spectral shape of the MAC is complex: at short wavelengths (lambda < 500/700
\mum), beta is in the range 1.6 - 2.1 for all grain temperature and grain
composition whereas at longer wavelengths (lambda > 500/700 \mum), beta < 2 for
samples with a pyroxene stoichiometry and beta > 2 for samples with an olivine
stoichiometry. Hence, the simplifying asymptotic expression based on a single
temperature- and wavelength-independent spectral index used by astronomers is
not appropriate to describe the dust MAC and thus the dust emission, and may
induce significant errors on the derived parameters such as the dust mass and
the dust physical and chemical properties. Instead, dust emission models should
use the dust MAC as a function of wavelength and temperature.
[4]
oai:arXiv.org:astro-ph/0701226 [pdf] - 88355
Far-infrared to millimeter astrophysical dust emission I: A model based
on physical properties of amorphous solids
Submitted: 2007-01-09
We propose a new description of astronomical dust emission in the spectral
region from the Far-Infrared to millimeter wavelengths.
Unlike previous classical models, this description explicitly incorporates
the effect of the disordered internal structure of amorphous dust grains. The
model is based on results from solid state physics, used to interpret
laboratory data. The model takes into account the effect of absorption by
Disordered Charge Distribution, as well as the effect of absorption by
localized Two Level Systems.
We review constraints on the various free parameters of the model from theory
and laboratory experimental data. We show that, for realistic values of the
free parameters, the shape of the emission spectrum will exhibit very broad
structures which shape will change with the temperature of dust grains in a non
trivial way. The spectral shape also depends upon the parameters describing the
internal structure of the grains. This opens new perspectives as to identifying
the nature of astronomical dust from the observed shape of the FIR/mm emission
spectrum. A companion paper will provide an explicit comparison of the model
with astronomical data.