Surface brightness-colour relations (SBCRs) are used to derive the stellar angular diameters from photometric observations. They have various astrophysical applications, such as the distance determination of eclipsing binaries or the determination of exoplanet parameters. However, strong discrepancies between the SBCRs still exist in the literature, in particular for early and late-type stars. We aim to calibrate new SBCRs as a function of the spectral type and the luminosity class of the stars. Our goal is also to apply homogeneous criteria to the selection of the reference stars and in view of compiling an exhaustive and up-to-date list of interferometric late-type targets. We implemented criteria to select measurements in the JMMC Measured Diameters Catalog (JMDC). We then applied additional criteria on the photometric measurements used to build the SBCRs, together with stellar characteristics diagnostics. We built SBCRs for F5/K7-II/III, F5/K7-IV/V, M-II/III and M-V stars, with respective RMS of $\sigma_{F_{V}} = 0.0022$ mag, $\sigma_{F_{V}} = 0.0044$ mag, $\sigma_{F_{V}} = 0.0046$ mag, and $\sigma_{F_{V}} = 0.0038$ mag. This results in a precision on the angular diameter of 1.0\%, 2.0\%, 2.1\%, and 1.7\%, respectively. These relations cover a large $V-K$ colour range of magnitude, from 1 to 7.5. Our work demonstrates that SBCRs are significantly dependent on the spectral type and the luminosity class of the star. Through a new set of interferometric measurements, we demonstrate the critical importance of the selection criteria proposed for the calibration of SBCR. Finally, using the Gaia photometry for our samples, we obtained (G-K) SBCRs with a precision on the angular diameter between 1.1\% and 2.4\%.

The surface brightness - color relationship (SBCR) is a poweful tool for determining the angular diameter of stars from photometry. It was for instance used to derive the distance of eclipsing binaries in the Large Magellanic Cloud (LMC), which led to its distance determination with an accuracy of 1%. We calibrate the SBCR for red giant stars in the 2.1 < V-K < 2.5 color range using homogeneous VEGA/CHARA interferometric data secured in the visible domain, and compare it to the relation based on infrared interferometric observations, which were used to derive the distance to the LMC. Observations of eight G-K giants were obtained with the VEGA/CHARA instrument. The derived limb-darkened angular diameters were combined with a homogeneous set of infrared magnitudes in order to constrain the SBCR. The average precision we obtain on the limb-darkened angular diameters of the eight stars in our sample is 2.4%. For the four stars in common observed by both VEGA/CHARA and PIONIER/VLTI, we find a 1 sigma agreement for the angular diameters. The SBCR we obtain in the visible has a dispersion of 0.04 magnitude and is consistent with the one derived in the infrared (0.018 magnitude). The consistency of the infrared and visible angular diameters and SBCR reinforces the result of 1% precision and accuracy recently achieved on the distance of the LMC using the eclipsing-binary technique. It also indicates that it is possible to combine interferometric observations at different wavelengths when the SBCR is calibrated.

Context. Asymptotic giant branch stars are cool luminous evolved stars that are well observable across the Galaxy and populating Gaia data. They have complex stellar surface dynamics Aims. On the AGB star CL Lac, it has been shown that the convection-related variability accounts for a substantial part of the Gaia DR2 parallax error. We observed this star with the MIRC-X beam combiner installed at the CHARA interferometer to detect the presence of stellar surface inhomogeneities. Methods. We performed the reconstruction of aperture synthesis images from the interferometric observations at different wavelengths. Then, we used 3D radiative hydrodynamics simulations of stellar convection with CO5BOLD and the post-processing radiative transfer code Optim3D to compute intensity maps in the spectral channels of MIRC-X observations. Then, we determined the stellar radius and compared the 3D synthetic maps to the reconstructed ones focusing on matching the intensity contrast, the morphology of stellar surface structures, and the photocentre position at two different spectral channels, 1.52 and 1.70 micron, simultaneously. Results. We measured the apparent diameter of CL Lac at two wavelengths and recovered the radius using a Gaia parallax. In addition to this, the reconstructed images are characterised by the presence of a brighter area that largely affects the position of the photocentre. The comparison with 3D simulation shows good agreement with the observations both in terms of contrast and surface structure morphology, meaning that our model is adequate for explaining the observed inhomogenities. Conclusions. This work confirms the presence of convection-related surface structures on an AGB star of Gaia DR2. Our result will help us to take a step forward in exploiting Gaia measurement uncertainties to extract the fundamental properties of AGB stars using appropriate RHD simulations.

We present a detailed visible and near-IR spectro-interferometric analysis of the Be-shell star $\omicron$ Aquarii from quasi-contemporaneous CHARA/VEGA and VLTI/AMBER observations. We measured the stellar radius of $\omicron$ Aquarii as 4.0 $\pm$ 0.3 $\mathrm{R_{\odot}}$. We constrained the disk geometry and kinematics using a kinematic model and a MCMC fitting procedure. The disk sizes in H$\alpha$ and Br$\gamma$ were found to be similar, at $\sim$10-12 $\mathrm{D_{\star}}$, which is uncommon since most results for Be stars show a larger extension in H$\alpha$ than in Br$\gamma$. We found that the inclination angle $i$ derived from H$\alpha$ is significantly lower ($\sim$15 deg) than the one derived from Br$\gamma$. The disk kinematics were found to be near to the Keplerian rotation in Br$\gamma$, but not in H$\alpha$. After analyzing all our data using a grid of HDUST models (BeAtlas), we found a common physical description for the disk in both lines: $\Sigma_{0}$ = 0.12 g cm\textsuperscript{-2} and $m$ = 3.0. The stellar rotational rate was found to be very close ($\sim$96\%) to the critical value. Our analysis of multi-epoch H$\alpha$ profiles and imaging polarimetry indicates that the disk has been stable for at least 20 years. Compared to Br$\gamma$, the data in H$\alpha$ shows a substantially different picture that cannot fully be understood using the current physical models of Be star disks. $\omicron$ Aquarii presents a stable disk, but the measured $m$ is lower than the standard value in the VDD model for steady-state. Such long-term stability can be understood in terms of the high rotational rate for this star, the rate being a main source for the mass injection in the disk. Our results on the stellar rotation and disk stability are consistent with results in the literature showing that late-type Be stars are more likely to be fast rotators and have stable disks.

The harvest of exoplanet discoveries has opened the area of exoplanet characterisation. But this cannot be achieved without a careful analysis of the host star parameters. The system of HD219134 hosts two transiting exoplanets and at least two additional non-transiting exoplanets. We used the VEGA/CHARA interferometer to measure the angular diameter of HD219134, leading to a stellar radius of $R_{\star}=0.726\pm0.014 R_{\odot}$. We also derived the stellar density from the transits light curves ($\rho_{\star}=1.82\pm0.19 \rho_{\odot}$), which finally gives a direct estimate of the mass ($M_{\star}=0.696\pm0.078 M_{\odot}$) with a correlation of 0.46 between $R_{\star}$ and $M_{\star}$. This new mass is smaller than that derived from the C2kSMO stellar evolutionary model, which provides a mass range of 0.755$-$0.810 ($\pm 0.040$) $M_{\odot}$. This allows us to infer the mass, radius and density of the two transiting exoplanets of the system. We then use an inference model to obtain the internal parameters of these two transiting exoplanets. Moreover, we find that planet $b$ and $c$ have smaller radii than previously estimated ($1.500\pm0.057$ and $1.415\pm0.049 R_{\oplus}$, respectively); this clearly puts these planets out of the gap in the exoplanetary radii distribution and validates their super-Earth nature. Planet $b$ is more massive than planet $c$, but possibly less dense. We investigate whether this could be caused by partial melting of the mantle and find that tidal heating due to non-zero eccentricity of planet $b$ may be powerful enough. The system of HD219134 constitutes a very valuable benchmark for both stellar physics and exoplanetary science. The direct determination of the stellar density, radius and mass should be more extensively applied to provide accurate exoplanets properties and calibrate stellar models.

HD113337 is a Main-Sequence F6V field star more massive than the Sun, hosting one (possibly two) radial velocity (RV) giant planet(s) and a cold debris disk (marked by an infrared excess). We used the VEGA interferometer on the CHARA array to measure HD113337 angular diameter, and derived its linear radius using the Gaia parallax. We computed the bolometric flux to derive its effective temperature and luminosity, and we estimated its mass and age using evolutionary tracks. We used Herschel images to partially resolve the outer disk, and high-contrast images of HD113337 with the LBTI to probe the 10-80 au separation range. Finally, we combined the deduced contrast maps with previous RV of the star using the MESS2 software to bring upper mass limits on possible companions at all separations up to 80 au, taking advantage of the constraints on the age and inclination (brought by the fundamental parameter analysis and the disk imaging, respectively). We derive a limb-darkened angular diameter of 0.386 $\pm$ 0.009 mas that converts into a linear radius of 1.50 $\pm$ 0.04 solar radius. The fundamental parameter analysis leads to an effective temperature of 6774 $\pm$ 125 K, and to two possible age solutions: one young within 14-21 Myr and one old within 0.8-1.7 Gyr. We partially resolve the known outer debris disk and model its emission. Our best solution corresponds to a radius of 85 $\pm$ 20 au, an extension of 30 $\pm$ 20 au and an inclination within 10-30 degrees for the outer disk. The combination of imaging contrast limits, published RV, and our new age and inclination solutions leads to a first possible estimation of the true masses of the planetary companions: $\sim 7_{-2}^{+4}$ Jupiter masses for HD113337 b (confirmed companion), and $\sim 16_{-3}^{+10}$ Jupiter masses for HD113337 c (candidate). We also constrain possible additional companions at larger separations.

In this paper we present the most promising science cases for a new generation visible instrument on the VLTI and the conceptual idea for the instrumental configuration. We also present a statistical study of the potential targets that may be accessible for the different classes of objects and for the required spectral resolutions.

The dynamical structure of the atmosphere of Cepheids has been well studied in the optical. Several authors have found very interesting spectral features in the J band, but little data have been secured beyond 1.6 um. However, such observations can probe different radial velocities and line asymmetry regimes, and are able to provide crucial insights into stellar physics. Our goal was to investigate the infrared line-forming region in the K-band domain, and its impact on the projection factor and the k-term of Cepheids. We secured CRIRES observations for the long-period Cepheid l Car, with a focus on the unblended spectral line NaI2208.969 nm. We measured the corresponding radial velocities (by using the first moment method) and the line asymmetries (by using the bi-Gaussian method). These quantities are compared to the HARPS visible spectra we previously obtained on l Car. The optical and infrared radial velocity curves show the same amplitude (only about 3% of difference), with a slight radial velocity shift of about 0.5 +/- 0.3 km s^-1 between the two curves. Around the minimum radius (phase ~ 0.9) the visible radial velocity curve is found in advance compared to the infrared one (phase lag), which is consistent with an infrared line forming higher in the atmosphere (compared to the visible line) and with a compression wave moving from the bottom to the top of the atmosphere during maximum outward velocity. The asymmetry of the K-band line is also found to be significantly different from that of the optical line.

