Normalized to: Naylor, W.
[1]
oai:arXiv.org:1506.08344 [pdf] - 1438447
Logarithmic divergences in the $k$-inflationary power spectra computed
through the uniform approximation
Submitted: 2015-06-27, last modified: 2015-12-20
We investigate a calculation method for solving the Mukhanov-Sasaki equation
in slow-roll $k$-inflation based on the uniform approximation (UA) in
conjunction with an expansion scheme for slow-roll parameters with respect to
the number of $e$-folds about the so-called \textit{turning point}. Earlier
works on this method has so far gained some promising results derived from the
approximating expressions for the power spectra among others, up to second
order with respect to the Hubble and sound flow parameters, when compared to
other semi-analytical approaches (e.g., Green's function and WKB methods).
However, a closer inspection is suggestive that there is a problem when
higher-order parts of the power spectra are considered; residual logarithmic
divergences may come out that can render the prediction physically
inconsistent. Looking at this possibility, we map out up to what order with
respect to the mentioned parameters several physical quantities can be
calculated before hitting a logarithmically divergent result. It turns out that
the power spectra are limited up to second order, the tensor-to-scalar ratio up
to third order, and the spectral indices and running converge to all orders.
This indicates that the expansion scheme is incompatible with the working
equations derived from UA for the power spectra but compatible with that of the
spectral indices. For those quantities that involve logarithmically divergent
terms in the higher-order parts, existing results in the literature for the
convergent lower-order parts calculated in the equivalent fashion should be
viewed with some caution; they do not rest on solid mathematical ground.
[2]
oai:arXiv.org:1503.08073 [pdf] - 1241775
Adiabatic regularisation of power spectra in $k$-inflation
Submitted: 2015-03-25, last modified: 2015-07-04
We look at the question posed by Parker et al. about the effect of UV
regularisation on the power spectrum for inflation. Focusing on the slow-roll
$k$-inflation, we show that up to second order in the Hubble and sound flow
parameters, the adiabatic regularisation of such model leads to no difference
in the power spectrum apart from certain cases that violate near scale
invariant power spectra. Furthermore, extending to non-minimal $k$-inflation,
we establish the equivalence of the subtraction terms in the adiabatic
regularisation of the power spectrum in Jordan and Einstein frames.
[3]
oai:arXiv.org:1409.5454 [pdf] - 869665
Simulating (p)reheating after inflation via the DCE?
Submitted: 2014-09-18
We note some close parallels between preheating/perturbative reheating,
(p)reheating, models in post-inflationary cosmology and the dynamical Casimir
effect (DCE) in quantum optics. For the plasma-mirror model we show how the
effective plasma mass (arising from conduction electrons) behaves like an
oscillating inflaton field, while created photons behave like a scalar field
coupled quadratically to the inflaton. Furthermore, the effect of spacetime
expansion can also be incorporated by varying the dielectric function. We
propose an experiment that could mimic (p)reheating for both narrow and broad
parametric resonance, by employing technology already being used in attempts to
detect DCE photons via plasma-mirrors.
[4]
oai:arXiv.org:hep-th/0702098 [pdf] - 118054
Casimir effect in rugby-ball type flux compactifications
Submitted: 2007-02-13, last modified: 2007-03-24
As a continuation of the work in \cite{mns}, we discuss the Casimir effect
for a massless bulk scalar field in a 4D toy model of a 6D warped flux
compactification model,to stabilize the volume modulus. The one-loop effective
potential for the volume modulus has a form similar to the Coleman-Weinberg
potential. The stability of the volume modulus against quantum corrections is
related to an appropriate heat kernel coefficient. However, to make any
physical predictions after volume stabilization, knowledge of the derivative of
the zeta function, $\zeta'(0)$ (in a conformally related spacetime) is also
required. By adding up the exact mass spectrum using zeta function
regularization, we present a revised analysis of the effective potential.
Finally, we discuss some physical implications, especially concerning the
degree of the hierarchy between the fundamental energy scales on the branes.
For a larger degree of warping our new results are very similar to the previous
ones \cite{mns} and imply a larger hierarchy. In the non-warped (rugby-ball)
limit the ratio tends to converge to the same value, independently of the bulk
dilaton coupling.
[5]
oai:arXiv.org:hep-th/0508093 [pdf] - 117650
Quantum fluctuations on a thick de Sitter brane
Submitted: 2005-08-13, last modified: 2006-01-06
We investigate quantum fluctuations on a de Sitter (dS) brane, which has its
own thickness, in order to examine whether or not the finite thickness of the
brane can act as a natural cut-off for the Kaluza-Klein (KK) spectrum. We
calculate the amplitude of the KK modes and the bound state by using the zeta
function method after a dimensional reduction.We show that the KK amplitude is
finite for a given brane thickness and in the thin wall limit the standard
surface divergent behavior is recovered. The strength of the divergence in the
thin wall limit depends on the number of dimensions, e.g., logarithmic on a two
dimensional brane and quadratic on a four dimensional brane. We also find that
the amplitude of the bound state mode and KK modes depends on the choice of
renormalization scale; and for fixed renormalization scales the bound state
mode is insensitive to the brane thickness both for two and four-dimensional dS
branes.
[6]
oai:arXiv.org:hep-ph/0511105 [pdf] - 115176
Electroweak inflation and reheating in the NMSSM
Submitted: 2005-11-09
A low reheating temperature is now well motivated by the recently
reconsidered gravitino problem, if we incorporate supergravity. In this
article, we propose a model which naturally realizes a low reheating
temperature. The model is based on the next to minimal supersymmetric standard
model (NMSSM) by identifying a singlet scalar field as the inflaton. This
entertains the possibility that the inflaton may be detected at future
colliders, such as the LHC.
[7]
oai:arXiv.org:hep-ph/0510003 [pdf] - 115143
Reheat Temperature and the Right-handed Neutrino Mass
Submitted: 2005-10-01, last modified: 2005-10-26
We discuss the reheating temperature in the instant preheating scenario. In
this scenario, at the last stage of inflation, the inflaton field first decays
into another scalar field with an enormous number density via the instant
preheating mechanism. Subsequently, the produced scalar field decays into
normal matter accompanied by the usual reheating mechanism. As an inflationary
model, we identify the inflaton as a field which gives rise to a mass for the
right-handed (s)neutrino. One of the interesting consequences of the instant
preheating mechanism is the fact that the reheating temperature is proportional
to the mass of the decayed particle, {\it the right-handed sneutrino}, $T_R
\propto M_R$. This is very different from the ordinary perturbative reheating
scenario in which the reheating temperature is proportional to the mass of the
inflaton.
[8]
oai:arXiv.org:hep-th/0510117 [pdf] - 254211
Can thick braneworlds be self-consistent?
Submitted: 2005-10-14, last modified: 2005-10-25
We discuss the backreaction of a massless, minimally coupled, quantized
scalar field on a thick, two-dimensional de Sitter (dS) brane as an extension
of our previous work. We show that a finite brane thickness naturally
regularizes the backreaction on the brane. The quantum backreaction exhibits a
quadratic divergence in the thin wall limit. We also give a theoretical bound
on the brane thickness, in terms of the brane self-consistency of the quantum
corrected Einstein equation, namely the requirement that the size of the
backreaction should be smaller than that of the background stress-energy at the
center of the brane. Finally, we discuss the brane self-consistency for the
case of a four-dimensional dS brane.