Normalized to: Mura, A.
[1]
oai:arXiv.org:2004.00072 [pdf] - 2095078
Jupiter's Equatorial Plumes and Hot Spots: Spectral Mapping from
Gemini/TEXES and Juno/MWR
Fletcher, L. N.;
Orton, G. S.;
Greathouse, T. K.;
Rogers, J. H.;
Zhang, Z.;
Oyafuso, F. A.;
Eichstädt, G.;
Melin, H.;
Li, C.;
Levin, S. M.;
Bolton, S.;
Janssen, M.;
Mettig, H-J.;
Grassi, D.;
Mura, A.;
Adriani, A.
Submitted: 2020-03-31, last modified: 2020-05-14
We present multi-wavelength measurements of the thermal, chemical, and cloud
contrasts associated with the visibly dark formations (also known as 5-$\mu$m
hot spots) and intervening bright plumes on the boundary between Jupiter's
Equatorial Zone (EZ) and North Equatorial Belt (NEB). Observations made by the
TEXES 5-20 $\mu$m spectrometer at the Gemini North Telescope in March 2017
reveal the upper-tropospheric properties of 12 hot spots, which are directly
compared to measurements by Juno using the Microwave Radiometer (MWR), JIRAM at
5 $\mu$m, and JunoCam visible images. MWR and thermal-infrared spectroscopic
results are consistent near 0.7 bar. Mid-infrared-derived aerosol opacity is
consistent with that inferred from visible-albedo and 5-$\mu$m opacity maps.
Aerosol contrasts, the defining characteristics of the cloudy plumes and
aerosol-depleted hot spots, are not a good proxy for microwave brightness. The
hot spots are neither uniformly warmer nor ammonia-depleted compared to their
surroundings at $p<1$ bar. At 0.7 bar, the microwave brightness at the edges of
hot spots is comparable to other features within the NEB. Conversely, hot spots
are brighter at 1.5 bar, signifying either warm temperatures and/or depleted
NH$_3$ at depth. Temperatures and ammonia are spatially variable within the hot
spots, so the precise location of the observations matters to their
interpretation. Reflective plumes sometimes have enhanced NH$_3$, cold
temperatures, and elevated aerosol opacity, but each plume appears different.
Neither plumes nor hot spots had microwave signatures in channels sensing
$p>10$ bars, suggesting that the hot-spot/plume wave is a relatively shallow
feature.
[2]
oai:arXiv.org:2002.08759 [pdf] - 2064512
The BepiColombo SERENA/ELENA Instrument On-Ground Testing with the ELENA
Special Check Out Equipment (SCOE)
Lazzarotto, Francesco;
Vertolli, Nello;
Maschietti, Dario;
Di Lellis, Andrea Maria;
Ryno, Jouni;
Camozzi, Fabio;
Orsini, Stefano;
Milillo, Anna;
Mura, Alessandro;
De Angelis, Elisabetta;
Rispoli, Rosanna;
Colasanti, Luca;
Selci, Stefano;
D'Alessandro, Marco;
Leoni, Roberto;
Mattioli, Francesco
Submitted: 2020-02-19
The neutral particles sensor ELENA (Emitted Low Energy Neutral Atoms) for the
ESA/JAXA BepiColombo mission to Mercury (in the SERENA instrument suite) is
devoted to measure low energetic neutral atoms. The main goal of the experiment
is measuring the sputtering emission from planetary surfaces, from E=20eV up to
E=5keV, within 1D (2 deg. x 76 deg. ). ELENA original project had also a
particle discrimination system based on Time-of-Flight (TOF) of particles
through the shutter on the Micro Channel Plates detector (MCP), it has been
withdrawn from the flight model due to design and development problems. The
ELENA SCOE is the configuration/testing system of ELENA, it allows to command
operations and to set up configuration parameters on the instrument and to
monitor the incoming data. The TC/TM simulation/encoding/decoding software is
developed respecting the CCSDS/ECSS standards implemented by ESA, and it's
SCOS2000 compatible. TC generation, HK data monitoring and basic science data
analysis are operated by the SERENA EGSE, developed by the Finnish
Meteorological Institute (FMI), Helsinki, Finland. The data stream outcoming
from the EGSE is then preprocessed from TM to user readable formats: FITS and
then ASCII csv tables with metadata collected in a detached XML file, called
label. This task is performed using the PacketLib, ProcessorLib, and DISCoS
(PPD) framework and is going to be used as the first level prototype of the
BepiColombo Science Ground Segment processing pipeline, based in ESAC, Madrid,
Spain and implemented using the PDS4 data format.