Mass exchange and mass loss in close binaries can significantly affect their evolution, but a complete self-consistent theory of these processes is still to be developed. Processes such as radiative shielding due to a~hot-spot region, or a~hydrodynamical interaction of different parts of the gas stream have been studied previously. In order to test the respective predictions, it is necessary to carry out detailed observations of binaries undergoing the largescale mass exchange, especially for those that are in the rapid transfer phase. \bla is an archetype of such a system, having a long and rich observational history. Our goal for this first study is to quantitatively estimate the geometry and physical properties of the optically thick components, namely the Roche-lobe filling mass-losing star, and the accretion disk surrounding the mass-gaining star of \blae. A series of continuum visible and NIR spectro-interferometric observations by the NPOI, CHARA/MIRC and VEGA instruments covering the whole orbit of \bla acquired during a~two-week campaign in 2013 were complemented with \ubvr\ photometric observations acquired during a three-year monitoring of the system. We included NUV and FUV observations from OAO~A-2, IUE, and Voyager satellites.

The G-type star GJ504A is known to host a 3 to 35 MJup companion whose temperature, mass, and projected separation all contribute to make it a test case for the planet formation theories and for atmospheric models of giant planets and light brown dwarfs. We collected data from the CHARA interferometer, SOPHIE spectrograph, and VLT/SPHERE high contrast imager to revisit the properties of the system. We measure a radius of 1.35+/- 0.04Rsun for GJ504A which yields isochronal ages of 21+/-2Myr or 4.0+/-1.8Gyr for the system and line-of-sight stellar rotation axis inclination of $162.4_{-4.3}^{+3.8}$ degrees or $18.6_{-3.8}^{+4.3}$ degrees. We re-detect the companion in the Y2, Y3, J3, H2, and K1 dual band SPHERE images. The complete 1-4 $\mu$m SED shape of GJ504b is best reproduced by T8-T9.5 objects with intermediate ages ($\leq1.5$Gyr), and/or unusual dusty atmospheres and/or super-solar metallicities. All six atmospheric models used yield $\mathrm{T_{eff}=550 \pm 50}$K for GJ504b and point toward a low surface gravity (3.5-4.0 dex). The accuracy on the metallicity value is limited by model-to-model systematics. It is not degenerate with the C/O ratio. We derive $\mathrm{log\:L/L_{\odot}=-6.15\pm0.15}$ dex for the companion compatible with masses of $\mathrm{M=1.3^{+0.6}_{-0.3}M_{Jup}}$ and $\mathrm{M=23^{+10}_{-9} M_{Jup}}$ for the young and old age ranges, respectively. The semi-major axis (sma) is above 27.8 au and the eccentricity lower than 0.55. The posterior on GJ~504b's orbital inclination suggests a misalignment with GJ~504A rotation axis. We combine the radial velocity and multi-epoch imaging data to exclude additional objects (90\% prob.) more massive than 2.5 and 30 $\mathrm{M_{Jup}}$ with sma in the range 0.01-80 au for the young and old system ages, respectively. The companion is in the envelope of the population of planets synthetized with our core-accretion model.

The "Square Kilometre Array" (SKA) is a large international radio telescope project characterised, as suggested by its name, by a total collecting area of approximately one square kilometre, and consisting of several interferometric arrays to observe at metric and centimetric wavelengths. The deployment of the SKA will take place in two sites, in South Africa and Australia, and in two successive phases. From its Phase 1, the SKA will be one of the most formidable scientific machines ever deployed by mankind, and by far the most impressive in terms of data throughput and required computing power. With the participation of almost 200 authors from forty research institutes and six private companies, the publication of this French SKA white paper illustrates the strong involvement in the SKA project of the French astronomical community and of a rapidly growing number of major scientific and technological players in the fields of Big Data, high performance computing, energy production and storage, as well as system integration.

Large stellar surveys of the Milky Way require validation with reference to a set of "benchmark" stars whose fundamental properties are well-determined. For metal-poor benchmark stars, disagreement between spectroscopic and interferometric effective temperatures has called the reliability of the temperature scale into question. We present new interferometric measurements of three metal-poor benchmark stars, HD 140283, HD 122563, and HD 103095, from which we determine their effective temperatures. The angular sizes of all the stars were determined from observations with the PAVO beam combiner at visible wavelengths at the CHARA array, with additional observations of HD 103095 made with the VEGA instrument, also at the CHARA array. Together with photometrically derived bolometric fluxes, the angular diameters give a direct measurement of the effective temperature. For HD 140283 we find {\theta}_LD = 0.324+/-0.005 mas, Teff = 5787+/-48 K; for HD 122563, {\theta}_LD = 0.926+/-0.011 mas, Teff = 4636+/-37 K; and for HD 103095 {\theta}_LD = 0.595+/-0.007 mas, Teff = 5140+/-49 K. Our temperatures for HD 140283 and HD 103095 are hotter than the previous interferometric measurements by 253 K and 322 K, respectively. We find good agreement between our temperatures and recent spectroscopic and photometric estimates. We conclude some previous interferometric measurements have been affected by systematic uncertainties larger than their quoted errors.

Stellar rotation is a key in our understanding of both mass-loss and evolution of intermediate and massive stars. It can lead to anisotropic mass-loss in the form of radiative wind or an excretion disk. We wished to spatially resolve the photosphere and gaseous environment of 51 Oph, a peculiar star with a very high vsin(i) of 267km s$^{-1}$ and an evolutionary status that remains unsettled. It has been classified by different authors as a Herbig, a $\beta$ Pic, or a classical Be star. We used the VEGA visible beam combiner installed on the CHARA array that reaches a submilliarcsecond resolution. Observation were centered on the H$\alpha$ emission line. We derived, for the first time, the extension and flattening of 51 Oph photosphere. We found a major axis of $\theta_{{\mathrm{eq}}}$=8.08$\pm$0.70$R_\odot$ and a minor axis of $\theta_{{\mathrm{pol}}}$=5.66$\pm$0.23$R_\odot$ . This high photosphere distortion shows that the star is rotating close to its critical velocity. Finally, using spectro-interferometric measurements in the H$ \alpha$ line, we constrained the circumstellar environment geometry and kinematics and showed that the emission is produced in a 5.2$\pm$2R$_{*}$ disk in Keplerian rotation. From the visible point of view, 51 Oph presents all the features of a classical Be star: near critical-rotation and double-peaked H$\alpha $ line in emission produced in a gaseous disk in Keplerian rotation. However, this does not explain the presence of dust as seen in the mid-infrared and millimeter spectra, and the evolutionary status of 51 Oph remains unsettled.

High spatial resolution is the key for the understanding various astrophysical phenomena. But even with the future E-ELT, single dish instruments are limited to a spatial resolution of about 4 mas in the visible. For the closest objects within our Galaxy most of the stellar photosphere remains smaller than 1 mas. With the success of long baseline interferometry these limitations were soom overcome. Today low and high resolution interferometric instruments on the VLTI and CHARA offer an immense range of astrophysical studies. Combining more telescopes and moving to visible wavelengths broadens the science cases even more. With the idea of developing strong science cases for a future visible interferometer, we organized a science group around the following topics: pre-main sequence and main sequence stars, fundamental parameters, asteroseismology and classical pulsating stars, evolved stars, massive stars, active galactic nuclei (AGNs) and imaging techniques. A meeting was organized on the 15th and 16th of January, 2015 in Nice with the support of the Action Specific in Haute Resolution Angulaire (ASHRA), the Programme National en Physique Stellaire (PNPS), the Lagrange Laboratory and the Observatoire de la Cote d'Azur, in order to present these cases and to discuss them further for future visible interferometers. This White Paper presents the outcome of the exchanges. This book is dedicated to the memory of our colleague Olivier Chesneau who passed away at the age of 41.

Context. Red giant branch (RGB) stars are very bright objects in galaxies and are often used as standard candles. Interferometry is the ideal tool to characterize the dynamics and morphology of their atmospheres. Aims. We aim at precisely characterising the surface dynamics of a sample of RGB stars. Methods. We obtained interferometric observations for three RGB stars with the MIRC instrument mounted at the CHARA interfer- ometer. We looked for asymmetries on the stellar surfaces using limb-darkening models. Results. We measured the apparent diameters of HD197989 (Epsilon Cyg) = 4.61+-0.02 mas, HD189276 (HR7633) = 2.95+-0.01 mas, and HD161096 (Beta Oph) = 4.43+-0.01 mas. We detected departures from the centrosymmetric case for all three stars with the tendency of a greater effect for lower logg of the sample. We explored the causes of this signal and conclude that a possible explanation to the interferometric signal is the convection-related and/or the magnetic-related surface activity. However, it is necessary to monitor these stars with new observations, possibly coupled with spectroscopy, in order to firmly establish the cause.

The projection factor p is the key quantity used in the Baade-Wesselink (BW) method for distance determination; it converts radial velocities into pulsation velocities. Several methods are used to determine p, such as geometrical and hydrodynamical models or the inverse BW approach when the distance is known. We analyze new HARPS-N spectra of delta Cep to measure its cycle-averaged atmospheric velocity gradient in order to better constrain the projection factor. We first apply the inverse BW method to derive p directly from observations. The projection factor can be divided into three subconcepts: (1) a geometrical effect (p0); (2) the velocity gradient within the atmosphere (fgrad); and (3) the relative motion of the optical pulsating photosphere with respect to the corresponding mass elements (fo-g). We then measure the fgrad value of delta Cep for the first time. When the HARPS-N mean cross-correlated line-profiles are fitted with a Gaussian profile, the projection factor is pcc-g = 1.239 +/- 0.034(stat) +/- 0.023(syst). When we consider the different amplitudes of the radial velocity curves that are associated with 17 selected spectral lines, we measure projection factors ranging from 1.273 to 1.329. We find a relation between fgrad and the line depth measured when the Cepheid is at minimum radius. This relation is consistent with that obtained from our best hydrodynamical model of delta Cep and with our projection factor decomposition. Using the observational values of p and fgrad found for the 17 spectral lines, we derive a semi-theoretical value of fo-g. We alternatively obtain fo-g = 0.975+/-0.002 or 1.006+/-0.002 assuming models using radiative transfer in plane-parallel or spherically symmetric geometries, respectively. The new HARPS-N observations of delta Cep are consistent with our decomposition of the projection factor.

