Normalized to: Nayman, P.
[1]
oai:arXiv.org:2001.04510 [pdf] - 2054159
A NECTAr-based upgrade for the Cherenkov cameras of the H.E.S.S.
12-meter telescopes
Ashton, Terry;
Backes, Michael;
Balzer, Arnim;
Berge, David;
Bolmont, Julien;
Bonnefoy, Simon;
Brun, Francois;
Chaminade, Thomas;
Delagnes, Eric;
Fontaine, Gerard;
Füßling, Matthias;
Giavitto, Gianluca;
Giebels, Berrie;
Glicenstein, Jean-Francois;
Gräber, Tobias;
Hinton, Jim;
Jahnke, Albert;
Klepser, Stefan;
Kossatz, Marko;
Kretzschmann, Axel;
Lefranc, Valentin;
Leich, Holger;
Lenain, Jean-Philippe;
Lüdecke, Hartmut;
Lypova, Iryna;
Manigot, Pascal;
Marandon, Vincent;
Moulin, Emmanuel;
Murach, Thomas;
de Naurois, Mathieu;
Nayman, Patrick;
Ohm, Stefan;
Penno, Marek;
Ross, Duncan;
Salek, David;
Schade, Markus;
Schwab, Thomas;
Shiningayamwe, Kleopas;
Stegmann, Christian;
Steppa, Constantin;
Tavernet, Jean-Paul;
Thornhill, Julian;
Toussnel, Francois;
Vincent, Pascal
Submitted: 2020-01-13
The High Energy Stereoscopic System (H.E.S.S.) is one of the three arrays of
imaging atmospheric Cherenkov telescopes (IACTs) currently in operation. It is
composed of four 12-meter telescopes and a 28-meter one, and is sensitive to
gamma rays in the energy range ~30 GeV - 100 TeV. The cameras of the 12-m
telescopes recently underwent a substantial upgrade, with the goal of improving
their performance and robustness. The upgrade involved replacing all camera
components except for the photomultiplier tubes (PMTs). This meant developing
new hardware for the trigger, readout, power, cooling and mechanical systems,
and new software for camera control and data acquisition. Several novel
technologies were employed in the cameras: the readout is built around the new
NECTAr digitizer chip, developed for the next generation of IACTs; the camera
electronics is fully controlled and read out via Ethernet using a combination
of FPGA and embedded ARM computers; the software uses modern libraries such as
Apache Thrift, ZMQ and Protocol buffers. This work describes in detail the
design and the performance of the upgraded cameras.
[3]
oai:arXiv.org:1708.04550 [pdf] - 1783695
Performance of the upgraded H.E.S.S. cameras
Bonnefoy, S.;
Ashton, T.;
Backes, M.;
Balzer, A.;
Berge, D.;
Brun, F.;
Chaminade, T.;
Delagnes, E.;
Fontaine, G.;
Füßling, M.;
Giavitto, G.;
Giebels, B.;
Glicenstein, J. F.;
Gräber, T.;
Hinton, J. A.;
Jahnke, A.;
Klepser, S.;
Kossatz, M.;
Kretzschmann, A.;
Lefranc, V.;
Leich, H.;
Lenain, J. P.;
Lüdecke, H.;
Lypova, I.;
Manigot, P.;
Marandon, V.;
Moulin, E.;
de Naurois, M.;
Nayman, P.;
Ohm, S.;
Penno, M.;
Ross, D.;
Salek, D.;
Schade, M.;
Schwab, T.;
Shiningayamwe, K.;
Stegmann, C.;
Steppa, C.;
Thornhill, J.;
Toussenel, F.
Submitted: 2017-08-15
The 14 years old cameras of the H.E.S.S. 12-m telescopes have been upgraded
in 2015/2016, with the goals of reducing the system failure rate, reducing the
dead time and improving the overall performance of the array. This conference
contribution describes the various tests that were carried out on the cameras
and their sub-components both in the lab and on site. It also gives an overview
of the commissioning and calibration procedures adopted during and after the
installation, including e.g. flat-fielding and trigger threshold scans.
Finally, it reports in detail about the overall performance of the four new
H.E.S.S. I cameras, using very recent data.
