Studying absorption and scattering of X-ray radiation by interstellar dust grains allows us to access the physical and chemical properties of cosmic grains even in the densest regions of the Galaxy. We aim at characterising the dust silicate population which presents clear absorption features in the energy band covered by the Chandra X-ray Observatory. Through these absorption features, in principle, it is possible to infer the size distribution, composition, and structure of silicate in the interstellar medium. In particular, in this work, we investigate the magnesium and silicon K-edges. By using newly acquired synchrotron measurements, we build X-ray extinction models for fifteen dust candidates. These models, adapted for astrophysical analysis, and implemented in the Spex spectral fitting program, are used to reproduce the dust absorption features observed in the spectrum of the bright low mass X-ray binary GX 3+1 which is used as a background source. With the simultaneous analysis of the two edges we test two different size distributions of dust: one corresponding to the standard Mathis-Rumpl-Nordsieck model and one considering larger grains ($n(a) \propto a_i^{-3.5}$ with $0.005<a_1<0.25$ and $0.05<a_2<0.5$, respectively, with $a$ the grain size). These distributions may be representative of the complex Galactic region towards this source. We find that up to $70\%$ of dust is constituted by amorphous olivine. We discuss the crystallinity of the cosmic dust found along this line of sight. Both magnesium and silicon are highly depleted into dust ($\delta_{Z} = 0.89\ \rm{and}\ 0.94$, respectively) while their total abundance does not depart from solar values.

Water ice is important for the evolution and preservation of life. Identifying the distribution of water ice in debris disks is therefore of great interest in the field of astrobiology. Furthermore, icy dust grains are expected to play important roles throughout the entire planet formation process. However, currently available observations only allow deriving weak conclusions about the existence of water ice in debris disks. We investigate whether it is feasible to detect water ice in typical debris disk systems. We take the following ice destruction mechanisms into account: sublimation of ice, dust production through planetesimal collisions, and photosputtering by UV-bright central stars. We consider icy dust mixture particles with various shapes consisting of amorphous ice, crystalline ice, astrosilicate, and vacuum inclusions. We calculated optical properties of inhomogeneous icy dust mixtures using effective medium theories, that is, Maxwell-Garnett rules. Subsequently, we generated synthetic debris disk observables, such as spectral energy distributions and spatially resolved thermal reemission and scattered light intensity and polarization maps with our code DMS. We find that the prominent $\sim$ 3 $\mu\rm{m}$ and 44 $\mu\rm{m}$ water ice features can be potentially detected in future observations of debris disks with the James Webb Space Telescope and the Space Infrared telescope for Cosmology and Astrophysics. We show that the sublimation of ice, collisions between planetesimals, and photosputtering caused by UV sources clearly affect the observational appearance of debris disk systems. In addition, highly porous ice tends to produce highly polarized radiation at around 3 $\mu\rm{m}$. Finally, the location of the ice survival line is determined by various dust properties such as a fractional ratio of ice versus dust, physical states of ice, and the porosity of icy grains.

The composition and properties of interstellar silicate dust are not well understood. In X-rays, interstellar dust can be studied in detail by making use of the fine structure features in the Si K-edge. The features in the Si K-edge offer a range of possibilities to study silicon-bearing dust, such as investigating the crystallinity, abundance, and the chemical composition along a given line of sight. We present newly acquired laboratory measurements of the silicon K-edge of several silicate-compounds that complement our measurements from our earlier pilot study. The resulting dust extinction profiles serve as templates for the interstellar extinction that we observe. The extinction profiles were used to model the interstellar dust in the dense environments of the Galaxy. The laboratory measurements, taken at the Soleil synchrotron facility in Paris, were adapted for astrophysical data analysis and implemented in the SPEX spectral fitting program. The models were used to fit the spectra of nine low-mass X-ray binaries located in the Galactic center neighborhood in order to determine the dust properties along those lines of sight. Most lines of sight can be fit well by amorphous olivine. We also established upper limits on the amount of crystalline material that the modeling allows. We obtained values of the total silicon abundance, silicon dust abundance, and depletion along each of the sightlines. We find a possible gradient of $0.06\pm0.02$ dex/kpc for the total silicon abundance versus the Galactocentric distance. We do not find a relation between the depletion and the extinction along the line of sight.

Two different silicate/water ice mixtures representing laboratory analogues of interstellar and circumstellar icy grains were produced in the laboratory. For the first time, optical constants, the real and imaginary parts of the complex refractive index, of such silicate/water ice mixtures were experimentally determined in the mid-infrared spectral region at low temperatures. In addition, optical constants of pure water ice and pure silicates were derived in the laboratory. Two sets of constants were compared, namely, measured constants calculated from the transmission spectra of silicate/water ice samples and effective constants calculated from the optical constants of pure silicates and pure water ice samples using different mixing rules (effective medium approaches). Differences between measured and effective constants show that a mixing (averaging) of optical constants of water ice and silicates for the determination of the optical properties of silicate/ice mixtures can lead to incorrect results. Also, it is shown that a part of water ice molecules is trapped in/on silicate grains and does not desorb up to 200 K. Our unique data are just in time with respect to the new challenging space mission, James Webb Space Telescope, which will be able to bring novel detailed information on interstellar and circumstellar grains, and suitable laboratory data are extremely important for the decoding of astronomical spectra.