This work presents CHARA/VEGA H$\alpha$ spectro-interferometry (R ~ 6000, and $\lambda$/2B ~ 1 mas) of HD 179218 and HD 141569, doubling the sample of Herbig Ae/Be (HAeBe) stars for which this type of observations is available so far. The observed H$\alpha$ emission is spatially unresolved, indicating that the size of the H$\alpha$ emitting region is smaller than ~ 0.21 and 0.12 au for HD 179218 and HD 141529 (~ 15 and 16 R*, respectively). This is smaller than for the two other HAeBes previously observed with the same instrumentation. Two different scenarios have been explored in order to explain the compact line emitting regions. A hot, several thousand K, blackbody disc is consistent with the observations of HD 179218 and HD 141569. Magnetospheric accretion (MA) is able to reproduce the bulk of the H$\alpha$ emission shown by HD 179218, confirming previous estimates from MA shock modelling with a mass accretion rate of 10^-8 Msun/yr, and an inclination to the line of sight between 30 and 50 degr. The H$\alpha$ profile of HD 141569 cannot be fitted from MA due to the high rotational velocity of this object. Putting the CHARA sample together, a variety of scenarios is required to explain the H$\alpha$ emission in HAeBe stars -compact or extended, discs, accretion, and winds-, in agreement with previous Br$\gamma$ spectro-interferometric observations.

The B-W method is used to determine the distance of Cepheids and consists in combining the angular size variations of the star, as derived from infrared surface-brightness relations or interferometry, with its linear size variation, as deduced from visible spectroscopy using the projection factor. While many Cepheids have been intensively observed by infrared beam combiners, only a few have been observed in the visible. This paper is part of a project to observe Cepheids in the visible with interferometry as a counterpart to infrared observations already in hand. Observations of delta Cep itself were secured with the VEGA/CHARA instrument over the full pulsation cycle of the star. These visible interferometric data are consistent in first approximation with a quasi-hydrostatic model of pulsation surrounded by a static circumstellar environment (CSE) with a size of theta_cse=8.9 +/- 3.0 mas and a relative flux contribution of f_cse=0.07+/-0.01. A model of visible nebula (a background source filling the field of view of the interferometer) with the same relative flux contribution is also consistent with our data at small spatial frequencies. However, in both cases, we find discrepancies in the squared visibilities at high spatial frequencies (maximum 2sigma) with two different regimes over the pulsation cycle of the star, phi=0.0-0.8 and phi=0.8-1.0. We provide several hypotheses to explain these discrepancies, but more observations and theoretical investigations are necessary before a firm conclusion can be drawn. For the first time we have been able to detect in the visible domain a resolved structure around delta~Cep. We have also shown that a simple model cannot explain the observations, and more work will be necessary in the future, both on observations and modelling.

Accurate stellar parameters are needed in numerous domains of astrophysics. The position of stars on the H-R diagram is an important indication of their structure and evolution, and it helps improve stellar models. Furthermore, the age and mass of stars hosting planets are required elements for studying exoplanetary systems. We aim at determining accurate parameters of a set of 18 bright exoplanet host and potential host stars from interferometric measurements, photometry, and stellar models. Using the VEGA/CHARA interferometer, we measured the angular diameters of 18 stars, ten of which host exoplanets. We combined them with their distances to estimate their radii. We used photometry to derive their bolometric flux and, then, their effective temperature and luminosity to place them on the H-R diagram. We then used the PARSEC models to derive their best fit ages and masses, with error bars derived from MC calculations. Our interferometric measurements lead to an average of 1.9% uncertainty on angular diameters and 3% on stellar radii. There is good agreement between measured and indirect estimations of angular diameters (from SED fitting or SB relations) for MS stars, but not as good for more evolved stars. For each star, we provide a likelihood map in the mass-age plane; typically, two distinct sets of solutions appear (an old and a young age). The errors on the ages and masses that we provide account for the metallicity uncertainties, which are often neglected by other works. From measurements of its radius and density, we also provide the mass of 55 Cnc independently of models. From the stellar masses, we provide new estimates of semi-major axes and minimum masses of exoplanets with reliable uncertainties. We also derive the radius, density, and mass of 55 Cnc e, a super-Earth that transits its stellar host. Our exoplanetary parameters reflect the known population of exoplanets.

A classical nova occurs when material accreting onto the surface of a white dwarf in a close binary system ignites in a thermonuclear runaway. Complex structures observed in the ejecta at late stages could result from interactions with the companion during the common envelope phase. Alternatively, the explosion could be intrinsically bipolar, resulting from a localized ignition on the surface of the white dwarf or as a consequence of rotational distortion. Studying the structure of novae during the earliest phases is challenging because of the high spatial resolution needed to measure their small sizes. Here we report near-infrared interferometric measurements of the angular size of Nova Delphini 2013, starting from one day after the explosion and continuing with extensive time coverage during the first 43 days. Changes in the apparent expansion rate can be explained by an explosion model consisting of an optically thick core surrounded by a diffuse envelope. The optical depth of the ejected material changes as it expands. We detect an ellipticity in the light distribution, suggesting a prolate or bipolar structure that develops as early as the second day. Combining the angular expansion rate with radial velocity measurements, we derive a geometric distance to the nova of 4.54 +/- 0.59 kpc from the Sun.

The rapidly rotating Be star phi Persei was spun up by mass and angular momentum transfer from a now stripped-down, hot subdwarf companion. Here we present the first high angular resolution images of phi Persei made possible by new capabilities in longbaseline interferometry at near-IR and visible wavelengths. We observed phi Persei with the MIRC and VEGA instruments of the CHARA Array. Additional MIRC-only observations were performed to track the orbital motion of the companion, and these were fit together with new and existing radial velocity measurements of both stars to derive the complete orbital elements and distance. The hot subdwarf companion is clearly detected in the near-IR data at each epoch of observation with a flux contribution of 1.5% in the H band, and restricted fits indicate that its flux contribution rises to 3.3% in the visible. A new binary orbital solution is determined by combining the astrometric and radial velocity measurements. The derived stellar masses are 9.6+-0.3Msol and 1.2+-0.2Msol for the Be primary and subdwarf secondary, respectively. The inferred distance (186 +- 3 pc), kinematical properties, and evolutionary state are consistent with membership of phi Persei in the alpha Per cluster. From the cluster age we deduce significant constraints on the initial masses and evolutionary mass transfer processes that transformed the phi Persei binary system. The interferometric data place strong constraints on the Be disk elongation, orientation, and kinematics, and the disk angular momentum vector is coaligned with and has the same sense of rotation as the orbital angular momentum vector. The VEGA visible continuum data indicate an elongated shape for the Be star itself, due to the combined effects of rapid rotation, partial obscuration of the photosphere by the circumstellar disk, and flux from the bright inner disk.

We determined the fundamental properties of HD 140283 by obtaining new interferometric and spectroscopic measurements and combining them with photometry from the literature. The interferometric measurements were obtained using the visible interferometer VEGA on the CHARA array and we determined a 1D limb-darkened angular diameter of 0.353 +/- 0.013 milliarcseconds. Using photometry from the literature we derived the bolometric flux with two solutions: a zero-reddening one of Fbol = 3.890 +/- 0.066 1E-8 erg/s/cm2 and a solution with a maximum of Av = 0.1 mag, Fbol= 4.220 +/- 0.067 1E-8 erg/s/cm2. The interferometric Teff is thus 5534 +/- 103 K or 5647 +/- 105 K and its radius is R = 2.21 +/- 0.08 Rsol. Spectroscopic measurements of HD140283 were obtained using HARPS, NARVAL, and UVES and a 1D LTE analysis of H-alpha line wings yields Teff(Halpha) = 5626 +/- 75 K. Using fine-tuned stellar models including diffusion of elements we then determined the mass M and age t of HD140283. Once the metallicity has been fixed, the age of the star depends on M, initial helium abundance Yi and mixing-length parameter alpha, only two of which are independent. We need to adjust alpha to much lower values than the solar one (~2) in order to fit the observations, and if Av = 0.0 mag then 0.5 < alpha < 1. We give an equation to estimate t from M, Yi (alpha) and Av. Establishing a reference alpha = 1.00 and adopting Yi = 0.245 we derive a mass and age of HD140283: M = 0.780 +/- 0.010 Msol and t = 13.7 +/- 0.7 Gyr (Av = 0.0) or M = 0.805 +/- 0.010 Msol and t = 12.2 +/- 0.6 Gyr (Av=0.1 mag). Our stellar models yield an initial metallicity of [Z/X]i = -1.70 and logg = 3.65 +/- 0.03. Asteroseismic observations are critical for overcoming limitations in our results.

Stellar activity causes difficulties in the characterization of transiting exoplanets. Studies have been performed to quantify its impact on infrared interferometry, but not in the visible domain, which however allows reaching better angular resolution and is also the one mostly used for spectroscopic and photometric measurements. We use a standard case to completely analyse the impact of an exoplanet and a spot on interferometric observables and relate it to current instrument capabilities, taking into account realistic achievable precisions. We built a numerical code called COMETS using analytical formulae to perform a simple comparison of exoplanet and spot signals. We explore instrumental specificities needed to detect them, like the baseline length required, the accuracy and S/N. We also discuss the impact of exoplanet and spot parameters on squared visibility and phase. We find that the main improvement to bring is the sensitivity of instruments. The accuracy on squared visibilities has to be improved by a factor 10 to detect an exoplanet of 0.1 mas, leading to $<0.5%$ precision, along with phase measurements of ~$5^{\deg}$ accuracy beyond the first null of visibility. For a 0.05 mas exoplanet, accuracies of ~$0.1%$ and ~$1^{\deg}$ from the first null are required on squared visibilities and phases, respectively. Magnetic spots can mimic these signals, leading to false exoplanet characterization. Phases measurements from the 3rd lobe is needed to distinguish between a spot and an exoplanet if they have the same radius. Increasing interferometer sensitivity, more objects will become common between interferometric targets and photometric ones. Furthermore, new missions like PLATO, CHEOPS or TESS will provide bright exoplanet host stars. Measurements will thus overlap and provide a better characterization of stellar activity and exoplanet.

HD 50138 is a B[e] star surrounded by a large amount of circumstellar gas and dust. Its spectrum shows characteristics which may indicate either a pre- or a post-main-sequence system. Mapping the kinematics of the gas in the inner few au of the system contributes to a better understanding of its physical nature. We present the first high spatial and spectral resolution interferometric observations of the Br-gamma line of HD~50138, obtained with VLTI/AMBER. The line emission originates from a region more compact (up to 3 au) than the continuum-emitting region. Blue- and red-shifted emission originates from the two different hemispheres of an elongated structure perpendicular to the polarization angle. The velocity of the emitting medium decreases radially. An overall offset along the NW direction between the line- and continuum-emitting regions is observed. We compare the data with a geometric model of a thin Keplerian disk and a spherical halo on top of a Gaussian continuum. Most of the data are well reproduced by this model, except for the variability, the global offset and the visibility at the systemic velocity. The evolutionary state of the system is discussed; most diagnostics are ambiguous and may point either to a post-main-sequence or a pre-main-sequence nature.