[4]
oai:arXiv.org:1707.04415 [pdf] - 1779472
Hardware and software architecture of the upgraded H.E.S.S. cameras
Klepser, S.;
Ashton, T.;
Backes, M.;
Balzer, A.;
Berge, D.;
Bonnefoy, S.;
Brun, F.;
Chaminade, T.;
Delagnes, E.;
Fontaine, G.;
Füßling, M.;
Giavitto, G.;
Giebels, B.;
Glicenstein, J. F.;
Gräber, T.;
Hinton, J. A.;
Jahnke, A.;
Kossatz, M.;
Kretzschmann, A.;
Lefranc, V.;
Leich, H.;
Lenain, J. P.;
Lüdecke, H.;
Lypova, I.;
Manigot, P.;
Marandon, V.;
Moulin, E.;
de Naurois, M.;
Nayman, P.;
Ohm, S.;
Penno, M.;
Ross, D.;
Salek, D.;
Schade, M.;
Schwab, T.;
Shiningayamwe, K.;
Stegmann, C.;
Steppa, C.;
Thornhill, J.;
Toussenel, F.
Submitted: 2017-07-14
In 2015/16, the photomultiplier cameras of the H.E.S.S. Cherenkov telescopes
CT1-4 have undergone a major upgrade. The entire electronics has been replaced,
using NECTAr chips for the front-end readout. A new ventilation system has been
installed and several auxiliary components have been replaced. Besides this,
the internal control and readout software was rewritten from scratch in a
modern and modular way. Ethernet technology was used wherever possible to
ensure both flexibility, stability and high bandwidth. An overview of the
installed components will be given.
[7]
oai:arXiv.org:1509.01232 [pdf] - 1271229
A major electronics upgrade for the H.E.S.S. Cherenkov telescopes 1-4
Giavitto, G.;
Ashton, T.;
Balzer, A.;
Berge, D.;
Brun, F.;
Chaminade, T.;
Delagnes, E.;
Fontaine, G.;
Füßling, M.;
Giebels, B.;
Glicenstein, J. F.;
Gräber, T.;
Hinton, J. A.;
Jahnke, A.;
Klepser, S.;
Kossatz, M.;
Kretzschmann, A.;
Lefranc, V.;
Leich, H.;
Lüdecke, H.;
Manigot, P.;
Marandon, V.;
Moulin, E.;
de, M.;
Nayman, P.;
Penno, M.;
Ross, D.;
Salek, D.;
Schade, M.;
Schwab, T.;
Simoni, R.;
Stegmann, C.;
Thornhill, J.;
Toussenel, F.
Submitted: 2015-09-03
The High Energy Stereoscopic System (H.E.S.S.) is an array of imaging
atmospheric Cherenkov telescopes (IACTs) located in the Khomas Highland in
Namibia. It consists of four 12-m telescopes (CT1-4), which started operations
in 2003, and a 28-m diameter one (CT5), which was brought online in 2012. It is
the only IACT system featuring telescopes of different sizes, which provides
sensitivity for gamma rays across a very wide energy range, from ~30 GeV up to
~100 TeV. Since the camera electronics of CT1-4 are much older than the one of
CT5, an upgrade is being carried out; first deployment was in 2015, full
operation is planned for 2016. The goals of this upgrade are threefold:
reducing the dead time of the cameras, improving the overall performance of the
array and reducing the system failure rate related to aging. Upon completion,
the upgrade will assure the continuous operation of H.E.S.S. at its full
sensitivity until and possibly beyond the advent of CTA. In the design of the
new components, several CTA concepts and technologies were used and are thus
being evaluated in the field: The upgraded read-out electronics is based on the
NECTAR readout chips; the new camera front- and back-end control subsystems are
based on an FPGA and an embedded ARM computer; the communication between
subsystems is based on standard Ethernet technologies. These hardware solutions
offer good performance, robustness and flexibility. The design of the new
cameras is reported here.