The chemical and physical properties of interstellar dust in the densest regions of the Galaxy are still not well understood. X-rays provide a powerful probe since they can penetrate gas and dust over a wide range of column densities (up to $10^{24}\ \rm{cm}^{-2}$). The interaction (scattering and absorption) with the medium imprints spectral signatures that reflect the individual atoms which constitute the gas, molecule, or solid. In this work we investigate the ability of high resolution X-ray spectroscopy to probe the properties of cosmic grains containing iron. Although iron is heavily depleted into interstellar dust, the nature of the Fe-bearing grains is still largely uncertain. In our analysis we use iron K-edge synchrotron data of minerals likely present in the ISM dust taken at the European Synchrotron Radiation Facility. We explore the prospects of determining the chemical composition and the size of astrophysical dust in the Galactic centre and in molecular clouds with future X-ray missions. The energy resolution and the effective area of the present X-ray telescopes are not sufficient to detect and study the Fe K-edge, even for bright X-ray sources. From the analysis of the extinction cross sections of our dust models implemented in the spectral fitting program SPEX, the Fe K-edge is promising for investigating both the chemistry and the size distribution of the interstellar dust. We find that the chemical composition regulates the X-ray absorption fine structures in the post edge region, whereas the scattering feature in the pre-edge is sensitive to the mean grain size. Finally, we note that the Fe K-edge is insensitive to other dust properties, such as the porosity and the geometry of the dust.

Recent interferometric surveys of nearby main-sequence stars show a faint but significant near-infrared excess in roughly two dozen systems, i.$\,$e. around $10\,\%$ to $30\,\%$ of stars surveyed. This excess is attributed to dust located in the immediate vicinity of the star, the origin of which is highly debated. We used previously published interferometric observations to constrain the properties and distribution of this hot dust. Considering both scattered radiation and thermal reemission, we modelled the observed excess in nine of these systems. We find that grains have to be sufficiently absorbing to be consistent with the observed excess, while dielectric grains with pure silicate compositions fail to reproduce the observations. The dust should be located within $\sim\,0.01-1\,au$ from the star depending on its luminosity. Furthermore, we find a significant trend for the disc radius to increase with the stellar luminosity. The dust grains are determined to be below $0.2-0.5\,\mu\textrm{m}$, but above $0.02-0.15\,\mu\textrm{m}$ in radius. The dust masses amount to $(0.2-3.5)\times10^{-9}\,M_\oplus$. The near-infrared excess is probably dominated by thermal reemission, though a contribution of scattered light up to $35\,\%$ cannot be completely excluded. The polarisation degree predicted by our models is always below $5\,\%$, and for grains smaller than $\sim0.2\,\mu\textrm{m}$ even below $1\,\%$. We also modelled the observed near-infrared excess of another ten systems with poorer data in the mid-infrared. The basic results for these systems appear qualitatively similar, yet the constraints on the dust location and the grain sizes are weaker.

We study the absorption and scattering of X-ray radiation by interstellar dust particles, which allows us to access the physical and chemical properties of dust. The interstellar dust composition is not well understood, especially on the densest sight lines of the Galactic Plane. X-rays provide a powerful tool in this study. We present newly acquired laboratory measurements of silicate compounds taken at the Soleil synchrotron facility in Paris using the Lucia beamline. The dust absorption profiles resulting from this campaign were used in this pilot study to model the absorption by interstellar dust along the line of sight of the low-mass X-ray binary (LMXB) GX 5-1. The measured laboratory cross-sections were adapted for astrophysical data analysis and the resulting extinction profiles of the Si K-edge were implemented in the SPEX spectral fitting program. We derive the properties of the interstellar dust along the line of sight by fitting the Si K-edge seen in absorption in the spectrum of GX 5-1. We measured the hydrogen column density towards GX 5-1 to be $3.40\pm0.1\times10^{22} \rm cm^{-2}$. The best fit of the silicon edge in the spectrum of GX 5-1 is obtained by a mixture of olivine and pyroxene. In this study, our modeling is limited to Si absorption by silicates with different Mg:Fe ratios. We obtained an abundance of silicon in dust of $4.0\pm0.3\times10^{-5}$ per H atom and a lower limit for total abundance, considering both gas and dust, of $>4.4\times10^{-5}$ per H atom, which leads to a gas to dust ratio of >0.22. Furthermore, an enhanced scattering feature in the Si K-edge may suggest the presence of large particles along the line of sight.

