We introduce an observational tool based on visibility nulls in optical spectro-interferometry fringe data to probe the structure of stellar atmospheres. In a preliminary demonstration, we use both Navy Precision Optical Interferometer (NPOI) data and stellar atmosphere models to show that this tool can be used, for example, to investigate limb darkening. Using bootstrapping with either multiple linked baselines or multiple wavelengths in optical and infrared spectro-interferometric observations of stars makes it possible to measure the spatial frequency $u_0$ at which the real part of the fringe visibility ${\rm Re}(V)$ vanishes. That spatial frequency is determined by $u_0 = B_\perp/\lambda_0$, where $B_\perp$ is the projected baseline length, and $\lambda_0$ is the wavelength at which the null is observed. Since $B_\perp$ changes with the Earth's rotation, $\lambda_0$ also changes. If $u_0$ is constant with wavelength, $\lambda_0$ varies in direct proportion to $B_\perp$. Any departure from that proportionality indicates that the brightness distribution across the stellar disk varies with wavelength via variations in limb darkening, in the angular size of the disk, or both. In this paper, we introduce the use of variations of $u_0$ with $\lambda$ as a means of probing the structure of stellar atmospheres. Using the equivalent uniform disk diameter $\theta_{\rm UD, 0}(\lambda_0)$, given by $\theta_{\rm UD, 0} = 1.22/u_0(\lambda_0)$, as a convenient and intuitive parameterization of $u_0(\lambda_0)$, we demonstrate this concept by using model atmospheres to calculate the brightness distribution for $\nu$ Ophiuchi and predict $\theta_{\rm UD, 0}(\lambda_0)$, and then comparing the predictions to coherently averaged data from observations taken with the NPOI.

The Planet Formation Imager (PFI, www.planetformationimager.org) is a next-generation infrared interferometer array with the primary goal of imaging the active phases of planet formation in nearby star forming regions. PFI will be sensitive to warm dust emission using mid-infrared capabilities made possible by precise fringe tracking in the near-infrared. An L/M band combiner will be especially sensitive to thermal emission from young exoplanets (and their disks) with a high spectral resolution mode to probe the kinematics of CO and H2O gas. In this paper, we give an overview of the main science goals of PFI, define a baseline PFI architecture that can achieve those goals, point at remaining technical challenges, and suggest activities today that will help make the Planet Formation Imager facility a reality.

The Planet Formation Imager (PFI) is a future kilometric-baseline infrared interferometer to image the complex physical processes of planet formation. Technologies that could be used to transport starlight to a central beam-combining laboratory in PFI include free-space propagation in air or vacuum, and optical fibres. This paper addresses the design and cost issues associated with free-space propagation in vacuum pipes. The signal losses due to diffraction over long differential paths are evaluated, and conceptual beam transport designs employing pupil management to ameliorate these losses are presented and discussed.

The Planet Formation Imager (PFI) Project has formed a Technical Working Group (TWG) to explore possible facility architectures to meet the primary PFI science goal of imaging planet formation in situ in nearby star- forming regions. The goals of being sensitive to dust emission on solar system scales and resolving the Hill-sphere around forming giant planets can best be accomplished through sub-milliarcsecond imaging in the thermal infrared. Exploiting the 8-13 micron atmospheric window, a ground-based long-baseline interferometer with approximately 20 apertures including 10km baselines will have the necessary resolution to image structure down 0.1 milliarcseconds (0.014 AU) for T Tauri disks in Taurus. Even with large telescopes, this array will not have the sensitivity to directly track fringes in the mid-infrared for our prime targets and a fringe tracking system will be necessary in the near-infrared. While a heterodyne architecture using modern mid-IR laser comb technology remains a competitive option (especially for the intriguing 24 and 40{\mu}m atmospheric windows), the prioritization of 3-5{\mu}m observations of CO/H2O vibrotational levels by the PFI-Science Working Group (SWG) pushes the TWG to require vacuum pipe beam transport with potentially cooled optics. We present here a preliminary study of simulated L- and N-band PFI observations of a realistic 4-planet disk simulation, finding 21x2.5m PFI can easily detect the accreting protoplanets in both L and N-band but can see non-accreting planets only in L band. (abridged -- see PDF for full abstract)

The Planet Formation Imager (PFI) project aims to image the period of planet assembly directly, resolving structures as small as a giant planet's Hill sphere. These images will be required in order to determine the key mechanisms for planet formation at the time when processes of grain growth, protoplanet assembly, magnetic fields, disk/planet dynamical interactions and complex radiative transfer all interact - making some planetary systems habitable and others inhospitable. We will present the overall vision for the PFI concept, focusing on the key technologies and requirements that are needed to achieve the science goals. Based on these key requirements, we will define a cost envelope range for the design and highlight where the largest uncertainties lie at this conceptual stage.