[8]
oai:arXiv.org:1508.06555 [pdf] - 1267007
NectarCAM : a camera for the medium size telescopes of the Cherenkov
Telescope Array
Glicenstein, J-F.;
Abril, O.;
Barrio, J-A.;
Blanch~Bigas, O.;
Bolmont, J.;
Bouyjou, F.;
Brun, P.;
Chabanne, E.;
Champion, C.;
Colonges, S.;
Corona, P.;
Delagnes, E.;
Delgado, C.;
Ginzov, C. Diaz;
Durand, D.;
Ernenwein, J-P.;
Fegan, S.;
Ferreira, O.;
Fesquet, M.;
Fiasson, A.;
Fontaine, G.;
Fouque, N.;
Gascon, D.;
Giebels, B.;
Henault, F.;
Hermel, R.;
Hoffmann, D.;
Horan, D.;
Houles, J.;
Jean, P.;
Jocou, L.;
Karkar, S.;
Knoedlseder, J.;
Kossakowski, R.;
Lamanna, G.;
LeFlour, T.;
Lenain, J-P.;
Leveque, A.;
Louis, F.;
Martinez, G.;
Moudden, Y.;
Moulin, E.;
Nayman, P.;
Nunio, F.;
Olive, J-F.;
Panazol, J-L.;
Pavy, S.;
Petrucci, P-O.;
Pierre, E.;
Prast, J.;
Punch, M.;
Ramon, P.;
Rateau, S.;
Ravel, T.;
Rosier-Lees, S.;
Sanuy, A.;
Shayduk, M.;
Sizun, P-Y.;
Sulanke, K-H.;
Tavernet, J-P.;
Tejedor~Alvarez, L-A.;
Toussenel, F.;
Vasileiadis, G.;
Voisin, V.;
Waegebert, V.;
Wischnewski, R.
Submitted: 2015-08-26
NectarCAM is a camera proposed for the medium-sized telescopes of the
Cherenkov Telescope Array (CTA) covering the central energy range of ~100 GeV
to ~30 TeV. It has a modular design and is based on the NECTAr chip, at the
heart of which is a GHz sampling Switched Capacitor Array and a 12-bit Analog
to Digital converter. The camera will be equipped with 265 7-photomultiplier
modules, covering a field of view of 8 degrees. Each module includes the
photomultiplier bases, high voltage supply, pre-amplifier, trigger, readout and
Ethernet transceiver. The recorded events last between a few nanoseconds and
tens of nanoseconds. The camera trigger will be flexible so as to minimize the
read-out dead-time of the NECTAr chips. NectarCAM is designed to sustain a data
rate of more than 4 kHz with less than 5\% dead time. The camera concept, the
design and tests of the various subcomponents and results of thermal and
electrical prototypes are presented. The design includes the mechanical
structure, cooling of the electronics, read-out, clock distribution, slow
control, data-acquisition, triggering, monitoring and services.
[9]
oai:arXiv.org:1310.5877 [pdf] - 1180134
The camera of the fifth H.E.S.S. telescope. Part I: System description
Bolmont, J.;
Corona, P.;
Gauron, P.;
Ghislain, P.;
Goffin, C.;
Riveros, L. Guevara;
Huppert, J. -F.;
Martineau-Huynh, O.;
Nayman, P.;
Parraud, J. -M.;
Tavernet, J. -P.;
Toussenel, F.;
Vincent, D.;
Vincent, P.;
Bertoli, W.;
Espigat, P.;
Punch, M.;
Besin, D.;
Delagnes, E.;
Glicenstein, J. -F.;
Moudden, Y.;
Venault, P.;
Zaghia, H.;
Brunetti, L.;
David, P. -Y.;
Dubois, J-M.;
Fiasson, A.;
Geffroy, N.;
Monteiro, I. Gomes;
Journet, L.;
Krayzel, F.;
Lamanna, G.;
Flour, T. Le;
Lees, S.;
Lieunard, B.;
Maurin, G.;
Mugnier, P.;
Panazol, J. -L.;
Prast, J.;
Chounet, L. -M.;
Degrange, B.;
Edy, E.;
Fontaine, G.;
Giebels, B.;
Hormigos, S.;
Khélifi, B.;
Manigot, P.;
Maritaz, P.;
de Naurois, M.;
Compin, M.;
Feinstein, F.;
Fernandez, D.;
Mehault, J.;
Rivoire, S.;
Royer, S.;
Sanguillon, M.;
Vasileiadis, G.
Submitted: 2013-10-22, last modified: 2014-05-26
In July 2012, as the four ground-based gamma-ray telescopes of the H.E.S.S.