The optical properties of ice in the far infrared are important for models of protoplanetary and debris disks. In this report we derive a new set of data for the absorption (represented by the imaginary part of the refractive index $\kappa$) of crystalline water ice in this spectral range, including a detailed inspection of the temperature dependence, which had not been done in such detail before. We measured the transmission of three ice layers with different thicknesses at temperatures $\vartheta = 10...250$K and present data at wavelengths $\lambda=80...625$ microns. We found a change in the spectral dependence of $\kappa$ at a wavelength of $175 \pm 6$ microns. At shorter wavelengths, $\kappa$ exhibits a constant flat slope and no significant temperature dependence. Long-ward of that wavelength, the slope gets steeper and has a clear, approximately linear temperature dependence. This change in the behaviour is probably caused by a characteristic absorption band of water ice. The measured data were fitted by a power-law model that analytically describes the absorption behaviour at an arbitrary temperature. This model can readily be applied to any object of interest, for instance a protoplanetary or a debris disk. To illustrate how the model works, we simulated the spectral energy distribution (SED) of the resolved, large debris disk around the nearby solar-type star HD 207129. Replacing our ice model by another, commonly used data set for water ice results in a different SED slope at longer wavelengths. This leads to changes in the characteristic model parameters of the disk, such as the inferred particle size distribution, and affects the interpretation of the underlying collisional physics of the disk.

(abridged) Infrared excesses associated with debris disk host stars detected so far peak at wavelengths around ~100{\mu}m or shorter. However, six out of 31 excess sources in the Herschel OTKP DUNES have been seen to show significant - and in some cases extended - excess emission at 160{\mu}m, which is larger than the 100{\mu}m excess. This excess emission has been suggested to stem from debris disks colder than those known previously. Using several methods, we re-consider whether some or even all of the candidates may be associated with unrelated galactic or extragalactic emission and conclude that it is highly unlikely that none of the candidates represents a true circumstellar disk. For true disks, both the dust temperatures inferred from the SEDs and the disk radii estimated from the images suggest that the dust is nearly as cold as a blackbody. This requires the grains to be larger than ~100{\mu}m, regardless of their material composition. To explain the dearth of small grains, we explore several conceivable scenarios: transport-dominated disks, disks of low dynamical excitation, and disks of unstirred primordial macroscopic grains. Our qualitative analysis and collisional simulations rule out the first two of these scenarios, but show the feasibility of the third one. We show that such disks can survive for gigayears, largely preserving the primordial size distribution. They should be composed of macroscopic solids larger than millimeters, but smaller than kilometers in size. Thus planetesimal formation, at least in the outer regions of the systems, has stopped before "cometary" or "asteroidal" sizes were reached.

Debris discs are a consequence of the planet formation process and constitute the fingerprints of planetesimal systems. Their solar system's counterparts are the asteroid and Edgeworth-Kuiper belts. The DUNES survey aims at detecting extra-solar analogues to the Edgeworth-Kuiper belt around solar-type stars, putting in this way the solar system into context. The survey allows us to address some questions related to the prevalence and properties of planetesimal systems. We used {\it Herschel}/PACS to observe a sample of nearby FGK stars. Data at 100 and 160 $\mu$m were obtained, complemented in some cases with observations at 70 $\mu$m, and at 250, 350 and 500 $\mu$m using SPIRE. The observing strategy was to integrate as deep as possible at 100 $\mu$m to detect the stellar photosphere. Debris discs have been detected at a fractional luminosity level down to several times that of the Edgeworth-Kuiper belt. The incidence rate of discs around the DUNES stars is increased from a rate of $\sim$ 12.1% $\pm$ 5% before \emph{Herschel} to $\sim$ 20.2% $\pm$ 2%. A significant fraction ($\sim$ 52%) of the discs are resolved, which represents an enormous step ahead from the previously known resolved discs. Some stars are associated with faint far-IR excesses attributed to a new class of cold discs. Although it cannot be excluded that these excesses are produced by coincidental alignment of background galaxies, statistical arguments suggest that at least some of them are true debris discs. Some discs display peculiar SEDs with spectral indexes in the 70-160$\mu$m range steeper than the Rayleigh-Jeans one. An analysis of the debris disc parameters suggests that a decrease might exist of the mean black body radius from the F-type to the K-type stars. In addition, a weak trend is suggested for a correlation of disc sizes and an anticorrelation of disc temperatures with the stellar age.

Many cosmic dust species, among them refractory oxides, form at temperatures higher than 300 K. Nevertheless, most astrophysical studies are based on the room-temperature optical constants of solids, such as corundum and spinel. A more realistic approach is needed for these materials, especially in the context of modeling late-type stars. We aimed at deriving sets of optical constants of selected, astrophysically relevant oxide dust species with high melting points. A high-temperature-high-pressure-cell and a Fourier-transform spectrometer were used to measure reflectance spectra of polished samples. For corundum (alpha-Al$_2$O$_3$), spinel (MgAl$_2$O$_4$), and alpha-quartz (SiO$_2$), temperature-dependent optical constants were measured from 300 K up to more than 900 K. Small particle spectra were also calculated from these data. All three examined oxides show a significant temperature dependence of their mid-IR bands. For the case of corundum, we find that the 13$\mu$m emission feature - seen in the IR spectra of many AGB stars - can very well be assigned to this mineral species. The best fit of the feature is achieved with oblate corundum grains at mean temperatures around 550 K. Spinel remains a viable carrier of the 13$\mu$m feature as well, but only for T < 300 K and nearly spherical grain shapes. Under such circumstances, spinel grains may also account for the 31.8$\mu$m band that is frequently seen in sources of the 13$\mu$m feature and which has not yet been identified with certainty.

