The recent observation of interstellar objects, 1I/Oumuamua and 2I/Borisov cross the solar system opened new opportunities for planetary science and planetary defense. As the first confirmed objects originating outside of the solar system, there are myriads of origin questions to explore and discuss, including where they came from, how did they get here and what are they composed of. Besides, there is a need to be cognizant especially if such interstellar objects pass by the Earth of potential dangers of impact. Specifically, in the case of Oumuamua, which was detected after its perihelion, passed by the Earth at around 0.2 AU, with an estimated excess speed of 60 km/s relative to the Earth. Without enough forewarning time, a collision with such high-speed objects can pose a catastrophic danger to all life Earth. Such challenges underscore the importance of detection and exploration systems to study these interstellar visitors. The detection system can include a spacecraft constellation with zenith-pointing telescope spacecraft. After an event is detected, a spacecraft swarm can be deployed from Earth to flyby past the visitor. The flyby can then be designed to perform a proximity operation of interest. This work aims to develop algorithms to design these swarm missions through the IDEAS (Integrated Design Engineering & Automation of Swarms) architecture. Specifically, we develop automated algorithms to design an Earth-based detection constellation and a spacecraft swarm that generates detailed surface maps of the visitor during the rendezvous, along with their heliocentric cruise trajectories.

Near-Earth small-body mission targets 162173 Ryugu, 101955 Bennu, and 25143 Itokawa produce gravity fields around 4 orders of magnitude below that of Earth and their irregular shapes, combined with rotational effects produce varying surface potentials. Still, we observe familiar geologic textures and landforms that are the result of the granular physical processes that take place on their surfaces. The nature of these landforms, however, their origins, and how these surfaces react to interrogation by probes, landers, rovers, and penetrators, remain largely unknown, and therefore landing on an asteroid and manipulating its surface material remains a daunting challenge. The AOSAT+ design is a 12U CubeSat that will be in Low-Earth Orbit (LEO) and that will operate as a spinning on-orbit centrifuge. Part of this 12U CubeSat will contain a laboratory that will recreate asteroid surface conditions using crushed meteorite as a regolith proxy. The spinning of the laboratory will simulate the surface gravity of asteroids 2 km and smaller. The result is a bed of realistic regolith, the environment that landers and diggers and maybe astronauts will interact with. A crucial component of this mission involves the reproduction of the experimental results in numerical simulation in order to extract the material parameters of the regolith and its behavior in a sustained, very low but nonzero-gravity environment.

The exploration of small bodies in the Solar System is a high priority planetary science. Asteroids, comets, and planetary moons yield important information about the evolution of the Solar System. Additionally, they could provide resources for a future space economy. While much research has gone into exploring asteroids and comets, dedicated spacecraft missions to planetary moons are few and far between. There are three fundamental challenges of a spacecraft mission to the planetary moons: The first challenge is that the spheres of influence of most moons (except that of Earth) are small and, in many cases, virtually absent. The second is that many moons are tidally locked to their planets, which means that an observer on the planet will have an entire hemisphere, which is always inaccessible. The third challenge is that at a given time about half of the region will be in the Sun's shadow. Therefore, a single spacecraft mission to observe the planetary moon cannot provide complete coverage. Such a complex task can be solved using a swarm approach, where the mapping task is delegated to multiple low-cost spacecraft. Clearly, the design of a swarm mission for such a dynamic environment is challenging. For this reason, we have proposed the Integrated Design Engineering & Automation of Swarms (IDEAS) software to perform automated end-to-end design of swarm missions. Specifically, it will use a sub-module known as the Automated Swarm Designer module to find optimal swarm configurations suited for a given mission. In our previous work, we have developed the Automated Swarm Design module to find swarm configurations for asteroid mapping operations. In this work, we will evaluate the capability of the Automated Swarm module to design missions to planetary moons.

