Metis is the first solar coronagraph designed for a space mission capable of performing simultaneous imaging of the off-limb solar corona in both visible and UV light. The observations obtained with Metis aboard the Solar Orbiter ESA-NASA observatory will enable us to diagnose, with unprecedented temporal coverage and spatial resolution, the structures and dynamics of the full corona from 1.7 $R_\odot$ to about 9 $R_\odot$. Due to the uniqueness of the Solar Orbiter mission profile, Metis will be able to observe the solar corona from a close vantage point (down to 0.28 AU), achieving out-of-ecliptic views with the increase of the orbit inclination over time. Moreover, observations near perihelion, during the phase of lower rotational velocity of the solar surface relative to the spacecraft, will allow longer-term studies of the coronal features. Thanks to a novel occultation design and a combination of a UV interference coating of the mirrors and a spectral bandpass filter, Metis images the solar corona simultaneously in the visible light band, between 580 and 640 nm, and in the UV H I Lyman-{\alpha} line at 121.6 nm. The coronal images in both the UV Lyman-{\alpha} and polarised visible light are obtained at high spatial resolution with a spatial scale down to about 2000 km and 15000 km at perihelion, in the cases of the visible and UV light, respectively. A temporal resolution down to 1 second can be achieved when observing coronal fluctuations in visible light. The Metis measurements will allow for complete characterisation of the main physical parameters and dynamics of the electron and neutral hydrogen/proton plasma components of the corona in the region where the solar wind undergoes acceleration and where the onset and initial propagation of coronal mass ejections take place, thus significantly improving our understanding of the region connecting the Sun to the heliosphere.

The Laser Interferometer Space Antenna is a foreseen space-based gravitational wave detector, which aims to detect 10^20 strains in the frequency range from 0.1 mHz to 1 Hz. It is a triangular constellation of three spacecraft, with equal sides of 2,5 x 10^9 m, where every spacecraft hosts a pair of telescopes that simultaneously transmit and receive laser beams measuring the constellation arms by heterodyning the received wavefronts with local references. Due to the spacecraft and constellation jitters, the interfering (received and local) wavefronts become misaligned. We investigate analytically the coupling between misalignments and aberrations of the interfering wavefronts and estimate the relevant contribution to the noise of the heterodyne signal.

The Laser Interferometer Space Antenna is a foreseen gravitational wave detector, which aims to detect $10^{-20}$ strains in the frequency range from 0.1 mHz to 1 Hz. It is a triangular constellation, with equal sides of $2,5 \times 10^9$ m, of three spacecraft, where heterodyne interferometry measures the spacecraft distances. The stray light from the powerful transmitted beam can overlap with the received one and interfere with the heterodyne signal. We investigated the contribution of random phase variations of the stray photons to the noise of the heterodyne signal. A balanced detection scheme more effectively mitigates this adverse effect than a separation of the frequencies of the transmitted and local radiation. In the balanced scheme, in order to limit the phase noise to picometer level, the incoherent power of the stray light must be kept below about 10 nW/W for an asymmetry of the recombination beam splitter of 1%.

We will describe the LAUE project, supported by the Italian Space Agency, whose aim is to demonstrate the capability to build a focusing optics in the hard X-/soft gamma-ray domain (80--600 keV). To show the lens feasibility, the assembling of a Laue lens petal prototype with 20 m focal length is ongoing. Indeed, a feasibility study, within the LAUE project, has demonstrated that a Laue lens made of petals is feasible. Our goal is a lens in the 80-600 keV energy band. In addition to a detailed description of the new LARIX facility, in which the lens is being assembled, we will report the results of the project obtained so far.

This paper summarizes the development of a successful project, LAUE, supported by the Italian Space Agency (ASI) and devoted to the development of long focal length (up to 100 m) Laue lenses for hard X--/soft gamma--ray astronomy (80-600 keV). The apparatus is ready and the assembling of a prototype lens petal is ongoing. The great achievement of this project is the use of bent crystals. From measurements obtained on single crystals and from simulations, we have estimated the expected Point Spread Function and thus the sensitivity of a lens made of petals. The expected sensitivity is a few $\times10^{-8}$ photons cm$^{-2}$ s$^{-1}$ keV$^{-1}$. We discuss a number of open astrophysical questions that can settled with such an instrument aboard a free-flying satellite.

We present the status of LAUE, a project supported by the Italian Space Agency (ASI), and devoted to develop Laue lenses with long focal length (up to 100 meters), for hard X--/soft gamma--ray astronomy (80-600 keV). Thanks to their focusing capability, the design goal is to improve the sensitivity of the current instrumention in the above energy band by 2 orders of magnitude, down to a few times $10^{-8}$ photons/(cm$^2$ s keV).

We present the LAUE project devoted to develop an advanced technology for building a high focal length Laue lens for soft gamma--ray astronomy (80-600 keV). The final goal is to develop a focusing optics that can improve the current sensitivity in the above energy band by 2 orders of magnitude.

The Fringe Sensor Unit (FSU) is the central element of the Phase Referenced Imaging and Micro-arcsecond Astrometry (PRIMA) dual-feed facility and provides fringe sensing for all observation modes, comprising off-axis fringe tracking, phase referenced imaging, and high-accuracy narrow-angle astrometry. It is installed at the Very Large Telescope Interferometer (VLTI) and successfully servoed the fringe tracking loop during the initial commissioning phase. Unique among interferometric beam combiners, the FSU uses spatial phase modulation in bulk optics to retrieve real-time estimates of fringe phase after spatial filtering. A R=20 spectrometer across the K-band makes the retrieval of the group delay signal possible. The FSU was integrated and aligned at the VLTI in summer 2008. It yields phase and group delay measurements at sampling rates up to 2 kHz, which are used to drive the fringe tracking control loop. During the first commissioning runs, the FSU was used to track the fringes of stars with K-band magnitudes as faint as m_K=9.0, using two VLTI Auxiliary Telescopes (AT) and baselines of up to 96 m. Fringe tracking using two Very Large Telescope (VLT) Unit Telescopes (UT) was demonstrated. During initial commissioning and combining stellar light with two ATs, the FSU showed its ability to improve the VLTI sensitivity in K-band by more than one magnitude towards fainter objects, which is of fundamental importance to achieve the scientific objectives of PRIMA.