The broad 30 \mu m feature in carbon stars is commonly attributed to MgS dust particles. However, reproducing the 30 \mu m feature with homogeneous MgS grains would require much more sulfur relative to the solar abundance. Direct gas-phase condensation of MgS occurs at a low efficiency. Precipitation of MgS on SiC precursor grains provides a more efficient formation mechanism, such that the assumption of homogeneous MgS grains may not be correct. Using a Monte Carlo-based radiative transfer code, we aim to model the 30 \mu m feature of the extreme carbon star LL Peg with MgS dust particles. We find that for LL Peg this modeling is insensitive to the unknown MgS optical properties at \lambda < 10 \mu m. When MgS is allowed to be in thermal contact with amorphous carbon and SiC, the amount of MgS required to reproduce the strength of 30 \mu m feature agrees with the solar abundance of sulfur, thereby resolving the reported MgS mass problem. We conclude that MgS is a valid candidate to be the carrier of the 30 \mu m feature when it is part of a composite grain population that has optical properties representative of an ensemble of particle shapes.

(Abridged) Debris disks trace remnant reservoirs of leftover planetesimals in planetary systems. A handful of "warm" debris disks have been discovered in the last years, where emission in excess starts in the mid-infrared. An interesting subset within these warm debris disks are those where emission features are detected in mid-IR spectra, which points towards the presence of warm micron-sized dust grains. Given the ages of the host stars, the presence of these grains is puzzling, and questions their origin and survival in time. This study focuses on determining the mineralogy of the dust around 7 debris disks with evidence for warm dust, based on Spitzer/IRS spectroscopic data, in order to provide new insights into the origin of the dust grains. We present a new radiative transfer code dedicated to SED modeling of optically thin disks. We make use of this code on the SEDs of seven warm debris disks, in combination with recent laboratory experiments on dust optical properties. We find that most, if not all, debris disks in our sample are experiencing a transient phase, suggesting a production of small dust grains on relatively short timescales. From a mineralogical point of view, we find that enstatite grains have small abundances compared to crystalline olivine grains. The main result of our study is that we find evidences for Fe-rich crystalline olivine grains (Fe / [Mg + Fe] ~ 0.2) for several debris disks. This finding contrasts with studies of gas-rich protoplanetary disks. The presence of Fe-rich olivine grains, and the overall differences between the mineralogy of dust in Class II disks compared to debris disks suggest that the transient crystalline dust is of a new generation. We discuss possible crystallization routes to explain our results, and comment on the mechanisms that may be responsible for the production of small dust grains.

Solid state spectroscopy continues to be an important source of information on the mineralogical composition and physical properties of dust grains both in space and on planetary surfaces. With only a few exceptions, artificially produced or natural terrestrial analog materials, rather than 'real' cosmic dust grains, are the subject of solid state astrophysics. The Jena laboratory has provided a large number of data sets characterizing the UV, optical and infrared properties of such cosmic dust analogs. The present paper highlights recent developments and results achieved in this context, focussing on 'non-standard conditions' such as very low temperatures, very high temperatures and very long wavelengths.

The dust in protoplanetary disks is influenced by a lot of different processes. Besides others, heating processes are the most important ones: they change not only the physical and chemical properties of dust particles, but also their emission spectra. In order to compare observed infrared spectra of young stellar systems with laboratory data of hot (up to 700{\deg}C) circumstellar dust analogues, we investigate materials, which are important constituents of dust in protoplanetary disks. We calculated the optical constants by means of a simple Lorentzian oscillator fit and apply them to simulations of small-particle emission spectra in order to compare our results with real astronomical spectra of AGB-stars and protoplanetary disks.

Several astrophysically relevant solid oxides and silicates have extremely small opacities in the visual and near-infrared in their pure forms. Datasets for the opacities and for the imaginary part k of their complex indices of refraction are hardly available in these wavelength ranges. We aimed at determining k for spinel, rutile, anatase, and olivine, especially in the near-infrared region. Our measurements were made with impurity-containing, natural, and synthetic stardust analogs. Two experimental methods were used: preparing small sections of natural minerals and synthesizing melt droplets under the electric arc furnace. In both cases, the aborption properties of the samples were measured by transmission spectroscopy. For spinel (MgAl2O4), anatase, rutile (both TiO2), and olivine ((Mg,Fe)2SiO4), the optical constants have been extended to the visual and near-infrared. We highlight that the individual values of k and the absorption cross section depend strongly on the content in transition metals like iron. Based on our measurements, we infer that k values below 10^(-5) are very rare in natural minerals including stardust grains, if they occur at all. Data for k and the absorption cross section are important for various physical properties of stardust grains such as temperature and radiation pressure. With increasing absorption cross section due to impurities, the equilibrium temperature of small grains in circumstellar shells increases as well. We discuss why and to what extent this is the case.