The aim of this work is to improve the SBC relation for early-type stars in the $-1 \leq V-K \leq 0$ color domain, using optical interferometry. Observations of eight B- and A-type stars were secured with the VEGA/CHARA instrument in the visible. The derived uniform disk angular diameters were converted into limb darkened angular diameters and included in a larger sample of 24 stars, already observed by interferometry, in order to derive a revised empirical relation for O, B, A spectral type stars with a V-K color index ranging from -1 to 0. We also took the opportunity to check the consistency of the SBC relation up to $V-K \simeq 4$ using 100 additional measurements. We determined the uniform disk angular diameter for the eight following stars: $\gamma$ Ori, $\zeta$ Per, $8$ Cyg, $\iota$ Her, $\lambda$ Aql, $\zeta$ Peg, $\gamma$ Lyr, and $\delta$ Cyg with V-K color ranging from -0.70 to 0.02 and typical precision of about $1.5\%$. Using our total sample of 132 stars with $V-K$ colors index ranging from about $-1$ to $4$, we provide a revised SBC relation. For late-type stars ($0 \leq V-K \leq 4$), the results are consistent with previous studies. For early-type stars ($-1 \leq V-K \leq 0$), our new VEGA/CHARA measurements combined with a careful selection of the stars (rejecting stars with environment or stars with a strong variability), allows us to reach an unprecedented precision of about 0.16 magnitude or $\simeq 7\%$ in terms of angular diameter.

When observed with optical long-baseline interferometers (OLBI), components of a binary star which are sufficiently separated produce their own interferometric fringe packets; these are referred to as Separated Fringe Packet (SFP) binaries. These SFP binaries can overlap in angular separation with the regime of systems resolvable by speckle interferometry at single, large-aperture telescopes and can provide additional measurements for preliminary orbits lacking good phase coverage, help constrain elements of already established orbits, and locate new binaries in the undersampled regime between the bounds of spectroscopic surveys and speckle interferometry. In this process, a visibility calibration star is not needed, and the separated fringe packets can provide an accurate vector separation. In this paper, we apply the SFP approach to {\omega} Andromeda, HD 178911, and {\xi} Cephei with the CLIMB three-beam combiner at the CHARA Array. For these systems we determine component masses and parallax of 0.963${\pm}$0.049 $M_{\odot}$ and 0.860${\pm}$0.051 $M_{\odot}$ and 39.54${\pm}$1.85 milliarcseconds (mas) for {\omega} Andromeda, for HD 178911 of 0.802${\pm}$0.055 $M_{\odot}$ and 0.622${\pm}$0.053 $M_{\odot}$ with 28.26${\pm}$1.70 mas, and masses of 1.045${\pm}$0.031 $M_{\odot}$ and 0.408${\pm}$0.066 $M_{\odot}$ and 38.10${\pm}$2.81 mas for {\xi} Cephei.

Aims. We used realistic three-dimensional (3D) radiative hydrodynamical (RHD) simulations from the Stagger-grid and synthetic images computed with the radiative transfer code Optim3D to provide interferometric observables to extract the signature of stellar granulation and transiting planets. Methods. We computed intensity maps from RHD simulations for twelve interferometric instruments covering wavelengths ranging from optical to infrared. The stellar surface asymmetries in the brightness distribution mostly affect closure phases. We compared the closure phases of the system star with a transiting planet and the star alone and considered the impact of magnetic spots constructing a hypothetical starspots image. Results. All the simulations show departure from the axisymmetric case at all wavelengths. We presented two possible targets (Beta Com and Procyon) and found that departures up to 16 deg can be detected on the 3rd lobe and higher. In particular, MIRC is the most appropriate instrument because it combines good UV coverage and long baselines. Moreover, we explored the impact of convection on interferometric planet signature for three prototypes of planets. It is possible to disentangle the signature of the planet at particular wavelengths (either in the infrared or in the optical) by comparing the closure phases of the star at difference phases of the planetary transit. Conclusions. The detection and characterisation of planets must be based on a comprehensive knowledge of the host star; this includes the detailed study of the stellar surface convection with interferometric techniques. In this context, RHD simulations are crucial to reach this aim. We emphasize that interferometric observations should be pushed at high spatial frequencies by accumulating observations on closure phases at short and long baselines.

We describe the data flow in the operation of the VEGA/CHARA instrument. After a brief summary of the main characteristics and scientific objectives of the VEGA instrument, we explain the standard procedure from the scientific idea up to the execution of the observation. Then, we describe the different steps done after the observation, from the raw data to the archives and the final products. Many tools are used and we show how the Virtual Observatory principles have been implemented for the interoperability of these software and databases.

Due to the strong magnetic field and related abnormal surface layers existing in rapidly oscillating Ap stars, systematic errors are likely to be present when determining their effective temperatures, which potentially compromises asteroseismic studies of these pulsators. Using long-baseline interferometry, our goal is to determine accurate angular diameters of a number of roAp targets to provide a temperature calibration for these stars. We obtained interferometric observations of 10 Aql with the visible spectrograph VEGA at the CHARA array. We determined a limb-darkened angular diameter of 0.275+/-0.009 mas and deduced a linear radius of 2.32+/-0.09 R_sun. We estimated the star's bolometric flux and used it, in combination with its parallax and angular diameter, to determine the star's luminosity and effective temperature. For two data sets of bolometric flux we derived an effective temperature of 7800+/-170 K and a luminosity of 18+/-1 L_sun or of 8000+/-210 K and 19+/-2 L_sun. We used these fundamental parameters together with the large frequency separation to constrain the mass and the age of 10 Aql, using the CESAM stellar evolution code. Assuming a solar chemical composition and ignoring all kinds of diffusion and settling of elements, we obtained a mass of 1.92 M_sun and an age of 780 Gy or a mass of 1.95 M_sun and an age of 740 Gy, depending on the considered bolometric flux. For the first time, we managed to determine an accurate angular diameter for a star smaller than 0.3 mas and to derive its fundamental parameters. In particular, by only combining our interferometric data and the bolometric flux, we derived an effective temperature that can be compared to those derived from atmosphere models. Such fundamental parameters can help for testing the mechanism responsible for the excitation of the oscillations observed in the magnetic pulsating stars.

Binary post-AGB stars are interesting laboratories to study both the evolution of binaries as well as the structure of circumstellar disks. A multiwavelength high angular resolution study of the prototypical object 89 Herculis is performed with the aim of identifying and locating the different emission components seen in the SED. A large interferometric data set, collected over the past decade and covering optical and near-IR wavelengths, is analyzed with simple geometric models. Combining the interferometric constraints with the photometry and the optical spectra, we reassess the energy budget of the post-AGB star and its circumstellar environment. We report the first (direct) detection of a large (35-40%) optical circumstellar flux contribution and spatially resolve its emission region. Given this large amount of reprocessed and/or redistributed optical light, the fitted size of the emission region is rather compact and fits with(in) the inner rim of the circumbinary dust disk. This rim dominates our K band data through thermal emission and is rather compact, emitting significantly already at a radius of twice the orbital separation. We interpret the circumstellar optical flux as due to a scattering process, with the scatterers located in the extremely puffed-up inner rim of the disk and possibly also in a bipolar outflow seen pole-on. A non-LTE gaseous origin in an inner disk cannot be excluded but is considered highly unlikely. This direct detection of a significant amount of circumbinary light at optical wavelengths poses several significant questions regarding our understanding of both post-AGB binaries and the physics in their circumbinary disks. Although the identification of the source of emission/scattering remains inconclusive without further study on this and similar objects, the implications are manifold.

Young close binaries clear central cavities in their surrounding circumbinary disk from which the stars can still accrete material. This process takes place within the very first astronomical units, and is still not well constrained as the observational evidence has been gathered, until now, only by means of spectroscopy. The young object HD200775 (MWC361) is a massive spectroscopic binary (separation of ~15.9mas, ~5.0~AU), with uncertain classification (early/late Be), that shows a strong and variable Halpha emission. We aim to study the mechanisms that produce the Halpha line at the AU-scale. Combining the radial velocity measurements and astrometric data available in the literature, we determined new orbital parameters. With the VEGA instrument on the CHARA array, we spatially and spectrally resolved the Halpha emission of HD200775, at low and medium spectral resolutions (R~1600 and 5000) over a full orbital period (~3.6 years). We observe that the Halpha equivalent width varies with the orbital phase, and increases close to periastron, as expected from theoretical models that predict an increase of the mass transfer from the circumbinary disk to the primary disk. In addition, using spectral visibilities and differential phases, we find marginal variations of the typical extent of the Halpha emission (at 1 to 2-sigma level) and location (at 1 to 5-sigma level). The spatial extent of the Halpha emission, as probed by a Gaussian FWHM, is minimum at the ascending node (0.67+/-0.20 mas, i.e., 0.22+/-0.06 AU), and more than doubles at periastron. In addition, the Gaussian photocenter is slightly displaced in the direction opposite to the secondary, ruling out the scenario in which all or most of the Halpha emission is due to accretion onto the secondary. These findings, together with the wide Halpha line profile, may be due to a non-spherical wind enhanced at periastron.

High-resolution spectroscopy of pulsating stars is a powerful tool to study the dynamical structure of their atmosphere. Lines asymmetry is used to derive the center-of-mass velocity of the star, while a direct measurement of the atmospheric velocity gradient helps determine the projection factor used in the Baade-Wesselink method of distance determination. We aim at deriving the center-of-mass velocity and the projection factor of the beta-Cephei star alpha-Lup. We present HARPS high spectral resolution observations of alpha-Lup. We calculate the first-moment radial velocities and fit the spectral line profiles by a bi-Gaussian to derive line asymmetries. Correlations between the gamma-velocity and the gamma-asymmetry (defined as the average values of the radial velocity and line asymmetry curves respectively) are used to derive the center-of-mass velocity of the star. By combining our spectroscopic determination of the atmospheric velocity gradient with a hydrodynamical modelof the photosphere of the star, we derive a semi-theoretical projection factor for alpha Lup. We find a center-of-mass velocity of Vgamma = 7.9 +/- 0.6 km/s and that the velocity gradient in the atmosphere of alpha Lup isnull. We apply to alpha Lup the usual decomposition of the projection factor into three parts, p = p0 fgrad fog (originally developed for Cepheids), and derive a projection factor of p = 1.43 +/-0.01. By comparing our results with previous HARPS observations of classical Cepheids, we also point out a linear relation between the atmospheric velocity gradient and the amplitude of the radial velocity curve. Moreover, we observe a phase shift (Van Hoof effect), whereas alpha Lup has no velocity gradient.

