SPHERE (Beuzit et al,. 2019) has now been in operation at the VLT for more than 5 years, demonstrating a high level of performance. SPHERE has produced outstanding results using a variety of operating modes, primarily in the field of direct imaging of exoplanetary systems, focusing on exoplanets as point sources and circumstellar disks as extended objects. The achievements obtained thus far with SPHERE (~200 refereed publications) in different areas (exoplanets, disks, solar system, stellar physics...) have motivated a large consortium to propose an even more ambitious set of science cases, and its corresponding technical implementation in the form of an upgrade. The SPHERE+ project capitalizes on the expertise and lessons learned from SPHERE to push high contrast imaging performance to its limits on the VLT 8m-telescope. The scientific program of SPHERE+ described in this document will open a new and compelling scientific window for the upcoming decade in strong synergy with ground-based facilities (VLT/I, ELT, ALMA, and SKA) and space missions (Gaia, JWST, PLATO and WFIRST). While SPHERE has sampled the outer parts of planetary systems beyond a few tens of AU, SPHERE+ will dig into the inner regions around stars to reveal and characterize by mean of spectroscopy the giant planet population down to the snow line. Building on SPHERE's scientific heritage and resounding success, SPHERE+ will be a dedicated survey instrument which will strengthen the leadership of ESO and the European community in the very competitive field of direct imaging of exoplanetary systems. With enhanced capabilities, it will enable an even broader diversity of science cases including the study of the solar system, the birth and death of stars and the exploration of the inner regions of active galactic nuclei.

The Wide-field High-resolution Infrared TElescope (WHITE) will be dedicated in the first years of its life to carrying out a few (well focused in terms of science objectives and time) legacy surveys. WHITE would have an angular resolution of ~0.3'' homogeneous over ~0.7 sq. deg. in the wavelength range 1 - 5 um, which means that we will very efficiently use all the available observational time during night time and day time. Moreover, the deepest observations will be performed by summing up shorter individual frames. We will have a temporal information that can be used to study variable objects. The three key science objectives of WHITE are : 1) A complete survey of the Magellanic Clouds to make a complete census of young stellar objects in the clouds and in the bridge and to study their star formation history and the link with the Milky Way. The interaction of the two clouds with our Galaxy might the closest example of a minor merging event that could be the main driver of galaxy evolution in the last 5 Gyrs. 2) The building of the first sample of dusty supernovae at z<1.2 in the near infrared range (1-5 um) to constrain the equation of state from these obscured objects, study the formation of dust in galaxies and build the first high resolution sample of high redshift galaxies observed in their optical frame 3) A very wide weak lensing survey over that would allow to estimate the equation of state in a way that would favourably compete with space projects.

Surveys provide a wealth of data to the astronomical community that are used well after their completion. In this paper, we propose a project that would take the maximum benefit of Dome C in Antarctica by performing two surveys, in the wavelength range from 1-5 micron, complementary to SNAP space surveys. The first one over 1000 sq. deg. (1 KdF) for 4 years and the second one over 15 sq. deg (SNAP-IR) for the next 4 years at the same time as SNAP 0.35-1.7 microns survey. By using a Ground-Layer Adaptive Optics system, we would be able to recover, at the ice level and over at least half a degree in radius, the 300 mas angular resolution available above the 30-m high turbulent layer. Such a survey, combining a high angular resolution with high sensitivities in the NIR and MIR, should also play the role of a pre-survey for JWST and ALMA.

A slicer mirror is a complex surface composed by many tilted and decentered mirrors sub-surfaces. The major difficulty to model such a complex surface is the large number of parameters used to define it. The Zemax's multi-configuration mode is usually used to specify each parameters (tilts, curvatures, decenters) for each mirror sub-surface which are then considered independently. Otherwise making use of the User-Defined Surface (UDS-DLL) Zemax capability, we are able to consider the set of sub-surfaces as a whole surface. In this paper, we present such a UDS-DLL tool comparing its performance with those of the classical multi-configuration mode. In particular, we explore the use of UDS-DLL to investigate the cross-talk due to the diffraction on the slicer array mirrors which has been a burden task when using multi-configuration mode.

A rationale is presented for the use of a relatively low-altitude Rayleigh Laser Guide Star to provide partial adaptive optics correction across a large fraction of the sky on the 4.2m William Herschel Telescope. The scientific motivation is highlighted and supported by model calculations. An overview the technical implementation of the system is presented.

We investigate whether a three-mirror system, having secondary and the tertiary mirrors with surfaces warped by Zernike polynomials generated by active vase mirrors, is suitable to do the corrections of a fixed parabolic mirror observing at large angles from the zenith. We obtain designs of correctors with remarkable images and control of the distortion of the field of the view contained within a field greater than 15 Deg.

We review the present status of liquid mirror telescopes. Interferometric tests of liquid mirrors (the largest one having a diameter of 2.5 meters ) show excellent optical qualities. The basic technology is now sufficiently reliable that it can be put to work. Indeed, a handful of liquid mirrors have now been built that are used for scientific work. A 3.7-m diameter LMT is presently being built in the new Laval upgraded testing facilities. Construction of the mirror can be followed on the Web site: http://astrosun.phy.ulaval.ca/lmt/lmt- home.html. Finally we address the issue of the field accessible to LMTs equipped with novel optical correctors. Optical design work, and some exploratory laboratory work, indicate that a single LMT should be able to access, with excellent images, small regions anywhere inside fields as large as 45 degrees.

We investigate the aspherization of an active mirror for correcting third and fifth-order aberrations. We use a stainless steel AISI 420 mirror with a controlled pressure load, two series of 12-punctual radial positions of force application distributed symmetrically in two concentric rings around the mirror. We obtain the wavefronts for Cv1, Sph3, Coma3, Astm3, Comatri, Astm5 aswell as those of the added wavefronts. Although this active prototype mirror has general uses, our goal is to compensate the aberrations of a liquid mirror observing at large angles from the zenith.

We discuss a family of two-mirror correctors that can greatly extend the field accessible to a fixed telescope such as a liquid mirror telescope. The performance of the corrector is remarkable since it gives excellent images in patches contained within a field greater than 45 degrees. We argue that this performance makes fixed telescopes competitive with tiltable ones.