The Stellar Imager mission concept is a space-based UV/Optical interferometer designed to resolve surface magnetic activity and subsurface structure and flows of a population of Sun-like stars, in order to accelerate the development and validation of a predictive dynamo model for the Sun and enable accurate long-term forecasting of solar/stellar magnetic activity.

Recovering images from optical interferometric observations is one of the major challenges in the field. Unlike the case of observations at radio wavelengths, in the optical the atmospheric turbulence changes the phases on a very short time scale, which results in corrupted phase measurements. In order to overcome these limitations, several groups developed image reconstruction techniques based only on squared visibility and closure phase information, which are unaffected by atmospheric turbulence. We present the results of two techniques used by our group, which employed coherently integrated data from the Navy Prototype Optical Interferometer. Based on these techniques we were able to recover complex visibilities for several sources and image them using standard radio imaging software. We describe these techniques, the corrections applied to the data, present the images of a few sources, and discuss the implications of these results.

In this paper we use coherently integrated visibilities (see separate paper in these proceedings, Jorgensen et al. 2008) to measure the properties of binary stars. We use only the phase of the complex visibility and not the amplitude. The reason for this is that amplitudes suffer from the calibration effect (the same for coherent and incoherent averages) and thus effectively provide lower accuracy measurements. We demonstrate that the baseline phase alone can be used to measure the separation, orientation and brightness ratio of a binary star, as a function of wavelength.

In this paper we will discuss the current status of coherent integration with the Navy Prototype Optical Interferometer (NPOI) (Armstrong et al. 2008). Coherent integration relies on being able to phase reference interferometric measurements, which in turn relies on making measurements at multiple wavelengths. We first discuss the generalized group-delay approach, then the meaning of the resulting complex visibilities and then demonstrate how coherent integration can be used to perform very precision measurement of stellar properties. For example, we demonstrate how we can measure the diameter of a star to a precision of one part in 350, and measure properties of binary stars. The complex phase is particularly attractive as a data product because it is not biased in the same way as visibility amplitudes.

We present the results of an experiment to image the interacting binary star beta Lyrae with data from the Navy Prototype Optical Interferometer (NPOI), using a differential phase technique to correct for the effects of the instrument and atmosphere on the interferometer phases. We take advantage of the fact that the visual primary of beta Lyrae and the visibility calibrator we used are both nearly unresolved and nearly centrally symmetric, and consequently have interferometric phases near zero. We used this property to detect and correct for the effects of the instrument and atmosphere on the phases of beta Lyrae and to obtain differential phases in the channel containing the Halpha emission line. Combining the Halpha-channel phases with information about the line strength, we recovered complex visibilities and imaged the Halpha emission using standard radio interferometry methods. We find that the results from our differential phase technique are consistent with those obtained from a more-standard analysis using squared visibilities (V^2's). Our images show the position of the Halpha emitting regions relative to the continuum photocenter as a function of orbital phase and indicate that the major axis of the orbit is oriented along p.a.=248.8+/-1.7 deg. The orbit is smaller than previously predicted, a discrepancy that can be alleviated if we assume that the system is at a larger distance from us, or that the contribution of the stellar continuum to the Halpha channel is larger than estimated. Finally, we also detected a differential phase signal in the channels containing HeI emission lines at 587.6 and 706.5nm, with orbital behavior different from that of the Halpha, indicating that it originates from a different part of this interacting system.

We have designed and constructed a ``dispersed Fourier Transform Spectrometer'' (dFTS), consisting of a conventional FTS followed by a grating spectrometer. By combining these two devices, we negate a substantial fraction of the sensitivity disadvantage of a conventional FTS for high resolution, broadband, optical spectroscopy, while preserving many of the advantages inherent to interferometric spectrometers. In addition, we have implemented a simple and inexpensive laser metrology system, which enables very precise calibration of the interferometer wavelength scale. The fusion of interferometric and dispersive technologies with a laser metrology system yields an instrument well-suited to stellar spectroscopy, velocimetry, and extrasolar planet detection, which is competitive with existing high-resolution, high accuracy stellar spectrometers. In this paper, we describe the design of our prototype dFTS, explain the algorithm we use to efficiently reconstruct a broadband spectrum from a sequence of narrowband interferograms, and present initial observations and resulting velocimetry of stellar targets.

