Single-ended circuit topologies, and a theorem for the development thereof, are presented with which one may realize constant-resistance (or reflectionless) filters, having ideally zero reflection coefficient at all frequencies and from all ports, suitable for elliptic and pseudo-elliptic filter responses. The proposed theorem produces topologies of a type known as the coupled-ladder, which has been previously studied for only polynomial responses (e.g. Butterworth, Chebyshev, etc.). A comparison between these topologies and another classical approach known as the economy bridge reveals that those proposed here have a number of theoretical and practical advantages. The theory is tested by the construction of a sixth-order, low-pass reflectionless filter exhibiting a pseudo-elliptic frequency response. Measured results are in excellent agreement with theory, and show return loss better than 20 dB throughout the pass-band, the transition-band, and up to two octaves into the stop-band.

The next-generation Very Large Array (ngVLA) is an astronomical observatory planned to operate at centimeter wavelengths (25 to 0.26 centimeters, corresponding to a frequency range extending from 1.2 to 116 GHz). The observatory will be a synthesis radio telescope constituted of approximately 244 reflector antennas each of 18 meters diameter, and 19 reflector antennas each of 6 meters diameter, operating in a phased or interferometric mode. We provide a technical overview of the Reference Design of the ngVLA. This Reference Design forms a baseline for a technical readiness assessment and the construction and operations cost estimate of the ngVLA. The concepts for major system elements such as the antenna, receiving electronics, and central signal processing are presented.

Modifications of the authors' previously-published, generalized, lumped-element, reflectionless filter topologies are presented which remove the original constraints on the relative values of its prototype parameters. Thus, any transfer function which can be realized as the transmission or reflection coefficient of a conventional ladder prototype may now be implemented in reflectionless form --- that is, having the same transfer function in transmission but with identically zero reflection coefficient at both ports and at all frequencies from DC to infinity, given ideal elements. The theoretical basis of these modifications is explained, and then tested via the construction of passive, reflectionless low-pass filter prototypes that, in the prior topology, would have required negative reactive elements. The results show excellent agreement with theory.

The next-generation Very Large Array (ngVLA) is an astronomical observatory planned to operate at centimeter wavelengths (25 to 0.26 centimeters, corresponding to a frequency range extending from 1.2 GHz to 116 GHz). The observatory will be a synthesis radio telescope constituted of approximately 214 reflector antennas each of 18 meters diameter, operating in a phased or interferometric mode. We provide an overview of the current system design of the ngVLA. The concepts for major system elements such as the antenna, receiving electronics, and central signal processing are presented. We also describe the major development activities that are presently underway to advance the design.

A new 1.4 GHz 19-element, dual-polarization, cryogenic phased array feed (PAF) radio astronomy receiver has been developed for the Robert C. Byrd Green Bank Telescope (GBT) as part of FLAG (Focal L-band Array for the GBT) project. Commissioning observations of calibrator radio sources show that this receiver has the lowest reported beamformed system temperature ($T_{\rm sys}$) normalized by aperture efficiency ($\eta$) of any phased array receiver to date. The measured $T_{\rm sys}/\eta$ is $25.4 \pm 2.5$ K near 1350 MHz for the boresight beam, which is comparable to the performance of the current 1.4 GHz cryogenic single feed receiver on the GBT. The degradation in $T_{\rm sys}/\eta$ at $\sim$ 4 arcmin (required for Nyquist sampling) and $\sim$ 8 arcmin offsets from the boresight is, respectively, $\sim$ 1\% and $\sim$ 20\% of the boresight value. The survey speed of the PAF with seven formed beams is larger by a factor between 2.1 and 7 compared to a single beam system depending on the observing application. The measured performance, both in frequency and offset from boresight, qualitatively agree with predictions from a rigorous electromagnetic model of the PAF. The astronomical utility of the receiver is demonstrated by observations of the pulsar B0329+54 and an extended HII region, the Rosette Nebula. The enhanced survey speed with the new PAF receiver will enable the GBT to carry out exciting new science, such as more efficient observations of diffuse, extended neutral hydrogen emission from galactic in-flows and searches for Fast Radio Bursts.