[3]
oai:arXiv.org:1804.06179 [pdf] - 1666960
The contribution of the ARIEL space mission to the study of planetary
formation
Turrini, D.;
Miguel, Y.;
Zingales, T.;
Piccialli, A.;
Helled, R.;
Vazan, A.;
Oliva, F.;
Sindoni, G.;
Panić, O.;
Leconte, J.;
Min, M.;
Pirani, S.;
Selsis, F.;
Foresto, V. Coudé du;
Mura, A.;
Wolkenberg, P.
Submitted: 2018-04-17
The study of extrasolar planets and of the Solar System provides
complementary pieces of the mosaic represented by the process of planetary
formation. Exoplanets are essential to fully grasp the huge diversity of
outcomes that planetary formation and the subsequent evolution of the planetary
systems can produce. The orbital and basic physical data we currently possess
for the bulk of the exoplanetary population, however, do not provide enough
information to break the intrinsic degeneracy of their histories, as different
evolutionary tracks can result in the same final configurations. The lessons
learned from the Solar System indicate us that the solution to this problem
lies in the information contained in the composition of planets. The goal of
the Atmospheric Remote-Sensing Infrared Exoplanet Large-survey (ARIEL), one of
the three candidates as ESA M4 space mission, is to observe a large and
diversified population of transiting planets around a range of host star types
to collect information on their atmospheric composition. ARIEL will focus on
warm and hot planets to take advantage of their well-mixed atmospheres, which
should show minimal condensation and sequestration of high-Z materials and thus
reveal their bulk composition across all main cosmochemical elements. In this
work we will review the most outstanding open questions concerning the way
planets form and the mechanisms that contribute to create habitable
environments that the compositional information gathered by ARIEL will allow to
tackle
[4]
oai:arXiv.org:1405.7279 [pdf] - 1209786
The Influence of Space Environment on the Evolution of Mercury
Submitted: 2014-05-28
Mercury, due to its close location to the Sun, is surrounded by an
environment whose conditions may be considered as "extreme" in the entire Solar
System. Both solar wind and radiation are stronger with respect to other Solar
System bodies, so that their interactions with the planet cause high emission
of material from its surface. Moreover, the meteoritic precipitation plays a
significant role in surface emission processes. This emitted material is
partially lost in space. Although under the present conditions the surface
particles loss rate does not seem to be able to produce significant erosion of
the planetary mass and volume, the long-term effects over billions of years
should be carefully considered to properly understand the evolution of the
planet. In the early stages, under even more extreme conditions, some of these
processes were much more effective in removing material from the planet's
surface. This study attempts to provide a rough estimation of the material loss
rate as a function of time, in order to evaluate whether and how this
environmental effect can be applied to understand the Hermean surface
evolution. We show that the most potentially effective Sun-induced erosion
process in early times is a combination of ion sputtering, photon stimulated
desorption and enhanced diffusion, which could have caused the loss of a
surface layer down to a depth of 20 m, as well as a relevant Na depletion.
[5]
oai:arXiv.org:1209.4768 [pdf] - 566216
Dynamical Evolution of Sodium Anysotropies in the Exosphere of Mercury
Submitted: 2012-09-21
The exosphere, the tenuous collisionless cloud of gas surrounding Mercury is
still a poorly known object because it is the result of many various
interactions between the surface, the interplanetary medium (Solar wind,
photons and meteoroids), the planetary and the interplanetary magnetic fields.
Many ground-based observations have allowed the detection of intense and
variable sodium emissions at global and local spatial scales, the latter being
mostly concentrated in the polarmid latitude regions. These regions are indeed
the preferred location of solar wind precipitation on the surface of the
planet. In the present paper, by using high resolution Na observations obtained
at the Canary Islands with the THEMIS solar telescope, we analyze the
variability of the sodium exosphere on time-scale of 1 hour and investigate the
possible mechanisms that could explain the exospheric sodium emission
distribution and its dynamics. Our interpretation relates the observed sodium
asymmetries to the combined effects of plasma and photons impacts onto the
Mercury's surface and of sodium diffusion through the upper layer of the
surface. The comparison between data and simulations seems to evidence that,
similarly to what occurs at the Earth, both the magnetic reconnection regimes
of pulsed or quasi-steady reconnection could occur on Mercury, and be
responsible for the observed Na short term variations. In addition to this, a
progressive broadening of the peak regions together with an increase of the
equatorial region seem to corroborate the idea of the role of photon stimulated
desorption, in association with ion sputtering and with global sodium migration
around Mercury as the cause of the observed evolution of the Na exosphere.