Aims. The Baade-Wesselink method of distance determination is based on the oscillations of pulsating stars. The key parameter of this method is the projection factor used to convert the radial velocity into the pulsation velocity. Our analysis was aimed at deriving for the first time the projection factor of delta Scuti stars, using high-resolution spectra of the high-amplitude pulsator AI Vel and of the fast rotator beta Cas. Methods. The geometric component of the projection factor (i.e. p0) was calculated using a limb-darkening model of the intensity distribution for AI Vel, and a fast-rotator model for beta Cas. Then, using SOPHIE/OHP data for beta Cas and HARPS/ESO data for AI Vel, we compared the radial velocity curves of several spectral lines forming at different levels in the atmosphere and derived the velocity gradient associated to the spectral-line-forming regions in the atmosphere of the star. This velocity gradient was used to derive a dynamical projection factor p. Results. We find a flat velocity gradient for both stars and finally p = p0 = 1.44 for AI Vel and p = p0 = 1.41 for beta Cas. By comparing Cepheids and delta Scuti stars, these results bring valuable insights into the dynamical structure of pulsating star atmospheres. They suggest that the period-projection factor relation derived for Cepheids is also applicable to delta Scuti stars pulsating in a dominant radial mode.

Studying exoplanet host stars is of the utmost importance to establish the link between the presence of exoplanets around various types of stars and to understand the respective evolution of stars and exoplanets. Using the limb-darkened diameter (LDD) obtained from interferometric data, we determine the fundamental parameters of four exoplanet host stars. We are particularly interested in the F4 main-sequence star, {\theta} Cyg, for which Kepler has recently revealed solar-like oscillations that are unexpected for this type of star. Furthermore, recent photometric and spectroscopic measurements with SOPHIE and ELODIE (OHP) show evidence of a quasi-periodic radial velocity of \sim150 days. Models of this periodic change in radial velocity predict either a complex planetary system orbiting the star, or a new and unidentified stellar pulsation mode. We performed interferometric observations of {\theta} Cyg, 14 Andromedae, {\upsilon} Andromedae and 42 Draconis for two years with VEGA/CHARA (Mount Wilson, California) in several three-telescope configurations. We measured accurate limb darkened diameters and derived their radius, mass and temperature using empirical laws. We obtain new accurate fundamental parameters for stars 14 And, {\upsilon} And and 42 Dra. We also obtained limb darkened diameters with a minimum precision of \sim 1.3%, leading to minimum planet masses of Msini=5.33\pm 0.57, 0.62 \pm 0.09 and 3.79\pm0.29 MJup for 14 And b, {\upsilon} And b and 42 Dra b, respectively. The interferometric measurements of {\theta} Cyg show a significant diameter variability that remains unexplained up to now. We propose that the presence of these discrepancies in the interferometric data is caused by either an intrinsic variation of the star or an unknown close companion orbiting around it.

\gamma Cas is the prototypical classical Be star and is best known for its variable hard X-ray emission. To elucidate the reasons for this emission, we mounted a multiwavelength campaign in 2010 centered around 4 XMM observations. The observational techniques included long baseline optical interferometry (LBOI), monitoring by an Automated Photometric Telescope and Halpha observations. Because gamma Cas is also known to be in a binary, we measured Halpha radial velocities and redetermined its period as 203.55+/-0.2 days and an eccentricity near zero. The LBOI observations suggest that the star's decretion disk was axisymmetric in 2010, has an inclination angle near 45^o, and a larger radius than previously reported. The Be star began an "outburst" at the beginning of our campaign, made visible by a disk brightening and reddening during our campaign. Our analyses of the new high resolution spectra disclosed many attributes found from spectra obtained in 2001 (Chandra) and 2004 (XMM). As well as a dominant hot 14 keV thermal component, these familiar ones included: (i) a fluorescent feature of Fe K stronger than observed at previous times, (ii) strong lines of N VII and Ne XI lines indicative of overabundances, and (iii) a subsolar Fe abundance from K-shell lines but a solar abundance from L-shell ions. We also found that 2 absorption columns are required to fit the continuum. While the first one maintained its historical average of 1X10^21 cm^-2, the second was very large and doubled to 7.4X10^23 cm^-2 during our X-ray observations. Although we found no clear relation between this column density and orbital phase, it correlates well with the disk brightening and reddening both in the 2010 and earlier observations. Thus, the inference from this study is that much (perhaps all?) of the X-ray emission from this source originates behind matter ejected by gamma Cas into our line of sight.

Studies are under way to propose a new generation of post-VLTI interferometers. The Carlina concept studied at the Haute- Provence Observatory is one of the proposed solutions. It consists in an optical interferometer configured like a diluted version of the Arecibo radio telescope: above the diluted primary mirror made of fixed cospherical segments, a helium balloon (or cables suspended between two mountains), carries a gondola containing the focal optics. Since 2003, we have been building a technical demonstrator of this diluted telescope. First fringes were obtained in May 2004 with two closely-spaced primary segments and a CCD on the focal gondola. We have been testing the whole optical train with three primary mirrors. The main aim of this article is to describe the metrology that we have conceived, and tested under the helium balloon to align the primary mirrors separate by 5-10 m on the ground with an accuracy of a few microns. The servo loop stabilizes the mirror of metrology under the helium balloon with an accuracy better than 5 mm while it moves horizontally by 30 cm in open loop by 10-20 km/h of wind. We have obtained the white fringes of metrology; i.e., the three mirrors are aligned (cospherized) with an accuracy of {\approx} 1 micron. We show data proving the stability of fringes over 15 minutes, therefore providing evidence that the mechanical parts are stabilized within a few microns. This is an important step that demonstrates the feasibility of building a diluted telescope using cables strained between cliffs or under a balloon. Carlina, like the MMT or LBT, could be one of the first members of a new class of telescopes named diluted telescopes.

Context. The interpretation of stellar pulsations in terms of internal structure depends on the knowledge of the fundamental stellar parameters. Long-base interferometers permit us to determine very accurate stellar radii, which are independent constraints for stellar models that help us to locate the star in the HR diagram. Aims: Using a direct interferometric determination of the angular diameter and advanced three-dimensional (3D) modeling, we derive the radius of the CoRoT target HD 49933 and reduce the global stellar parameter space compatible with seismic data. Methods: The VEGA/CHARA spectro-interferometer is used to measure the angular diameter of the star. A 3D radiative hydrodynamical simulation of the surface is performed to compute the limb darkening and derive a reliable diameter from visibility curves. The other fundamental stellar parameters (mass, age, and Teff) are found by fitting the large and small p-mode frequency separations using a stellar evolution model that includes microscopic diffusion. Results: We obtain a limb-darkened angular diameter of {\theta}LD = 0.445 \pm 0.012 mas. With the Hipparcos parallax, we obtain a radius of R = 1.42 \pm 0.04 Rsun. The corresponding stellar evolution model that fits both large and small frequency separations has a mass of 1.20 \pm 0.08 Msun and an age of 2.7 Gy. The atmospheric parameters are Teff = 6640 \pm 100 K, log g = 4.21 \pm 0.14, and [Fe/H] = -0.38.

Context. Recent observations of LMC Cepheids bring new constraints on the slope of the period-projection factor relation (hereafter Pp relation) that is currently used in the Baade-Wesselink (hereafter BW) method of distance determination. The discrepancy between observations and theoretical analysis is particularly significant for short period Cepheids Aims. We investigate three physical effects that might possibly explain this discrepancy: (1) the spectroscopic S/N that is systematically lower for LMC Cepheids (around 10) compared to Galactic ones (up to 300), (2) the impact of the metallicity on the dynamical structure of LMC Cepheids, and (3) the combination of infrared photometry/interferometry with optical spectroscopy. Methods. To study the S/N we use a very simple toy model of Cepheids. The impact of metallicity on the projection factor is based on the hydrodynamical model of delta Cep already described in previous studies. This model is also used to derive the position of the optical versus infrared photospheric layers. Results. We find no significant effect of S/N, metallicity, and optical-versus-infrared observations on the Pp relation. Conclusions. The Pp relation of Cepheids in the LMC does not differ from the Galactic relation. This allows its universal application to determine distances to extragalactic Cepheids via BW analysis.

We aim to constrain the geometrical extent of the chromosphere of non-binary K giant stars and detect any spatial structures in the chromosphere. We performed observations with the CHARA interferometer and the VEGA beam combiner at optical wavelengths. We observed seven non-binary K giant stars. We measured the ratio of the radii of the photosphere to the chromosphere using the interferometric measurements in the Halpha and the Ca II infrared triplet line cores. For beta Ceti, spectro-interferometric observations are compared to an non-local thermal equilibrium (NLTE) semi-empirical model atmosphere including a chromosphere. The NLTE computations provide line intensities and contribution functions that indicate the relative locations where the line cores are formed and can constrain the size of the limb-darkened disk of the stars with chromospheres. We measured the angular diameter of seven K giant stars and deduced their fundamental parameters: effective temperatures, radii, luminosities, and masses. We determined the geometrical extent of the chromosphere for four giant stars. The chromosphere extents obtained range between 16% to 47% of the stellar radius. The NLTE computations confirm that the Ca II/849 nm line core is deeper in the chromosphere of ? Cet than either of the Ca II/854 nm and Ca II/866 nm line cores. We present a modified version of a semi-empirical model atmosphere derived by fitting the Ca II triplet line cores of this star. In four of our targets, we also detect the signature of a differential signal showing the presence of asymmetries in the chromospheres. Conclusions. It is the first time that geometrical extents and structure in the chromospheres of non-binary K giant stars are determined by interferometry. These observations provide strong constrains on stellar atmosphere models.

High angular resolution images obtained with a hypertelescope can strongly constrain the radiative-hydrodynamics simulations of red supergiant (RSG) stars, in terms of intensity contrast, granulation size and temporal variations of the convective motions that are visible on their surface. The characterization of the convective pattern in RSGs is crucial to solve the mass-loss mechanism which contributes heavily to the chemical enrichment of the Galaxy. We show here how the astrophysical objectives and the array configuration are highly dependent to design a hypertelescope. For a given field of view and a given resolution, there is a trade-off between the array geometry and the number of required telescopes to optimize either the (u,v) coverage (to recover the intensity distribution) or the dynamic range (to recover the intensity contrast). To obtain direct snapshot images of Betelgeuse with a hypertelescope, a regular and uniform layout of telescopes is the best array configuration to recover the intensity contrast and the distribution of both large and small granulation cells, but it requires a huge number of telescopes (several hundreds or thousands). An annular configuration allows a reasonable number of telescopes (lower than one hundred) to recover the spatial structures but it provides a low-contrast image. Concerning the design of a pupil densifier to combine all the beams, the photometric fluctuations are not critical Delta photometry < 50%) contrary to the residual piston requirements (OPD <lambda/8) which requires the development of an efficient cophasing system to fully exploit the imaging capability of a hypertelecope.

The CHARA Array is a six 1-m telescope optical and near infrared interferometer located at the Mount Wilson Observatory in southern California and operated by the Center for High Angular Resolution Astronomy of Georgia State University. The CHARA Array has been in regular scientific operation since 2005 and now has over 55 publications in the refereed literature, including two in Science and one in Nature. The Array now supports seven beam combiners ranging from 0.5 microns up to 2.3 microns and combing from 2 to 4 beams at a time. An upgrade to a full 6 beam combiner is now underway and fringes with all six telescopes were achieved soon after the meeting.We present some of the more recent results from the CHARA-Array.