In this paper, we describe the development of a new L-band (1.4 GHz) Cryogenic Phased Array Feed (PAF) system, referred to as the GBT2 array. Results from initial measurements made with the GBT2 array are also presented. The PAF was developed for the Green Bank Telescope (GBT) as part of the Focal L-band Array for the GBT (FLAG) project. During the first stage of the development work (Phase I), a prototype cryogenic 19 element dual-polarized array with "Kite" dipole elements was developed and tested on the GBT. The measured system temperature over efficiency ($T_{sys}/\eta$) ratio for the bore sight beam of the Kite array was 45.5 K at 1.55 GHz. The off-boresight $T_{sys}/\eta$ shows an increase by 13 K at an offset equal to the half power beam width (7$^{'}$.2 at 1.7 GHz). Our measurements indicate that the off-boresight degradation and field-of-view (FoV) limitation of the Kite array is simply due to the fixed array size. To increase the FoV, a new 19-element GBT2 array with larger array spacing was developed during FLAG Phase II. The frequency response of the array was optimized from 1.2 to 1.6 GHz. A system with larger cryostat, new low noise amplifiers (LNAs), down-conversion and digitization close to the front end, unformatted digital transmission over fiber, ROACH II based polyphase filter banks (PFBs) with bandwidth 150 MHz and a data acquisition system that records voltage samples from one of the PFB channels were all developed. The data presented here is processed off-line. The receiver temperature measured with the new system is 17 K at 1.4 GHz, an improvement $>$ 8 K over the previous Kite array. Measurements with the GBT2 array on the telescope are in progress. A real time 150 MHz beamformer is also being developed as part of an NSF-funded collaboration between NRAO/GBO/BYU \& West Virginia University (Beamformer Project) to support science observations.

The growing number of phased array feeds (PAF) being built for radio astronomy demonstrates an increasing need for low noise amplifiers (LNA) that are designed for repeatability, low noise, and ease of manufacture. Specific design features which help to achieve these goals include the use of unpackaged transistors (for cryogenic operation), single-polarity biasing, straight plug-in RF interfaces to facilitate installation and re-work, and the use of off-the shelf components. The focal L-band array for the Green Bank Telescope (FLAG) is a cooperative effort by Brigham Young University (BYU) and the National Radio Astronomy Observatory (NRAO) using warm dipole antennae and cryogenic Silicon Germanium Heterojunction Bipolar Transistor (SiGe HBT) LNAs. These LNAs have an in band gain average of 38 dB and 4.85 Kelvin average noise temperature. Although the FLAG instrument was the driving instrument behind this development, most of the key features of the design and the advantages they offer apply broadly to other array feeds, including independent-beam and phased, and for many antenna types such as horn, dipole, Vivaldi, connected-bowtie, etc. This paper will focus on the unique requirements array feeds have for low noise amplifiers and how amplifier manufacturing can accommodate these needs.

We report on the development and characterization of a compact, full-waveguide bandwidth (WR-10) signal source for general-purpose testing of mm-wave components. The MMIC-based multichip module is designed for compactness and ease-of-use, especially in size-constrained test sets such as a wafer probe station. It takes as input a cm-wave CW reference and provides a factor of three frequency multiplication as well as amplification, output power adjustment, and in-situ output power monitoring. It utilizes a number of custom MMIC chips such as a Schottky-diode limiter and a broadband mm-wave detector, both designed explicitly for this module, as well as custom millimeter-wave multipliers and amplifiers reported in previous papers.

The design, fabrication, and measurement of a coax to double-ridged waveguide launcher and horn antenna is presented. The novel launcher design employs two symmetric field probes across the ridge gap to minimize spreading inductance in the transition, and achieves better than 15 dB return loss over a 10:1 bandwidth. The aperture-matched horn uses a half-cosine transition into a linear taper for the outer waveguide dimensions and ridge width, and a power-law scaled gap in order to realize monotonically-varying cutoff frequencies, thus avoiding the appearance of trapped mode resonances. It achieves a nearly constant beamwidth in both E- and H-planes for an overall directivity of about 16.5 dB from 10-100 GHz.

This paper expands on the previously described reflectionless filters - that is, filters having, in principle, identically-zero reflection coefficient at all frequencies - by introducing a wide variety of new reflectionless structures that were not part of the original publication. In addition to extending the lumped-element derivation to include transmission line filters, this is achieved by the introduction of a novel method wherein the left- and right-hand side stop-band terminations are coupled to each other using a two-port sub-network. Specific examples of the sub-network are given which increase the stop-band attenuation per filter cell and steepen the cutoff response without disrupting the reflectionless property or increasing the insertion-loss in the pass-band. It is noteworthy that a common feature of all the structures derived by these methods is that most, if not all, of the reactive elements are of equal normalized value. This greatly simplifies the tuning requirements, and has facilitated their implementation as monolithic microwave integrated circuits (MMICs). A number of examples of MMIC reflectionless filters constructed in this way are presented and their results compared to the theory.