The rapid advancement and miniaturization of spacecraft electronics, sensors, actuators, and power systems have resulted in growing proliferation of small-spacecraft. Coupled with this is the growing number of rocket launches, with left-over debris marking their trail. The space debris problem has also been compounded by test of several satellite killer missiles that have left large remnant debris fields. In this paper, we assume a future in which the Kessler Effect has taken hold and analyze the implications on the design of small-satellites and CubeSats. We use a multiprong approach of surveying the latest technologies, including the ability to sense space debris in orbit, perform obstacle avoidance, have sufficient shielding to take on small impacts and other techniques to mitigate the problem. Detecting and tracking space debris threats on-orbit is expected to be an important approach and we will analyze the latest vision algorithms to perform the detection, followed by quick reaction control systems to perform the avoidance. Alternately there may be scenarios where the debris is too small to track and avoid. In this case, the spacecraft will need passive mitigation measures to survive the impact. Based on these conditions, we develop a strawman design of a small spacecraft to mitigate these challenges. Based upon this study, we identify if there is sufficient present-day COTS technology to mitigate or shield satellites from the problem. We conclude by outlining technology pathways that need to be advanced now to best prepare ourselves for the worst-case eventuality of Kessler Effect taking hold in the upper altitudes of Low Earth Orbit.

Earth is constantly being bombarded with material from space. Most of the natural material end up being dust grains that litter the surface of Earth, but larger bodies are known to impact every few decades. The most recent large impact was Chelyabinsk which set off a 500-kiloton explosion which was 40 times that of the Hiroshima nuclear explosion. Apart from meteors, there is a growing threat of space assets deorbiting. With these impending space threats, it is critical to have a constellation of satellites to autonomously lookout for meteors and reentering space debris. By using multiple spacecraft, it is possible to perform multipoint observation of the event. Through multipoint observation, it is possible to triangulate the location of the observed event. The detection, tracking, and analysis of these objects all need to be performed autonomously. Our previous work focused on developing several vision algorithms including blob-detection, feature detection, and neural network-based image segment classification. For this multipoint observation to occur, it requires multiple spacecraft to coordinate their actions particularly fixating on the space observation target. Furthermore, communication and coordination are needed for bringing new satellites into observation view and removing other satellites that have lost their view. In this paper, we analyze state-of-the-art observation technology for small satellites and perform detailed design of its implementation. Through this study, we estimate the error estimates on position, velocity, and acceleration. We presume use of low to mid-tier cameras for the spacecraft.

Understanding the physics of small bodies such as asteroids, comets, and planetary moons will help us understand the formation of the solar system, and also provide us with resources for a future space economy. Due to these reasons, missions to small bodies are actively being pursued. However, the surfaces of small bodies contain unpredictable and interesting features such as craters, dust, and granular matter, which need to be observed carefully before a lander mission is even considered. This presents the need for a surveillance spacecraft to observe the surface of small bodies where these features exist. While traditionally, the small body exploration has been performed by a large monolithic spacecraft, a group of small, low-cost spacecraft can enhance the observational value of the mission. Such a spacecraft swarm has the advantage of providing longer observation time and is also tolerant to single point failures. In order to optimize a space-craft swarm mission design, we proposed the Integrated Design Engineering & Automation of Swarms (IDEAS) software which will serve as an end-to-end tool for theoretical swarm mission design. The current work will focus on developing the Automated Swarm Designer module of the IDEAS software by extending its capabilities for exploring surface features on small bodies while focusing on the attitude behaviors of the spacecraft in the swarm. We begin by classifying space-craft swarms into 5 classes based on the level of coordination. In the current work, we design Class 2 swarms, whose spacecraft operate in a decentralized fashion but coordinate for communication. We demonstrate the Class 2 swarm in 2 different configurations, based on the roles of the participating spacecraft.

Planetary bodies such as asteroids, comets, and planetary moons are high-value science targets as they hold important information about the formation and evolution of our solar system. However, due to their low-gravity, variable sizes and shapes, dedicated orbiting spacecraft missions around these target bodies is difficult. Therefore, many planetary bodies are observed during flyby encounters, and consequently, the mapping coverage of the target body is limited. In this work, we propose the use of a spacecraft swarm to provide complete surface maps of a planetary body during a close encounter flyby. With the advancement of low-cost spacecraft technology, such a swarm can be realized by using multiple miniature spacecraft. The design of a swarm mission is a complex multi-disciplinary problem. To get started, we propose the Integrated Design Engineering & Automation of Swarms (IDEAS) software. In this work, we will introduce the development of the Automated Swarm Designer module of the software and apply it to total surface mapping of asteroid 433 Eros through flybys.