We present the first far-IR observations of the solar-type stars delta Pav, HR 8501, 51 Peg and zeta^2 Ret, taken within the context of the DUNES Herschel Open Time Key Programme (OTKP). This project uses the PACS and SPIRE instruments with the objective of studying infrared excesses due to exo-Kuiper belts around nearby solar-type stars. The observed 100 um fluxes from delta Pav, HR 8501, and 51 Peg agree with the predicted photospheric fluxes, excluding debris disks brighter than Ldust/Lstar ~ 5 x 10^-7 (1 sigma level) around those stars. A flattened, disk-like structure with a semi-major axis of ~ 100 AU in size is detected around zeta^2 Ret. The resolved structure suggests the presence of an eccentric dust ring, which we interpret as an exo-Kuiper belt with Ldust/Lstar ~ 10^-5.

Nanometer- and micrometer-sized solid particles play an important role in the evolutionary cycle of stars and interstellar matter. The optical properties of cosmic grains determine the interaction of the radiation field with the solids, thereby regulating the temperature structure and spectral appearance of dusty regions. Radiation pressure on dust grains and their collisions with the gas atoms and molecules can drive powerful winds. The analysis of observed spectral features, especially in the infrared wavelength range, provides important information on grain size, composition and structure as well as temperature and spatial distribution of the material. The relevant optical data for interstellar, circumstellar, and protoplanetary grains can be obtained by measurements on cosmic dust analogs in the laboratory or can be calculated from grain models based on optical constants. Both approaches have made progress in the last years, triggered by the need to interpret increasingly detailed high-quality astronomical observations. The statistical theoretical approach, spectroscopic experiments at variable temperature and absorption spectroscopy of aerosol particulates play an important role for the successful application of the data in dust astrophysics.

Mixtures of polycylic aromatic hydrocarbons (PAHs) have been produced by means of laser pyrolysis. The main fraction of the extracted PAHs were primarily medium-sized, up to a maximum size of 38 carbon atoms per molecule. The use of different extraction solvents and subsequent chromatographic fractionation provided mixtures of different size distributions. UV-VIS absorption spectra have been measured at low temperature by matrix isolation spectroscopy and at room temperature with PAHs as film-like deposits on transparent substrates. In accordance with semi-empirical calculations, our findings suggest that large PAHs with sizes around 50 to 60 carbon atoms per molecule could be responsible for the interstellar UV bump at 217.5 nm.

Analysis of thermal dust emission spectra for dust mineralogy and physical grain properties depends on laboratory-measured or calculated comparison spectra. Often, the agreement between these two kinds of spectra is not satisfactory because of the strong influence of the grain morphology on the spectra. We investigate the ability of the statistical light-scattering model with a distribution of form factors (DFF model) to reproduce experimentally measured infrared extinction spectra for particles that are small compared to the wavelength. We take advantage of new experimental spectra measured for free particles dispersed in air with accompanying information on the grain morphology. For the calculations, we used DFFs that were derived for aggregates of spherical grains, as well as for compact grain shapes corresponding to Gaussian random spheres. Irregular particle shapes require a DFF similar to that of a Gaussian random sphere with sigma=0.3, whereas roundish grain shapes are best fitted with that of a fractal aggregate of a fractal dimension 2.4-1.8. In addition we used a fitting algorithm to obtain the best-fit DFFs for the various laboratory samples. In this way we can independently derive information on the shape of the grains from their infrared spectra. For anisotropic materials, different DFFs are needed for the different crystallographic axes. This is due to a theoretical problem, which is inherent to all models that are simply averaging the contributions of the crystallographic directions.

To trace the source of the unique 13, 19.5, and 28 $\mu$m emission features in the spectra of oxygen-rich circumstellar shells around AGB stars, we have compared dust extinction spectra obtained by aerosol measurements. We have measured the extinction spectra for 19 oxide powder samples of eight different types, such as Ti-compounds (TiO, TiO$_2$, Ti$_2$O$_3$, Ti$_3$O$_5$, Al$_2$TiO$_5$, CaTiO$_3$), $\alpha$-, $\gamma$-, $\chi$-$\delta$-$\kappa$-Al$_2$O$_3$, and MgAl$_2$O$_4$ in the infrared region (10 - 50 $\mu$m) paying special attention to the morphological (size, shape, and agglomeration) effects and the differences in crystal structure. Anatase (TiO$_2$) particles with rounded edges are the possible 13, 19.5 and 28 $\mu$m band carriers as the main contributor in the spectra of AGB stars, and spherically shaped nano-sized spinel and Al$_2$TiO$_5$ dust grains are possibly associated with the anatase, enhancing the prominence of the 13 $\mu$m feature and providing additional features at 28 $\mu$m. The extinction data sets obtained by the aerosol and CsI pellet measurements have been made available for public use at http://elbe.astro.uni-jena.de

Carbonaceous grains represent a major component of cosmic dust. In order to understand their formation pathways, they have been prepared in the laboratory by gas-phase condensation reactions such as laser pyrolysis and laser ablation. Our studies demonstrate that the temperature in the condensation zone determines the formation pathway of carbonaceous particles. At temperatures lower than 1700 K, the condensation by-products are mainly polycyclic aromatic hydrocarbons (PAHs), that are also the precursors or building blocks for the condensing soot grains. The low-temperature condensates contain PAH mixtures that are mainly composed of volatile 3-5 ring systems. At condensation temperatures higher than 3500 K, fullerene-like carbon grains and fullerene compounds are formed. Fullerene fragments or complete fullerenes equip the nucleating particles. Fullerenes can be identified as soluble components. Consequently, condensation products in cool and hot astrophysical environments such as cool and hot AGB stars or Wolf Rayet stars should be different and should have distinct spectral properties.