Classical Be stars are hot non-supergiant stars surrounded by a gaseous circumstellar disk that is responsible for the observed IR-excess and emission lines. The influence of binarity on these phenomena remains controversial. delta Sco is a binary system whose primary suddently began to exhibit the Be phenomenon at the last periastron in 2000. We want to constrain the geometry and kinematics of its circumstellar environment. We observed the star between 2007 and 2010 using spectrally-resolved interferometry with the VLTI/AMBER and CHARA/VEGA instruments. We found orbital elements that are compatible with previous estimates. The next periastron should take place around July 5, 2011 (+- 4,days). We resolved the circumstellar disk in the HAlpha (FWHM = 4.8+-1.5mas), BrGamma (FWHM = 2.9 0.,mas), and the 2.06$ \mu$m HeI (FWHM = 2.4+-0.3mas) lines as well as in the K band continuum (FWHM ~2.4mas). The disk kinematics are dominated by the rotation, with a disk expansion velocity on the order of 0.2km/s. The rotation law within the disk is compatible with Keplerian rotation. As the star probably rotates at about 70% of its critical velocity the ejection of matter doesn't seems to be dominated by rotation. However, the disk geometry and kinematics are similar to that of the previously studied quasi-critically rotating Be stars, namely Alpha Ara, Psi Per and 48 Per.

Context. To progress in the understanding of evolution of massive stars one needs to constrain the mass-loss and determine the phenomenon responsible for the ejection of matter an its reorganization in the circumstellar environment Aims. In order to test various mass-ejection processes, we probed the geometry and kinematics of the dust and gas surrounding the A[e] supergiant HD 62623. Methods. We used the combined high spectral and spatial resolution covered by the VLTI/AMBER instrument. Thanks to a new multiwavelength optical/IR interferometry imaging technique, we reconstructed the first velocity-resolved images with a milliarcsecond resolution in the infrared domain. Results. We managed to disentangle the dust and gas emission in the HD 62623 circumstellar disc.We measured the dusty disc inner inner rim, i.e. 6 mas, constrained the inclination angle and the position angle of the major-axis of the disc.We also measured the inner gaseous disc extension (2 mas) and probed its velocity field thanks to AMBER high spectral resolution. We find that the expansion velocity is negligible, and that Keplerian rotation is a favoured velocity field. Such a velocity field is unexpected if fast rotation of the central star alone is the main mechanism of matter ejection. Conclusions. As the star itself seems to rotate below its breakup-up velocity, rotation cannot explain the formation of the dense equatorial disc. Moreover, as the expansion velocity is negligible, radiatively driven wind is also not a suitable explanation to explain the disc formation. Consequently, the most probable hypothesis is that the accumulation of matter in the equatorial plane is due to the presence of the spectroscopic low mass companion.

Since the external regions of the envelopes of rapidly rotating early-type stars are unstable to convection, a coupling may exist between the convection and the internal rotation. We explore what can be learned from spectroscopic and interferometric observations about the properties of the rotation law in the external layers of these objects. Using simple relations between the entropy and specific rotational quantities, some of which are found to be efficient at accounting for the solar differential rotation in the convective region, we derived analytical solutions that represent possible differential rotations in the envelope of early-type stars. A surface latitudinal differential rotation may not only be an external imprint of the inner rotation, but induces changes in the stellar geometry, the gravitational darkening, the aspect of spectral line profiles, and the emitted spectral energy distribution. By studying the equation of the surface of stars with non-conservative rotation laws, we conclude that objects undergo geometrical deformations that are a function of the latitudinal differential rotation able to be scrutinized both spectroscopically and by interferometry. The combination of Fourier analysis of spectral lines with model atmospheres provides independent estimates of the surface latitudinal differential rotation and the inclination angle. Models of stars at different evolutionary stages rotating with internal conservative rotation laws were calculated to show that the Roche approximation can be safely used to account for the gravitational potential. The surface temperature gradient in rapid rotators induce an acceleration to the surface angular velocity. A non-zero differential rotation parameter may indicate that the rotation is neither rigid nor shellular underneath the stellar surface.

Physical processes working in the stellar interiors as well as the evolution of stars depend on some fundamental stellar properties, such as mass, radius, luminosity, and chemical abundances. A classical way to test stellar interior models is to compare the predicted and observed location of a star on theoretical evolutionary tracks in a H-R diagram. This requires the best possible determinations of stellar mass, radius, luminosity and abundances. To derive its fundamental parameters, we observed the well-known rapidly oscillating Ap star, $\gamma$ Equ, using the visible spectro-interferometer VEGA installed on the optical CHARA array. We computed the calibrated squared visibility and derived the limb-darkened diameter. We used the whole energy flux distribution, the parallax and this angular diameter to determine the luminosity and the effective temperature of the star. We obtained a limb-darkened angular diameter of 0.564~$\pm$~0.017~mas and deduced a radius of $R$~=~2.20~$\pm$~0.12~${\rm R_{\odot}}$. Without considering the multiple nature of the system, we derived a bolometric flux of $(3.12\pm 0.21)\times 10^{-7}$ erg~cm$^{-2}$~s$^{-1}$ and an effective temperature of 7364~$\pm$~235~K, which is below the effective temperature that has been previously determined. Under the same conditions we found a luminosity of $L$~=~12.8~$\pm$~1.4~${\rm L_{\odot}}$. When the contribution of the closest companion to the bolometric flux is considered, we found that the effective temperature and luminosity of the primary star can be, respectively, up to $\sim$~100~K and up to $\sim$~0.8~L$_\odot$ smaller than the values mentioned above.These new values of the radius and effective temperature should bring further constraints on the asteroseismic modelling of the star.

There are currently two optical interferometry recombiners that can provide spectral resolutions better than 10000, AMBER/VLTI operating in the H-K bands, and VEGA/CHARA, recently commissioned, operating in the visible. These instruments are well suited to study the wind activity of the brightest AB supergiants in our vicinity, in lines such as H$\alpha$ or BrGamma. We present here the first observations of this kind, performed on Rigel (B8Ia) and Deneb (A2Ia). Rigel was monitored by AMBER in two campaigns, in 2006-2007 and 2009-2010, and observed in 2009 by VEGA; whereas Deneb was monitored in 2008-2009 by VEGA. The extension of the Halpha and BrGamma line forming regions were accurately measured and compared with CMFGEN models of both stars. Moreover, clear signs of activity were observed in the differential visibility and phases. These pioneer observations are still limited, but show the path for a better understanding of the spatial structure and temporal evolution of localized ejections using optical interferometry.

High-precision interferometric measurements of pulsating stars help to characterize their close environment. In 1974, a close companion was discovered around the pulsating star beta Cep using the speckle interferometry technique and features at the limit of resolution (20 milli-arcsecond or mas) of the instrument were mentioned that may be due to circumstellar material. Beta Cep has a magnetic field that might be responsible for a spherical shell or ring-like structure around the star as described by the MHD models. Using the visible recombiner VEGA installed on the CHARA long-baseline interferometer at Mt. Wilson, we aim to determine the angular diameter of beta Cep and resolve its close environment with a spatial resolution up to 1 mas level. Medium spectral resolution (R=6000) observations of beta Cep were secured with the VEGA instrument over the years 2008 and 2009. These observations were performed with the S1S2 (30m) and W1W2 (100m) baselines of the array. We investigated several models to reproduce our observations. A large-scale structure of a few mas is clearly detected around the star with a typical flux relative contribution of 0.23 +- 0.02. Our best model is a co-rotational geometrical thin ring around the star as predicted by magnetically-confined wind shock models. The ring inner diameter is 8.2 +- 0.8 mas and the width is 0.6 +- 0.7 mas. The orientation of the rotation axis on the plane of the sky is PA = 60 +- 1 deg, while the best fit of the mean angular diameter of beta Cep gives UD[V] = 0.22 +- 0.05 mas. Our data are compatible with the predicted position of the close companion of beta Cep. These results bring additional constraints on the fundamental parameters and on the future MHD and asteroseismological models of the star.

We have chosen the name of GYES, one of the mythological giants with one hundred arms, offspring of Gaia and Uranus, for our instrument study of a multifibre spectrograph for the prime focus of the Canada-France-Hawaii Telescope. Such an instrument could provide an excellent ground-based complement for the Gaia mission and a northern complement to the HERMES project on the AAT. The CFHT is well known for providing a stable prime focus environment, with a large field of view, which has hosted several imaging instruments, but has never hosted a multifibre spectrograph. Building upon the experience gained at GEPI with FLAMES-Giraffe and X-Shooter, we are investigating the feasibility of a high multiplex spectrograph (about 500 fibres) over a field of view 1 degree in diameter. We are investigating an instrument with resolution in the range 15000 to 30000, which should provide accurate chemical abundances for stars down to 16th magnitude and radial velocities, accurate to 1 km/s for fainter stars. The study is led by GEPI-Observatoire de Paris with a contribution from Oxford for the study of the positioner. The financing for the study comes from INSU CSAA and Observatoire de Paris. The conceptual study will be delivered to CFHT for review by October 1st 2010.

In a few years, the second generation instruments of the Very Large Telescope Interferometer (VLTI) will routinely provide observations with 4 to 6 telescopes simultaneously. To reach their ultimate performance, they will need a fringe sensor capable to measure in real time the randomly varying optical paths differences. A collaboration between LAOG (PI institute), IAGL, OCA and GIPSA-Lab has proposed the Planar Optics Phase Sensor concept to ESO for the 2nd Generation Fringe Tracker. This concept is based on the integrated optics technologies, enabling the conception of extremely compact interferometric instruments naturally providing single-mode spatial filtering. It allows operations with 4 and 6 telescopes by measuring the fringes position thanks to a spectrally dispersed ABCD method. We present here the main analysis which led to the current concept as well as the expected on-sky performance and the proposed design.

BA-type supergiants are amongst the most optically-bright stars. They are observable in extragalactic environments, hence potential accurate distance indicators. Emission activity in the Halpha line of the BA supergiants Rigel (B8Ia) and Deneb (A2Ia) is indicative of presence of localized time-dependent mass ejections. Here, we employ optical interferometry to study the Halpha line-formation region in these stellar environments. High spatial- (0.001 arcsec) and spectral- (R=30 000) resolution observations of Halpha were obtained with the visible recombiner VEGA installed on the CHARA interferometer, using the S1S2 array-baseline (34m). Six independent observations were done on Deneb over the years 2008 and 2009, and two on Rigel in 2009. We analyze this dataset with the 1D non-LTE radiative-transfer code CMFGEN, and assess the impact of the wind on the visible and near-IR interferometric signatures, using both Balmer-line and continuum photons. We observe a visibility decrease in Halpha for both Rigel and Deneb, suggesting that the line-formation region is extended (1.5-1.75 R*). We observe a significant visibility decrease for Deneb in the SiII6371 line. We witness time variations in the differential phase for Deneb, implying an inhomogeneous and unsteady circumstellar environment, while no such variability is seen in differential visibilities. Radiative-transfer modeling of Deneb, with allowance for stellar-wind mass loss, accounts fairly well for the observed decrease in the Halpha visibility. Based on the observed differential visibilities, we estimate that the mass-loss rate of Deneb has changed by less than 5%.

