Normalized to: Morgan, S.
[1]
oai:arXiv.org:1905.02790 [pdf] - 1885656
A Comparison of the Diffuser Method Versus the Defocus Method for
Performing High-Precision Photometry with Small Telescope Systems
Submitted: 2019-05-07, last modified: 2019-05-18
This paper compares the performance of two different high-precision,
photometric measurement techniques for bright (<11 magnitude) stars using the
small telescope systems that today's amateur astronomers typically use. One
technique is based on recent work using a beam-shaping diffuser method
(Stefansson et al., (2017).) The other is based on the widely used "defocusing"
method. We also developed and used a statistical photometric performance model
to better understand the error components of the measurements to identify and
quantify any difference in performance between the two methods. AstroImageJ
(Collins et al. (2017)) was used for the exoplanet image analysis to provide
the measured values and exoplanet models described in this study. Both methods
were used at the Mark Slade Remote Observatory (MSRO) to conduct in-transit
exoplanet observations of exoplanets HAT-P-30b/WASP-51b, HAT-P-16b, and a
partial of WASP-93b. Observations of exoplanets KELT-1b and K2-100b and other
stars were also performed at the MSRO to further understand and characterize
the performance of the diffuser method under various sky conditions. In
addition, both in-transit and out-of-transit observations of exoplanets
HAT-P-23b, HAT-P-33b, and HAT-P-34b were performed at the Conti Private
Observatory. We found that for observing bright stars, the diffuser method
outperformed the defocus method when using small telescopes with poor tracking.
We also found the diffuser method noticeably reduced the scintillation noise
compared with the defocus method and provided high-precision results in
typical, average sky conditions through all lunar phases. For small telescopes
using excellent auto-guiding techniques and effective calibration procedures,
we found the defocus method was equal to or in some cases better than the
diffuser method when observing with good-to-excellent sky conditions.
[2]
oai:arXiv.org:1704.04417 [pdf] - 1562827
Joint Elastic Side-Scattering Lidar and Raman Lidar Measurements of
Aerosol Optical Properties in South East Colorado
Wiencke, L.;
Rizi, V.;
Will, M.;
Allen, C.;
Botts, A.;
Calhoun, M.;
Carande, B.;
Claus, J.;
Coco, M.;
Emmert, L.;
Esquibel, S.;
Grillo, A. F.;
Hamilton, L.;
Heid, T. J.;
Iarlori, M.;
Klages, H. -O.;
Kleifges, M.;
Knoll, B.;
Koop, J.;
Mathes, H. -J.;
Menshikov, A.;
Morgan, S.;
Patterson, L.;
Petrera, S.;
Robinson, S.;
Runyan, C.;
Sherman, J.;
Starbuck, D.;
Wakin, M.;
Wolf, O.
Submitted: 2017-04-14
We describe an experiment, located in south-east Colorado, USA, that measured
aerosol optical depth profiles using two Lidar techniques. Two independent
detectors measured scattered light from a vertical UV laser beam. One detector,
located at the laser site, measured light via the inelastic Raman
backscattering process. This is a common method used in atmospheric science for
measuring aerosol optical depth profiles. The other detector, located
approximately 40km distant, viewed the laser beam from the side. This detector
featured a 3.5m2 mirror and measured elastically scattered light in a bistatic
Lidar configuration following the method used at the Pierre Auger cosmic ray
observatory. The goal of this experiment was to assess and improve methods to
measure atmospheric clarity, specifically aerosol optical depth profiles, for
cosmic ray UV fluorescence detectors that use the atmosphere as a giant
calorimeter. The experiment collected data from September 2010 to July 2011
under varying conditions of aerosol loading. We describe the instruments and
techniques and compare the aerosol optical depth profiles measured by the Raman
and bistatic Lidar detectors.
[3]
oai:arXiv.org:1702.04829 [pdf] - 1567683
Sports stars: analyzing the performance of astronomers at
visualization-based discovery
Submitted: 2017-02-15
In this data-rich era of astronomy, there is a growing reliance on automated
techniques to discover new knowledge. The role of the astronomer may change
from being a discoverer to being a confirmer. But what do astronomers actually
look at when they distinguish between "sources" and "noise?" What are the
differences between novice and expert astronomers when it comes to visual-based
discovery? Can we identify elite talent or coach astronomers to maximize their
potential for discovery? By looking to the field of sports performance
analysis, we consider an established, domain-wide approach, where the expertise
of the viewer (i.e. a member of the coaching team) plays a crucial role in
identifying and determining the subtle features of gameplay that provide a
winning advantage. As an initial case study, we investigate whether the
SportsCode performance analysis software can be used to understand and document
how an experienced HI astronomer makes discoveries in spectral data cubes. We
find that the process of timeline-based coding can be applied to spectral cube
data by mapping spectral channels to frames within a movie. SportsCode provides
a range of easy to use methods for annotation, including feature-based codes
and labels, text annotations associated with codes, and image-based drawing.
The outputs, including instance movies that are uniquely associated with coded
events, provide the basis for a training program or team-based analysis that
could be used in unison with discipline specific analysis software. In this
coordinated approach to visualization and analysis, SportsCode can act as a
visual notebook, recording the insight and decisions in partnership with
established analysis methods. Alternatively, in situ annotation and coding of
features would be a valuable addition to existing and future visualisation and
analysis packages.
[4]
oai:arXiv.org:astro-ph/0506348 [pdf] - 73748
[Fe/H] relations for c-type RR Lyrae Variables based upon Fourier
Coefficients
Submitted: 2005-06-15, last modified: 2006-12-15
[Fe/H] - phi_31 - log P relations are found for c-type RR Lyrae stars in
globular clusters. The relations are analogous to that found by Jurcsik &
Kovacs (1996) for field ab-type RR Lyrae stars, where a larger period
correlates with lower metallicity values for similar values of the Fourier
coefficient phi_31. The relations obtained here are used to determine the
metallicity of field c-type RR Lyrae stars, those within omega Cen, the LMC and
toward the galactic bulge. The results are found to compare favorably to
metallicity values obtained elsewhere.
[5]
oai:arXiv.org:astro-ph/9607068 [pdf] - 95010
Beat Cepheid Period Ratios from OPAL Opacities
Submitted: 1996-07-13, last modified: 1997-06-26
The discovery of a large number of beat Cepheids in the Large Magellanic
Cloud in the MACHO survey, provides an opportunity to compare the
characteristics of such Cepheids over a range of metallicities. We produced a
large grid of linear nonadiabatic pulsation models using the OPAL opacity
tables and with compositions corresponding to those of the Milky Way, and the
Large and Small Magellanic Clouds. Using the relationship between the period
ratio and the main pulsation period, we are able to define a range of models
which correspond to the observed beat Cepheids, and thereby constrain the
physical characteristics of the LMC beat Cepheids. We are also able to make
some predictions about the nature of the yet-to-be-discovered SMC beat
Cepheids.