Moreira, Walter
Normalized to: Moreira, W.
1 article(s) in total. 15 co-authors. Median position in authors list is 6,0.
[1]
oai:arXiv.org:1305.0309 [pdf] - 659091
The Influence of Motion and Stress on Optical Fibers
Murphy, Jeremy D.;
Hill, Gary J.;
MacQueen, Phillip J.;
Taylor, Trey;
Soukup, Ian;
Moreira, Walter;
Cornell, Mark E.;
Good, John;
Anderson, Seth;
Fuller, Lindsay;
Lee, Hanshin;
Kelz, Andreas;
Rafal, Marc;
Rafferty, Tom;
Tuttle, Sarah;
Vattiat, Brian
Submitted: 2013-05-01
We report on extensive testing carried out on the optical fibers for the
VIRUS instrument. The primary result of this work explores how 10+ years of
simulated wear on a VIRUS fiber bundle affects both transmission and focal
ratio degradation (FRD) of the optical fibers. During the accelerated lifetime
tests we continuously monitored the fibers for signs of FRD. We find that
transient FRD events were common during the portions of the tests when motion
was at telescope slew rates, but dropped to negligible levels during rates of
motion typical for science observation. Tests of fiber transmission and FRD
conducted both before and after the lifetime tests reveal that while
transmission values do not change over the 10+ years of simulated wear, a clear
increase in FRD is seen in all 18 fibers tested. This increase in FRD is likely
due to microfractures that develop over time from repeated flexure of the fiber
bundle, and stands in contrast to the transient FRD events that stem from
localized stress and subsequent modal diffusion of light within the fibers.
There was no measurable wavelength dependence on the increase in FRD over 350
nm to 600 nm. We also report on bend radius tests conducted on individual
fibers and find the 266 microns VIRUS fibers to be immune to bending-induced
FRD at bend radii of R > 10cm. Below this bend radius FRD increases slightly
with decreasing radius. Lastly, we give details of a degradation seen in the
fiber bundle currently deployed on the Mitchell Spectrograph (formally VIRUS-P)
at McDonald Observatory. The degradation is shown to be caused by a localized
shear in a select number of optical fibers that leads to an explosive form of
FRD. In a few fibers, the overall transmission loss through the instrument can
exceed 80%.