A crucial issue in star formation is to understand the physical mechanism by which mass is accreted onto and ejected by a young star. The visible spectrometer VEGA on the CHARA array can be an efficient means of probing the structure and the kinematics of the hot circumstellar gas at sub-AU. For the first time, we observed the Herbig Ae star AB Aur in the H$\alpha$ emission line, using the VEGA low spectral resolution on two baselines of the array. We computed and calibrated the spectral visibilities between 610 nm and 700 nm. To simultaneously reproduce the line profile and the visibility, we used a 1-D radiative transfer code that calculates level populations for hydrogen atoms in a spherical geometry and synthetic spectro-interferometric observables. We clearly resolved AB Aur in the H$\alpha$ line and in a part of the continuum, even at the smallest baseline of 34 m. The small P-Cygni absorption feature is indicative of an outflow but could not be explained by a spherical stellar wind model. Instead, it favors a magneto-centrifugal X-disk or disk-wind geometry. The fit of the spectral visibilities could not be accounted for by a wind alone, so we considered a brightness asymmetry possibly caused by large-scale nebulosity or by the known spiral structures, inducing a visibility modulation around H$\alpha$. Thanks to the unique capabilities of VEGA, we managed to simultaneously record for the first time a spectrum at a resolution of 1700 and spectral visibilities in the visible range on a target as faint as $m_{V}$ = 7.1. It was possible to rule out a spherical geometry for the wind of AB Aur and provide realistic solutions to account for the H$\alpha$ emission compatible with magneto-centrifugal acceleration. The study illustrates the advantages of optical interferometry and motivates observations of other bright young stars to shed light on the accretion/ejection processes.

In the future, optical stellar interferometers will provide true images thanks to larger number of telescopes and to advanced cophasing subsystems. These conditions are required to have sufficient resolution elements (resel) in the image and to provide direct images in the hypertelescope mode. It has already been shown that hypertelescopes provide snapshot images with a significant gain in sensitivity without inducing any loss of the useful field of view for direct imaging applications. This paper aims at studying the properties of the point spread functions of future large arrays using the hypertelescope mode. Numerical simulations have been performed and criteria have been defined to study the image properties. It is shown that the choice of the configuration of the array is a trade-off between the resolution, the halo level and the field of view. A regular pattern of the array of telescopes optimizes the image quality (low halo level and maximum encircled energy in the central peak), but decreases the useful field of view. Moreover, a non-redundant array is less sensitive to the space aliasing effect than a redundant array.

We obtained spectro-interferometric observations in the visible of $\beta$ Lyrae and $\upsilon$ Sgr using the instrument VEGA of the CHARA interferometric array. For $\beta$ Lyrae, the dispersed fringe visibilities and differential phases were obtained in spectral regions containing the H$\alpha$ and HeI 6678 lines and the H$\beta$ and HeI 4921 lines. Whereas the source is unresolved in the continuum, the source of the emission lines is resolved and the photocenter of the bulk of the H$\alpha$ emission exhibits offsets correlated with the orbital phase. For $\upsilon$ Sgr, both the continuum and H$\alpha$ sources are resolved, but no clear binary signal is detected. The differential phase shift across the line reveals that the bulk of the H$\alpha$ emission is clearly offset from the primary.

The Fourier-Kelvin Stellar Interferometer (FKSI) is a mission concept for a nulling interferometer for the near-to-mid-infrared spectral region. FKSI is conceived as a mid-sized strategic or Probe class mission. FKSI has been endorsed by the Exoplanet Community Forum 2008 as such a mission and has been costed to be within the expected budget. The current design of FKSI is a two-element nulling interferometer. The two telescopes, separated by 12.5 m, are precisely pointed (by small steering mirrors) on the target star. The two path lengths are accurately controlled to be the same to within a few nanometers. A phase shifter/beam combiner (Mach-Zehnder interferometer) produces an output beam consisting of the nulled sum of the target planet's light and the host star's light. When properly oriented, the starlight is nulled by a factor of 10^-4, and the planet light is undiminished. Accurate modeling of the signal is used to subtract the residual starlight, permitting the detection of planets much fainter than the host star. The current version of FKSI with 0.5-m apertures and waveband 3-8 microns has the following main capabilities: (1) detect exozodiacal emission levels to that of our own solar system (1 Solar System Zodi) around nearby F, G, and K, stars; (2) characterize spectroscopically the atmospheres of a large number of known non-transiting planets; (3) survey and characterize nearby stars for planets down to 2 Earth radii from just inside the habitable zone and inward. An enhanced version of FKSI with 1-m apertures separated by 20 m and cooled to 40 K, with science waveband 5-15 microns, allows for the detection and characterization of 2 Earth-radius super-Earths and smaller planets in the habitable zone around stars within about 30 pc.

Over 300 extrasolar planets (exoplanets) have been detected orbiting nearby stars. We now hope to conduct a census of all planets around nearby stars and to characterize their atmospheres and surfaces with spectroscopy. Rocky planets within their star's habitable zones have the highest priority, as these have the potential to harbor life. Our science goal is to find and characterize all nearby exoplanets; this requires that we measure the mass, orbit, and spectroscopic signature of each one at visible and infrared wavelengths. The techniques for doing this are at hand today. Within the decade we could answer long-standing questions about the evolution and nature of other planetary systems, and we could search for clues as to whether life exists elsewhere in our galactic neighborhood.

The cross correlation method (hereafter CC) is widely used to derive the radial velocity curve of Cepheids when the signal to noise of the spectra is low. However, if it is used with the wrong projection factor, it might introduce some biases in the Baade-Wesselink (hereafter BW) methods of determining the distance of Cepheids. In addition, it might affect the average value of the radial velocity curve (or gamma-velocity) important for Galactic structure studies. We aim to derive a period-projection factor relation (hereafter Pp) appropriate to be used together with the CC method. Moreover, we investigate whether the CC method can explain the misunderstood previous calculation of the K-term of Cepheids. We observed eight galactic Cepheids with the HARPS spectrograph. For each star, we derive an interpolated CC radial velocity curve using the HARPS pipeline. The amplitudes of these curves are used to determine the correction to be applied to the semi-theoretical projection factor derived in Nardetto et al. (2007). Their average value (or gamma-velocity) are also compared to the center-of-mass velocities derived in Nardetto et al. (2008). The correction in amplitudes allows us to derive a new Pp relation: p = [-0.08+-0.05] log P +[1.31+-0.06]. We also find a negligible wavelength dependence (over the optical range) of the Pp relation. We finally show that the gamma-velocity derived from the CC method is systematically blue-shifted by about 1.0 +- 0.2km/s compared to the center-of-mass velocity of the star. An additional blue-shift of 1.0km/s is thus needed to totally explain the previous calculation of the K-term of Cepheids (around 2km/s). The new Pp relation we derived is a solid tool for the distance scale calibration (abridged).

The discovery of extra-solar planets is one of the greatest achievements of modern astronomy. The detection of planets with a wide range of masses demonstrates that extra-solar planets of low mass exist. In this paper we describe a mission, called Darwin, whose primary goal is the search for, and characterization of, terrestrial extrasolar planets and the search for life. Accomplishing the mission objectives will require collaborative science across disciplines including astrophysics, planetary sciences, chemistry and microbiology. Darwin is designed to detect and perform spectroscopic analysis of rocky planets similar to the Earth at mid-infrared wavelengths (6 - 20 micron), where an advantageous contrast ratio between star and planet occurs. The baseline mission lasts 5 years and consists of approximately 200 individual target stars. Among these, 25 to 50 planetary systems can be studied spectroscopically, searching for gases such as CO2, H2O, CH4 and O3. Many of the key technologies required for the construction of Darwin have already been demonstrated and the remainder are estimated to be mature in the near future. Darwin is a mission that will ignite intense interest in both the research community and the wider public.

The projection factor is a key quantity for the interferometric Baade-Wesselink (hereafter IBW) and surface-brightness (hereafter SB) methods of determining the distance of Cepheids. Indeed, it allows a consistent combination of angular and linear diameters of the star. We aim to determine consistent projection factors that include the dynamical structure of the Cepheids' atmosphere. Methods. Hydrodynamical models of delta Cep and l Car have been used to validate a spectroscopic method of determining the projection factor. This method, based on the amplitude of the radial velocity curve, is applied to eight stars observed with the HARPS spectrometer. The projection factor is divided into three sub-concepts : (1) a geometrical effect, (2) the velocity gradient within the atmosphere, and (3) the relative motion of the "optical" pulsating photosphere compared to the corresponding mass elements (hereafter fo-g). Both, (1) and (3) are deduced from geometrical and hydrodynamical models, respectively, while (2) is derived directly from observations. The Fe I 4896.439 A line is found to be the best one to use in the context of IBW and SB methods. A coherent and consistent period-projection factor relation (hereafter Pp relation) is derived for this specific spectral line: p = [0.064 +- 0.020] log P + [1.376 +- 0.023]. This procedure is then extended to derive dynamic projection factors for any spectral line of any Cepheid. This Pp relation is an important tool for removing bias in the calibration of the period-luminosity relation of Cepheids. Moreover, it reveals a new physical quantity fo-g to investigate in the near future.

The ratio of pulsation to radial velocity (the projection factor) is currently limiting the accuracy of the interferometric Baade-Wesselink method. This work aims at establishing a link between the line asymmetry evolution over the Cepheids' pulsation cycles and their projection factor, with the final objective to improve the accuracy of the Baade-Wesselink method for distance determinations. We present HARPS high spectral resolution observations of nine galactic Cepheids having a good period sampling. We fit spectral line profiles by an asymmetric bi-Gaussian to derive radial velocity, Full-Width at Half-Maximum in the line (FWHM) and line asymmetry for all stars. We then extract correlations curves between radial velocity and asymmetry. A geometric model providing synthetic spectral lines, including limb-darkening, a constant FWHM (hereafter sigma_c) and the rotation velocity is used to interpret these correlations curves. For all stars, comparison between observations and modelling is satisfactory, and we were able to determine the projected rotation velocities and sigma_c for all stars. We also find a correlation between the rotation velocity (Vrot sin i) and the period of the star: Vrot sin i = (11.5 +- 0.9) log(P) + (19.8 +- 1.0) [km/s]. Moreover, we observe a systematic shift in observational asymmetry curves (noted gamma_O), related to the period of the star, which is not explained by our static model: gamma_O = (10.7+-0.1) log(P) + (9.7+-0.2) [in %] . For long-period Cepheids, in which velocity gradients, compression or shock waves seem to be large compared to short- or medium period Cepheids we observe indeed a greater systematic shift in asymmetry curves. (abridged)

Long baseline interferometry is now a mature technique in the optical domain. Current interferometers are however highly limited in number of sub apertures and concepts are being developed for future generations of very large optical arrays and especially with the goal of direct imaging. In this paper, we study the effects of introducing single-mode fibers in direct imaging optical interferometers. We show how the flexibility of optical fibers is well adapted to the pupil densification scheme. We study the effects of the truncation of the gaussian beams in the imaging process, either in the Fizeau mode or in the densified pupil mode or in the densified image mode. Finally, in the pupil densification configuration, we identify an optimum of the diaphragm width. This optimum maximizes the on-axis irradiance and corresponds to a trade-off between the loss of transmission and the efficiency of the densification.