[6]
oai:arXiv.org:1009.5500 [pdf] - 1040892
Constraints on the exosphere of CoRoT-7b
Guenther, E. W.;
Cabrera, J.;
Erikson, A.;
Fridlund, M.;
Lammer, H.;
Mura, A.;
Rauer, H.;
Schneider, J.;
Tulej, M.;
von Paris, Ph.;
Wurz, P.
Submitted: 2010-09-28, last modified: 2010-10-13
CONTEXT: The small radius and high density of CoRoT-7b implies that this
transiting planet belongs to a differen t species than all transiting planets
previously found. Current models suggest that this is the first transiting
rocky planet found outside the solar system. Given that the planet orbits a
solar-like star at a distance of on ly 4.5 R*, it is expected that material
released from its surface may then form an exosphere. AIMS: We constrai n the
properties of the exosphere by observing the planet in- and out-of-transit.
Detecting of the exosphere of CoRoT-7b would for the first time allow to study
the material originating in the surface of a rocky extrasolar planet. We scan
the entire optical spectrum for any lines originating from the planet, focusing
particularly on spectral lines such as those detected in Mercury, and Io in our
solar system. METHODS: Since lines originating in the exosphere are expected to
be narrow, we observed CoRoT-7b at high resolution with UVES on the VLT. By
subtracting the two spectra from each other, we search for emission and
absorption lines originating in the exosph ere of CoRoT-7b. RESULTS: In the
first step, we focus on Ca I, Ca II, Na, because these lines have been detected
in Mercury. Since the signal-to-noise ratio (S/N) of the spectra is as high as
300, we derive firm upper limits for the flux-range between 1.6E-18 and 3.2E-18
Wm**-2. For CaO, we find an upper limit of E-17 Wm**-2. We also search for
emission lines originating in the plasma torus fed by volcanic activity and
derive upper limits for these lines. In the whole spectrum we finally try to
identify other lines originating in the planet.
[7]
oai:arXiv.org:0911.4602 [pdf] - 1018488
Neutral particle release from Europa's surface
Submitted: 2009-11-24, last modified: 2010-06-04
In this paper, we look at space weathering processes on the icy surface of
Jupiter's moon Europa. The heavy energetic ions of the Jovian plasma (H+, O+,
S+, C+) can erode the surface of Europa via ion sputtering (IS), ejecting up to
1000 H2O molecules per ion. UV Photons impinging the Europa's surface can also
result in neutral atom release via photon-stimulated desorption (PSD) and
chemical change (photolysis). In this work, we study the efficiency of the IS
and PSD processes for ejecting water molecules, simulating the resulting
neutral H2O density. We also estimate the contribution to the total neutral
atom release by the Ion Backscattering (IBS) process. Moreover, we estimate the
possibility of detecting the sputtered high energy atoms, in order to
distinguish the action of the IS process from other surface release mechanisms.
Our main results are: 1) The most significant sputtered-particle flux and the
largest contribution to the neutral H2O-density come from the incident S+ ions;
2) The H2O density produced via PSD is lower than that due to sputtering by
~1.5 orders of magnitude; 3) In the energy range below 1 keV, the IBS can be
considered negligible for the production of neutrals, whereas in the higher
energy range it becomes the dominant neutral emission mechanism; 4) the total
sputtering rate for Europa is 2.0\cdot 1027 H2O s-1; 5) the fraction of
escaping H2O via IS is 22% of the total sputtered population, while the escape
fraction for H2O produced by PSD is 30% of the total PSD population. Since the
PSD exosphere is lower than the IS one, the major agent for Europa's surface
erosion is IS on both the non-illuminated and illuminated side. Lastly, the
exospheric neutral density, estimated from the Galileo electron density
measurements appears to be higher than that calculated for H2O alone; this
favours the scenario of the presence of O2 produced by radiolysis and
photolysis.