We report on the development of a prototype integrated receiver front-end that combines all conversions from RF to baseband, from analog to digital, and from copper to fiber into one compact assembly, with the necessary gain and stability suitable for radio astronomy applications. The emphasis in this article is on a novel digital data link over optical fiber which requires no formatting in the front-end, greatly reducing the complexity, bulk, and power consumption of digital electronics inside the antenna, facilitating its integration with the analog components, and minimizing the self-generated radio-frequency interference (RFI) which could leak into the signal path. Management of the serial data link is performed entirely in the back-end based on the statistical properties of signals with a strong random noise component. In this way, the full benefits of precision and stability afforded by conventional digital data transmission are realized with far less overhead at the focal plane of a radio telescope.

An analytical method for the visualization and prediction of trapped-mode resonances based on the dimensions of a dispersive microwave network is described. The method as explained is intuitive, easy to implement, and has proven itself to be a useful tool in the avoidance of problems associated with trapped modes prior to fabrication, as well as to correct those problems in designs where this design detail was overlooked.

The reflectionless filter cell described in this article alleviates many system problems associated with excess out-of-band gain, impedance mismatches, and component interactions. The simplest filter cell exhibits a third-order Inverse Chebyshev response with 14.47 dB peak stopband attenuation, and several can be cascaded for additional attenuation as needed. They are simple to design and easy to use - for much like small fixed attenuators ("pads"), they can be placed anywhere in the signal path desired without fear of causing unwanted standing waves, and instead reducing them where they already exist beyond the intended frequency range. Compared to conventional filter topologies with similar cutoff frequencies, they exhibit an order of magnitude greater amplitude and phase stability, ensuring accurate and repeatable complex gain in calibrated systems. Finally, the component requirements are moderate in value and minimal in number, easing their implementation while improving design yield, and extending the applicability of a given component technology beyond the normal range, both above and below.

The scattering parameters of generalized compact orthomode transducers using azimuthally-distributed field probes in a dual-mode waveguide are analyzed. Theoretical expressions constraining the mutual coupling between the probes are derived and evaluated for three- and four-probe orthomode transducers with and without a coaxial reference port for calibration injection. The mutual coupling is shown to be identically zero or cancel coherently in all cases, suggesting that radiometric receivers with the best possible system noise temperature may be realized using these topologies.

In this paper we present a novel class of compact orthomode transducers which use digital calibration to synthesize the desired polarization vectors while maintaining high isolation and minimizing mass and volume. These digital orthomode transducers consist of an arbitrary number of planar probes in a circular waveguide, each of which is connected to an independent receiver chain designed for stability of complex gain. The outputs of each receiver chain are then digitized and combined numerically with calibrated, complex coefficients. Measurements on two prototype digital orthomode transducers, one with three probes and one with four, show better than 50 dB polarization isolation over a 10 C temperature range with a single calibration.

A design methodology and synthesis equations are described for lumped-element filter prototypes having low-pass, high-pass, band-pass, or band-stop characteristics with theoretically perfect input- and output-match at all frequencies. Such filters are a useful building block in a wide variety of systems in which the highly reactive out-of-band termination presented by a conventional filter is undesirable. The filter topology is first derived from basic principles. Then the relative merits of several implementations and tunings are compared via simulation. Finally, measured data on low-pass and band-pass filter examples are presented which illustrate the practical advantages as well as showing excellent agreement between measurement and theory.

This article reports on the first step in a focused program to re-optimize radio astronomy receiver architecture to better take advantage of the latest advancements in commercial digital technology. Specifically, an L-Band sideband-separating downconverter has been built using a combination of careful (but ultimately very simple) analog design and digital signal processing to achieve wideband downconversion of an RFI-rich frequency spectrum to baseband in a single mixing step, with a fixed-frequency Local Oscillator and stable sideband isolation exceeding 50 dB over a 12 degree C temperature range.