We report on interferometric AMBER/VLTI observations of the recurrent nova RS Oph five days after its outburst on 2006 Feb 12. Using three baselines from 44 to 86m, and a spectral resolution of 1500, we measured the extension of the emission in the K band continuum and in the BrG and HeI2.06 micron lines. The continuum visibilities were interpreted by fitting simple geometric models consisting of uniform and Gaussian ellipses, ring and binary models. The visibilities and differential phases in the BrG line were interpreted using skewed ring models aiming to perform a limited parametric reconstruction of the extension and kinematics of the line forming region. The limited uv coverage does not allow discrimination between filled models and rings. Binary models are discarded because the measured closure phase in the continuum is close to zero. The visibilities in the lines are at a low level compared to their nearby continuum, consistent with a more extended line forming region for HeI2.06 than BrG. The ellipse models for the continuum and for the lines are highly flattened and share the same position angle. Two radial velocity fields are apparent in the BrG line: a 'slow' expanding ring-like structure (v~1800km/s), and a 'fast' structure extended in the E-W direction (v~2500-3000km/s). These results confirm the basic fireball model, contrary to the conclusions of other interferometric observations conducted by Monnier et al. (2006).

Aims. We study the geometry and kinematics of the circumstellar environment of the Be star Kappa CMa in the Br gamma emission line and its nearby continuum. Methods. We use the VLTI/AMBER instrument operating in the K band which provides a spatial resolution of about 6 mas with a spectral resolution of 1500 to study the kinematics within the disk and to infer its rotation law. In order to obtain more kinematical constraints we also use an high spectral resolution Pa beta line profile obtain in December 2005 at the Observatorio do Pico do Dios, Brazil and we compile V/R line profile variations and spectral energy distribution data points from the literature. Results. Using differential visibilities and differential phases across the Br gamma line we detect an asymmetry in the disk. Moreover, we found that kappa CMa seems difficult to fit within the classical scenario for Be stars, illustrated recently by alpha Arae observations, i.e. a fast rotating B star close to its breakup velocity surrounded by a Keplerian circumstellar disk with an enhanced polar wind. Finally we discuss the possibility for kappa CMa to be a critical rotator with a Keplerian rotating disk and try to see if the detected asymmetry can be interpreted within the "one-armed" viscous disk framework.

In this work, we present the first AMBER observations, of the Wolf-Rayet and O (WR+O) star binary system y2 Velorum. The AMBER instrument was used with the telescopes UT2, UT3, and UT4 on baselines ranging from 46m to 85m. It delivered spectrally dispersed visibilities, as well as differential and closure phases, with a resolution R = 1500 in the spectral band 1.95-2.17 micron. We interpret these data in the context of a binary system with unresolved components, neglecting in a first approximation the wind-wind collision zone flux contribution. We show that the AMBER observables result primarily from the contribution of the individual components of the WR+O binary system. We discuss several interpretations of the residuals, and speculate on the detection of an additional continuum component, originating from the free-free emission associated with the wind-wind collision zone (WWCZ), and contributing at most to the observed K-band flux at the 5% level. The expected absolute separation and position angle at the time of observations were 5.1&plusmn;0.9mas and 66&plusmn;15&deg; respectively. However, we infer a separation of 3.62+0.11-0.30 mas and a position angle of 73+9-11&deg;. Our analysis thus implies that the binary system lies at a distance of 368+38-13 pc, in agreement with recent spectrophotometric estimates, but significantly larger than the Hipparcos value of 258+41-31 pc.

In long baseline interferometry, the raw fringe contrast must be calibrated to obtain the true visibility and then those observables that can be interpreted in terms of astrophysical parameters. The selection of suitable calibration stars is crucial for obtaining the ultimate precision of interferometric instruments like the VLTI. We have developed software SearchCal that builds an evolutive catalog of stars suitable as calibrators within any given user-defined angular distance and magnitude around the scientific target. We present the first version of SearchCal dedicated to the bright-object case V<=10; K<=5). Star catalogs available at the CDS are consulted via web requests. They provide all the useful information for selecting of calibrators. Missing photometries are computed with an accuracy of 0.1 mag and the missing angular diameters are calculated with a precision better than 10%. For each star the squared visibility is computed by taking the wavelength and the maximum baseline of the foreseen observation into account.} SearchCal is integrated into ASPRO, the interferometric observing preparation software developed by the JMMC, available at the address: http://mariotti.fr.

AMBER is the first near infrared focal instrument of the VLTI. It combines three telescopes and produces spectrally resolved interferometric measures. This paper discusses some preliminary results of the first scientific observations of AMBER with three Unit Telescopes at medium (1500) and high (12000) spectral resolution. We derive a first set of constraints on the structure of the circumstellar material around the Wolf Rayet Gamma2 Velorum and the LBV Eta Carinae.

AMBER is the General User near-infrared focal instrument of the Very Large Telescope interferometer. Its specifications are based on three key programs on Young Stellar Objects, Active Galactic Nuclei central regions, masses and spectra of hot Extra Solar Planets. It has an imaging capacity because it combines up to three beams and very high accuracy measurement are expected from the spatial filtering of beams by single mode fibers and the comparison of measurements made simultaneously in different spectral channels.

Using our interferometric observations of seven classical Cepheids reported in Kervella et al. (2003, Paper I), complemented by previously existing measurements, we derive new calibrations of the Cepheids Period-Radius (P-R) and Period-Luminosity (P-L) relations. We obtain a P-R relation of log R = [0.767 +/- 0.009] log P + [1.091 +/- 0.011], only 1 sigma away from the relation obtained by Gieren et al. (1998). We therefore confirm their P-R relation at a level of Delta(log R) = +/- 0.02. We also derive an original calibration of the P-L relation, assuming the slopes derived by Gieren et al. (1998) from LMC Cepheids, alpha_K = -3.267 +/- 0.042 and alpha_V = -2.769 +/- 0.073. With a P-L relation of the form M = alpha (log P - 1) + beta, we obtain log P = 1 reference points of beta(K) = -5.904 +/- 0.063 and beta(V) = -4.209 +/- 0.075. Our calibration in the V band is statistically identical to the geometrical result of Lanoix et al. (1999).

Recent interferometric observations of the brightest and angularly largest classical Cepheid, L Carinae, with ESO's VLT Interferometer (VLTI) have resolved with high precision the variation of its angular diameter with phase. We compare the measured angular diameter curve to the one we derive by an application of the Baade-Wesselink type infrared surface brightness technique, and find a near-perfect agreement between the two curves. The mean angular diameters of L Car from the two techniques agree very well within their total error bars (1.5 %), as do the derived distances (4 %). This result is an indication that the calibration of the surface brightness relations used in the distance determination of far away Cepheids is not affected by large biases.

We report the angular diameter measurements of seven classical Cepheids (X Sgr, eta Aql, W Sgr, zeta Gem, beta Dor, Y Oph and L Car) that we have obtained with the VINCI instrument, installed at ESO's VLT Interferometer (VLTI). We also present reprocessed archive data obtained with the FLUOR/IOTA instrument on zeta Gem, in order to improve the phase coverage of our observations. We obtain average limb darkened angular diameter values of LD(X Sgr) = 1.471 +/- 0.033 mas, LD(eta Aql) = 1.839 +/- 0.028 mas, LD(W Sgr) = 1.312 +/- 0.029 mas, LD(beta Dor) = 1.891 +/- 0.024 mas, LD(zeta Gem) =1.747 +/- 0.061 mas, LD(Y Oph) = 1.437 +/- 0.040 mas and LD(L Car) = 2.988 +/- 0.012 mas. For four of these stars (eta Aql, W Sgr, beta Dor, and L Car) we detect the pulsational variation of their angular diameter. This enables us to compute directly their distances, using a modified version of the Baade-Wesselink method: d(eta Aql) = 276 [+55 -38] pc, d(W Sgr) = 379 [+216 -130] pc, d(beta Dor) = 345 [+175 -80] pc, d(L Car) = 603 [+24 -19] pc. The stated error bars are statistical in nature. Applying a hybrid method, that makes use of the Gieren et al. (1998) Period-Radius relation to estimate the linear diameters, we obtain the following distances (statistical and systematic error bars are mentioned): d(X Sgr) = 324 +/- 7 +/- 17 pc, d(eta Aql) = 264 +/- 4 +/- 14 pc, d(W Sgr) = 386 +/- 9 +/- 21 pc, d(beta Dor) = 326 +/- 4 +/- 19 pc, d(zeta Gem) = 360 +/- 13 +/- 22 pc, d(Y Oph) = 648 +/- 17 +/- 47 pc and d(L Car) = 542 +/- 2 +/- 49 pc.

We have built an infrared beam combiner for the GI2T/REGAIN interferometer of the Observatoire de la Cote d'Azur. The beam combiner allows us to record spectrally dispersed Michelson interference fringes in the near-infrared J-, H- or K-bands. The beam combiner has the advantage that Michelson interferograms can simultaneously be recorded in about 128 different spectral channels. The tilt of the spectrally dispersed fringes is a measure of the instantaneous optical path difference. We present the optical design of the beam combiner and GI2T/REGAIN observations of the Mira star R Cas with this beam combiner in the spectral range of 2.00 micron - 2.18 micron (observations on 22 and 25 August 1999; variability phase 0.08; V-magnitude approx. 6; seven baselines between 12m and 24m; reference stars Vega and Beta Peg). The spectrograph of the beam combiner consists of an anamorphotic cylindrical lens system, an image plane slit, and a grism. A system of digital signal processors calculates the ensemble average power spectrum of the spectrally dispersed Michelson interferograms and the instantaneous optical path difference error in real time. From the observed R Cas visibilities at baselines 12.0m, 13.8m and 13.9m, a 2.1 micron uniform-disk diameter of 25.3mas +/-3.3mas was derived. The unusually high visibility values at baselines >16m show that the stellar surface of R Cas is more complex than previously assumed. The visibility values at baselines >16m can be explained by high-contrast surface structure on the stellar surface of R Cas or other types of unexpected center-to-limb variations. The R Cas observations were compared with theoretical Mira star models yielding a linear Rosseland radius of 276Rsun +/-66Rsun and an effective temperature of 2685K+/-238K for R Cas at phase 0.08.