Carbon solids are ubiquitous material in the interstellar space. However, the formation pathway of carbonaceous matter in astrophysical environments as well as in terrestrial gas-phase condensation reactions is not yet understood. Laser ablation of graphite in different quenching gas atmospheres such as pure He, He/H$_2$, and He/H$_2$O at varying pressures is used to synthesize very small, fullerene-like carbon nanoparticles. The particles are characterized by very small diameters between 1 and 4 nm and a disturbed onion-like structure. The soot particles extracted from the condensation zone obviously represent a very early stage of particle condensation. The spectral properties have been measured from the far-ultraviolet (FUV) ($\lambda$=120 nm) to the mid-infrared (MIR) ($\lambda$=15 ~$\mu$m). The seed-like soot particles show strong absorption bands in the 3.4 ~$\mu$m range. The profile and the intensity pattern of the 3.4 ~$\mu$m band of the diffuse interstellar medium can be well reproduced by the measured 3.4 ~$\mu$m profile of the condensed particles, however, all the carbon which is left to form solids is needed to fit the intensity of the interstellar bands. In contrast to the assumption that onion-like soot particles could be the carrier of the interstellar ultraviolet (UV) bump, our very small onion-like carbon nanoparticles do not show distinct UV bands due to ($\pi-\pi$*) transitions.

Hydrous silicates occur in various cosmic environments, and are among the minerals with the most pronounced bands in the far infrared (FIR) spectral region. Given that Herschel and ALMA will open up new possibilities for astronomical FIR and sub-mm spectroscopy, data characterizing the dielectric properties of these materials at long wavelengths are desirable. We aimed at examining the FIR spectra of talc, picrolite, montmorillonite, and chamosite, which belong to four different groups of phyllosilicates. We tabulated positions and band widths of the FIR bands of these minerals depending on the dust temperature. By means of powder transmission spectroscopy, spectra of the examined materials were measured in the wavelength range 25-500 mum at temperatures of 300, 200, 100, and 10 K. Room-temperature measurements yield the following results. For talc, a previously unknown band, centered at 98.5 mum, was found, in addition to bands at 56.5 and 59.5 mum. For montmorillonite, several bands at wavelengths <110 mum were detected, including a band at 105 mum with an FWHM of about 10 mum. Picrolite shows a sharp 77 mum FIR band. Chamosite is characterized by bands in the 72-92 mum range, and a prominent band at 277 mum. At decreasing temperature, most of the bands shift to shorter wavelengths. Examining a potential counterpart of the 105mum band in the spectra of HD 142527 and HD 100546, we find that the broad band in the spectra of these young stars - extending from 85 to 125 mum - cannot be due to montmorillonite or any of the hydrous silicates we studied, since these materials have sharper bands in the FIR wavelength range than previously assumed, especially at low temperatures.

Debris disks around main-sequence stars are believed to derive from planetesimal populations that have accreted at early epochs and survived possible planet formation processes. While debris disks must contain solids in a broad range of sizes - from big planetesimals down to tiny dust grains - debris disk observations are only sensitive to the dust end of the size distribution. Collisional models of debris disks are needed to "climb up" the ladder of the collisional cascade, from dust towards parent bodies, representing the main mass reservoir of the disks. We have used our collisional code to generate five disks around a sun-like star, assuming planetesimal belts at 3, 10, 30, 100, and 200 AU with 10 times the Edgeworth-Kuiper-belt mass density, and to evolve them for 10 Gyr. Along with an appropriate scaling rule, this effectively yields a three-parametric set of reference disks (initial mass, location of planetesimal belt, age). For all the disks, we have generated spectral energy distributions (SEDs), assuming homogeneous spherical astrosilicate dust grains. A comparison between generated and actually observed SEDs yields estimates of planetesimal properties (location, total mass etc.). As a test and a first application of this approach, we have selected five disks around sun-like stars with well-known SEDs. In four cases, we have reproduced the data with a linear combination of two disks from the grid (an "asteroid belt" at 3 AU and an outer "Kuiper belt"); in one case a single, outer component was sufficient. The outer components are compatible with "large Kuiper belts" of 0.2-50 earth masses (in the bodies up to 100 km in size) with radii of 100-200 AU.

