The intracluster medium of a galaxy cluster often shows an extended quasi-spiral structure, accentuated by tangential discontinuities known as cold fronts (CFs). These discontinuities are thought to isolate between low-entropy, high-metallicity gas inside (i.e., below) the CF that was lifted from the center of the cluster by some radial factor $f_i$, and high-entropy, low-metallicity gas outside the CF that was pushed inward by a factor $f_o$. We find broad support for such a picture, by comparing the entropy and metallicity discontinuities with the respective azimuthal averages, using newly deprojected thermal profiles in clusters A2029, A2142, A2204 and Centaurus, supplemented by deprojected CFs from the literature. In particular, the mean advection factors $f_K$ and $f_Z$, inferred respectively from entropy and metallicity, strongly correlate ($\mathcal{R}=0.7^{+0.2}_{-0.3}$) with each other, consistent with large-scale advection. However, unlike sloshing simulations, in which the inside/outside phases are an inflow/outflow settling back to equilibrium after a violent perturbation, our results are more consistent with an outflow/inflow, with the fast, Mach $\mathcal{M}_i\sim0.8$ gas inside the CF being a rapidly heated or mixed outflow, probably originating from the cD galaxy, and gas outside the CF being a $\mathcal{M}_o\sim0.03$, slowly-cooling inflow. In particular, entropy indicates an outside advection factor $f_{Ko}\simeq 1.33\pm0.04$ that is approximately constant in all CFs, gauging the distance traversed by inflowing gas within a cooling time. In contrast, $1.1\lesssim f_{Ki}\lesssim 2.5$ and $1\lesssim f_Z\lesssim 17$ vary considerably among clusters, and strongly correlate ($3.1\sigma\text{-}4.2\sigma$) with the virial mass, $f_{Ki}\propto M_{200}^{0.14\pm0.07}$ and $f_Z\propto M_{200}^{1.4\pm0.4}$, suggesting that each cluster sustains a quasi-steady spiral flow.

Tangential discontinuities known as cold fronts (CFs) are abundant in groups and clusters of galaxies (GCs). The relaxed, spiral-type CFs were initially thought to be isobaric, but a significant, $10\%$--$20\%$ jump in the thermal pressure $P_t$ was reported when deprojected CFs were stacked, interpreted as missing $P_t$ below the CFs (i.e. at smaller radii $r$) due to a locally-enhanced nonthermal pressure $P_{nt}$. We report a significant ($\sim4.3\sigma$) deprojected jump in $P_t$ across a single sharp CF in the Centaurus cluster. Additional seven CFs are deprojected in the GCs A2029, A2142, A2204, and Centaurus, all found to be consistent (stacked: $\sim1.9\sigma$) with similar pressure jumps. Combining our sample with high quality deprojected CFs from the literature indicates pressure jumps at significance levels ranging between $2.7\sigma$ and $5.0\sigma$, depending on assumptions. Our nominal results are consistent with $P_{nt}\simeq (0.1\mbox{--}0.3)P_t$ just below the CF. We test different deprojection and analysis methods to confirm that our results are robust, and show that without careful deprojection, an opposite pressure trend may incorrectly be inferred. Analysing all available deprojected data, we also find: (i) a nearly constant CF contrast $q$ of density and temperature within each GC, monotonically increasing with the GC mass $M_{200}$ as $q\propto M_{200}^{0.23\pm0.04}$; (ii) hydrostatic mass discontinuities indicating fast bulk tangential flows below all deprojected CFs, with a mean Mach number $\sim0.76$; and (iii) the newly deprojected CFs are consistent (stacked: $\sim2.9\sigma$) with a $1.25^{+0.09}_{-0.08}$ metallicity drop across the CF. These findings suggest that GCs quite generally harbor extended spiral flows.

Compressible flows around blunt objects have diverse applications, but current analytic treatments are inaccurate and limited to narrow parameter regimes. We show that the gas-dynamic flow in front of an axisymmetric blunt body is accurately derived analytically using a low order expansion of the perpendicular gradients in terms of the parallel velocity. This reproduces both subsonic and supersonic flows measured and simulated for a sphere, including the transonic regime and the bow shock properties. Some astrophysical implications are outlined, in particular for planets in the solar wind and for clumps and bubbles in the intergalactic medium. The bow shock standoff distance normalized by the obstacle curvature is $\sim 2/(3g)$ in the strong shock limit, where $g$ is the compression ratio. For a subsonic Mach number $M$ approaching unity, the thickness $\delta$ of an initially weak, draped magnetic layer is a few times larger than in the incompressible limit, with amplification $\sim ({1+1.3M^{2.6}})/({3\delta})$.

Compressible flows around blunt objects have diverse applications, but present analytic treatments are inaccurate and limited to narrow parameter regimes. We show that the flow in front of an axisymmetric body is accurately derived analytically using a low order expansion of the perpendicular gradients in terms of the parallel velocity. This reproduces both subsonic and supersonic flows measured and simulated for a sphere, including the transonic regime and the bow shock properties.

Magnetization in highly conductive plasmas is ubiquitous to astronomical systems. Flows in such media can be described by three path functions $\Lambda_\alpha$, or, for a steady flow, by two stream functions $\lambda_\kappa$ and an additional field such as the mass density $\rho$, velocity $v$, or travel time $\Delta t$. While typical analyses of a frozen magnetic field $\boldsymbol{B}$ are problem-specific and involve nonlocal gradients of the fluid element position $\boldsymbol{x}(t)$, we derive the general, local (in $\Lambda$ or $\lambda$ space) solution $\boldsymbol{B}=(\partial\boldsymbol{x}/\partial\Lambda_\alpha)_t \tilde{B}_\alpha \rho/\tilde{\rho}$, where Lagrangian constants denoted by a tilde are directly fixed at a boundary hypersurface $\tilde{H}$ on which $\boldsymbol{B}$ is known. For a steady flow, $\tilde{\rho}\boldsymbol{B}/\rho=(\partial\boldsymbol{x}/\partial\lambda_\kappa)_{\Delta t}\tilde{B}_\kappa+\boldsymbol{v}\tilde{B}_3/\tilde{v}$; here the electric field $\boldsymbol{E}\sim(\tilde{B}_2\boldsymbol{\nabla}\lambda_1-\tilde{B}_1\boldsymbol{\nabla}\lambda_2)/\tilde{\rho}$ depends only on $\lambda_\kappa$ and the boundary conditions. Illustrative special cases include compressible axisymmetric flows and incompressible flows around a sphere, showing that viscosity and compressibility enhance the magnetization and lead to thicker boundary layers. Our method is especially useful for directly computing electric fields, and for addressing upstream magnetic fields that vary in spacetime. We thus estimate the electric fields above heliospheres and magnetospheres, compute the draping of magnetic substructure around a planetary body, and demonstrate the resulting inverse polarity reversal layer. Our analysis can be incorporated into existing hydrodynamic codes that are based on stream or path functions. (Abridged)