Vega, the second brightest star in the northern hemisphere, serves as a primary spectral type standard. While its spectrum is dominated by broad hydrogen lines, the narrower lines of the heavy elements suggested slow to moderate rotation, giving confidence that the ground-based calibration of its visibile spectrum could be safely extrapolated into the ultraviolet and near-infrared (through atmosphere models), where it also serves as the primary photometric calibrator. But there have been problems: the star is too bright compared to its peers and it has unusually shaped absorption line profiles, leading some to suggest that it is a distorted, rapidly rotating star seen pole-on. Here we report optical interferometric observations of Vega which detect the asymmetric brightness distribution of the bright, slightly offset polar axis of a star rotating at 93% of breakup speed. In addition to explaining the unusual brightness and line shape pecularities, this result leads to the prediction of an excess of near-infrared emission compared to the visible, in agreement with observations. The large temperature differences predicted across its surface call into question composition determinations, adding uncertainty to Vega's age and opening the possibility that its debris disk could be substantially older than previously thought.

We report successful fitting of a Roche model, with a surface temperature gradient following the von Zeipel gravity darkening law, to observations of Altair made with the Navy Prototype Optical Interferometer. We confirm the claim by Ohishi, Nordgren, & Hutter that Altair displays an asymmetric intensity distribution due to rotation, the first such detection in an isolated star. Instrumental effects due to the high visible flux of this first magnitude star appear to be the limiting factor in the accuracy of this fit, which nevertheless indicates that Altair is rotating at 0.90+/-0.02 of its breakup (angular) velocity. Our results are consistent with the apparent oblateness found by van Belle et al. and show that the true oblateness is significantly larger owing to an inclination of the rotational axis of ~64 degrees to the line of sight. Of particular interest, we conclude that instead of being substantially evolved as indicated by its classification, A7 VI-V, Altair is only barely off the ZAMS and represents a good example of the difficulties rotation can introduce in the interpretation of this part of the HR diagram.

We present direct measurements of the limb-darkened intensity profiles of the late-type giant stars HR5299, HR7635, and HR8621 obtained with the Navy Prototype Optical Interferometer (NPOI) at the Lowell Observatory. A triangle of baselines with lengths of 18.9 m, 22.2 m, and 37.5 m was used. We utilized squared visibility amplitudes beyond the first minimum, as well as triple amplitudes and phases in up to 10 spectral channels covering a wavelength range of ~650 nm to ~850 nm. We find that our data can best be described by featureless symmetric limb-darkened disk models while uniform disk and fully darkened disk models can be rejected. We derive high-precision angular limb-darkened diameters for the three stars of 7.44 mas +/- 0.11 mas, 6.18 mas +/- 0.07 mas, and 6.94 mas +/- 0.12 mas, respectively. Using the HIPPARCOS parallaxes, we determine linear limb-darkened radii of 114 R$_\odot \pm $13 R$_\odot$, 56 R$_\odot \pm $4 R$_\odot$, and 98 R$_\odot \pm $9 R$_\odot$, respectively. We compare our data to a grid of Kurucz stellar model atmospheres, with them derive the effective temperatures and surface gravities without additional information, and find agreement with independent estimates derived from empirical calibrations and bolometric fluxes. This confirms the consistency of model predictions and direct observations of the limb-darkening effect.

We have measured the diameters of the Cepheid variables delta Cephei (18 nights) and eta Aquilae (11 nights) with the Navy Prototype Optical Interferometer. The primary results of these observations are the mean angular diameters <theta(LD)> of these Cepheids: 1.520 +/- 0.014 milliseconds of arc (mas) for delta Cep and 1.69 +/- 0.04 mas for eta Aql. We also report limb-darkened diameters for the check stars in this program: for beta Lac, theta(LD) = 1.909 +/- 0.011 mas, and for 12 Aql, theta(LD) = 2.418 +/- 0.010 mas. When combined with radius estimates from period-radius relations in the literature, the Cepheid angular diameters suggest distances slightly smaller than, but still consistent with, the Hipparcos distances. Pulsations are weakly detected at a level of about 1.5 sigma to 2 sigma for both Cepheids.