Carbonates have repeatedly been discussed as possible carriers of stardust emission bands. However, the band assignments proposed so far were mainly based on room temperature powder transmission spectra of the respective minerals. Since very cold calcite grains have been claimed to be present in protostars and in Planetary Nebulae such as NGC 6302, the changes of their dielectric functions at low temperatures are relevant from an astronomical point of view. We have derived the IR optical constants of calcite and dolomite from reflectance spectra - measured at 300, 200, 100 and 10K - and calculated small particle spectra for different grain shapes, with the following results: i) The absorption efficiency factors both of calcite and dolomite are extremely dependent on the particle shapes. This is due to the high peak values of the optical constants of CaCO3 and CaMg[CO3]2. ii) The far infrared properties of calcite and dolomite depend also very significantly on the temperature. Below 200K, a pronounced sharpening and increase in the band strengths of the FIR resonances occurs. iii) In view of the intrinsic strength and sharpening of the 44 mum band of calcite at 200-100K, the absence of this band -- inferred from Infrared Space Observatory data -- in PNe requires dust temperatures below 45K. iv) Calcite grains at such low temperatures can account for the '92' mum band, while our data rule out dolomite as the carrier of the 60-65 mum band. The optical constants here presented are publicly available in the electronic database http://www.astro.uni-jena.de/Laboratory/OCDB

The profile of the silicate 10 $\mu$m IR band contains important information about the evolutional stage of dust in circumstellar environments and the possible ongoing process of planetesimal formation. In order to extract this information, the observed band profiles are compared with calculated or laboratory-measured absorption cross sections of amorphous and crystalline grains with different sizes and compositions. We present in this study the first laboratory measurements of the 10 $\mu$m band profiles of nonembedded, i.e. free-flying, particles of amorphous and crystalline Mg$_2$SiO$_4$ (with two different particle shapes), amorphous and crystalline MgSiO$_3$, and crystalline olivine. We compare the spectra with those measured on embedded grains and discuss the potential of the new experimental method for comparison with observed spectra, as well as for future studies of agglomeration and surface manipulation of the grains.

Particle shape and aggregation have a strong influence on the spectral profiles of infrared phonon bands of solid dust grains. Calculating these effects is difficult due to the often extreme refractive index values in these bands. In this paper, we use the Discrete Dipole Approximation (DDA) and the T-matrix method to compute the absorption band profiles for simple clusters of touching spherical grains. We invest reasonable amounts of computation time in order to reach high dipole grid resolutions and take high multi-polar orders into account, respectively. The infrared phonon bands of three different refractory materials of astrophysical relevance are considered - Silicon Carbide (SiC), Wustite (FeO) and Silicon Dioxide (SiO2). We demonstrate that even though these materials display a range of material properties and therefore different strengths of the surface resonances, a complete convergence is obtained with none of the approaches. For the DDA, we find a strong dependence of the calculated band profiles on the exact dipole distribution within the aggregates, especially in the vicinity of the contact points between their spherical constituents. By applying a recently developed method to separate the material optical constants from the geometrical parameters in the DDA approach, we are able to demonstrate that the most critical material properties are those where the real part of the refractive index is much smaller than unity.

Particle shape and aggregation have a strong influence on the spectral profiles of infrared phonon bands of solid dust grains. In this paper, we use a discrete dipole approximation, a cluster-of-spheres code following the Gerardy-Ausloos approach and a T-matrix method for calculating IR extinction spectra of aggregates of spherical silicon carbide (SiC) particles. We compare the results obtained with the three different methods and discuss differences in the band profiles.

The spectral energy distribution of quasars shows a sharp steepening of the continuum shortward of ~ 1100 A. The steepening could be a result of dust absorption. We present a dust extinction model which considers crystalline carbon grains and compare it with SMC-like dust extinction consisting of a mixture of silicate grains with graphite or amorphous carbon grains. We show that the sharp break seen in individual quasar spectra of intermediate redshif \~ 1-2 can be reproduced by dust absorption provided the extinction curve consists of nanodiamonds, composed of terrestial cubic diamonds or of diamonds similar to the presolar nanodiamonds found in primitive meteorites.

We explore the possibility that the steepening observed shortward of 1000A in the energy distribution of quasars may result from absorption by dust, being either intrinsic to the quasar environment or intergalactic. We find that a dust extinction curve consisting of nanodiamonds, composed of terrestrial cubic diamonds or with surface impurities as found in carbonaceous chondrite meteorites, such as Allende, is successful in reproducing the sharp break observed. The intergalactic dust model is partially successful in explaining the shape of the composite energy distribution, but must be discarded in the end, as the amount of crystalline dust required is unreasonable and would imply an improbable fine tuning among the dust formation processes. The alternative intrinsic dust model requires a mixture of both cubic diamonds and Allende nanodiamonds and provide a better fit of the UV break. The gas column densities implied are of the order 10^{20} cm^{-2} assuming solar metallicity for carbon and full depletion of carbon into dust. The absorption only occurs in the ultraviolet and is totally negligible in the visible. The minimum dust mass required is of the order ~ 0.003 r_{pc}^{2}M_o, where r_{pc} is the distance in parsec between the dust screen and the continuum source. The intrinsic dust model reproduces the flux {\it rise} observed around 660A in key quasar spectra quite well. We present indirect evidence of a shallow continuum break near 670A (18.5 eV), which would be intrinsic to the quasar continuum.

