sort results by

Use logical operators AND, OR, NOT and round brackets to construct complex queries. Whitespace-separated words are treated as ANDed.

Show articles per page in mode

Moriarty, Charles

Normalized to: Moriarty, C.

5 article(s) in total. 23 co-authors, from 1 to 4 common article(s). Median position in authors list is 2,0.

[1]  oai:arXiv.org:2006.14494  [pdf] - 2122156
Experimental validation of coronagraphic focal-plane wavefront sensing for future segmented space telescopes
Comments: 12 pages, 15 figures, Astronomy & Astrophysics
Submitted: 2020-06-25
Direct imaging of Earth-like planets from space requires dedicated observatories, combining large segmented apertures with instruments and techniques such as coronagraphs, wavefront sensors, and wavefront control in order to reach the high contrast of 10^10 that is required. The complexity of these systems would be increased by the segmentation of the primary mirror, which allows for the larger diameters necessary to image Earth-like planets but also introduces specific patterns in the image due to the pupil shape and segmentation and making high-contrast imaging more challenging. Among these defects, the phasing errors of the primary mirror are a strong limitation to the performance. In this paper, we focus on the wavefront sensing of segment phasing errors for a high-contrast system, using the COronagraphic Focal plane wave-Front Estimation for Exoplanet detection (COFFEE) technique. We implemented and tested COFFEE on the High-contrast imaging for Complex Aperture Telescopes (HiCAT) testbed, in a configuration without any coronagraph and with a classical Lyot coronagraph, to reconstruct errors applied on a 37 segment mirror. We analysed the quality and limitations of the reconstructions. We demonstrate that COFFEE is able to estimate correctly the phasing errors of a segmented telescope for piston, tip, and tilt aberrations of typically 100nm RMS. We also identified the limitations of COFFEE for the reconstruction of low-order wavefront modes, which are highly filtered by the coronagraph. This is illustrated using two focal plane mask sizes on HiCAT. We discuss possible solutions, both in the hardware system and in the COFFEE optimizer, to mitigate these issues.
[2]  oai:arXiv.org:1903.03192  [pdf] - 1845105
High-contrast Imager for Complex Aperture Telescopes (HiCAT): 6. Software Control Infrastructure and Calibration
Comments: 12 pages, 3 figures
Submitted: 2019-03-07
High contrast imaging using coronagraphy is one of the main avenues to enable the search for life on extrasolar Earth analogs. The HiCAT testbed aims to demonstrate coronagraphy and wavefront control for segmented on-axis space telescopes as envisioned for a future large UV optical IR mission (LUVOIR). Our software infrastructure enables 24/7 automated operation of high-contrast imaging experiments while monitoring for safe operating parameters, along with graceful shutdown processes for unsafe conditions or unexpected errors. The infrastructure also includes a calibration suite that can run nightly to catch regressions and track optical performance changes over time, and a testbed simulator to support software development and testing, as well as optical modeling necessary for high-contrast algorithms. This paper presents a design and implementation of testbed control software to leverage continuous integration whether the testbed is available or not.
[3]  oai:arXiv.org:1903.01638  [pdf] - 1842633
Phase-Retrieval-Based Wavefront Metrology for High Contrast Coronagraphy
Comments: 13 pages, 12 figures
Submitted: 2019-03-04
We discuss the use of parametric phase-diverse phase retrieval as an in-situ high-fidelity wavefront measurement method to characterize and optimize the transmitted wavefront of a high-contrast coronagraphic instrument. We apply our method to correct the transmitted wavefront of the HiCAT (High contrast imager for Complex Aperture Telescopes) coronagraphic testbed. This correction requires a series of calibration steps, which we describe. The correction improves the system wavefront from 16 nm RMS to 3.0 nm RMS.
[4]  oai:arXiv.org:1810.06478  [pdf] - 1766518
James Webb Space Telescope Optical Simulation Testbed V: Wide-field phase retrieval assessment
Comments: 13 pages, 6 figures
Submitted: 2018-10-15
The James Webb Space Telescope (JWST) Optical Simulation Testbed (JOST) is a hardware simulator for wavefront sensing and control designed to produce JWST-like images. A model of the JWST three mirror anas- tigmat is realized with three lenses in the form of a Cooke triplet, which provides JWST-like optical quality over a field equivalent to a NIRCam module. An Iris AO hexagonally segmented mirror stands in for the JWST primary. This setup successfully produces images extremely similar to expected JWST in-flight point spread functions (PSFs), and NIRCam images from cryotesting, in terms of the PSF morphology and sampling relative to the diffraction limit. The segmentation of the primary mirror into subapertures introduces complexity into wavefront sensing and control (WFS&C) of large space based telescopes like JWST. JOST provides a platform for independent analysis of WFS&C scenarios for both commissioning and maintenance activities on such ob- servatories. We present an update of the current status of the testbed including both single field and wide-field alignment results. We assess the optical quality of JOST over a wide field of view to inform the future imple- mentation of different wavefront sensing algorithms including the currently implemented Linearized Algorithm for Phase Diversity (LAPD). JOST complements other work at the Makidon Laboratory at the Space Telescope Science Institute, including the High-contrast imager for Complex Aperture Telescopes (HiCAT) testbed, that investigates coronagraphy for segmented aperture telescopes. Beyond JWST we intend to use JOST for WFS&C studies for future large segmented space telescopes such as LUVOIR.
[5]  oai:arXiv.org:1201.1687  [pdf] - 683840
Probing the magnetic fields of massive star forming regions with methanol maser polarisation
Comments: Accepted in MNRAS
Submitted: 2012-01-08
Methanol masers can provide valuable insight into the processes involved in high-mass star formation, however the local environment in which they form is still unclear. Four primary, yet conflicting, models have emerged to explain the commonly observed methanol maser structures at 6.67 GHz. These suggest that masers trace accretion disks, outflows, shock fronts or disks dominated by infall/outflows. One proposed means of testing these models is through mapping the local magnetic field structures around maser sources, which were predicted to lie parallel to shock and outflows and perpendicular to accretion disks. To follow up this suggestion we have determined magnetic field directions from full polarisation observations of 10 6.67-GHz sources. We find morphology that is parallel to the source structure, indicative of shocks or outflows, in five sources and perpendicular morphology indicative of disks in three. These results do not support any of the expected models and the diverse morphologies observed indicate that the masers could be emitting from different evolutionary stages or environments, or from a common local environment with complex associated magnetic fields. To resolve this conflict we suggest a new approach that will search the simulations of massive star formation, which are just becoming available, for suitable sites for maser emission.