The wide availability of Commercial Off-The-Shelf (COTS) electronics that can withstand Low Earth Orbit conditions has opened avenue for wide deployment of CubeSats and small-satellites. CubeSats thanks to their low developmental and launch costs offer new opportunities for rapidly demonstrating on-orbit surveillance capabilities. In our earlier work, we proposed development of SWIMSat (Space based Wide-angle Imaging of Meteors) a 3U CubeSat demonstrator that is designed to observe illuminated objects entering the Earth's atmosphere. The spacecraft would operate autonomously using a smart camera with vision algorithms to detect, track and report of objects. Several CubeSats can track an object in a coordinated fashion to pinpoint an object's trajectory. An extension of this smart camera capability is to track unilluminated objects utilizing capabilities we have been developing to track and navigate to Near Earth Objects (NEOs). This extension enables detecting and tracking objects that can't readily be detected by humans. The system maintains a dense star map of the night sky and performs round the clock observations. Standard optical flow algorithms are used to obtain trajectories of all moving objects in the camera field of view. Through a process of elimination, certain stars maybe occluded by a transiting unilluminated object which is then used to first detect and obtain a trajectory of the object. Using multiple cameras observing the event from different points of view, it may be possible then to triangulate the position of the object in space and obtain its orbital trajectory. In this work, the performance of our space object detection algorithm coupled with a spacecraft guidance, navigation, and control system is demonstrated.

We advocate a low-cost strategy for long-duration research into the 'milligravity' environment of asteroids, comets and small moons, where surface gravity is a vector field typically less than 1/1000 the gravity of Earth. Unlike the microgravity environment of space, there is a directionality that gives rise, over time, to strangely familiar geologic textures and landforms. In addition to advancing planetary science, and furthering technologies for hazardous asteroid mitigation and in-situ resource utilization, simplified access to long-duration milligravity offers significant potential for advancing human spaceflight, biomedicine and manufacturing. We show that a commodity 3U ($10\times10\times34$ cm$^3$) cubesat containing a laboratory of loose materials can be spun to 1 rpm = $2\pi/60$ s$^{-1}$ on its long axis, creating a centrifugal force equivalent to the surface gravity of a kilometer-sized asteroid. We describe the first flight demonstration, where small meteorite fragments will pile up to create a patch of real regolith under realistic asteroid conditions, paving the way for subsequent missions where landing and mobility technology can be flight-proven in the operational environment, in Low-Earth Orbit (LEO). The 3U design can be adapted for use onboard the International Space Station (ISS) to allow for variable gravity experiments under ambient temperature and pressure for a broader range of experiments.

Near Earth Asteroids (NEAs) are thought to contain a wealth of resources, including water, iron, titanium, nickel, platinum and silicates. Future space missions that can exploit these resources by performing In-Situ Resource Utilization (ISRU) gain substantial benefit in terms of range, payload capacity and mission flexibility. Compared to the Moon or Mars, the milligravity on some asteroids demands a fraction of the energy for digging and accessing hydrated regolith just below the surface. However, asteroids and small-bodies, because of their low gravity present a major challenge in landing, surface excavation and resource capture. These challenges have resulted in adoption of a "touch and go techniques", like the upcoming Osiris-rex sample-return mission. Previous asteroid excavation efforts have focused on discrete capture events (an extension of sampling technology) or whole-asteroid capture and processing. This paper analyzes the control of a bucket-wheel design for asteroid or small-body excavation. Our study focuses on system design of two counter rotating bucket-wheels that are attached to a hovering spacecraft. Regolith is excavated and heated to 1000 C to extract water. The water in turn is electrolyzed to produce hydrogen and oxygen for rocket fuel. We analyze control techniques to maximize traction of the bucket-wheels on the asteroid surface and minimize lift-off the surface, together with methods to dig deeper into the asteroid surface. Our studies combine analytical models, with simulation and hardware testing. For initial evaluation of material-spacecraft dynamics and mechanics, we assume lunar-like regolith for bulk density, particle size and cohesion. Our early studies point towards a promising pathway towards refinement of this technology for demonstration aboard a future space mission.