The origin of the so-called "21 micron" feature which is especially prominent in the spectra of some carbon-rich protoplanetary nebulae (PPNe}) is the matter of a lively debate. A large number of potential band carriers have been presented and discarded within the past decade. The present paper gives an overview of the problems related to the hitherto proposed feature identifications, including the recently suggested candidate carrier silicon carbide. We also discuss the case for spectroscopically promising oxides. SiC is shown to produce a strong resonance band at 20-21 micron if coated by a layer of silicon dioxide. At low temperatures, core-mantle particles composed of SiC and amorphous SiO$_2$ indeed have their strongest spectral signature at a position of 20.1 micron, which coincides with the position of the "21 micron" emission band. The optical constants of another candidate carrier that has been relatively neglected so far -- iron monoxide -- are proven to permit a fairly accurate reproduction of the "21 micron" feature profile as well, especially when low-temperature measurements of the infrared properties of FeO are taken into account. As candidate carrier of the "21 micron" emission band, FeO has the advantage of being stable against further oxidation and reduction only in a narrow range of chemical and physical conditions, coinciding with the fact that the feature, too, is detected in a small group of objects only. However, it is unclear how FeO should form or survive particularly in carbon-rich PPNe.

We have used different spectroscopic techniques to obtain a consistent quantitative absorption spectrum of a sample of meteoritic nano-diamonds in the wavelength range from the vacuum ultraviolet (0.12 $\mu$m) to the far infrared (100 $\mu$m). The nano-diamonds have been isolated by a chemical treatment from the Allende meteorite (Braatz et al.2000). Electron energy loss spectroscopy (EELS) extends the optical measurements to higher energies and allows the derivation of the optical constants (n & k) by Kramers-Kronig analysis. The results can be used to restrain observations and to improve current models of the environment where the nano-diamonds are expected to have formed. We also show that the amount of nano-diamond which can be present in space is higher than previously estimated by Lewis et al. (1989).

We present a database containing information on different aspects of calculation and usage of the optical properties of small non-spherical particles -- cosmic dust analogues. The main parts of the DOP are a review of available methods of the light scattering theory, collection of light scattering codes, special computational tools, a graphic library of the optical properties (efficiencies, albedo, asymmetry factors, etc.), a database of the optical constants for astronomy, a bibliographic database of light scattering works, and links to related Internet resources. The general purpose of the DOP having the address http://www.astro.spbu.ru/DOP is twofold -- to help scientists to apply the light scattering theory in astronomy and to give students and beginners a possibility quickly to get necessary knowledge on the subject.

In this paper we demonstrate that distinguishing between the polytypes of silicon carbide by means of infrared features in small-grain spectra is impossible. Therefore, the infrared spectra of carbon stars, unfortunately, do not provide a means for drawing comparisons between the crystal structures of grains condensed in these environments and found in meteorites. This is proven first by comparing theoretical band profiles calculated for ellipsoidal particles, which show clearly a strong dependence on the axis ratio of the ellipsoids but negligible differences for the two most common polytypes. Second, spectra measured on submicron particle samples in the laboratory do not show any obvious correlation of band position or shape to the polytype. However, we demonstrate by measurements on SiC whiskers that grain shape is able to determine the spectrum completely. A further strong systematic influence on the band profile can be exerted by plasmon-phonon coupling due to conductivity of the SiC material. The latter fact probably is responsible for the confusion in the astronomical literature about spectral properties of SiC grains. We show that, although the conductivity seems to be a common property of many SiC laboratory samples, it is, however, independent of the polytype.

We present basic laboratory infrared data on a large number of SiC particulate samples, which should be of great value for the interpretation of the 11.3 micron feature observed in the spectra of carbon-rich stars. The laboratory spectra show a wide variety of the SiC phonon features in the 10-13 micron wavelength range, both in peak wavelength and band shape. The main parameters determining the band profile are morphological factors as grain size and shape and, in many cases, impurities in the material. We discovered the interesting fact that free charge carriers, generated e.g. by nitrogen doping, are a very common characteristics of many SiC particle samples. These free charge carriers produce very strong plasmon absorption in the near and middle infrared, which may also heavily influence the 10-13 micron feature profile via plasmon-phonon coupling. We also found that there is no systematic dependence of the band profile on the crystal type (alpha- vs. beta-SiC). This is proven both experimentally and by theoretical calculations based on a study of the SiC phonon frequencies. Further, we give optical constants of amorphous SiC. We discuss the implications of the new laboratory results for the interpretation of the spectra of carbon stars.

We present here the first infrared spectra of meteoritic SiC grains. The mid-infrared transmission spectra of meteoritic SiC grains isolated from the Murchison meteorite were measured in the wavelength range 2.5--16.5 micron, in order to make available the optical properties of presolar SiC grains. These grains are most likely stellar condensates with an origin predominately in carbon stars. Measurements were performed on two different extractions of presolar SiC from the Murchison meteorite. The two samples show very different spectral appearance due to different grain size distributions. The spectral feature of the smaller meteoritic SiC grains is a relatively broad absorption band found between the longitudinal and transverse lattice vibration modes around 11.3 micron, supporting the current interpretation about the presence of SiC grains in carbon stars. In contrast to this, the spectral feature of the large (> 5 micron) grains has an extinction minimum around 10 micron. The obtained spectra are compared with commercially available SiC grains and the differences are discussed. This comparison shows that the crystal structure (e.g., beta-SiC versus alpha-SiC) of SiC grains plays a minor role on the optical signature of SiC grains compared to e.g. grain size.