(High Energy Stereoscopic System) array reached their tenth year of operation
in Khomas Highlands, Namibia, a fifth telescope took its first data as part of
the system. This new Cherenkov detector, comprising a 614.5 m^2 reflector with
a highly pixelized camera in its focal plane, improves the sensitivity of the
current array by a factor two and extends its energy domain down to a few tens
of GeV.
The present part I of the paper gives a detailed description of the fifth
H.E.S.S. telescope's camera, presenting the details of both the hardware and
the software, emphasizing the main improvements as compared to previous
H.E.S.S. camera technology.
[11]
oai:arXiv.org:1307.4545 [pdf] - 1941894
The NectarCAM camera project
Glicenstein, J-F.;
Barcelo, M.;
Barrio, J-A.;
Blanch, O.;
Boix, J.;
Bolmont, J.;
Boutonnet, C.;
Cazaux, S.;
Chabanne, E.;
Champion, C.;
Chateau, F.;
Colonges, S.;
Corona, P.;
Couturier, S.;
Courty, B.;
Delagnes, E.;
Delgado, C.;
Ernenwein, J-P.;
Fegan, S.;
Ferreira, O.;
Fesquet, M.;
Fontaine, G.;
Fouque, N.;
Henault, F.;
Gascón, D.;
Herranz, D.;
Hermel, R.;
Hoffmann, D.;
Houles, J.;
Karkar, S.;
Khelifi, B.;
Knödlseder, J.;
Martinez, G.;
Lacombe, K.;
Lamanna, G.;
LeFlour, T.;
Lopez-Coto, R.;
Louis, F.;
Mathieu, A.;
Moulin, E.;
Nayman, P.;
Nunio, F.;
Olive, J-F.;
Panazol, J-L.;
Petrucci, P-O.;
Punch, M.;
Prast, J.;
Ramon, P.;
Riallot, M.;
Ribó, M.;
Rosier-Lees, S.;
Sanuy, A.;
Siero, J.;
Tavernet, J-P.;
Tejedor, L. A.;
Toussenel, F.;
Vasileiadis, G.;
Voisin, V.;
Waegebert, V.;
Zurbach, C.
Submitted: 2013-07-17
In the framework of the next generation of Cherenkov telescopes, the
Cherenkov Telescope Array (CTA), NectarCAM is a camera designed for the medium
size telescopes covering the central energy range of 100 GeV to 30 TeV.
NectarCAM will be finely pixelated (~ 1800 pixels for a 8 degree field of view,
FoV) in order to image atmospheric Cherenkov showers by measuring the charge
deposited within a few nanoseconds time-window. It will have additional
features like the capacity to record the full waveform with GHz sampling for
every pixel and to measure event times with nanosecond accuracy. An array of a
few tens of medium size telescopes, equipped with NectarCAMs, will achieve up
to a factor of ten improvement in sensitivity over existing instruments in the
energy range of 100 GeV to 10 TeV. The camera is made of roughly 250
independent read-out modules, each composed of seven photo-multipliers, with
their associated high voltage base and control, a read-out board and a
multi-service backplane board. The read-out boards use NECTAr (New Electronics
for the Cherenkov Telescope Array) ASICs which have the dual functionality of
analogue memories and Analogue to Digital Converter (ADC). The camera trigger
to be used will be flexible so as to minimize the read-out dead-time of the
NECTAr chips. We present the camera concept and the design and tests of the
various subcomponents. The design includes the mechanical parts, the cooling of
the electronics, the readout, the data acquisition, the trigger, the monitoring
and services.
[12]
oai:arXiv.org:astro-ph/0408375 [pdf] - 66866
The Trigger System of the H.E.S.S. Telescope Array
Submitted: 2004-08-20
H.E.S.S. -- The High Energy Stereoscopic System-- is a new system of large
atmospheric Cherenkov telescopes for GeV/TeV Gamma-ray astronomy. This paper
describes the trigger system of H.E.S.S. with emphasis on the multi-telescope
array level trigger. The system trigger requires the simultaneous detection of
air-showers by several telescopes at the hardware level. This requirement
allows a suppression of background events which in turn leads to a lower system
energy threshold for the detection of Gamma-rays. The implementation of the
H.E.S.S. trigger system is presented along with data taken to characterise its
performance.