The application of GNC devices on small robots is a game-changer that enables these robots to be mobile on low-gravity planetary surfaces and small bodies. Use of reaction wheels enables these robots to roll, hop, summersault and rest on precarious/sloped surfaces that would otherwise not be possible with conven-tional wheeled robots. We are extending this technology to enable robots to climb off-world canyons, cliffs and caves. A single robot may slip and fall, however, a multirobot system can work cooperatively by being interlinked using spring-tethers and work much like a team of mountaineers to systematically climb a slope. A multirobot system as we will show in this paper can climb sur-faces not possible with a single robot alone. We consider a team of four robots that are interlinked with tethers in an 'x' configuration. Each robot secures itself to a slope using spiny gripping actuators, and one by one each robot moves up-wards by crawling, rolling or hopping up the slope. If any one of the robots loses grip, slips or falls, the remaining robots will be holding it up as they are anchored. This distributed controls approach to cliff climbing enables the system to reconfigure itself where possible and avoid getting stuck at one hard to reach location. Instead, the risk is distributed and through close cooperation, the robots can identify multiple trajectories to climb a cliff or rugged surface. The benefits can also be realized on milligravity surfaces such as asteroids. Too fast a jump can result in the robot flying off the surface into space. Having multiple robots anchored to the surface keeps the entire system secure. Our work combines dynamics and control simulation to evaluate the feasibility of our approach. The simulation results show a promising pathway towards advanced development of this technology on a team of real robots.

Wheeled ground robots are limited from exploring extreme environments such as caves, lava tubes and skylights. Small robots that can utilize unconventional mobility through hopping, flying or rolling can overcome these limitations. Mul-tiple robots operating as a team offer significant benefits over a single large ro-bot, as they are not prone to single-point failure, enable distributed command and control and enable execution of tasks in parallel. These robots can complement large rovers and landers, helping to explore inaccessible sites, obtaining samples and for planning future exploration missions. Our robots, the SphereX, are 3-kg in mass, spherical and contain computers equivalent to current smartphones. They contain an array of guidance, navigation and control sensors and electronics. SphereX contains room for a 1-kg science payload, including for sample return. Our work in this field has recognized the need for miniaturized chemical mobility systems that provide power and propulsion. Our research explored the use of miniature rockets, including solid rockets, bi-propellants including RP1/hydrogen-peroxide and polyurethane/ammonium-perchlorate. These propulsion options provide maximum flight times of 10 minutes on Mars. Flying, especially hovering consumes significant fuel; hence, we have been developing our robots to perform ballistic hops that enable the robots to travel efficiently over long distances. Techniques are being developed to enable mid-course correction during a ballistic hop. Using multiple cameras, it is possible to reconstitute an image scene from motion blur. Hence our approach is to enable photo mapping as the robots travel on a ballistic hop. The same images would also be used for navigation and path planning. Using our proposed design approach, we are developing low-cost methods for surface exploration of planetary bodies using a network of small robots.

CubeSats are emerging as low-cost tools to perform astronomy, exoplanet searches and earth observation. These satellites can target an object for science observation for weeks on end. This is typically not possible on larger missions where usage time is shared. The problem of designing an attitude control system for CubeSat telescopes is very challenging because current choice of actuators such as reaction-wheels and magnetorquers can induce jitter on the spacecraft due to moving mechanical parts and due to external disturbances. These telescopes may contain cryo-pumps and servos that introduce additional vibrations. A better solution is required. In our paper, we analyze the feasibility of utilizing solar radiation pressure (SRP) and radiometric force to achieve precise attitude control. Our studies show radiometric actuators to be a viable method to achieve precise pointing. The device uses 8 thin vanes of different temperatures placed in a near-vacuum chamber. These chambers contain trace quantities of lightweight, inert gasses like argon. The temperature gradient across the vanes causes the gas molecules to strike the vanes differently and thus inducing a force. By controlling these forces, it's possible to produce a torque to precisely point or spin a spacecraft. We present a conceptual design of a CubeSat that is equipped with these actuators. We then analyze the potential slew maneuver and slew rates possible with these actuators by simulating their performance. Our analytical and simulation results point towards a promising pathway for laboratory testing of this technology and demonstration of this technology in space.