Radio astronomy observations in the coming decade will require new levels of sensitivity while mapping large regions of space with much greater efficiency than is achieved with current telescopes. This requires new instrumentation with the greatest achievable sensitivity, dynamic range, and field of view. Receiver noise is quickly approaching fundamental limits at most radio wavelengths, so significant gains in sensitivity can only be made by increasing collecting area. Jointly, these requirements suggest using large arrays of smaller antennas, or many moderate-size antennas equipped with multi-beam arrays. The challenge is to develop receivers and wide bandwidth data transport systems which are lower cost, more compact, more reliable, lower weight, and more reproducible than the best current systems, with no compromise to performance. This can be achieved with a greater degree of component integration, extensive use of digital signal processing and transport, and replacement of functions currently performed in bulky waveguide and coaxial cable components with digital arithmetic and thin optical fibers. In this white paper, we outline the complete redesign and re-optimization of receiver architecture to take advantage of the latest advancements in commercial technology. This involves the seamless integration of the conversions from RF to baseband, from analog to digital, and from copper to fiber within a single receiver module.

This white paper offers cautionary observations about the planning and development of new, large radio astronomy instruments. Complexity is a strong cost driver so every effort should be made to assign differing science requirements to different instruments and probably different sites. The appeal of shared resources is generally not realized in practice and can often be counterproductive. Instrument optimization is much more difficult with longer lists of requirements, and the development process is longer and less efficient. More complex instruments are necessarily further behind the technology state of the art because of longer development times. Including technology R&D in the construction phase of projects is a growing trend that leads to higher risks, cost overruns, schedule delays, and project de-scoping. There are no technology breakthroughs just over the horizon that will suddenly bring down the cost of collecting area. Advances come largely through careful attention to detail in the adoption of new technology provided by industry and the commercial market. Radio astronomy instrumentation has a very bright future, but a vigorous long-term R&D program not tied directly to specific projects needs to be restored, fostered, and preserved.

The observations of Mars by the CRISM and OMEGA hyperspectral imaging spectrometers require correction for photometric, atmospheric and thermal effects prior to the interpretation of possible mineralogical features in the spectra. Here, we report on a simple, yet non-trivial, adaptation to the commonly-used volcano-scan correction technique for atmospheric CO_2, which allows for the improved detection of minerals with intrinsic absorption bands at wavelengths between 1.9-2.1 $\mu$m. This volcano-scan technique removes the absorption bands of CO_2 by ensuring that the Lambert albedo is the same at two wavelengths: 1.890 $\mu$m and 2.011 $\mu$m, with the first wavelength outside the CO_2 gas bands and the second wavelength deep inside the CO_2 gas bands. Our adaptation to the volcano-scan technique moves the first wavelength from 1.890 $\mu$m to be instead within the gas bands at 1.980 $\mu$m, and for CRISM data, our adaptation shifts the second wavelength slightly, to 2.007 $\mu$m. We also report on our efforts to account for a slight ~0.001 $\mu$m shift in wavelengths due to thermal effects in the CRISM instrument.

A cloud of gas collapsing under gravity will fragment. We present a new theory for this process, in which layers shocked gas fragment due to their gravitational instability. Our model explains why angular momentum does not inhibit the collapse process. The theory predicts that the fragmentation process produces objects which are significantly smaller than most stars, implying that accretion onto the fragments plays an essential role in determining the initial masses of stars. This prediction is also consistent with the hypothesis that planets can be produced by gravitational collapse.

The LOng-Range Reconnaissance Imager (LORRI) is the high resolution imaging instrument for the New Horizons mission to Pluto, its giant satellite Charon, its small moons Nix and Hydra, and the Kuiper Belt, which is the vast region of icy bodies extending roughly from Neptune's orbit out to 50 astronomical units (AU). New Horizons launched on January 19, 2006 as the inaugural mission in NASA's New Frontiers program. LORRI is a narrow angle (field of view=0.29 deg), high resolution (4.95 microrad pixels), Ritchey-Chretien telescope with a 20.8 cm diameter primary mirror, a focal length of 263 cm, and a three lens field-flattening assembly. A 1024 x 1024 pixel (optically active region), thinned, backside-illuminated charge-coupled device (CCD) detector is used in the focal plane unit and is operated in frame transfer mode. LORRI provides panchromatic imaging over a bandpass that extends approximately from 350 nm to 850 nm. LORRI operates in an extreme thermal environment, situated inside the warm spacecraft with a large, open aperture viewing cold space. LORRI has a silicon carbide optical system, designed to maintain focus over the operating temperature range without a focus adjustment mechanism. Moreover, the spacecraft is thruster-stabilized without reaction wheels, placing stringent limits on the available exposure time and the optical throughput needed to satisfy the measurement requirements.