Current spacecraft need to launch with all of their required fuel for travel. This limits the system performance, payload capacity, and mission flexibility. One compelling alternative is to perform In-Situ Resource Utilization (ISRU) by extracting fuel from small bodies in local space such as asteroids or small satellites. Compared to the Moon or Mars, the microgravity on an asteroid demands a fraction of the energy for digging and accessing hydrated regolith just below the surface. Previous asteroid excavation efforts have focused on discrete capture events (an extension of sampling technology) or whole-asteroid capture and processing. This paper proposes an optimized bucket wheel design for surface excavation of an asteroid or small-body. Asteroid regolith is excavated and water extracted for use as rocket propellant. Our initial study focuses on system design, bucket wheel mechanisms, and capture dynamics applied to ponded materials known to exist on asteroids like Itokawa and Eros and small satellites like Phobos and Deimos. For initial evaluation of material-spacecraft dynamics and mechanics, we assume lunar-like regolith for bulk density, particle size and cohesion. We shall present our estimates for the energy balance of excavation and processing versus fuel gained. Conventional electrolysis of water is used to produce hydrogen and oxygen. It is compared with steam for propulsion and both show significant delta-v. We show that a return trip from Deimos to Earth is possible for a 12 kg craft using ISRU processed fuel.

CubeSats and small satellites are emerging as low-cost tools to perform astronomy, exoplanet searches and earth observation. These satellites can be dedicated to pointing at targets for weeks or months at a time. This is typically not possible on larger missions where usage is shared. Current satellites use reaction wheels and where possible magneto-torquers to control attitude. However, these actuators can induce jitter due to various sources. In this work, we introduce a new class of actuators that exploit radiometric forces induced by gasses on surface with a thermal gradient. Our work shows that a CubeSat or small spacecraft mounted with radiometric actuators can achieve precise pointing of few arc-seconds or less and avoid the jitter problem. The actuator is entirely solid-state, containing no moving mechanical components. This ensures high-reliability and long-life in space. A preliminary design for these actuators is proposed, followed by feasibility analysis of the actuator performance.

Exploration of asteroids and small-bodies can provide valuable insight into the origins of the solar system, into the origins of Earth and the origins of the building blocks of life. However, the low-gravity and unknown surface conditions of asteroids presents a daunting challenge for surface exploration, manipulation and for resource processing. This has resulted in the loss of several landers or shortened missions. Fundamental studies are required to obtain better readings of the material surface properties and physical models of these small bodies. The Asteroid Origins Satellite 1 (AOSAT 1) is a CubeSat centrifuge laboratory that spins at up to 4 rpm to simulate the milligravity conditions of sub 1 km asteroids. Such a laboratory will help to de-risk development and testing of landing and resource processing technology for asteroids. Inside the laboratory are crushed meteorites, the remains of asteroids. The laboratory is equipped with cameras and actuators to perform a series of science experiments to better understand material properties and asteroid surface physics. These results will help to improve our physics models of asteroids. The CubeSat has been designed to be low-cost and contains 3-axis magnetorquers and a single reaction-wheel to induce spin. In our work, we first analyze how the attitude control system will de-tumble the spacecraft after deployment. Further analysis has been conducted to analyze the impact and stability of the attitude control system to shifting mass (crushed meteorites) inside the spacecraft as its spinning in its centrifuge mode. AOSAT 1 will be the first in a series of low-cost CubeSat centrifuges that will be launched setting the stage for a larger, permanent, on-orbit centrifuge laboratory for experiments in planetary science, life sciences and manufacturing.